Professional Documents
Culture Documents
Electrical Electrical Machines Homework 2: Notes: HW
Electrical Electrical Machines Homework 2: Notes: HW
Question Grade
Question Points ILO’s ILO’s %
Q1
Q2
Student Grade
HW Notes:
1- Read each problem carefully before attempting to solve it.
2- Write all work on this homework paper.
Good Luck
Q1: (ILOs 4 ) C Points: 10
A separately excited DC generator is rated at Pout = 10kW , VT= 250V and a speed of
n=1000rpm. The armature resistance is RA= 0.2 Ω . The filed coil has RF=100 ohm and R adj
connected in series and supplied from a 200 V supply.. The mechanical and core losses are 500
watt(stray losses are neglected). The magnetization curve of the generator , at n=1000 rpm , is given
in the following table :
(a)- The no load terminal voltage at 800 rpm if Radj is set to 100 ohm?
b) the full load terminal voltage at 800 rpm if Radj is set to 100 ohm?
d) what should be the value of Radj to make the full load terminal voltage equals 225 volt at 900 rpm.
e) what should be the value of the speed to make the full load terminal voltage equals 225 at Radj=150 ohm
Good Luck