Professional Documents
Culture Documents
LIGHT EQUIPMENT.
Technical data may have country specific deviations.
TABLE OF CONTENTS
BT 60, BT 65
-Protective engine covering
-Paper air filter system with two
stages
Dimensions in mm
-Automatic oil level control
-Dual fuel filter system B
Vibration insulated steering bow BT 60 3
Self-cleaning air filter housing BT 65 3
Protective covering
Single point lifting device
Recoil starter
Technical Data
Plastic castor as loading aid
Infinitely variable frequency
Combination of engine stop/fuel
switch Weights
h-/ rpm meter Operating weight CE
3-2-1 Warranty Basic weight ..........
Fields of application:
Earthwork and asphalt construction.
Pipeline, trench and sewer line construction, back-
fills, foundations and repair work on asphalt.
Standard Equipment
Engine Protection System
-Protective engine covering
-Paper air filter system with two
stages
Dimensions in mm
-Automatic oil level control
-Dual fuel filter system B H L L1 W
Vibration insulated steering bow BT 60 350 1030 728 335 230
Self-cleaning air filter housing BT 65 350 1030 728 335 280
Protective covering
Single point lifting device B
Recoil starter H
Technical Data BOMAG BOMAG
Plastic castor as loading aid D
Infinitely variable frequency BT 60 BT 65 P
Combination of engine stop/fuel T
switch Weights F
h-/ rpm meter Operating weight CECE ........................................... kg 58 68
3-2-1 Warranty Basic weight ............................................................. kg 57 PRE 541 67
13 010 040219 Sa02
4 Dimensions
Optional Equipment
H L L1 W Transport device with puncture Working width (tamper plate) ................................... mm 230 280
proof wheels
Dimensions inDimensions
mm Dimensions
in mm in mm
matic
ntrol-Automatic
oil level control
oil level control
uel filter
-Dualsystem
fuel filter system B H L BL1 HW B L H
L1 LW L1 W
on
ering
insulated
Vibration
bow steeringinsulated
BT 60 bow steeringBT
bow
60
350 1030 BT 60 728 350 335 1030 230 350
728 1030 335 728 230 335 230
eaning
housing
Self-cleaning
air filter housing
air filter housing
BT 65 BT 65
350 1030 BT 65 728 350 335 1030 280 350
728 1030 335 728 280 335 280
tive covering
Protective covering
point
ce Single
lifting point
devicelifting device
starter
ng
Recoil starter
castor
aid
Plastic
as loading TECHNICAL DATA
Technical DataTechnical Technical
castor as aidloading aid
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
uency
ly variable
Infinitely
frequency
variable frequency BT 60 BT 60BT 65 BT 60 BT 65 BT 65
enation
stop/fuel
Combination
of engine stop/fuel
of engine stop/fuel
switch Weights Weights Weights
m meterh-/ rpm meter Operating weight Operating
CECE ...........................................
weight
Operating CECE weight kg 58
...........................................
CECE ...........................................
kg 68
58 kg 58 68 68
Warranty
3-2-1 Warranty Basic weight .............................................................
Basic weight Basic kg 57
.............................................................
weight .............................................................
kg 67
57 kg 57 67 67
5
Shipping dimensions in m3
BVT 65 0,262
BVT 65
-Protective engine covering
-Automatic oil level control
-Dual fuel filter system
Dimensions in mm
Vibration insulated steering bow
Self-cleaning air filter housing B
Protective covering BVT 65 3
Single point lifting device
Recoil starter
Plastic castor as loading aid
Infinitely variable frequency
Technical Data
Combination of engine stop/fuel
switch
3-2-1 Warranty
Weights
Optional Equipment Operating weight CE
Transport device with puncture Basic weight ..........
proof wheels
Tamper foot widths Dimensions
(160-330mm) Working width (tamp
Tamper foot extensions Driving Characteri
h-/ rpm meter Working speed max
Special painting Area coverage max
Tool kit
Service Kit Drive
TOUGH WARRANTY Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance SAE J
Fuel .......................
Drive system ..........
Fuel comsump. ave
Exciter system
Frequency .............
Impact force ...........
Capacities
Fuel .......................
Technical modifications reserve
Fields of application:
Earthwork and asphalt construction.
Pipeline, trench and sewer line construction, back-
fills, foundations and repair work on asphalt.
Standard Equipment
Engine Protection System
-Protective engine covering
-Automatic oil level control
-Dual fuel filter system
Dimensions in mm
Vibration insulated steering bow
Self-cleaning air filter housing B H L L1 W
Protective covering BVT 65 350 1030 728 335 280
Single point lifting device
Recoil starter
Plastic castor as loading aid B
Infinitely variable frequency H
Technical Data BOMAG D
Combination of engine stop/fuel
switch P
BVT 65 T
3-2-1 Warranty
F
Weights
Optional Equipment Operating weight CECE ........................................... kg 67
Basic weight ............................................................. kg 66 PRE 541 21 010 040219 Sa01
Transport device with puncture
6 proof wheels
Tamper foot widths Dimensions
H L L1 W Working width (tamper plate) ................................... mm 280
(160-330mm)
Dimensions inDimensions
mm in mm
on
ering
insulated
bow steering bow
eaning
housingair filter housing B H L BL1 HW L L1 W
ive covering BVT 65 BVT350
65 1030 728 350335 1030
280 728 335 280
ice
point lifting device
starter
ng
castor
aid as loading aid
uency
y variable frequency
enation
stop/fuel TECHNICAL DATA
Technical DataTechnical Data
of engine stop/fuel BOMAG BOMAG
BVT 65 BVT 65
Warranty
Weights Weights
Equipment Operating weight CECE ...........................................
Operating kg 67
weight CECE ........................................... kg 67
puncture Basic weight .............................................................
ort device with puncture kg 66
Basic weight ............................................................. kg 66
wheels
r foot widths Dimensions Dimensions
30mm) Working width (tamperWorkingplate) width...................................
(tamper plate) ...................................
mm 280 mm 280
nsr foot extensions Driving Characteristics
Driving Characteristics
meter Working speed Working max. ................................................ m/min 20
speed max. ................................................ m/min 20
l painting Area coverage Area max. coverage
................................................. m2/h 336
max. ................................................. m2/h 336
t
3
e Kit Drive Drive
H WARRANTY Engine manufacturer Engine................................................
manufacturer ................................................
Honda Honda
0,136 Type .........................................................................
Type .........................................................................
GX 100 GX 100
Emission stageEmission stage .........................................................
......................................................... StageV/CARB P.3 StageV/CARB P.3
0,167 Cooling .....................................................................
Cooling .....................................................................
air air
Number of cylinders Number of cylinders .................................................
................................................. 1 1
Performance SAE Performance kW
SAE J 1349 ........................................
J 1349 ........................................ 2,3 kW 2,3
Fuel ..........................................................................
Fuel .......................................................................... Gasoline Gasoline
Drive system ............................................................
Drive system ............................................................ mech. mech.
Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... ....................
0,9 l/h 0,9
ng bow, Exciter systemExciter system
Frequency ................................................................
Frequency ................................................................ Hz 10- 11,8Hz 10- 11,8
Impact force .............................................................
Impact force ............................................................. kN 16,0 kN 16,0
dle
Dimensions in mm
e plate Capacities Capacities
w oil H H1 H2 L L1 W3,0
Fuel ..........................................................................
Fuel .......................................................................... l l 3,0
Technical modifications reserved.
