Professional Documents
Culture Documents
Experiment#16 To Perform Counterboring On Drilling Machine Objective To Perform Countersinking On A Plate
Experiment#16 To Perform Counterboring On Drilling Machine Objective To Perform Countersinking On A Plate
Theory
counterboring is used to produce a hole that enlarges another coaxial
hole, or the tool used to create that feature. A counterbore hole is
typically used when a fastener, such as a socket head cap screw, is
required to sit flush with or below the level of a workpiece's surface.
Whereas a counterbore is a flat-bottomed enlargement of a smaller
coaxial hole, a countersink is a conical enlargement of such.
A spotface often takes the form of a very shallow counterbore.
As mentioned above, the cutters that produce counterbores are often
also called counterbores; sometimes, to avoid ambiguity, the
term counterbore cutter is used instead.
Apparatus;
: Drilling
machine, Drill bit, scriber, steel rule, dot
punch, Ball peen hammer, Anvil, Drilling machine vice, Drill chuck
Procedure;
prepare the workpiece
draw dimensions to workpiece by using scriber and
steel rule
using a dot punch.punch the point
select the correct size of drill bit for counterboring
fix drill chuck to drilling machine
workpiece is fixed rigidly on drilling machine
switch on drilling machine and drill the punch carefully
Conclusion;
hence the required counterboring is produce in
the workpiece.