Professional Documents
Culture Documents
PCB DIAGRAM
6 9
5
8
4 3 2 1
1 RY1 Main Relay Receives AC 220V power and operates the PBA.
2 RY3 Washing Heater Relay Relay to drive the washing heater power supply.
3 CN9 Power Supply Port Receives AC 220V power and operates the PBA.
4 CN8 Water Level, and Temperature Sensor Connection Port Detects laundry water supply/draining and the operation of each of the heaters.
5 CN5 Motor Protector Connection Port Protects the washing motor from surge currents.
6 CN4 Silver Nano Control Part Connection Port Connected to the Silver Nano Control PBA and controls the operations.
7 CN6 Each Driver Part Connection Port Handles door lock, cold/hot water supply, and draining motor operations.
8 CN3 Motor Tacho Connection Port Controls the speed by monitoring the tachometer of the washing motor.
9 CN2 Motor Power Supply Port Detects if the washing motor is working properly or not.
76 _ PCB Diagram
6-2. CIRCUIT DIAGRAMS OF MAIN PARTS (BEST)
► CN2
► CN4 1. Motor drive relay is connected.
► CN3 1. Controls Silver Nano forward direction current. 2. NC
1. Motor Tachometer is connected. 2. Controls Silver Nano reverse direction current. 3. Motor drive power is connected.
2. NC 3. Controls Silver Nano current. 4. High Speed relay is connected. ► CN5
3. NC 4. Turns On/Off Silver Nano operation. 5. High Speed relay is connected. 1. Motor Protector is connected.
4. Motor Tachometer is connected. 5. GND 6. Motor drive relay is connected. 2. Motor Protector is connected.
PCB Diagram _ 77
6-3. SUB PCB (BEST)
2
3
1 BUZZER1 Buzzer Circuit Generates sound when the menu key and encoder-key are operated or when the menu is closed.
2 DSP1 Time Display Displays the remaining time for the selected cycle.
3 CN1 Program Writing Attache the connector for writing the program when an upgrade or change of the program is required..
78 _ PCB Diagram
6-4. DETAILED DESCRIPTIONS OF CONTACT TERMINALS (SUB PCB-BEST)
► CN1
1. Program for writing ISP_TEST is connected.
2. GND
3. 5V
4. Program for writing RESET is connected.
5. Program for writing TX is connected.
6. Program for writing RX is connected.
PCB Diagram _ 79
6-5. MAIN PCB (BETTER)
6 9
5
7
4 3 2 1
1 RY1 Main Relay Receives AC 220V power and operates the PBA.
2 RY3 Washing Heater Relay Relay to drive the washing heater power supply.
3 CN9 Power Supply Port Receives AC 220V power and operates the PBA.
4 CN8 Water Level, and Temperature Sensor Connection Port Detects laundry water supply/draining and the operation of each of the heaters.
5 CN5 Motor Protector Connection Port Protects the washing motor from surge currents.
6 CN4 Silver Nano Control Part Connection Port Connected to the Silver Nano Control PBA and controls the operations.
7 CN6 Each Driver Part Connection Port Handles door lock, cold/hot water supply, and draining motor operations.
8 CN3 Motor Tacho Connection Port Controls the speed by monitoring the tachometer of the washing motor.
9 CN2 Motor Power Supply Port Detects if the washing motor is working properly or not.
80 _ PCB Diagram
6-6. CIRCUIT DIAGRAMS OF MAIN PARTS (BETTER)
► CN2
► CN4 1. Motor drive relay is connected.
► CN3 1. Controls Silver Nano forward direction current. 2. NC
1. Motor Tachometer is connected. 2. Controls Silver Nano reverse direction current. 3. Motor drive power is connected.
2. NC 3. Controls Silver Nano current. 4. High Speed relay is connected. ► CN5
3. NC 4. Turns On/Off Silver Nano operation. 5. High Speed relay is connected. 1. Motor Protector is connected.
4. Motor Tachometer is connected. 5. GND 6. Motor drive relay is connected. 2. Motor Protector is connected.
PCB Diagram _ 81
6-7. SUB PCB (BETTER)
2
1
1 BUZZER1 Buzzer Circuit Generates sound when the menu key and encoder-key are operated or when the menu is closed.
2 DSP1 Time Display Displays the remaining time for the selected cycle.
3 CN1 Program Writing Attach the connector for writing the program when an upgrade or change of the program is required.
82 _ PCB Diagram
6-8. DETAILED DESCRIPTIONS OF CONTACT TERMINALS (SUB PCB-BETTER)
► CN1
1. Program wWriting ISP_TEST is connected.
2. GND
3. 5V
4. Program wWriting RESET is connected.
5. Program Writing writing TX is connected.
6. Program Writing writing RX is connected.
PCB Diagram _ 83