Technical Machines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
BP 10/35 658 962 700 1084 532 350
BP 12/40 658 962 700 1084 542 400
7
Shipping dimensions in m3
BT 80 D 0,268
BT 80 D
Vibration insulated steering bow
Self-cleaning air filter housing
Integrated fuel filter
Dimensions in mm
Protective engine covering
Engine shut-down switch B
integrated in steering handle BT 80 D 3
Infinitely variable frequency
Single point lifting device
Plastic castor as loading aid
Semi-automatic decompression
Technical Data
Recoil starter
3-2-1 Warranty
Optional Equipment Weights
Operating weight CE
Transport device with puncture Basic weight ..........
proof wheels
Tamper foot widths Dimensions
(280-290mm) Working width (tamp
Tool kit Driving Characteri
Service Kit Working speed max
TOUGH WARRANTY
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance ISO 30
Speed ....................
Fuel .......................
Drive system ..........
Fuel comsump. ave
Exciter system
Frequency .............
Impact force ...........
Capacities
Fuel .......................
Technical modifications reserve
Fields of application:
Earthwork and asphalt construction.
Pipeline, trench and sewer line construction, back-
fills, foundations and repair work on asphalt.
Standard Equipment
9
Shipping dimensions in m3
BVP 10/30 0,111
BVP 12/50 A 0,251
Standard Equipment
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
11
Shipping dimensions in m3
BVP 10/36 0,146
BVP 10/36
Vibration insulated steering bow,
foldable
Detachable steering handle
Dimensions in mm
Highly wear resistant base plate
Automatic shutdown at low oil
level BVP 10/36
Recoil starter
Single point lifting device
Fully protected V-belt
Carrying handles
Technical Data
3-2-1 Warranty
Optional Equipment
Weights
Sprinkler system (+7kg) Operating weight C
Transport wheels (+4kg) Basic weight ..........
Plastic mat
Tool kit Dimensions
Service Kit Working width .......
TOUGH WARRANTY Driving Characteri
Comfort guide handle Working speed, ma
Special painting Max. gradeability (d
Engine protection frame
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance SAE J
Speed ....................
Drive system .........
Fuel .......................
Fuel comsump. ave
Exciter system
Frequency .............
Centrifugal force ....
Amplitude ..............
Capacities
Fuel .......................
Fields of application: Water ....................
Technical modifications reserve
Earthwork, asphalt and paving applications.
Repair work on roads and agricultural roads, pipe-
line and trench construction, landscape gardening.
Standard Equipment
13
Shipping dimensions in m3
BVP 18/45 0,149
BVP 18/45 D 0,181
Standard Equipment
15
Shipping dimensions in m3
BPS 18/45 0,240
BPS 18/45
Vibration insulated steering bow,
foldable
Engine protection frame
Dimensions in mm
Highly wear resistant base plate
Automatic shutdown at low oil H
level BPS 18/45 5
Recoil starter
Single point lifting device
Fully protected V-belt
Carrying handles
Technical Data
Optional Equipment
Standard Equipment
17
Shipping dimensions in m3
BP 10/35 0,136
BP 12/40 0,167
BP 10/35, BP 12/40
Vibration insulated steering bow,
foldable
Detachable steering handle
Dimensions in mm
Highly wear resistant base plate
Automatic shutdown at low oil H
level BP 10/35 6
Recoil starter BP 12/40 6
Fully protected V-belt
Carrying handles
Single point lifting device
Technical Data
Protective covering
3-2-1 Warranty
Engine protection frame
Weights
Optional Equipment Operating weight CE
Basic weight ...........
Sprinkler system (+10kg)
Sprinkler system 6l Dimensions
(+4kg/BP10/35) Working width ........
Transport wheels (+4kg) Driving Characteris
Plastic mat Working speed, max
Tool kit Max. gradeability (d
Special painting
Service Kit Drive
TOUGH WARRANTY Engine manufacture
Comfort guide handle Type .......................
Emission stage ......
Cooling ...................
Number of cylinders
Performance SAE J
Speed ....................
Drive system ..........
Fuel ........................
Fuel comsump. ave
Exciter system
Frequency ..............
Centrifugal force ....
Amplitude ...............
Capacities
Fuel ........................
Fields of application: Water .....................
Technical modifications reserve
Earthwork, asphalt and paving applications.
Repair work on roads and agricultural roads, pipe-
line and trench construction, landscape gardening.
Standard Equipment
19
Shipping dimensions in m3
BP 12/50 A 0,195
BP 12/50 A
Highly wear resistant special
base plate
Sprinkler system
Dimensions in mm
Vibration insulated steering bow,
foldable H
Detachable steering handle BP 12/50 A 6
Automatic shutdown at low oil
level
Recoil starter
Reinforced centrifugal clutch
Technical Data
Single point lifting device
Fully protected V-belt
Carrying handles
3-2-1 Warranty Weights
Operating weight CE
Optional Equipment Basic weight ..........
Standard Equipment
starter
rced
clutch
ice
TECHNICAL DATA
centrifugal clutch
Technical DataTechnical Data
point lifting device BOMAG BOMAG
rotected V-belt BP 12/50 A BP 12/50 A
ng handles
Warranty Weights Weights
Operating weightOperating
CECE ...........................................
weight CECE ...........................................
kg 82 kg 82
Equipment Basic weight .............................................................
Basic weight .............................................................
kg 74 kg 74
21
Shipping dimensions in m3
BP 20/50 0,236
BP 20/50 D 0,245
Standard Equipment
23
Shipping dimensions in m3
BP 25/50 0,236
BP 25/50 D 0,245
Standard Equipment
25
Shipping dimensions in m3
BPR 25/40 0,385
BPR 25/40 D 0,432
Standard Equipment
Technical Data
Technical modifications reserved. Machines may be shown with options.
BOMAG BOMAG
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage .........................................................
BOMAG BOMAG StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG
Hellerwald
Hellerwald Hellerwald air air
Number of cylinders D-56154 .................................................
Boppard
D-56154 Boppard
P.O. Box 5162
D-56154 Boppard
P.O. Box 5162 1 1
Performance SAE P.O. JBox1349 (0)6742 - 1000 kW
5162........................................
Tel. (0)6742 Tel.
- 1000 2,6 2,6
Tel. (0)6742 - 1000 Fax (0)6742 Fax (0)6742 - 3090 min-1
Speed .......................................................................
- 3090 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 mech. mech.
65PRE Fuel ..........................................................................
010 692 65 010
040219 Sa03
040219 Sa03 040219 Sa03 Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
27
Shipping dimensions in m3
BPR 25/50 0,420
BPR 25/50 D 0,471
Standard Equipment
Technical Data
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
BOMAG BOMAG
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG BOMAG BOMAG air air
Hellerwald Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 Tel. (0)6742 - 1000 min-1
Speed .......................................................................
- 1000 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 Fax- 3090
(0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
52 PRE
Fuel comsump. aver. during operation .................... l/h
010 692 52040219
010 Sa03 040219 Sa03040219 Sa03
0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
29
Shipping dimensions in m3
BPR 35/42 D 0,425
BPR 35/60 0,556
BPR 35/60 D 0,607
31
Shipping dimensions in m3
BPR 25/50 D 0,594
BPR 35/60 0,652
BPR 35/60 D 0,711
TECHNICAL DATA
on the steering
on the rod
steering
Technical Data
Highly wear-resistant,
on therod
Highly wear-resistant,
steering rod
Highly wear-resistant,
Technical Technical
DataBOMAG Technical
Data Data BOMAG BOMAG BOMAG
BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG BOMAG BOMAG
late powder-coated
powder-coated
base powder-coated
plate base platebase plate BPR 25/50 D BPR 35/60BPR 25/50 BPRD 35/60
BPR BPR
DD 35/60
25/50
BPR 25/50
BPR BPR
D 35/60BPR35/60
35/60D 35/60BPR
BPR D 35/60 D
Fully protected
FullyV-belt
protected
Fully V-belt
protected V-belt
sion Automatic decompression
Automatic Automatic
Weights decompression decompression
Weights Weights Weights
0D) Operating
(BPR25/50D,BPR35/60D) weight
(BPR25/50D,BPR35/60D)
(BPR25/50D,BPR35/60D) Operatingkgweight
CECE (W) ............. Operating169
CECE (W) CECE
Operating
weight .............
weight 228CECE
(W) kg 169.............
