Professional Documents
Culture Documents
You will notice that they are extremely simple - only three ingrediants each time; the Hormone powder,
Benzyl-Benzoate and Benzyl Alcohol. It is the ratio of these three which is important.
Some Hormone Powder dissolve more easily than others and therefore less Benzyl Benzoate is required.
The fact that varying amount of the solvent are required for the Hormone Powders is why having this
page as a resource is so vital.
Benzyl-Alcohol is just a form of alcohol. Its use in Steroids is to preserve the suspension for months,
even years, without any reduction in sterility. Alcohol is an anti-bacterial disinfectant and is used as such
in many industries. As aforementioned Benzyl-Alcohol ensures the Steroid maintains its sterility when
used in the right concentration, however, if too much is used the Steroid will be painful to inject and will
cause post injection soreness.
25g Powder is used, we want only 2.5g to be used, 25/2.5 = 10. Therefore we want 10x less than the
amounts in the above recipe:--
The above is the recipe you need for 10ml @ 250mg/ml for Test E.
QualityRaws reccomend all new recipes to be trialled with a 10ml batch. Use the above method to create
a suitable recipe.
Offical list
These should be followed exactly, use electronic scales that are able to weight to 0.01g to ensure
accuracy. You will see the abreiviations BA and BB being used in the following recipes. Benzyl Benzoate
- BB / Benzyl Alcohol - BA.
Testosterone Enanthate
250mg/ml - 100ml
25 gram Testosterone Ethanate powder (18.75ml)
2ml BA (2%)
10ml BB (10%)
69.25ml Oil
NPP
200mg /mL - 20ml
NPP powder - 4 Grams
100% EO - 12.6mL
2%BA - 0.4mL
20%BB - 4mL
Testosterone Propionate
100mg/ml - 100ml
10 gram Testosterone Propionate powder (7.5ml)
2ml BA (2%)
20ml BB (20%)
70.5ml Oil
Tren Acetate
100mg/ml - 100ml
10 gram Trenbolone Acetate powder (7.5ml)
2ml BA (2%)
20ml BB (20%)
70.5ml Oil
Masteron
100mg/ml - 250ml
25 gram masteron Propionate (20ml)
5ml BA (2%)
50ml BB (20%)
175ml Oil
Equipoise
100mg/ml - 100ml
10g Boldenone Acetate powder (7.5ml)
18% BB 18ml
2% BA 2ml
72.5ml Oil
Methenolone enanthate
250ml for 100mg/ml
25 grams Methenolone enanthate
176.25 ml Grapeseed Oil
5ml benzyl alcohol = 2%
50ml benzyl benzoate = 20%
Deca-Durabolin
250mg/ml - 250ml
Durabolin powder : 50g (46.8ml)
Grapeseed oil: 124.4ml
BA 3.75ml (3%)
BB 75ml (15%)
The above recipes will produce high quality, highly stable and reliable Steroids every-time.
LIQUID ORAL RECIPES - Please use the 'Steroid Calculator' page to learn how to make
tablets/capsules
Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol
Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol
Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol
Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml's of PEG 600
10.5 ml's 190 Proof Grain Alcohol
Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.
Femara:
Highest concentration made - 5mg/ml
Per 1 gram of letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol
Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml's of PEG 600
39.2 ml's of 190 Proof Grain Alcohol
Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol
Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml's of PEG 300
31.2 ml's of 190 Proof Grain Alcohol
---------------------------------------------------------------------------------
Solutions requiring PEG and 190 Proof Alcohol
Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from
heat.
Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and
powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.
Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by
drop but don't just dump it in. Pour it in slowly.
2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is
needed follow the instructions for heating powders that use PEG
Procedures:
-Combine stanozolol powder, BA, BB, PS80 and heat until clear while swirling.
-Filter slowly with a Sterile 0.22um Syringe Filter directly into a Sterile Vial.
- Filter the distilled water with a new Sterile 0.22um Syringe filter into the vial - Keep swirling the vial as
you filter in the distilled water.
-Vigorously shake the Winstrol in the vial for a few minutes
NOTE: your final Winny solution will look foamy or airy. After you shake the hell out of it, let it sit
untouched for 3 days. You will see it settle out with the water on top as usual. This will be very micronized
and settling out will take days, so do not be concerned.
This will produce the standard PIP of Winstrol found in Underground Labs, it is not totally painfree - but
not painful.
Blends
Testosterone 600mg/mL Blend @ 20mL
Testosterone Enathate powder - 12g (displaces approx. 10.2ml ~ 51% total volume)
3%BA – 0.6mL
10%BB – 2mL
25%EO – 5mL
11% Oil – 2.2mL
10ml conversion
10ml conversion