The document contains 10 multiple choice questions related to control systems:
1) Question 1 asks about the steady state output of a system with a given transfer function subjected to a unit step input.
2) Question 2 asks about what the unit impulse response of a system gives in the Laplace domain.
3) Question 3 gives a transfer function for a speed control system and asks for the output given a 1 volt input.
4) Questions 4-10 ask about various control system concepts like damping ratio, settling time, differential equations, steady state error, and stability criteria.
The document contains 10 multiple choice questions related to control systems:
1) Question 1 asks about the steady state output of a system with a given transfer function subjected to a unit step input.
2) Question 2 asks about what the unit impulse response of a system gives in the Laplace domain.
3) Question 3 gives a transfer function for a speed control system and asks for the output given a 1 volt input.
4) Questions 4-10 ask about various control system concepts like damping ratio, settling time, differential equations, steady state error, and stability criteria.
The document contains 10 multiple choice questions related to control systems:
1) Question 1 asks about the steady state output of a system with a given transfer function subjected to a unit step input.
2) Question 2 asks about what the unit impulse response of a system gives in the Laplace domain.
3) Question 3 gives a transfer function for a speed control system and asks for the output given a 1 volt input.
4) Questions 4-10 ask about various control system concepts like damping ratio, settling time, differential equations, steady state error, and stability criteria.
1. A steady state having transfer function G(s)=1/2(s+0.
5) is subjected to unit step input the
steady value of the output is a) 1 b) 2 c) 1/2 d) 1/10 2. Unit impulse response of a system in Laplace transform gives a) transfer function b) system gain c) unit step d) unit ramp function function 3. w ( s) 100 A speed control system is expressed by the transfer function = , for 1 volt V ( s) 2+10 s input the output will be a) 100 rad/sec b) 10 rad/sec c) 10/12 rad/sec d) 50 rad/sec 4. The Laplace transform of e-2tsin 2t is a) 4/(s+2)2+4 b) 4/s2+4 c) 2/s2+4s+8 d) 2/s2+4 5. C (s ) 36 For the system = 2 the damping factor ζ and damped frequency ω will be R ( s ) s + 4.8 s +36 a) ζ=0.6, ω=5 b) ζ=0.4, ω=6 c) ζ=0.5, ω=3 d) ζ=0.3, ω=5 6. For a second order system given that ω=4, ζ=0.8 the settling time and peak time will be a) 1.3s, 1.25s b) 1.25s, 1.3s c) 1.3s, 2.5s d) 2.5s, 3.1s 2 7. d x dx The solution of the differential equation 2 + 2 +2 x=1is dt dt a) Critically Damped b) Under Damped c) Over Damped d) Steady 8. The time needed response to reach 50% of the final value is called a) rise time b) peak time c) settling time d) delay time 9. The Routh-Hurwitz criterion gives a) relative stability b) absolute stability c) Marginal stability d) phase margin 10 The steady state error for a type 2 system subjected to a unit ramp input is . a) 1 b) infinity c) 1 d) 0 K