.............
(W) kg 248 169kg 228 169 228 248
228 248 248
Basic
Recoil starter weight
Recoil starter
Recoil starter Basic weight
...................................... 166
......................................
kgBasic weightBasic 225kg 166kg 245
......................................
weight ...................................... 166kg 225 166 225 245
225 245 245
on Back-up drive
Back-up
protection
drive
Back-upprotection
drive protection
Dimensions
t low oil Automatic shutdown
Automatic Automatic
at
shutdown at low Dimensions
low oil shutdown oil at low Dimensions
oil Dimensions
level Basic levelworkinglevel Basic working
width ........................... mmBasic width ...........................
working
530 Basic width
working 630mm 530mm 630
...........................
width 530mm 630
........................... 530 630 630
630 630 630
Lowest
(BPR35/60) passing
(BPR35/60) (BPR35/60) Lowest passing
height ....................... mmLowest height
750passing
Lowest 670
.......................
height
passing 750mm 730
mm .......................
.......................
height 750mm 670 750 670 670
730 730 730
Min. height w. steering in top position Min. height mm w. steering
Min. height
940 Min. in steering
w. top
heightposition topmm
1.030
w.insteeringposition top mm
in 940 position 940mm 1.030
1.030 940 1.030 1.030
1.030 1.030 1.030
3-2-1 Warranty
Max.3-2-1 Warranty
height w.3-2-1 Warranty
steering in top Max.
position mm
height w. steering
Max. height
1.260Max. in steering
w. top
height topmm
w.in1.180
position steering
position topmm
in1.260 position 1.260
1.180 1.260 1.180
mm 1.180 1.180
1.180 1.180 1.180
otectionHour meterHour (Engine
meterprotection
Hour
(Engine
meter protection
(Engine protection
hood BPR35/60)
hood Characteristics
Driving BPR35/60)
hood BPR35/60) Driving Characteristics Driving Characteristics
Driving Characteristics
3 Working speed, max. ........................Working speed, Working
m/min max.
20 speed,
Working max.speed,
........................
20max.
........................ m/min........................
20 m/min2020 m/min2020 20 20
20 20 20
Optional Equipment
Optional Equipment
Optional
Max. gradeability Equipment
(dep. on soilMax. . %Max. gradeability
con.)gradeability 32(dep.Max. on gradeability
(dep.
soil con.) on . soil
32 (dep.
% con.) on32 .soil%con.)3232. % 3232 32 32
32 32 32
0,136
Drive Drive Drive Drive
0,167 Engine
otectionFully closed
ength hood made
Fully
engine
hood
closed protection
Fully
manufacturer
of high-strength
made hood
engine
closed protection
of high-strength
made
engine protection
Engine
Engine manufacturer
.........................
of high-strength Hatzmanufacturer
Engine manufacturer
.........................
Honda .........................
......................... Hatz Hatz
Hatz Hatz
Honda Honda HatzHonda Hatz Hatz
Type
steel (+10kg)
steel (+10kg) steel (+10kg) Type Type ..................................................
Type ..................................................
..................................................
.................................................. 1B20 GX 160 1B20 1B20 GX
1B20 1B20160 GX 160 1B20
GX 160 1B20 1B20
Emission stage
Emission stage .................................. Emission stage
Emission
V ..................................
stage
..................................
Stage StageVV StageV/CARB
..................................
StageV/CARB Stage P.3V Stage Stage V StageV/CARB
StageV/CARB
P.3 Stage P.3
V StageP.3V Stage V
kg) Transport wheels
Transport (+5kg)
Transport
wheels (+5kg)
wheels (+5kg) Cooling air ..............................................
Cooling ..............................................
Cooling ..............................................
Cooling .............................................. air air airair airair air air
air air air
Tool kit Number
Tool kit Tool kit ..........................
of cylinders Number of Number cylinders1 of..........................
Number
cylinders of..........................
cylinders
1 11
..........................
1 11 1 11 1 1
Special Performance
painting
Special painting
Special
ISO 3046 painting Performance
..................... kW Performance
ISO 3,13046Performance
ISO 3046 ISO 3,1 kW 3,1
.....................
..................... 3046
kW ..................... 3,1kW 3,1 3,1 3,1 3,1
Service Performance
KitService KitService
SAE J 1349 Kit ..................
Performance kW Performance
SAE J 1349 Performance
SAE J 1349 SAE ..................
3,6
.................. J 1349 ..................
kW kW kW 3,6 3,6 3,6
ng bow,Electric Speed
meter starter
Electric
+ Hourstarter
Electric
meter+ Hour
startermeter+ Speed
Hour meter
................................................ Speed3.000
min-1 ................................................
3.600
................................................ min-1 3.000 min-13.000
Speed ................................................ 3.000
min-13.600
3.000 3.600 3.600
3.000 3.000 3.000
(+20kg/BPR35/60D)
(+20kg/BPR35/60D)
Drive system (+20kg/BPR35/60D) Drive system
..................................... Drive system Drive
.....................................
mech. mech. mech. mech.
.....................................
system ..................................... mech. mech.mech. mech. mech. mech. mech. mech.
dle TOUGH WARRANTY
TOUGH
Fuel WARRANTY
TOUGH WARRANTY Fuel Fuel ...................................................
Fuel Gasoline
...................................................
................................................... Diesel Diesel Diesel
Diesel
................................................... Diesel
Gasoline Gasoline Gasoline
Diesel Diesel Diesel
Dimensions
Fuel comsump. aver. in mm Fuel comsump.
during operation l/hFuel comsump.
0,7 Fuel
aver. duringcomsump.
aver. during
operation aver.
1,1 operation
l/h during l/h 0,7
0,7 operation 0,7l/h 1,1 0,7 1,1 1,1
0,7 0,7 0,7
e plate
w oil Exciter system H H1 H2
Exciter L system
Exciter
system L1 W
Exciter system
Frequency
Frequency ......................................... Frequency
85 Frequency
.........................................
.........................................
.........................................
Hz 80 Hz 85 Hz 8085 Hz 8085 80 80
80 80 80
BP 10/35 force ................................
Centrifugal 658 Centrifugal
962 700 kN 1084
Centrifugal
force 532
Centrifugal 350force
force ................................
35................................
................................
25 kN 25 kN 3525 kN 3525 35 35
35 35 35
BP 12/40
Capacities 658 Capacities
962 700Capacities 1084 Capacities
542 400
l Fuel ...................................................
3,0 Fuel ...................................................
Fuel ...................................................
Fuel ................................................... 3,1 l 3,0 l 3,0l
3,0 3,0
3,1 3,1 3,1
3,0 3,0 3,0
Technical modifications reserved. Machines mayTechnical
be shownmodifications
with options.
Technical
reserved.
modifications
Technical
Machines
reserved.
modifications
may beMachines
shownreserved.
with
mayoptions.
be
Machines
shown with
mayoptions.
be shown with options.
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
33
Shipping dimensions in m3
BPR 40/60 D 0,590
BPR 40/60 D
Fully closed engine protection
hood made of high-strength
steel
Dimensions in mm
Comfortable control lever
Height adjustable steering rod H
Low vibration steering rod BPR 40/60 D 7
Steering rod lockable in
transport and working position
Vibration and throttle regulation
on the steering rod
Technical Data
Highly wear-resistant,
powder-coated base plate
Fully protected V-belt
Automatic decompression Weights
Recoil starter Operating weight CE
3-2-1 Warranty Basic weight ..........
