Professional Documents
Culture Documents
DATE 12th June 2020
REF APP‐LIST‐NDT
List of NDT & Inspection
Approved Training Organisations
CONTENTS
Part 1 – Accredited Non‐Destructive Testing (NDT) Courses Available Page 3
Part 2 – Courses outside the scope of PCN meeting specific criteria Page 18
Part 3 – Providers of individually designed level 3 training packages recognised by BINDT Page 22
1
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Foreword
Approval of Level 3 Training.
The BINDT Approval Panel, which reports to MQ&E (Membership, Qualification and Education Committee) routinely accredits training courses at Level 1 and 2.
Courses are approved as meeting specific requirements, (generally defined in terms of an examination syllabus) and the object of the exercise is to ensure that all
aspects of the syllabus are addressed within the training course at a suitable level and depth.
Most courses that are accredited will be for training prior to PCN examinations but that need not always be the case. For instance if an ATO has a requirement to
train candidates to perform a range of well defined tasks, then a training course could be designed, and subsequently accredited by BINDT as meeting those
requirements and would be listed under part 2 of the approval list.
The syllabus is well defined, therefore a training course can be designed to cover those areas of learning. This works well for Level 1 and Level 2 training but it
does not work at Level 3.
Level 3 courses need to be well versed in a very broad range of knowledge and the candidate should be familiar with Product Technology, the other four main NDT
methods, Procedure Writing and so on.
The way that we address this dilemma is to define three main requirements that training centres must meet if they are to be recognised as providers of Level 3
training:
1. The tutors must be Level 3 Certificated.
2. The training school must have available the defined Essential Reading material.
3. There must be a system in place whereby candidates are assessed on arrival, (or beforehand), in order to identify the gaps in their knowledge. The
training course must then be specifically designed to address those areas of weakness.
The course content must be designed as a bespoke product, suited to a particular individual. Any training establishment that meets the three requirements set
out above may request that BINDT recognises that they are capable of offering Level 3 training courses and once proven at audit can be listed under part 3 of the
approval list but will not be included on their certificate of approval.
2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
PART I
Accredited Non‐Destructive Testing (NDT) Courses Available
Note: Courses validated as suitable pre‐approval training for PCN examinations also broadly satisfy the General Theory and Product Technology requirements of
employer‐based schemes (e.g. NAS 410, EN 4179 and SNT TC 1A).
Any course offered under a company‐based certification scheme must also satisfy the requirements of the employer’s written practice and training programme.
It is the employer’s responsibility that any necessary company specific training that would fall outside the validated course syllabus and content is adequately
addressed. Condition Monitoring courses are in accordance with ISO18436 and CMGEN.
All courses listed below are approved as suitable preparation for the corresponding PCN examinations.
3
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
KEY TO CODES TO DEFINE SCOPE OF APPROVAL
Numbers in bold type indicate the certification level at which the course(s) are aligned.
Letter(s) indicate the product sector to which each course is aligned.
4
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
