Professional Documents
Culture Documents
BITUMEN COMPOUND
1. PRODUCT AND COMPANY INFORMATION
i) Product Information:-
3. HAZARDS INFORMATION
4. FIRST-AID MEASURES
i) In case of ingestion: Wash mouth with water. Do not induce vomiting. Get prompt medical attention.
ii) In case of skin contact: Wash with water when wet and with white spirit or kerosene followed by water and
soap when dry.
iii) In case of eyes contact: Flush eyes with plenty of water for at least 15 minutes and seek medical attention.
iv) In case of inhalation: Inhalation is unlikely to occur. Immediately remove the affected person form exposure.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
BITUMEN COMPOUND
5. FIRE FIGHTING MEASURES
i) Suitable extinguishing media: Dry chemical powder, carbon dioxide, alcohol-resistant foam, and or earth.
ii) Unsuitable extinguishing media: Unknown.
iii) Hazardous decomposition: Carbon monoxide, carbon dioxide and other harmful products.
i) Personal precautions: Prohibit smoking, eating or drinking at the area where it is used. Use water and cleanser
for cleaning purposes. Keep away from sources of heat, naked flames and sparks.
Maintain efficient ventilation.
ii) Personal protection: Avoid contact with the skin, eyes and clothing. Use protective gears like mask, goggles
and gloves as a good industrial practice.
iii) Environmental protection: Dried film does not dissolve in water and is not considered hazardous. The solvent
content is highly volatile and highly flammable. A vacumn hood should be used to suck
away the solvent vapour.
i) Form: Paste
Page 2 of 4
MATERIAL SAFETY DATA SHEET
BITUMEN COMPOUND
ii) Specify gravity: 0.685 g/ml
iii) Colour: Black
iv) Viscosity: N/A
v) Odour: Smell of organic solvent. Almost like gasoline.
vi) Solubility in water: None
vii) Initial boiling point: 420C
viii) Flash point: -30 deg Celsius
ix) Ignition temperature: N/A
Note:- Above information is not used for preparing specification of the material.
i) Chemical stability: Solvents contained are highly volatile. Shelf life is 6 months. Viscosity will
increase with storage time. Colour will change to dark brown when stored long.
ii) Incompatibility (material to avoid) Avoid water, oil, dust on surfaces you want to bond to.
iii) Conditions to be avoid: Direct exposure to sunlight and heat. The cap of the container should be
closed at all times to prevent it from drying up.
iv) Dangerous reaction: N/A
v) Hazardous products of decomposition: Incomplete burning can produce carbon monoxide, carbon dioxide and other
harmful products.
i) Basics for assessment: Practical experience and chemical composition of the solvents in the sealant.
ii) Eye irritation: Possible
iii) Skin irritation: Single and short exposures poses no threat. Prolonged exposure may cause skin
irritation on sensitive individuals.
iv) Respiratory irritation: Possible
v) Other information: The dried film is basically very safe, inert, non-reactive and non-corrosive. Sensitive skin
may be irritated if direct exposure is prolonged.
vi) Toxicity: Non toxic when dry.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
BITUMEN COMPOUND
The information given above is true and is based on our own study and research work and experience. EASY-FIX Chemicals
Industry does not provide warranty or guarantee for the products made at defferent conditions for which are beyond our control.
All seperate trial cases should be studied and tested to obtain own parameter before any order and delivery.
Page 4 of 4