Hour meter (Electric starter)
Dimensions
Optional Equipment Basic working width
Lowest passing heig
Min. height w. steer
Transport wheels (+5kg) Max. height w. stee
Electric starter (+20kg)
Tool kit Driving Characteri
Special painting Working speed, ma
Plastic mat Max. gradeability (d
Service Kit
TOUGH WARRANTY Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance ISO 30
Speed ....................
Drive system ..........
Fuel .......................
Fuel comsump. ave
Exciter system
Frequency .............
Fields of application: Centrifugal force ....
Amplitude ..............
Earthwork and paving applications.
Capacities
Construction of roads, forestry roads and railtracks, Fuel .......................
Technical modifications reserve
backfills, trench and sewer line construction, land-
scape gardening, foundations.
Standard Equipment
35
Shipping dimensions in m3
BPR 45/55 D 0,739
BPR 50/55 D 0,739
Shipping dimensions in m3
BPR 45/55 D
ns in m3 0,739
BPR 50/55 D
0,739 0,739
0,739
Standard Equipment
t
Engine protection hood
hood Comfortable control lever
ol lever Low vibration steering rod Dimensions in mm B
ering rod Height adjustable steering rod H
rodDimensions
lockable in in mm H H1 H2 L L1 W W1 W2
steering Steering
rod D
able in transport and working position H H1
BPRH2
45/55LD L1 790
W 980
W1 1350
W2 1700 900 450 550 750 P
Vibration and throttle regulation
king position BPR1350
50/551700
D T
BPR 45/55 D 790 980 900 790
450 980
550 1350
750 1700 900 450 550 750
on the steering rod
ttle regulation F
BPR 50/55 D
Highly wear-resistant, 790 980 1350 1700 900 450 550 750
d
ant, powder-coated base plate PRE 692 59 010 040219 Sa02
Technical Data
36
se plate Automatic decompression
BOMAG BOMAG
Technical Data
pression Multi-functional, foldable BOMAG BOMAGBPR 45/55 D BPR 50/55 D
oldable single-point lifting facility
BPR 45/55 D BPR 50/55 D
Extension plates (550mm) Weights
Dimensions in Dimensions
mm Dimensions
in mm in mm
ring
adjustable
Height
rod adjustable
steering rodsteering rod
ngn rodSteering
lockable rod
in lockable in H H1 H2 HL H1 L1 H H2W H1 LW1 H2 L1W2 LW L1 W1 W W2 W1 W2
ort
position
and
transport
working and
position
BPR working
45/55 Dposition
BPR790 45/55980 DBPR1350 45/55 790
1700
D 980 900 7901350
450 980 1700
550 1350
900
750 1700
450 900 550 450 750 550 750
on
egulation
and
Vibration
throttleand
regulation
throttle regulation
BPR 50/55 D BPR790 50/55980 DBPR1350 50/55 790
1700
D 980 900 7901350
450 980 1700
550 1350
900
750 1700
450 900 550 450 750 550 750
steering
on the rodsteering rod
wear-resistant,
Highly wear-resistant,
r-coated
late powder-coated
sion
atic decompression TECHNICAL DATA
base plate base plate
Technical DataTechnical Technical
Automatic decompression
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
ble
unctional,
Multi-functional,
foldable foldable BPR 45/55 D BPR 45/55
BPR D D45/55
50/55
BPR BPRD 50/55BPR
D 50/55 D
ity
pointsingle-point
lifting facility
lifting facility
sion
mm)plates
Extension (550mm)
plates
Weights (550mm) Weights Weights
c starter
Electric starterOperating weight Operating
CECE (W) weight
Operating CECE (W) CECE
....................................
weight kg
kg ....................................
385
....................................
(W) 390
385kg 385 390 390
starter
Recoil starter Operating weight Operating
CECE (W1) weight CECE (W1)CECE
..................................
Operating weight kg
kg ..................................
400
..................................
(W1) 405
400kg 400 405 405
up
on drive
Back-up
protectionOperating
drive protectionweight Operating
CECE weight
Operating
(W2) CECE (W2)
weight
.................................. kg 415
..................................
CECE (W2) kg 415
.................................. 420
kg 415 420 420
ng
oil signal
level
Warning at low Basic
signal atweight
oil level Basic weight
level kg 395
.............................................................
Basic kg
weight .............................................................
low oil............................................................. 400
395kg 395 400 400
5/55D)(BPR45/55D) Dimensions Dimensions Dimensions
Warranty
3-2-1 Warranty Basic working width Basic.................................................
workingBasic width .................................................
working mm
width .................................................
mm 550 550
550mm 550 550 550
meterHour meterWorking width without Working extension
width
Working bars
without (W)
width ...............
extension
without bars mm
extension 450 (W) mm
(W) ...............
bars 450
450mm
............... 450 450 450
Lowest passing Lowest height .............................................
passing
Lowest height
passing.............................................
mm 790 mm
height ............................................. 790
790mm 790 790 790
Equipment
Optional Equipment Min. height w. steering
Min. height in topw.position
Min. height ......................
steering in steering
w. top position ......................
mm
in top position mm
980...................... 980
980mm 980 980 980
3 Max. height w. steering
Max. height in topw.position
Max. height .....................
steering in steering
w. top position in mm .....................
top 1.220
position mm
..................... 1.220 1.220 1.220
mm
1.220 1.220
OMIZERECONOMIZER
(+5kg) (+5kg)
t Tool 0,136
kit Driving Characteristics
Driving Characteristics
Driving Characteristics
al painting
Special paintingWorking speed,Working max. ...............................................
speed,
Working max. ...............................................
speed, m/min 28 m/min 28 m/min
max. ............................................... 28 28 28 28
0,167
matPlastic matMax. gradeability (dep.
Max. on Max.
soil con.)
gradeability (dep.........................
gradeabilityon soil con.)
(dep. on........................
%soil con.) %
35........................
35 %35 35 35 35
sion
750mm)
plates
Extension
(650/750mm)
plates
Drive (650/750mm) Drive Drive
e Kit Service Kit Engine manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer ................................................
Kohler Hatz Kohler Hatz
Kohler Hatz
rsion
TC US EPA
Version
4 NRTC EPA 4 NRTC
Type .........................................................................
Type .........................................................................
Type .........................................................................
RD 15 440 RD 1B15 40
440 RD 15 440
1B 40 1B 40
50:6,8kW)
5:6,2kW
(BPR45:6,2kW
- BPR50:6,8kW)
- BPR50:6,8kW)
Emission stage Emission
.........................................................
stage
Emission .........................................................
stage .........................................................
Stage V StageStage
V VStage V Stage V Stage V
H WARRANTY
TOUGH WARRANTY
Cooling .....................................................................
Cooling .....................................................................
air
Cooling ..................................................................... air air air air air
ng bow, Number of cylinders Number .................................................
of Number
cylindersof.................................................
1
cylinders ................................................. 1 1 1 1 1
Performance ISO Performance
3046 ............................................
ISO 3046 ............................................
Performance kW 6,8 kW
ISO 3046 ............................................ 6,7
6,8kW 6,8 6,7 6,7
Speed ....................................................................... min-1 3.000 min-1 3.000
Speed .......................................................................
Speed ....................................................................... 3.000 3.000 3.000
min-1 3.000
dle
Dimensions in mm
Drive system ............................................................
Drive system Drive............................................................
system mech. mech.
............................................................ mech. mech. mech. mech.
e plate Fuel ..........................................................................
Fuel ..........................................................................
Diesel
Fuel .......................................................................... Diesel Diesel Diesel
Diesel Diesel
w oil Fuel comsump. Fuel aver.comsump.H Fuel
during H1
operation H2
aver. during
comsump. L during
....................
operation
aver. L1 W1,4 ....................
l/h....................
operation l/h 1,5
1,4l/h 1,4 1,5 1,5
BP 10/35
Exciter systemExciter 658
system962system
Exciter 700 1084 532 350
Frequency ................................................................
Frequency Frequency
................................................................