EAST ANGLIA – E‐learning
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Jessica Flint
Training Coordinator: Gary Jenkins
International School of Aerospace
T: +44 (0) 1603 260148
NDT
E: Jessica.flint@isandt.co.uk
Unit 2, Beech Avenue 1,2 1,2 1,2 1,2 1,2
E: Gary.Jenkins@isandt.co.uk
Taverham A A A A A
E: wayne.middleton@isandt.co.uk
Norwich
E: info@isandt.co.uk
NR8 6HW
W: www.isandt.co.uk
TWI Ltd ‐ Cambridge Contact: Michael Skerik
TOFD
Granta Park T: +44 (0) 1223 899 500
2 2 1,2 1,2 1,2 2
Abington E: michal.skerik@twi.co.uk
W,C W,C G W,F,C W,F,C F,A
Cambridge E: trainexam@twitraining.com
PA
CB21 6AL W: www.twitraining.com
Contact: Darren Allen‐Exton
Tri Service School of NDT Training Coordinator: Darren Allen‐Exton
71 (IR) Squadron, Building 716 Deputy Training Coordinator: Mark Silva
2 2 2 2 2
RAF Wittering E: Darren.Allen‐Exton561@mod.gov.uk
A A A A A
Peterborough E: Kevin.Silva212@mod.gov.uk
PE8 6HB T: +44 (0) 1780 417912
EAST of ENGLAND – GUIDED
RT RI CRT UT MT PT ET VT WI ACFM WAVE
Name of Approved Training Organisation & Contact Details
Contact: Samantha Wright
Aerospace Inspection Training Ltd Training Coordinator: Joanne Nair
1,2
Units 9 & 10 Takeley Business Centre T: +44 (0) 1279 870276
1,2a A 1,2 1,2 1,2
Dunmow Road E: samantha.wright@aerospacendt.co.uk 1,2
A A A A
Takeley, Essex E: joanne.nair@aerospacendt.co.uk
PA
CM22 6SJ E: Jayn.lone@aerospacendt.co.uk
W: www.aerospacendt.co.uk
5
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS – UK
EAST MIDLANDS –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
SERCO Limited
Room 130 Stephenson House Contact: Gerie Connors
RTC Business Park Telephone: 0330 109 8855 1,2
1,2, C,D
London Road Email: Geraldine.Connors@serco.com 1R
W,F,
Derby C,R
DE24 8UP
Sperry Rail (International) Ltd Contact: Damian Casson 1,2 1,2
Derwent House, RTC Business Park E: dcasson@sperryrail.com Automated & Automated
London Road, Derby E: James.Taylor@mail.sperryrail.com
Manual & Manual
Testing of Testing of
DE24 8UP T: 01332 404388 Rail Track Rail Track
6
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
NORTH EAST –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
NDT Centre (Oceaneering Inspection)
Contact: Geoff Mason
109 Bowesfield Lane 2 2 2 2 2
T: +44 (0) 1642 604 661
Stockton‐on‐Tees W W W W W
E: gmason@oceaneering.com
TS18 3HF
TWI Technology and Training Centre 2
Contact: Michal Skerik
(North East) F,A
T: +44 (0) 1642 216320 2 2 1,2 2 2 2
Ferrous Road
E: michal.skerik@twi.co.uk W,F,C W,C G W W,F,C W,F,C
Riverside Park 1,2
W: www.twitraining.com
Middlesbrough Wf
TS2 1DJ
Advanced Industrial Solutions Ltd
3 & 4 Jupiter Court Contact: Emma Howorth
Orion Business Park T: +44 (0)844 800 1810 1,2 1,2 1,2 1,2 1,2 1,2
Tyne Tunnel Trading Estate E: emma.howorth@aisgroup.co.uk W,F W,F,C W,F,C W W,F,C
Newcastle Upon Tyne
NE29 7SE
7
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
NORTH WEST –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Lynn Brodie
Talon NDT Blackpool Ltd
Training Coordinator: Ian Judge
1 & 2 Keystone Court 2
E: lynnbrodie@talonndtblackpool.com 1,2 1,2 1,2 1,2
Hallam Way, Blackpool W
E: ian.judge@talonndt.com W,F W,F,C W,F,C W
Lancashire
T: +44 (0) 1253 696400
FY4 5NZ
W: www.talonblackpool.com
SCOTLAND – RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Name of Approved Training Organisation & Contact Details
Fife College Contact: Peter McPherson
Future Skills Centre, Stenton Road T: +44 (0) 1592 223 355/223 387 1,2
2 2 1,2 1,2 1,2 2
Glenrothes E: petermcpherson@fife.ac.uk W,F,C
W W W W,F,C W,F,C
Fife E: tifferyjen@gmail.com
KY6 2RA W: www.fife.ac.uk/
Array Training Limited Contact: Ray Wilson/Ashleigh Sutherland 1,2
Hareness Circle Training Coordinator: Ray Wilson W
Aberdeen T: +44 (0) 1224 890806 Basic 1,2
