Professional Documents
Culture Documents
INSPECTION FORM
MULTI-STEP CAPACITOR BANK, 600V ID:
Cleanliness (As Found): Good Acceptable Poor Support Insulators: Good Acceptable Poor
Visual Inspection / Cleaning
Electro/Mechanical
Connections: Good Acceptable Poor N/A Good Acceptable Poor
Interlock:
Ground Connection: Good Acceptable Poor Contactor Condition: Good Acceptable Poor
Door Mechanical: Good Acceptable Poor Contact Alignment: Good Acceptable Poor
Comments:
Source Cables:
Note: Approval of City’s Representative is required,
Test Preparation: Disconnected
prior to leaving cables connected during the test.
Connected with Source Isolated
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Comments:
3
Capacitance
Comments:
Comments:
Resistance (µΩ)
Contactor Test Summary
A B C
Test Passed
Incoming Test Inconclusive
Further Investigation Required.
Test Failed
Step 1
Contactor Pole Measurements
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Comments:
Performed By
Checked By
Note: The person performing the check is responsible for ensuring that the data is transcribed from the handwritten form correctly, and that
the analysis results are correct.
3Ø, 3W N/A, or
Busway Data
Operating
Rated Voltage: V V Withstand Rating: kA Date Installed:
Voltage:
Indoors
Length: m Measured From Drawings Previous Data Installation:
Outdoors
Ventilation
N/A Good Acceptable Poor Ventilation Openings Cleaned: Yes N/A
Openings :
The following inspection items are only required for busway routed through outdoors or through wet / cold environments.
Condition of Gaskets: Good Acceptable Poor Joint Shield Installation: Good Acceptable Poor
Comments:
Comments:
Phase
Test Units
Total Impedance
A B C N
Resistance
Inductance
Comments:
Performed By
Checked By