Hz 70 Hz
................................................................ 66
70 Hz 70 66 66
BP 12/40 forceCentrifugal
Centrifugal 658 962 700 1084 542
.......................................................
force kN 400
.......................................................
Centrifugal 45 kN
force ....................................................... 50
45 kN 45 50 50
Amplitude .................................................................
Amplitude .................................................................
mm 1,55 mm 1,55
Amplitude ................................................................. 1,85
mm 1,55 1,85 1,85
Capacities CapacitiesCapacities
Technical Data
Fuel .......................................................................... l 5,0
Fuel .......................................................................... l 5,0l5,0
Fuel ..........................................................................
BOMAG
5,0 5,0
BOMAG
5,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG
Hellerwald
BOMAG BOMAG
Hellerwald Hellerwald
air air
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard
D-56154 Boppard 1 1
Performance SAE J 1349 ........................................
P.O. Box 5162 P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 Tel. (0)6742 - 1000 min-1
Speed .......................................................................
- 1000 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 Fax
- 3090
(0)6742 - 3090 mech. mech.
59 PRE
010 692 59
Fuel ..........................................................................
040219
010 Sa02 040219 Sa02040219 Sa02
Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
37
Shipping dimensions in m3
BPR 55/65 D 0,873
BPR 60/65 0,891
BPR 60/65 D 0,873
Shipping dimensions in m3
BPR 55/65 D 0,873
ns in m3
BPR 60/65 0,891
0,873
BPR 60/65 D 0,873
0,891
Standard Equipment
0,873
nt Engine protection hood
Comfortable control lever
hood Low vibration steering rod
ol lever Height adjustable steering rod Dimensions in mm
B
ering rod Steering rod lockable in H H1 H2 L L1 W W1 W2 H
Dimensions in mm
steering transport
rod and working position BPR 55/65 D 790 980 1350 1700 900 450 650 750 D
able in Vibration and throttle regulationH H1 H2 L L1 W W1 W2 P
king position BPR 60/65 790 990 1350 1735 970 450 650 750
on the steering
BPRrod55/65 D 790 980 1350 1700 900 450 650 750 T
ttle regulation
Highly wear-resistant,
BPR 60/65 790
BPR 60/65 D 790 980 1350 1700 900
990 1350 1735 970 450 650 750
450 650 750 F
d powder-coated base plate
ant, BPR 60/65 D 790 Technical
980 Data900
1350 1700 450 650 750 BOMAG BOMAG BOMAG
Automatic decompression PRE 692 83 010 040219 Sa02
38
se plate Multi-functional, foldable
Technical Data BPR 55/65 D BPR 60/65 BPR 60/65 D
pression single-point lifting facility BOMAG BOMAG BOMAG
oldable Extension plates (650mm) Weights BPR 55/65 D BPR 60/65 BPR 60/65 D
facility Electric starter Operating weight CECE (W) ............. kg 435 400 440
Dimensions in mm Dimensions Dimensions
in mm Dimensions in mm in mm
ring rodHeight adjustable
Height steering
adjustable
Heightrod adjustable
steering rod steering rod
n Steering rodSteering
lockablerod Steering H rodH1
in lockable H2 inL
inlockable L1 WH W1 H1 W2 H2
H LH1 HL1 H2 H1 W
L H2 W1
L1 LW2 W L1 W1 WW2 W1 W2
positiontransportBPRand
transport
working
55/65 D andtransport
position
working
790 and position
980 working
BPR
135055/65position
1700DBPR 900 55/65 450
790 BPR
D 650 98055/65
7501350
790
D 1700
980 790 900
1350980 450
17001350 650
900 1700 750
450 900
650 450 750 650 750
egulation VibrationBPR
and
Vibration
throttle and
60/65
Vibration
regulation
throttle andregulation
790 990 BPR
throttle regulation
135060/651735 BPR 970 60/65 450
790 BPR65099060/65
7501350
790 1735 990 790 970
1350990 450
17351350 650
970 1735 750
450 970
650 450 750 650 750
on the steering
on the rodsteering
on therod steering rod
BPRHighly
60/65 D
Highly wear-resistant, Highly790
wear-resistant, 980 BPR
wear-resistant, 135060/651700DBPR 900 60/65 450
790 BPR
D 650 98060/65
7501350
790
D 1700
980 790 900
1350980 450
17001350 650
900 1700 750
450 900
650 450 750 650 750
late
sion
powder-coated
TECHNICAL DATA
powder-coated
base plate
Technical Data
Automatic decompression
powder-coated
AutomaticAutomatic
base platebase plate
decompression
Technical Data
decompression
Technical
BOMAG Technical
Data Data BOMAG BOMAG BOMAG
BOMAG BOMAG
BOMAG BOMAGBOMAGBOMAG BOMAG BOMAG
ble Multi-functional,
Multi-functional,
foldable
Multi-functional,
foldable foldable BPR 55/65 D BPR 60/65BPR 55/65 BPRBPR
D 60/6555/65
BPRD
BPR
D60/65
55/65
BPRD 60/65
BPR 60/65BPR
BPR60/65 D 60/65BPR
D 60/65 D
ity single-pointsingle-point
lifting facility
single-point
lifting facility lifting facility
mm) Extension plates
Extension
Weights (650mm)
Extension
plates (650mm) platesWeights
(650mm) Weights Weights
Electric Operating
Electricweight
starter starter
ElectricCECE starter Operatingkg
(W) ............. Operating
weight 435
CECE weight
Operating CECE
(W) .............
weight 400 kg
(W)CECE.............
(W) kg 440
435 ............. 435kg 400 435 400 440
400 440 440
Operating
Recoil starter weight
Recoil starter Recoil CECEstarter ........... kg
(W1) Operating Operating
weight 455
CECE weight
(W1)CECE
Operating 420
...........
weight (W1) 455 kg
kg...........
CECE (W1) 460455kg 420
........... 455 420 460
420 460 460
on Back-upOperating
drive
Back-up weight
protection
drive
Back-up CECE
protection (W2)
drive ........... kg
Operating
protection Operating
weight 466
CECE weight
(W2)CECE
Operating 431
(W2)
...........
weight CECE 466 kg
kg...........
(W2) 471466kg 431
........... 466 431 471
431 471 471
Basic
oil level Warning signal weight
Warning ......................................
at lowsignal
Warning
oil level
at low
signal Basic
oil level
at low oil levelkg
weight Basic 450
weight
......................................
Basic 415 kg 450
......................................
weight kg 455
......................................450 kg 415450 415 455
415 455 455
(BPR55/65D) (BPR55/65D)
Dimensions (BPR55/65D) Dimensions Dimensions Dimensions
3-2-1 Warranty
3-2-1
Basic Warranty
working 3-2-1
widthWarranty Basic working
........................... mm Basicwidth ...........................
Basicwidth
working
650 working widthmm 650 mm 650 650mm 650
...........................
...........................
650 650 650 650
650 650 650
Hour meter Hour width
Working meter Hour meter
without extension Working
bars (W) width
mm without
Working 450widthWorking
extension
withoutwidth
bars mm extension
without
(W)
extension
450 450(W)
bars mmbars 450450 mm 450
(W) 450 450 450
450 450 450
Lowest passing height ....................... Lowest passing mm Lowest height Lowest
790passing .......................
passing
height height 790 mm 790
mm .......................
.......................