AB12 3LY E: Ray.Wilson@arraytraining.com
2 1,2 1,2 1,2
1,2 ISI UT
Rad W W,F W,F W,F W
E: Ashleigh.sutherland@arraytraining.com Safety
E: info@arraytraining.com
W: www.arraytraining.com
8
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
SCOTLAND – cont’d… RT RI CRT UT MT PT ET VT WI ACFM
Talon NDT Ltd
Unit 6, Murcar Commercial Park 1,2
Contact: Ian Judge W 2
Denmore Road 1,2 1,2 1,2 1,2
T: +44 (0) 1224 822 251 Basic
Bridge of Don W
E: info@talonndt.co.uk W,F W,F,C W,F,C W
Aberdeen Rad
W: www.talonndt.co.uk
AB23 8JW Safety
Contact: Andrew Jeffreys
TWI Aberdeen
Training Coordinator: Michal Skerik
Unit 20 Spires Business Centre, 1,2
T: +44 (0) 1224 691 222 2 1,2 1,2 1,2 1,2
Mugiemoss Road, Bucksburn G
E: andrew.jeffreys@twi.co.uk W,C W W,F,C W,F,C W
Aberdeen
E: michal.skerik@twi.co.uk
AB21 9BG
W: www.twitraining.com
WALES –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Michelle Clapham/John Coldman
South West School of NDT Training Coordinator: Tony Wellington
Longwood Drive E: jon.coldman@minton.co.uk 1,2 1,2 1,2
1,2 2 1,2 1,2
Forest Farm E: training@minton.co.uk W,F,C, W,F,C, 2
W,A W A,W A,F W,F,C
Cardiff E: tony.wellington@minton.co.uk A A
CF14 7HY T: +44 (0) 292 054 0000
W: www.swsndt.co.uk
Testia Ltd Contact: Adnan Rahman
Airbus Main Gate Training Coordinator: Grayson Jones
Golf Course Lane T: 01179 361 242 1,2 1,2 1,2 1,2 1,2
Building 07A, Filton, E: rakibur.rahman@airbus.com A A A A A
Bristol E: grayson.jones@airbus.com
BS34 7QQ W: www.testia.com
9
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
WEST MIDLANDS –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Linda Dulay
NDT Consultants Ltd Training Coordinator: Mike Reilly
Middlemarch House T: +44 (0) 24 7651 1151
1,2 1,2 1,2 1,2 1,2
Siskin Drive E: Linda@ndt‐consultants.co.uk
A F,C,A F,C,A F,C,A F,C,A
Coventry E: Mike@ndt‐consultants.co.uk
CV3 4FJ E: sales@ndt‐consultants.co.uk
W: www.ndt‐consultants.co.uk
YORKSHIRE & HUMBER –
RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Name of Approved Training Organisation & Contact Details
IMechE Argyll Ruane Contact : David Griffin
1,2
4 Europa View T: + 44 7778 157459 1,2 1,2 1,2 1,2
Sheffield Business Park T: + 44 114 399 5720 W,F,
2
W,F,
W,F,C
W,F,C, W,F,C,
1,2 1,2
1,2
ISI UT
W,C TOFD W W,F,C
Sheffield E: David.Griffin@IMECHE.org C C R R
PA
S9 1XH W: http://argyllruane.imeche.org
1,2
W,F,C 1,2
Lavender International NDT
Contact: Beverley Scott F g
Consultancy Services Limited 1,2 1,2
T: +44 (0) 1226 765 769 2 1,2 1,2 1,2 1,2
Unit 7, Penistone Station
E: enquiries@lavender‐ndt.com
W,F,
W,C
W,F,
TOFD‐ W,F,C W,F,C W,F,C
2
W
ISI UT
Sheffield C C
W: www.lavender‐ndt.com W 1,2
S36 6HP
PA ‐ W e
W,F,C
LIBERTY STEEL Contact: Mr John Barker
Stocksbridge T: +44 (0) 1142 832 071
1,2
Sheffield E: john.barker@specialityuk.com
S36 2JA W: www.libertyspecialitysteels.com
10
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE
AUSTRALIA – RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Name of Approved Training Organisation & Contact Details
ATTAR Contact: Paul Grosser
Unit 1, 64 Bridge Road T: +61 3 9574 6144 2 2 2 2
Keysborough, Victoria E: paulgrosser@attar.com.au W W W,F,C W,F,C
3173 Australia W: www.attar.com.au
TCS NDT Contact: Elise Cronin
1,2
Tafe, Perth Campus, Building 2, Training Coordinator: Alisa Hewling 1,2
W1,2 1,2
Room, 1‐35, 30 Aberdeen Street, T: +61 (0) 426 684 822
Basic
TOFD
1,2 1,2 ISI UT
E: elise@tcsndt.com.au W,F,C W,F,C W
Perth, Western Australia 6000 Rad PA (W)
E: alisa@tcsndt.com.au
Safety
W: www.tcsndt.com.au
CHINA (PEOPLE’S REPUBLIC) – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
SGS (Shanghai) NDT Training &
1,2
Examination Centre Contact: Sophia Bian 1,2
W,F,C
SGS‐CSTC Standards Technical Services M: +44 7825 099176 W,C 2 1,2 1,2 1,2
