You are on page 1of 11

PCI MOD3,6,30 ANALYSIS GEOGRAPHY STATISTICS

AND AUTO OPTIMIZATION


HOW TO FIND MOD3,6,30
COLLISION
The algorithm can find the MOD(3),MOD(6) and MOD(30) collision for
each cell which has cross coverage area with another cell, and this
algorithm will implement traversing in every single cell one by one for
whole network.

1 2 3

Find MOD(3),MOD(6) and


MOD(30) collision cells by Output analysis report and Generate Optimization
particulat algorithm based optimization solution Report
customer confirmed RSRP
INPUT DATA
SITE INFO: Interference Level
1. Longitude, Latitude
2. Antenna Height
3. Antenna Down tilt
4. Site Output Power
Parameter for Radio Link Loss
Formula
1. F: Frequency
2. Hb: Antenna Height
3. CH: Environment factor
OPTIMIZATION PROCEDURE A
Input RSRP Level:
Such as -85dBm
Site Info
Logitude, Latitude
Mod(3) B
Height, Down Tilt Cross Coverage Area
Radio Link Loss
Tx_Power Lu=69.55+ Output Cell
26.16*log(f)- Coverage Radius
13.82*log(Hb)-
CH+[44.9-6.55
*log(Hb)]*log
Parameter for (d)
Radio Link Loss

f: Frequency

Hb : Site Height

CH : Environment
OUTPUT DATA
1. Cell MOD(3),MOD(6) and MOD(30) analysis report;
2. MOD(3),MOD(6) and MOD(30) thematic map;
3. Candidate PCI Value List;
4. Optimization Report

The following slides will show you more information regarding these
topics.
GENERATE PCI ANALYSIS REPORT
CELL NAME PCI MOD(3) MOD(6) MOD(30) Cell Name Cross Coverage Area PCI Distance(M) MOD(3) MOD(6) MOD(30) MOD(3) MOD(6) MOD(30)
City_Center_1 122 2 2 2 ShopingMall_1 50 3 520 0 3 3N N N
City_Center_1 122 2 2 2 Pharmacy_2 33 78 480 0 0 18 N N N
City_Center_1 122 2 2 2 School_2 35 89 610 2 5 29 Y N N
City_Center_2 123 0 3 3 Hotel_3 76 264 480 0 0 24 Y N N
City_Center_2 123 0 3 3 Kindergarten_2 34 67 560 1 1 7N N N
City_Center_2 123 0 3 3 Hospital_2 23 100 550 1 4 10 N N N
City_Center_2 123 0 3 3 Park_1 44 111 780 0 3 21 Y Y N
City_Center_3 124 1 4 4 Police_2 53 222 660 0 0 12 N N N
City_Center_3 124 1 4 4 Caffee_1 21 333 770 0 3 3N N N
City_Center_3 124 1 4 4 Palace_3 18 454 670 1 4 4Y Y Y

This report will show you a clear picture regarding the MOD(3),
MOD(6) and MOD(30) collision base on the RSRP which user
definition.
GENERATE PCI MOD THEMATIC
MAP
DELIVERY OPT REPORT FREQUENCY 38400 PCI MOD(3)
250 50.00%
45.00%
200 40.00%
Number of Collision Before After 35.00%
cells optimization optimization 150
FREQUENCY 38400 PCI MOD(30) 30.00%
25.00%
MOD(3) 100 0 25 100 20.00%5.00%
MOD(6) 80 10
15.00%4.50%
50 10.00%
20 4.00%
MID(30) 60 5 5.00%
0 0.00% 3.50%
15 MOD-0 MOD-1 MOD-2 3.00%

Before After Num_Cell Percent


2.50%
Sum Collision Area
Optimization Optimization 10 2.00%
1.50%
MOD(3) 16789 560 5
FREQUENCY 38400 PCI MOD(6) 1.00%
0.50%
MOD(6) 80 10 0
120 25.00%
0.00%

MOD-0
MOD-1
MOD-2
MOD-3
MOD-4
MOD-5
MOD-6
MOD-7
MOD-8
MOD-9
MOD-10
MOD-11
MOD-12
MOD-13
MOD-14
MOD-15
MOD-16
MOD-17
MOD-18
MOD-19
MOD-20
MOD-21
MOD-22
MOD-23
MOD-24
MOD-25
MOD-26
MOD-27
MOD-28
MOD-29
100
MID(30) 60 5 20.00%
80
15.00%
60 Num_Cell Percent
10.00%
Netwrork 优化前 优化后 提高 40

20 5.00%
Access Success Rate 98% 99% 1.02%
0 0.00%
Downlink
1432 1456 1.68% MOD-0 MOD-1 MOD-2 MOD-3 MOD-4 MOD-5
Throughput(kbps)
Num_Cell Percent
ADVANCED FEATURE (1)
1. Single Cell PCI Tuning
Base on the output report, you will get the mod(3),mod(6) and
mod(30) collision cells list, and then system will provide you a
candidate value list support you to find the prober PCI.
The following table is an example which system will show you after
big data
PCI MOD(3) analysis.
MOD(6) MOD(30) Cross Area Cell Distance
Without
128 2 2 8 0
Collision Cell
179 2 5 29 8 1.3KM
234 0 0 24 12 0.9KM
156 0 0 6 14 0.8KM
ADVANCED FEATURE (2)
. Whole network PCI smart distribution
Once the RSRP confirmed, the system can fill the following table, and then
implement the algorithm to distribute PCI with different mod(3),mod(6) and
mod(30) values for the cells which get cross area from maximum to
minimum.
CELL NAME
City_Center_1
PCI
122
MOD(3)
2
MOD(6) MOD(30) Cell Name
2 2 ShopingMall_1
Cross Coverage Area
50
PCI
3
Distance(M) MOD(3) MOD(6)
520 0 3
MOD(30) MOD(3) MOD(6)
3N N
MOD(30)
N
City_Center_1 122 2 2 2 Pharmacy_2 33 78 480 0 0 18 N N N
City_Center_1 122 2 2 2 School_2 35 89 610 2 5 29 Y N N
City_Center_2 123 0 3 3 Hotel_3 76 264 480 0 0 24 Y N N
City_Center_2 123 0 3 3 Kindergarten_2 34 67 560 1 1 7N N N
City_Center_2 123 0 3 3 Hospital_2 23 100 550 1 4 10 N N N
City_Center_2 123 0 3 3 Park_1 44 111 780 0 3 21 Y Y N
City_Center_3 124 1 4 4 Police_2 53 222 660 0 0 12 N N N
City_Center_3 124 1 4 4 Caffee_1 21 333 770 0 3 3N N N
City_Center_3 124 1 4 4 Palace_3 18 454 670 1 4 4Y Y Y

Finally, we will make the network with minimum cross coverage area with
mod(3),mod(6) and mod(30) collision. And also base on the big data
analysis, we will put solution as well, to adjust some particular cell’s antenna
down tilt to make the mod collision as small as possible.
end

You might also like