Professional Documents
Culture Documents
Water Pollutant Monitoring Through Remote Sensing
Water Pollutant Monitoring Through Remote Sensing
Project Proposal
Supervisor
Eng. Abdul Hadi Muzamil
Submitted by
[11-02-2020]
Introduction
The project is designed to develop an automatic irrigation system which
switches the pump motor ON/OFF on sensing the moisture content of the soil.
The project uses ARDUINO UNO microcontroller.
Which is programmed to receive the input signal from the moisture sensor.
Once the controller receives this signal, it generates an output that drives a
relay for operating the water pump.
Milestones
1. Problem Understanding
2. System Understanding
3. Hardware design
4. Interfacing Hardware
5. Application design
6. Testing and analysis
7. Maintenance
Block Diagram