Co Ltd, 2F, Building 8, No 69, 1159 East E: Sophia.bian@sgs.com 1,2 W,Cb W,F,C W,F,C W,F,C
TOFD
Kangqiao Road, Pudong District, W: www.sgs.com C
PA (W)
Shanghai 201319, P.R. China
Taikoo (Xiamen) Aircraft Engineering 1,2 1,2 1,2 1,2
Contact: Lei Yue
Co.Ltd A A 1,2 A
E: leiyue@haeco.com
Guandian Second Road, Huli District, A
T: (86) 592 5737 290
Xiamen 361006
1,2
Xiamen United Technology Center Ltd Contact: Raymond Ho 1,2
1,2 1,2 1,2
Wu Han Building, 261 Jai He Lu, Building E: utc.raymond@yahoo.com.hk A
A A A A
1, Room 9C, Xiamen P.R.C T: (86) 592‐5083118 PA (W)
11
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
CARIBBEAN – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
NDE Institute of Trinidad Ltd Contact: Sonny James
15 Robertson Street, T: (868) 653 9343
Les Efforts East, T: (868)‐657‐6572
1,2 1,2 1,2
San Fernando, Trinidad W.I. E: sjames@learnndt.com
W W,F,C W,F,C
E: loriann.keane@gmail.com
E: info@learnndt.com
W: www.learnndt.com
GREECE – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
IVEPE‐SEV Contact: Mr Thanos Totsikas 2
143 Liossion & 6 Theirsiou Str. T: +30 210 8257 817 W 1,2 1,2 1,2 1,2
Attikis Square
E: thtotsikas@ivepe.gr W W,F,C W,F,C W,F,C
10445 Athens W: www.ivepe.gr
Greece
1,2
W
‘PLATE’
Contact: Athena Xirofotu F,C
TQCC/Lavender Greece Training Coordinator: Dimitrios G. Pitteris
Z Pigis 51 T: +30 24210 59881 1,2 2 PA 1,2 1,2 1,2 1,2 1,2
2
382 22 Volos Magnesia E: info@tqcc.gr W,C W,C W,F,C W,F,C W,F,C W,F,C W,F,C
Greece E: dpit@tqcc.gr
W: www.tqcc.gr TOFD
1,2
W,F,C
12
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
GREECE – Cont’d….. RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
TQCC/Lavender Greece Contact: Athena Xirofotu
W
Training Coordinator: Dimitrios G. Pitteris 2 1,2
G. Papandreou 150, 14452 Metamorfosi, ,2 ‘PLATE’ 1,2 1,2 1,2
E: info@tqcc.gr F 2
Athens, Greece W W F,C W,F,C W,F,C W,F,C
E: dpit@tqcc.gr
T: +3024210 59881
PA 1,2
INDIA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2 ,3
Noble Quality Evaluation Private Ltd Contact: Mr Ramesh Narayanasamy 1,2 W
Plot no. 20 & 21, Anjaneya Nagar (Near T: +91 822 095 4947 W 2 1,2 1,2
Miet), Gundur (Post), Tiruchirapalli, E: nobleqe@gmail.com BRS W b TOFD W,F,C W,F,C
620007, Tamil Nadu, India W: www.nobleqe.com RPS PA (W)
1,2,3
BIT inspection Technology Contact: Rajamanickam Baskar
W
No. 11, 6th Pillaiyar Koil Street, Ambal Training Coordinator: P. Ezhilarasan
1,2 2 1,2 1,2 2 2
T: +91 98408 00863
Nagar, Ekkatthuthangal, Chennai W W TOFD W W,F,C W,F,C W
E: rbaskar@bitndtindia.com
India 600032 PA (W)
E: ezhil@bitndtindia.com
1,2
Smart Technocrats and Consultancy
Contact: Sunil Mukul W
Services (I) Pvt. Ltd
T: +91 22 2770 6055 1,2 2 1,2 1,2
Plot No. 5ector 18A, Nerul, Navi,
E: sunilmukul@redifmail.com W W b TOFD W W
Mumbai, India 400706
E: smartndt@vsnl.com PA (W)
Contact: Siraj H Masroor & Abdul Aziz 1,2,3
A Star Training & Consultancy Pvt Ltd Training Coordinator: Jiyavudeen Musthafa W
“Shree” Building, 47/11‐1 Devadi T: +91 44 2495 0082
2 1,2 1,2
Street, Off Kutchery Road Near More E: siraj@astar‐training.com TOFD
W W W
Supermarket, Mylapore, Chennai E: aziz@astar‐training.com 1,2,3
600004 Tamil Nadu, India E: jiyavudeen@astarindia.in PA (W)
1,2,3
13
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
INDIA Cont’d ‐
Name of Approved Training Organisation & Contact Details RT RI CRT UT MT PT ET VT WI ACFM
ROYAL TECH TRAINING & Training Coordinator: Raja suhas 1,2
CONSULTANCY E: royaltechpcn@gmail.com W
Plot no A75, Opp Petrol Pump, VUDA 2 1,2 1,2
Website: www.royaltechndt.com TOFD
colony, Wb W W
T: +91 7732069014 / +91 886276888 PA (W)
gopalapatnam, Visakapatnam‐ 530027
Andrapradesh, India
Trichy Institute for Welding
M.S.A Complex, 1st Floor, Rail Nagar.