790 790mm 790 790 790 790
790 790 790
Optional Equipment
Optional
Min. heightEquipment
Optional
w. steering Equipment Min. height
in top position mm w. steering
Min. 980 Min.
height in top
w. height
position
steering w.in990topmm
steering in980
position top mmposition 980980mm 990 980 990 980
990 980 980
3 Max. height w. steering in top Max. positionheight mm w. steering
Max. height
1.220 Max.in top
w. height
position
steering w.in mm
steering
top
1.220 in1.220
position topmm position mm 1.220
1.220
1.220 1.220 1.220 1.220
1.220 1.220 1.220
ECONOMIZER ECONOMIZER
(+5kg)ECONOMIZER (+5kg) (+5kg)
0,136
Tool kit Driving
Tool Characteristics
kit Tool kit Driving Characteristics Driving Characteristics
Driving Characteristics
Special Working speed, max. painting Working speed,
........................ m/min
Working max. Working
28 speed,........................
max.speed, 28max.
m/min ........................
28 m/min2828 m/min
........................ 2828 28 2828 28 28
0,167 painting
Max.
Plastic mat
Special painting
gradeability
Plastic
Special
matPlastic maton soilMax.
(dep. con.)gradeability
. %Max. 35 (dep. Max.on soil
gradeability gradeability
con.)on
(dep. . soil
35 (dep.
% con.) on35.soil%con.) 35.35 % 3535 35 3535 35 35
750mm)Extension plates
Extension
Drive (550/750mm)
Extension
plates (550/750mm)
platesDrive(550/750mm) Drive Drive
Service Engine
Kit Service KitService Kit
manufacturer Engine manufacturer
......................... Engine Engine
.........................
manufacturer
Kohler manufacturer Kohler Hatz
Honda .........................
......................... Kohler Honda Kohler Honda Hatz Honda Hatz Hatz
TC US Version
TypeUS
EPA Version
4 NRTCUSEPA Version
4 NRTC EPAType 4 NRTC ..................................................
.................................................. TypeKD 15Type GX 390 KD 15 440
440 ..................................................
.................................................. 1B40
KD 15 440 GX KD390 GX 390 1B40
15 440 GX 390 1B40 1B40
(BPR60/65D) (BPR60/65D) (BPR60/65D) Emission stage
Emission stage .................................. Emission..................................
Stage Emission
stage
V stage Stage V Stage
..................................
StageV/CARB
.................................. P.3 Stage V VStageV/CARB P.3 Stage
Stage V StageV/CARB V StageP.3
StageV/CARB
P.3 V Stage V
TOUGHCooling
WARRANTY
TOUGH WARRANTY
TOUGH WARRANTY Cooling ..............................................
.............................................. Cooling air ..............................................air
Cooling ..............................................
air airair airair air air
air air air
ng bow, Number of cylinders .......................... Number of cylinders
Number 1 of ..........................
Number
cylinders cylinders
1 1
of ..........................
..........................
11 11 1 11 1 1
Performance ISO 3046 ..................... Performance kW ISO6,8
Performance 3046 Performance
.....................
ISO 3046 ISO 8,7 kW 6,8 kW 6,7
3046 .....................
..................... 6,8kW 8,76,8 8,7 6,7
8,7 6,7 6,7
dle Speed ................................................
Speed ................................................ Speed
min-1 3.600min-1 3.000
Speed ................................................
................................................
3.000 min-13.000 min-13.600
3.000 3.000 3.600 3.000
3.600 3.000 3.000
Dimensions in mm Drive system
Drive system ..................................... .....................................
Drive system
mech. Drive mech. mech.
system .....................................
mech.
..................................... mech. mech. mech. mech. mech. mech. mech. mech.
e plate Fuel ...................................................
Fuel ................................................... Fuel Diesel Gasoline Diesel Diesel
Fuel ...................................................
................................................... Diesel GasolineDiesel
Diesel Gasoline Gasoline Diesel Diesel
w oil Fuel comsump. aver. during H operationH1 comsump.
Fuel H2l/hFuelLaver.
1,4 Fuel
comsump. L1 comsump.
during W during
operation
aver. 3,5 l/h
aver. 1,4 operation
during
operation l/h 1,5 1,4l/h 3,51,4 3,5 1,5
3,5 1,5 1,5
BP 10/35
Exciter system 658 Exciter962 700 system 1084system
Exciter 532 350
Exciter system
Frequency
Frequency ......................................... Hz.........................................
66 Frequency
Frequency .........................................
68 Hz 66 Hz 6866 Hz 6866
......................................... 68 68
68 68 68
BP 12/40 force ................................
Centrifugal 658 Centrifugal
962 700 1084
force
kNCentrifugal
55 542 400force
................................
Centrifugal 60 ................................
kN 55 kN 6055 kN 6055
force ................................ 60 60
60 60 60
Amplitudemm
Amplitude .......................................... ..........................................
1,85 Amplitude
Amplitude ..........................................
1,96mm 1,85mm 1,96
.......................................... mm 1,96
1,85 1,85 1,96 1,96
1,96 1,96 1,96
Capacities Capacities Capacities
Capacities
Technical Data Fuel ...................................................
Fuel ...................................................
BOMAG
5,0 Fuel ...................................................
6,1 l 5,0 l
l Fuel ................................................... 5,05,0l
BOMAG
6,15,0 6,1 5,0
6,1 5,0 5,0
Technical modifications reserved. Machines may
Technical
be shownmodifications
with options.
Technical
reserved.
modifications
Machines
Technical
reserved.
may
modifications
be Machines
shownreserved.
withmay
options.
be
Machines
shown with
mayoptions.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG BOMAG BOMAG BOMAG air air
Number of cylinders D-56154 .................................................
Hellerwald
Boppard
Hellerwald HellerwaldHellerwald
D-56154 BoppardD-56154 Boppard
D-56154 1 Boppard 1
Performance SAE J 1349
P.O. Box 5162 ........................................
P.O. Box 5162 kW
P.O. Box 5162
P.O. Box2,65162 2,6
Speed .......................................................................
Tel. (0)6742 - 1000 Tel. (0)6742Tel.- 1000 min-1
(0)6742 3.600- 1000
Tel.- 1000
(0)6742 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742Fax - 3090
(0)6742 mech.- 3090
Fax- 3090
(0)6742 mech.
Fuel .......................................................................... Gasoline Gasoline
PRE 692
Fuel
040219
83 010
PRE
comsump.
Sa02
692 83PRE
aver. during operation040219
010692 83 010 040219 Sa02040219 Sa02
....................
Sa02
l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
39
Shipping dimensions in m3
BPR 50/55 D 0,944
BPR 55/65 D 0,944
Standard Equipment
41
Shipping dimensions in m3
BPR 60/65 0,944
BPR 60/65 D 0,944
Standard Equipment
43
Shipping dimensions in m3
BPR 70/70 D 1,185
BPR 100/80 D 1,376
Shipping dimensions in m3
BPR 70/70 D
ns in m3 1,185
BPR 100/80
1,185D 1,376
1,376
Standard Equipment
nt
Engine protection hood
Electric starter
hood Tip-Control
Dimensions in mm B
Back-up drive protection H
Low vibration steering rodin mm
Dimensions H H1 H2 L L1 W W1 W2 D
tection Height adjustable steering rod
H BPRH2
H1 70/70 LD L1 910
W 1030
W1 1470
W2 1860 980 550 700 850 P
ering rod Steering rod lockable in T
steering transport
rod BPR
and 70/70 Dposition 910
working
BPR1470
1030 100/80 D 980 910
1860 550 1180
700 1540
850 1890 980 650 800 950
F
able in Vibration and BPRthrottle
100/80regulation
D 910 1180 1540 1890 980 650 800 950
king position
on the steering rod PRE 692 64 010 110219 Sa03
ttle regulation Technical Data
d
44
Highly wear-resistant, BOMAG BOMAG
powder-coated base plate
Technical Data BOMAG BPR 70/70 D
BOMAG BPR 100/80 D
ant, Automatic shutdown at low oil
se plate level Weights BPR 70/70 D BPR 100/80 D
Dimensions inDimensions mm Dimensions
in mm in mm
on
p drive
Back-upprotection
drive protection
bration
rod Low steering
vibrationrodsteering rod H H1 H2 HL H1 L1 H H2W H1 LW1 H2 L1W2 L W L1
W1 W W2 W1 W2
ring
adjustable
Height
rod steering
adjustable
BPR rod steering
70/70 D rod 910
BPR 70/701030DBPR1470 70/70910
1860
D 1030 980 9101470
550 10301860
700 1470980
850 1860
550 980 700 550 850 700 850
ngn rodSteering
lockablerodin lockable in
BPR 100/80 D BPR910 100/80 1180
BPR
D 1540 100/80
910
1890D 1180980 9101540
650 11801890
800 1540980
950 1890
650 980 800 650 950 800 950
ort
position
and
transport
workingand position
working position
on
egulation
and
Vibration
throttleand
regulation
throttle regulation
steering
on the
wear-resistant,
TECHNICAL DATA
rodsteering rod
Technical DataTechnical Data
Highly wear-resistant,
Technical Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
r-coated
late powder-coated
base plate base plate BPR 70/70 D BPRBPR 70/70
100/80
BPR
D 70/70
D BPR D 100/80 D 100/80 D
BPR
atic
t lowshutdown
Automatic
oil atshutdown
low oil at low oil
level Weights Weights Weights
ble
unctional,
Multi-functional,Operating
foldable foldableweight Operating
CECE (W) weight
....................................
