Professional Documents
Culture Documents
• Twitter
• Facebook
• Delicious
• Digg
• Stumble
• Reddit
Author:
Shailesh
Tags:
In this increasing demand for water, industries having their own water reservoirs can’t afford to have
leakages especially when a large cost is involved in pumping it from the source. Water reservoirs are
prone to losses through evaporation and seepage. In this article, we will discuss about seepage and its
mitigation methods.
http://greencleanguide.com/2012/09/07/water-losses-through-seepage/ 6/26/2013
How to calculate water losses through seepage? | For the Changing Planet Page 5 of 7
Seepage is the slow escape of a liquid through porous material or small holes. In water reservoirs,
seepage is the main crucial issue behind water losses. Seepage generally occurs when the water
escapes vertically through the bottom of the pond and horizontal filtration of water through the dykes.
The water releases through such conditions is called seepage water. For effective water management
of reservoirs/dams/or small ponds, seepage calculation has become crucial. The stability of any water
reservoir is inversely proportional to the seepage i.e. if the seepage is high; stability is low and vice
versa.
There are many factors that affects amount of seepage water from the reservoir. The reasons behind
seepage are – wall of the reservoir, slope, soil type, bedrock type, dykes and volume and pressure of
water.
New reservoirs release more seepage water than old reservoirs. It is mainly due to the good soil
structure of the new reservoir. Soil particles bind together and form the soil structure. The
arrangement of soil pores between these particles influence the water movement and hence extremely
important in seepage assessment study. On the other hand, a reservoir that has been filled with water
for some time breaks down the soil structure. It occurs due the deposition of organic materials at the
bottom of the reservoir that seals the soil pores at the bottom of the reservoir and reduces
permeability.
Seepage calculation
There are two major types of seepage occurring in the artificial reservoirs. First is the horizontal
seepage and the second one is vertical seepage. The amount of vertical seepage is dependent on the
soil texture and soil structure at the pond bottom. For example, if the soil structure allows water to
penetrate it, there will be more seepage. As discussed in the previous section, composition of soil
particles forms the soil structure. If the soil is coarse or sandy, it is more permeable. The same case
occurs with the horizontal seepage. The water escapes through the walls of the reservoirs due to
higher permeability induced by the materials used to build the walls, water pressure and slope.
As discussed in previous section of this article, there are various factors affects the rate of seepage.
However, the material used in the construction and type of soil in the bed of the water reservoir,
mainly determines the rate of the seepage. The table below gives the rate of seepage losses in
millimeters per day from various soil types;
2 Sandy loam
13.00 – 76
3 Loam
8.00 – 20
4 Clayey loam
2.50 – 15
5 Loamy clay
0.25 – 5
6 Clay
1.25 – 10
Source: ftp://ftp.fao.org/fi/CDrom/FAO_Training/FAO_Training/General/x6705e/x6705e02.htm
http://greencleanguide.com/2012/09/07/water-losses-through-seepage/ 6/26/2013
How to calculate water losses through seepage? | For the Changing Planet Page 6 of 7
Seepage water (in m3/Day) = Seepage losses (in m/Day) X Surface area of the pond (in m2)
Example;
Surface area of the pond = let’s take 1,00,000 m2 (Width in meter X Length in meter)
Seepage losses = 14 mm (Soil type: Loam, by taking the average of 8 and 20)
For new reservoirs: During construction phase, use of impermeable material for the walls of the
reservoir helps in restricting seepage. Construction materials with high clay content i.e. minimum
55% restricts crack formation. This material includes organic material, top soil, decomposing material
and material with high mica content.
Note: This is only one of the methods to estimate the rate of seepage. There are many other methods
that can be employed to estimate the rate of seepage correctly.
Related posts:
The Indian Monsoon Black Carbon, Global State Bird of Delhi- House
Warming and India sparrow
http://greencleanguide.com/2012/09/07/water-losses-through-seepage/ 6/26/2013
How to calculate water losses through seepage? | For the Changing Planet Page 7 of 7
Leave a Reply
Name (required)
Website
Submit Comment
• About Us
• Team
• Green Videos
• Write for us!
• Advertisement
• Contact us
• About Us
• Team
• Green Videos
• Write for us!
• Advertisement
• Contact us
search:
search... Go
© Copyright 2013 — For the Changing Planet. All Rights Reserved Designed by
http://greencleanguide.com/2012/09/07/water-losses-through-seepage/ 6/26/2013