1,2
Ariyamangalam, Contact: Prabu Venkatachalapathy
1,2 2 W 1,2 1,2
Trichy, T: +914312442118
W W UTPA W W
620010 E: tiwpcnaudit@gmail.com
1,2
Tamil Nadu
India
INDONESIA – CRT ER VT ACFM
RT RI UT MT PT WI
Name of Approved Training Organisation & Contact Details
Contact: Hendra Wijaya
Indonesia Institute of NDT (IINDT) E: hendra@iindt.com for Training Coordinator
Trikarsa Equalita, Block C, No 12, Sei E: admin@iindt.com for courses 2 1,2 1,2 1,2
1,2
Panas, Batam, Indonesia 29433 E: vincent@iindt.com for examinations W W W,F,C W,F,C
T: +62 778 472 122
14
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
MALAYSIA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Ruane‐TATI Sdn Bhd (Terengganu Advanced
Contact: Azmil Mohamad
Technical Institute) 1,2
T: +609 863 1033 2 1,2 1,2 1,2 1,2
PT 4847, Jalan Panchor, Telok Kalong, 24000
E: azmil.mohamad@ruane‐tati.com W b & l W W,F,C W,F,C W
Kemaman, Terengganu
W: www.ruane‐tati.com
Malaysia
MINDT TRAINING & CERTIFICATION SDN BHD 1,2
Contact: Tan Hendry
No 18 Jalan Tanjung 13/2, Bandar Sri 1,2 1,2 1,2 1,2
E: hendry@mindt.com.my
Damansara, 52200, Kuala Lumpur, Malaysia W W W W W
T: + 603 6280 3448
SINGAPORE – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Siraj H Masroor
Altair Engineering Inspections Pte. Ltd 1,2
T: +65 6465 0877
#05‐109 18 Boon Lay Way 2 W
E: siraj@altairengg.com
Tradehub 21 W b TOFD
E: astar@astar‐training.com
Singapore, 609966 PA
W: www.astar‐training.com
Contact: Sze Thiam Siong
Training Coordinator: See Wah Kiaw
1,2
SETSCO Services PTE Ltd T: +65 6566 7777 1,2 1,2 1,2
1,2 W,A
18 Teban Gardens Crescent, Singapore E: nahhs@setsco.com W,F,C, W,F,C, A
W,A
608925 E: marketing@setsco.com A A
PA
E: seewk@setsco.com
W: www.setsco.com
15
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
SOUTH AFRICA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Debbie Myburgh
African NDT Centre (Pty) Ltd 1,2
Training Coordinator: Evashan Maistry‐Thavar
520 van Ryneveld Avenue W
T: +27 (0) 12 665 3248 1,2 2 1,2 1,2 1,2 1,2
Pierre van Ryneveld Park 1,2
E: debbie.myburgh@andtc.com W W W,F,C W,F,C W1 W,F,C
Centurion PA
E: evashan.thavar@andtc.com
0045 W,F,C
W: www.andtc.com
Contact: Nish Kanaye
Non‐Destructive Academy of South
T: +27 (0) 31 708 3433
Africa CC (NASA Durban branch) 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2
E: nish@nondestructive.co.za
3 Pastoll Road, Sarnia 3610, Durban, W W W W W W W W
E: academy@nondestructive.co.za
South Africa
W: www.nondestructive.co.za
THAILAND – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
W
Contact: Gaurav Kaushik
Astar – Thailand
T: +66 38 691 152/3 2 PA (W)
41/19 Sermsuwan Road,
E: gaurav@astar‐training.com
Wb
1,2
T.Maptaphut A Muangrayong,
W: www.astar‐training.com
Rayong 21150
TOFD
1,2
16
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
UNITED ARAB EMIRATES UAE –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
W
Contact: Babu Sajeesh Kumar
WENS TECHNICAL AND OCCUPATIONAL
Training Coordinator: Mr. R. Raghunathan
SKILLS TRAINING LLC TOFD
T: +971 4554 6284
2 2 1,2 1,2 1,2
PO BOX 393179, Unit 2F‐A‐02, Empire T: +971 5624 28507 1,2
W W,C W W,F,C W,F,C
Heights, Tower A, Business Bay, Dubai, E: wensdubai@gmail.com
UAE E: admin@wensdubai.com
PA(UT)
E: raghu@wensdubai.com
1,2
W,F,C
USA ‐ RT RI CRT UT MT PT ET VT WI ACFM
ISI UT
Name of Approved Training Organisation & Contact Details
LAVENDER INTERNATIONAL NDT Contact: Michelle Chapman
1,2 1,2
University Business Park, Suite G. Training coordinator: Ian Griffin
1,2 W,F,C F g 1,2
T: +44 (0) 1226 765 769
15200 Middlebrook Dr. 1,2 2 1,2 1,2 1,2 ISI UT
E: michelle@lavender‐ndt.com W,F,C W,F,C 2
Houston Texas W,F,C W,C TOFD W,F,C W,F,C
E: ian@lavender‐ndt.com 1,2
77058 PA –
E: david@lavender‐ndt.com W e
United States W,F,C
W: www.lavender‐ndt.com
17
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
PART 2
Courses listed below have been independently accredited as meeting specific criteria (generally outside the scope of PCN)
Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated
training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.
