Professional Documents
Culture Documents
COMPANY PROFILE
PO BOX: 3646, Al Khobar 31952, Kingdom of Saudi Arabia,Tel: 013 899 9728 Fax: 013 897 8078
Email: info@gqcco.com
Registered Office: Dhahran/ Jubail Highway,Al Faihaa Area , Jordan St. Dammam, Al Khobar-
31952, Kingdom of Saudi Arabia
2) QHSE Policies
4) International standards
6) Organization Chart
7) Contact list
9) list of Equipment
11) Certifications
GQCCO is committed to provide highest quality of services in specialized Inspection and NDT
services through worldwide. We aim to offer a comprehensive end-to-end in house package of design,
engineering, resourcing and executing to today’s owner, operator or engineering contractor.
Vision
GQCCO vision is to be a leader in our field, i.e., Inspection and Testing Services in Kingdom.
Values
NDT Services
Field of
Lifting inspection
Services Third Party Inspection
Training Services
Railways
Visual Inspection
GQCCO HAS THE CAPABILITY TO INSPECT ALL FIXED AND LOOSE LIFTING GEAR
TYPES INCLUDING:
GQCCO Inspection Service is a certified lifting gear inspection company with many years of
experience in the field.
Strictly working to local and international regulations and inspection standards, GQCCO provides
the highest quality inspection and verification service for safe and uninterrupted lifting
operations.www.gqcco.com
Condensers
Feed water heaters
Heat exchangers
Air conditioners
Tube Inspection with an Internal Rotating Inspection System (IRIS) for Ferrous and Nonferrous
Materials
Boilers
Feed water heaters
Carbon steel heat exchangers
Remote field testing (RFT) is being used to successfully inspect ferromagnetic tubing such as carbon steel or ferritic stainless
steel. This technology offers good sensitivity when detecting and measuring volumetric defects resulting from erosion,
corrosion, wear, and baffle cuts.
Magnetic flux leakage (MFL) is a fast inspection technique, suitable for measuring wall loss and detecting sharp defects such
as pitting, grooving, and circumferential cracks. MFL is effective for aluminum-finned carbon steel tubes, because the
magnetic field is almost completely unaffected by the presence of such fins.
Considerations:
Surface preparation is required to support the collection of quality data »
100 mm of radial and axial clearance is required for scanner fitment (small bore scanner available for restricted
access scanning)
6. General
a. The above scope of services offered serves as illustration only,
however, other services, methods or equipment can be provided
as required, these include inspection systems, pressure testing, x-
ray crawler units, metallurgical constancy, real time imaging, fiber
optics, acoustic emission, MFL Tank floor Inspection, Tube
Inspection, Positive Material Identification etc.,
GQCCO Company Profile – Rev. 23 Dt. 29th July 2020 Page 18 of 38
4. International standards
Our Inspection is based on International Standards and Saudi Aramco applicable GL’s.
GQCCO is Registered & Approved 3rd Party Inspection Service Provider for;
SADARA Registered
S
Name Position E-mail address
N
1 Mr.Faisal Al-Harbi President Faisal.alharbi@gqcco.com
2 Mr. Rami al-janaideh QA/QC (MR) Info@gqcco.com
3 Mr. Senthil Kumar Operations Manager Operations@gqcco.com
LEI INSPECTORS
9 Lifting Equipment Inspectors TOTAL - 06
Radiographic Projector - 660 B & Sigma 880 with Accessories & Safety
21
5 Equipment.
13 CD of Training Materials for RT, UT, MT, PT, ET & RTFI 6 Sets
19 Copying Machine 6
20 Library of Major Codes & Standards, Welding Related Reference books Various
1-4 MISA
1-8Saudi Aramco
Project name : NDT Level III & API Training Services Direct Contract
Location within country : Khurais Project – Saudi Aramco – Dammam Fab shop
Location within country : Riyadh Refinery – 50” Flare Line Replacement Project
1-19SINOPECEngineering Group
1-20Gulf Riyadh
1-34 SAQCO
1-37 SISCO
1-38 ANCC