Professional Documents
Culture Documents
Manual
UTB-75-D
Unitized Hook Block
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 2
REVISION HISTORY
CHANGE DESCRIPTION
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 3
TABLE OF CONTENTS
1 LUBRICATION.................................................................................................................. 5
2 OPERATIONAL MAINTENANCE ..................................................................................... 6
3 OPERATING PRACTICE .................................................................................................. 6
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 4
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 5
1 LUBRICATION
Grease Sheave Bearings Weekly when in use at “B”. (Note 1 Fitting for each Sheave
Bearing. Do Not Over-grease).
Recommended Lubricants
Sheave Bearings, Brush Grease: Use an Extreme Pressure Multipurpose Grease of No. 1
or No. 2 consistency.
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 6
2 OPERATIONAL MAINTENANCE
1. Clean and Inspect for Wear and Cracks on Each Link Ear every month. Contact
National Oilwell Varco for Maximum Wear Allowance.
2. Remove Hook Stem Pin and check for Wear and Cracks in Pin, Hook and Hook
Stem every 6 months. Brush Coat Pin with Grease upon reassembly.
3. Check entire area of Block Assembly for Wear, Cracks or Metal Deformation every
month.
3 OPERATING PRACTICE
At the first sign of Excessive Wear or Cracks on any portion of Hook or Body Assembly,
use of Block must be discontinued until approved repair or replacement has been made.
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 7
DWG. 4-479-S7
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 8
Parts List
UTB-75-2-24 &
UTB-75-3-24
4-479-S7-01
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 9
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 10
4-479-S7-02
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 11
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 12
4-479-S7-03
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 13
47 2 1-479-27 Spacer --
48 4 478-13-07 Hinge Pipe (Dwg 1-478-13) --
49 1 2-479-43 Spacer Plate --
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 14
4-479-S7-04
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 15
47 2 1-479-27 Spacer --
48 4 478-13-07 Hinge Pipe (Dwg. 1-478-13) --
49 1 2-479-43 Spacer Plate --
www.natoil.com
Document number UTB-75-D-MAN-001
Revision 03
Page 16
DWG. 2-479-06
www.natoil.com