Training Organisation Contact Method(s)
Contact: Samantha Wright
Aerospace Inspection Training Ltd Training Coordinator: Joanne Nair Infrared Thermography (Aero)
Units 9 & 10 Takeley Business Centre Dunmow Road T: +44 (0) 1279 870276 Acid Etch Inspection
Takeley, Stansted Airport E: samantha.wright@aerospacendt.co.uk Bond Testing of structures using the Staverley
Bishop’s Stortford E: joanne.nair@aerospacendt.co.uk Bondmaster
Essex, CM22 6SJ E: Jayn.lone@aerospacendt.co.uk
W: www.aerospacendt.co.uk
PT Rail Upgrade
Acid Etch Inspection
26 week
Hardness Testing
IMechE Argyll Ruane NDT/Inspection
Contact: David Griffin Conductivity Testing
4 Europa View Training Programme
T: + 44 7778 157459 Ultrasonic Testing of
Sheffield Business Park
T: + 44 114 399 5720 BGAS Transition to
Wrought Plate
Sheffield PCN Weld Inspector
E: David.Griffin@IMECHE.org including Thickness
S9 1XH level 2
W: http://argyllruane.imeche.org Gauging (ISO 20807)
Infrared
Anodic Testing
Thermography level
MT Rail Upgrade
1 (SNT‐TC‐1A)
18
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Training Organisation Contact Method(s)
Contact: Jessica Flint
International School of Aerospace NDT Training Coordinator: Gary Jenkins
Unit 2, Beech Avenue T: +44 (0) 1603 260148
Taverham E: Jessica.flint@isandt.co.uk
Infrared Thermography (Aero)
Norwich E: Gary.Jenkins@isandt.co.uk
NR8 6HW E: wayne.middleton@isandt.co.uk
E: info@isandt.co.uk
W: www.isandt.co.uk
Conductivity Testing
Eddy Current Testing
Lavender International NDT Contact: Beverley Scott Anodic Flaw Detection
of Non‐Ferromagnetic
Unit 7, Penistone Station T: +44 (0) 1226 765 769 Composite Materials
Tubes
Sheffield E: enquiries@lavender‐ndt.com (courses also available
Acid Etch Inspection
S36 6HP W: www.lavender‐ndt.com at TQCC/Lavender
Hardness Testing
Greece)
Profile Radiography GE Rad View Software Specific
NDT Centre (Oceaneering Inspection)
Contact: Geoff Mason Computed Radiography GE Rad View Software
109 Bowesfield Lane
T: +44 (0) 1642 604 661 Specific
Stockton‐on‐Tees
E: gmason@oceaneering.com Ultrasonic Time of Flight Diffraction (Basic and
TS18 3HF
Advanced)
Contact: Linda Dulay
Training Coordinator: Mike Reilly Acid Etch Inspection Visual Inspection
NDT Consultants Ltd
T: +44 (0) 24 7651 1151 Anodic Flaw Coating Thickness
Middlemarch House, Siskin Drive
E: Linda@ndt‐consultants.co.uk Detection
Coventry measurement
E: Mike@ndt‐consultants.co.uk Conductivity Testing
CV3 4FJ Bond Testing
E: sales@ndt‐consultants.co.uk Hardness Testing
W: www.ndt‐consultants.co.uk
Contact: Michelle Clapham/John Coldman
Acid Etch Inspection
South West School of NDT Training Coordinator: Tony Wellington
Hardness Testing
Merton House E: jon.coldman@minton.co.uk
Conductivity Testing
Croescadarn Close E: training@minton.co.uk
Anodic Testing
Pentwyn E: tony.wellington@minton.co.uk
Laser Shearography (Aero)
Cardiff, CF23 8HF T: +44 (0) 292 054 0000
W: www.swsndt.co.uk Infrared Thermography (Aero)
Sperry Rail (International) Ltd Contact: Damian Casson
Derwent House, RTC Business Park London Road, Derby E: dcasson@sperryrail.com Automated & Manual Testing of Rail Track (SNT‐TC‐