Operating CECE weight 557
(W) ....................................
CECE (W) kg 557kg
kg .................................... 677 557 677 677
point
ity single-point Operating
lifting facility weight
lifting facility Operating
CECE (W1) weight ..................................
Operating CECE weight(W1)CECE kg ..................................
580
..................................
(W1) kg 580kg700 580 700 700
mm)
ion plates
Extension Operating
(700mm)
plates (700mm)weight Operating
CECE (W2) Operating
weight ..................................
CECE weight(W2)CECE kg ..................................
(W2) 595
.................................. kg 595kg716 595 716 716
0/70D)(BPR70/70D) Basic weight .............................................................
Basic weight Basic weight kg 570
............................................................. kg 570
............................................................. 695
kg 570 695 695
mm)
ion plates
Extension (800mm)
plates (800mm)
Dimensions Dimensions Dimensions
00/80D)
(BPR100/80D) Basic working width Basic.................................................
working Basicwidth .................................................
working mm
width .................................................
mm 700 700mm800 700 800 800
Warranty
3-2-1 Warranty Working width without Workingextension
width without
Working bars extension
(W)
width without bars
............... 550 (W) mm
(W) ...............
mm
extension bars 550mm
............... 650 550 650 650
meterHour meterLowest passingLowest passing
Lowest height
passing.............................................
height ............................................. mm 910 mm
height ............................................. 910mm910 910 910 910
ment
ode gas
Cityadjustment
mode gasMin.adjustment Min. height
height w. steering in top w.position
Min. steering in top
w. position
height ......................
steering ......................
mm
in top 1.030
position mm 1.030
...................... 1.180 1.030 1.180
mm 1.180
3 Max. height w. steering Max. height in top w.position
Max. steering in top
height .....................
w. position
steering in mm .....................
top 1.180
position mm 1.180
..................... 1.320 1.180 1.320
mm 1.320
Equipment
Optional Equipment
0,136 Driving Characteristics Driving Characteristics
Driving Characteristics
(+5kg)Working speed,Working speed, max. ...............................................
max. ...............................................
Working speed, m/min 28 m/min 28 m/min
max. ............................................... 28 28 28 28
OMIZER
t
0,167
ECONOMIZER
Tool kit
(+5kg)
Max. gradeability Max.
(dep. gradeability
on Max.
soil con.) (dep. on soil con.)on........................
........................
gradeability (dep. %soil con.) % 35 %
35........................ 35 35 35 35
l painting
Special painting Drive Drive Drive
mat Plastic matEngine manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer HatzHatz Hatz
................................................
Hatz Hatz Hatz
mm)
ion plates
Extension (850mm)
plates (850mm) Type .........................................................................
Type .........................................................................
Type .........................................................................
1D 81 1D 811D 90 1D 81 1D 90 1D 90
0/70D)(BPR70/70D) Emission stage Emission stage
Emission.........................................................
.........................................................
stage .........................................................
Stage V Stage V VStage VStage V Stage V
Stage
mm)
ion plates
Extension (950mm)
plates
Cooling (950mm) Cooling .....................................................................
..................................................................... air
Cooling ..................................................................... air air air air air
ng bow,
00/80D)
(BPR100/80D) Number of cylinders Number of Number
cylindersof.................................................
................................................. 1
cylinders ................................................. 1 1 1 1 1
e Kit Service Kit Performance ISOPerformance
3046 ISO 3046 ............................................
............................................
Performance ISO 3046 kW 9,3 kW 9,3
............................................ 10,3
kW 9,3 10,3 10,3
dle
nmentally
liant Environmentally Speedcompliant
compliant min-1 2.700 min-1 2.700
Speed .......................................................................
.......................................................................
Speed ....................................................................... 2.600 2.700 2.600
min-1 2.600
lic oilhydraulic oil Dimensions in mm
Drive system ............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech.mech. mech. mech. mech.
e plate
orcrank-handle Fuel
Safety crank-handle
for for Fuel ..........................................................................
..........................................................................
Fuel Diesel Diesel
.......................................................................... Diesel Diesel Diesel Diesel
w
ency
3kg)oilemergency Fuel
starting (+3kg) (+3kg) Fuel
comsump.
starting H Fuel
aver.comsump.
during H1
aver.
operation
comsump. H2
during L during
operation
....................
aver. L1 W2,0 ....................
l/h....................
operation l/h 2,0 l/h
2,2 2,0 2,2 2,2
rsion
TC US EPA Version
4 NRTCBPEPA
Exciter10/35
4 NRTC
systemExciter system 658 Exciter962system 700 1084 532 350
0/70D:9,2kW)
(BPR70/70D:9,2kW) Frequency Frequency
................................................................
Frequency ................................................................ Hz 66 Hz 66 Hz
................................................................ 54 66 54 54
H WARRANTY
TOUGH WARRANTY BP 12/40 forceCentrifugal
Centrifugal 658 force 962 700 1084 542 kN 400
.......................................................
.......................................................
Centrifugal 70 kN
force ....................................................... 70 kN100 70 100 100
Amplitude .................................................................
Amplitude ................................................................. mm 1,80 mm
Amplitude ................................................................. 1,80mm
2,70 1,80 2,70 2,70
Capacities CapacitiesCapacities
Technical Data
Fuel ..........................................................................
Fuel .......................................................................... l 10,0 l
BOMAG
10,0l10,0 10,0
Fuel .......................................................................... 10,0
BOMAG10,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may be Machines
shown with
may
options.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG BOMAG BOMAG air air
Number of cylinders D-56154 .................................................
Hellerwald
Boppard
Hellerwald Hellerwald
D-56154 BoppardD-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
(0)6742 - 1000 min-1
Speed .......................................................................
Tel. (0)6742 - 1000Tel. (0)6742Tel. - 1000 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742Fax - 3090
(0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
64 PRE
010 692 64
Fuel comsump.