DE24 8UP E: James.Taylor@mail.sperryrail.com 1A)
T: 01332 404388
TQCC/Lavender Greece Contact: Athena Xirofotu
UT Castings (SNT)
Z Pigis 51 Training Coordinator: Dimitrios G. Pitteris
RI/RT Castings (SNT)
382 22 Volos T: +30 24210 59881
19
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Training Organisation Contact Method(s)
Greece E: info@tqcc.gr
E: dpit@tqcc.gr
W: www.tqcc.gr
Contact: Elise Cronin
Training Coordinator: Alisa Hewling
TCS NDT
T: +61 (0) 426 684 822
19 Weymouth Boulevard, Quinn’s Rocks, Perth WA Critical Ultrasonic Assessment of Welds Defects
E: elise@tcsndt.com.au
Australia 6030
E: alisa@tcsndt.com.au
W: www.tcsndt.com.au
Contact: Darren Allen‐Exton
Tri Service School of NDT
Training Coordinator: Darren Allen‐Exton
71 (IR) Squadron, Building 716
Deputy Training Coordinator: Mark Silva
RAF Wittering 10 week Aerospace NDT Technicians Course
E: Darren.Allen‐Exton561@mod.gov.uk
Peterborough
E: Kevin.Silva212@mod.gov.uk
PE8 6HB
T: +44 (0) 1780 417912
Contact: Andrew Jeffreys
TWI Aberdeen Training Coordinator: Michal Skerik
Unit 20 Spires Business Centre T: +44 (0) 1224 691 222 Ultrasonic Testing of Wrought Plate including
Mugiemoss Road, Bucksburn E: andrew.jeffreys@twi.co.uk Thickness Gauging (ISO 20807)
Aberdeen, AB21 9BG E: michal.skerik@twi.co.uk
W: www.twitraining.com
TWI – Cambridge Contact: Michael Skerik
Granta Park T: +44 (0) 1223 899 500
Ultrasonic Testing of Wrought Plate including
Abington E: michal.skerik@twi.co.uk
Thickness Gauging (ISO 20807)
Cambridge E: trainexam@twitraining.com
CB21 6AL W: www.twitraining.com
TWI Technology and Training Centre (North East)
Contact: Michal Skerik
Ferrous Road
T: +44 (0) 1223 899500 Ultrasonic Testing of Wrought Plate including
Riverside Park
E: trainexam@twitraining.com Thickness Gauging (ISO 20807)
Middlesbrough
W: www.twitraining.com
TS2 1DJ
Contact: Sonny James
NDE Institute of Trinidad Ltd T: (868) 653 9343
15 Robertson Street, T: (868)‐657‐6572
Ultrasonic Testing of Wrought Plate including
Les Efforts East, E: sjames@learnndt.com
Thickness Gauging (ISO 20807)
San Fernando, E: loriann.keane@gmail.com
Trinidad W.I. E: info@learnndt.com
W: www.learnndt.com
20
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Training Organisation Contact Method(s)
Contact: Lynn Brodie
Talon NDT Blackpool Ltd
Training Coordinator: Ian Judge
1 & 2 Keystone Court
E: lynnbrodie@talonndtblackpool.com Ultrasonic Testing of Wrought Plate including
Hallam Way, Blackpool
E: ian.judge@talonndt.com Thickness Gauging (ISO 20807)
Lancashire
T: +44 (0) 1253 696400
FY4 5NZ
W: www.talonblackpool.com
21
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
PART 3
Historically, a number of Approved Training Organisations have offered level 3 training courses. By definition, these courses must be tailored to meet the
needs of individual candidates. Please refer to the Foreword on page 2.
Note: The following organisations have been recognised by BINDT as providers of individually designed level 3 training packages.
Training Organisation Contact
IMechE Argyll Ruane Contact : David Griffin
4 Europa View T: + 44 7778 157459
Sheffield Business Park T: + 44 114 399 5720
Sheffield E: David.Griffin@IMECHE.org
S9 1XH W: http://argyllruane.imeche.org
Contact: Jessica Flint
Training Coordinator: Gary Jenkins
International School of Aerospace NDT
T: +44 (0) 1603 260148
Unit 2, Beech Avenue
E: Jessica.flint@isandt.co.uk
Taverham
E: Gary.Jenkins@isandt.co.uk
Norwich
E: wayne.middleton@isandt.co.uk
NR8 6HW
E: info@isandt.co.uk
W: www.isandt.co.uk
Lavender International NDT Contact: Beverley Scott
Unit 7, Penistone Station T: +44 (0) 1226 765 769
Sheffield E: enquiries@lavender‐ndt.com
S36 6HP W: www.lavender‐ndt.com
22
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Training Organisation Contact
Contact: Michelle Clapham/John Coldman
South West School of NDT Training Coordinator: Tony Wellington
Merton House E: jon.coldman@minton.co.uk
Croescadarn Close E: training@minton.co.uk
Pentwyn E: tony.wellington@minton.co.uk
Cardiff, CF23 8HF T: +44 (0) 292 054 0000
W: www.swsndt.co.uk
TWI Aberdeen Contact: Andrew Jeffreys
Unit 20 Spires Business Centre Training Coordinator: Michal Skerik
Mugiemoss Road T: +44 (0) 1224 691 222
Bucksburn E: andrew.jeffreys@twi.co.uk
Aberdeen E: michal.skerik@twi.co.uk
AB21 9BG W: www.twitraining.com
TWI – Cambridge Contact: Michael Skerik
Granta Park T: +44 (0) 1223 899 500
Abington E: michal.skerik@twi.co.uk
Cambridge E: trainexam@twitraining.com
CB21 6AL W: www.twitraining.com
TWI Technology and Training Centre (North East)
Ferrous Road Contact: Michal Skerik
Riverside Park T: +44 (0) 1642 216320
Middlesbrough E: michal.skerik@twi.co.uk
TS2 1DJ W: www.twitraining.com
SGS (Shanghai) NDT Training & Examination Centre
SGS‐CSTC Standards Technical Services Co Ltd, Contact: Sophia Bian
2F, Building 8, No 69, 1159 East Kangqiao Road M: +44 7825 099176
Pudong District E: Sophia.bian@sgs.com
Shanghai 201319 W: www.sgs.com
P.R. China
ATTAR Contact: Paul Grosser
Unit 1, 64 Bridge Road T: +61 3 9574 6144
Keysborough, Victoria E: paulgrosser@attar.com.au
3173 Australia W: www.attar.com.au
23
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Training Organisation Contact
Serco Limited
Room 130 Stephenson House PCN Coordinator: Gerie Connors
RTC Business Park Telephone: 0330 109 8855
London Road Email: Geraldine.Connors@serco.com
Derby
DE24 8UP
Contact: Babu Sajeesh Kumar
WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC Training Coordinator: Mr. R. Raghunathan
PO BOX 393179, Unit 2F‐A‐02, T: +971 4554 6284
Empire Heights, Tower A, Business Bay, T: +971 5624 28507
Dubai, UAE E: wensdubai@gmail.com
E: admin@wensdubai.com
Contact: Sze Thiam Siong
Training Coordinator: See Wah Kiaw
SETSCO Services PTE Ltd
T: +65 6566 7777
18 Teban Gardens Crescent
E: nahhs@setsco.com
Singapore 608925 E: marketing@setsco.com
E: seewk@setsco.com
Contact: Linda Dulay
NDT Consultants Ltd Training Coordinator: Mike Reilly
Middlemarch House, Siskin Drive T: +44 (0) 24 7651 1151
Coventry E: Linda@ndt‐consultants.co.uk
CV3 4FJ E: Mike@ndt‐consultants.co.uk
E: sales@ndt‐consultants.co.uk
African NDT Centre (Pty) Ltd Contact: Debbie Myburgh
520 Van Ryneveld Avenue Training Coordinator: Evashan Maistry‐Thavar
Pierre van Ryneveld Park T: +27 (0) 12 665 3248
Centurion E: debbie.myburgh@andtc.com
0045 E: evashan.thavar@andtc.com
W: www.andtc.com
LAVENDER INTERNATIONAL NDT Contact: Michelle Chapman
University Business Park, Suite G. Training coordinator: Ian Griffin
15200 Middlebrook Dr. T: +44 (0) 1226 765 769
E: michelle@lavender‐ndt.com
Houston Texas
E: ian@lavender‐ndt.com
77058 E: david@lavender‐ndt.com
United States W: www.lavender‐ndt.com
24
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only ISSUE NO 186
DATE 12th June 2020
REF APP‐LIST‐NDT
Training Organisation Contact
Contact: Samantha Wright
AEROSPACE INSPECTION TRAINING LTD
Training Coordinator: Joanne Nair
Units 9 & 10 Takeley Business Centre T: +44 (0) 1279 870276
Dunmow Road, Takeley E: samantha.wright@aerospacendt.co.uk
Bishops Stortford, CM22 6SJ E: joanne.nair@aerospacendt.co.uk
E: Jayn.lone@aerospacendt.co.uk
W: www.aerospacendt.co.uk
TAIKOO (Xiamen) AIRCRAFT ENGINEERING CO LTD
Contact: Lei Yue
Guandian Second Road, Huli District
T: (86) 592 5737 290
Xiamen 361006
E: leiyue@haeco.com
Xiamen United Technology Center Ltd
Contact: Raymond Ho
Wu Han Building
T: (86) 592‐5083 118
261 Jai He Lu, Building 1
E: raymond@yahoo.com.hk
Room 9C
Xiamen P.R.C
25