110219
010 Sa03
aver. during operation .................... l/h
110219 Sa03110219 Sa03
0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
45
Shipping dimensions in m3
BPR 70/70 D 1,185
BPR 100/80 D 1,376
Shipping dimensions in m3
BPR 70/70 D
ns in m3 1,185
BPR 100/80
1,185D 1,376
1,376
Standard Equipment
nt
Engine protection hood
Electric starter
hood Low vibration steering rod
Dimensions in mm B
Height adjustable steering rod H
ering rod Steering rod lockable in H H1 H2 L L1 W W1 W2
Dimensions in mm D
steering transport
rod and working position BPRH2
70/70 LD L1 910
W 1180
W1 1540
W2 1860 980 550 700 850 P
able in Vibration and throttle regulationH H1
T
king position BPRrod
on the steering 70/70 D 910 BPR1540
1180 100/80 D 980 910
1860 550 1180
700 1540
850 1890 980 650 800 950
F
ttle regulation
Highly wear-resistant,
BPR 100/80 D 910 1180 1540 1890 980 650 800 950
d powder-coated base plate PRE 692 37 010 110219 Sa02
ant, Technical Data
46
Automatic shutdown
se plate level
at low oil BOMAG BOMAG
Technical Data BOMAG BPR 70/70 D
BOMAG BPR 100/80 D
wn at lowMulti-functional,
oil foldable
single-point lifting facility Weights BPR 70/70 D BPR 100/80 D
Dimensions in Dimensions
mm Dimensions
in mm in mm
ring
adjustable
Height
rod adjustable
steering rodsteering rod
ngn rodSteering
lockable rod
in lockable in H H1 H2 HL H1 L1 H H2W H1 LW1 H2 L1W2 LW L1 W1 W W2 W1 W2
ort
position
and
transport
working and
position
BPR working
70/70 Dposition
BPR910 70/701180DBPR1540 70/70 910
1860
D 1180 980 9101540
550 11801860
700 1540
980
850 1860
550 980 700 550 850 700 850
on
egulation
and
Vibration
throttleand
regulation
throttle regulation100/80
BPR 100/80 D BPR910 1180
BPR
D 1540 100/80910
1890D 1180980 9101540
650 11801890
800 1540
980
950 1890
650 980 800 650 950 800 950
steering
on the rodsteering rod
wear-resistant,
Highly wear-resistant,
r-coated
late powder-coated
atic
t lowshutdown
Automatic
oil at
TECHNICAL DATA
base plate base plate
Technical DataTechnical Technical
shutdown
low oil at low oil
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
level BPR 70/70 D BPR BPR 100/80
70/70BPR D BPR
D 70/70 D 100/80 D 100/80 D
BPR
ble
unctional,
Multi-functional,
foldable foldable
ity
pointsingle-point
lifting facility
lifting facility Weights Weights
Weights
sion
mm)plates
Extension Operating
(700mm)
plates weight
(700mm) Operating
CECE (W) weight CECE (W) CECE
....................................
Operating weight kg
kg ....................................
547
....................................
(W) 677
547kg 547 677 677
0/70D)(BPR70/70D) Operating weight Operating
CECE (W1) weight
Operating CECE (W1)CECE
..................................
weight kg
kg ..................................
570
..................................
(W1) 700
570kg 570 700 700
sion
mm)plates
Extension Operating
(800mm)
plates weight
(800mm) Operating
CECE (W2) weight
Operating CECE (W2)CECE
weight
.................................. kg
kg ..................................
585
..................................
(W2) 716
585kg 585 716 716
00/80D)
(BPR100/80D) Basic weight Basic weight kg 560
.............................................................
Basic weight
............................................................. kg 560
............................................................. 695
kg 560 695 695
up
on drive
Back-up
protection
drive protection
Dimensions Dimensions Dimensions
Warranty
3-2-1 Warranty Basic working width Basic.................................................
workingBasic width .................................................
working mm
width .................................................
mm 700 800
700mm 700 800 800
meterHour meterWorking width without Working extension
width
Working bars
without (W)
width ...............
extension
without bars mm
extension 550 (W) mm
(W) ...............
bars 650
550mm
............... 550 650 650
ment
ode gas
City adjustment
mode gas Lowestadjustment
passing Lowest
height .............................................
passing
Lowest height
passing.............................................
mm 910 mm
height ............................................. 910
910mm 910 910 910
Min. height w. steering
Min. height in topw.position
Min. height ......................
steering in steering
w. top position in top......................
mm position1.180 mm
...................... 1.180 1.180 1.180
mm
1.180 1.180
3Equipment
Optional Equipment Max. height w. steering
Max. height in topw.position
Max. height .....................
steering in steering
w. top position in mm .....................
top 1.260
position mm
..................... 1.320 1.260 1.320
mm
1.260 1.320
OMIZER 0,136
(+5kg)Driving
ECONOMIZER Characteristics
(+5kg) Driving Characteristics
Driving Characteristics
Working speed,Working max. ...............................................
speed,
Working max. ...............................................
speed, m/min 28 m/min 28 m/min
max. ............................................... 28 28 28 28
t Tool
al painting
0,167
kit
Max.
Special painting gradeability (dep.
Max. on soil con.)
gradeability
Max. ........................
(dep. on soil
gradeability con.)
(dep. on........................
%soil con.) %
35........................
35 % 35 35 35 35
0D) matPlastic
(BPR70/70D)
matDrive
(BPR70/70D) Drive Drive
sion
mm)plates
Extension
(850mm)
plates
Engine(850mm)
manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer HatzHatz Hatz
................................................
Hatz Hatz Hatz
0/70D)
(BPR70/70D) Type .........................................................................
Type .........................................................................
Type .........................................................................
1D 81 1D 811D 90 1D 81 1D 90 1D 90
sion
mm)plates
Extension
(950mm)
plates
Emission(950mm)
stage Emission
.........................................................
stage
Emission.........................................................
stage .........................................................
Stage V StageStage
V VStage V Stage V Stage V
00/80D)
(BPR100/80D) Cooling .....................................................................
Cooling .....................................................................
air
Cooling ..................................................................... air air air air air
ng
e Kitbow,
Service Kit Number of cylinders Number .................................................
of Number
cylindersof.................................................
1
cylinders ................................................. 1 1 1 1 1
orcrank-handle Performance
Safety crank-handle
for for ISO Performance
3046 ............................................
ISO
Performance 3046 ............................................
ISO 3046 kW 9,3 kW 9,3
............................................ 10,3
kW 9,3 10,3 10,3
dle
3kg)
ency emergency
starting Speed
(+3kg)
starting.......................................................................
(+3kg) min-1 2.700 min-1 2.700
Speed .......................................................................
Speed ....................................................................... 2.600 2.700 2.600
min-1 2.600
rsion
TC US EPA
Version
4 NRTCDimensions
Drive
EPA system in mm
4 NRTC............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech.mech. mech. mech. mech.
e0/70D:9,2kW)
plate Fuel ..........................................................................
(BPR70/70D:9,2kW) Fuel ..........................................................................
Diesel Diesel Diesel Diesel
Diesel
Fuel .......................................................................... Diesel
w oilTOUGH WARRANTY
H WARRANTY Fuel comsump. Fuel aver.comsump.H Fuel
during H1
operation H2
aver. during
comsump. L during
....................
operation
aver. L1 W2,0 ....................
l/h....................
operation l/h 2,2
2,0l/h 2,0 2,2 2,2
BP 10/35
Exciter systemExciter 658
system962system
Exciter 700 1084 532 350
Frequency ................................................................
Frequency Frequency
................................................................
Hz 66 Hz
................................................................ 54
66 Hz 66 54 54
BP 12/40 forceCentrifugal
Centrifugal 658 962 700 1084 542
.......................................................
force kN 400
.......................................................
Centrifugal 70 kN
force ....................................................... 100
70 kN 70 100 100
Amplitude .................................................................
Amplitude .................................................................
mm 1,80 mm 1,80
Amplitude ................................................................. 2,70
mm 1,80 2,70 2,70
Capacities CapacitiesCapacities
Technical Data
Fuel .......................................................................... l 10,0
Fuel .......................................................................... l
BOMAG
10,0
Fuel .......................................................................... l10,0 10,0 10,0
BOMAG10,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG BOMAG BOMAG air air
Number of cylinders D-56154 .................................................
Hellerwald
Boppard
Hellerwald Hellerwald
D-56154 Boppard
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 Tel. (0)6742 - 1000 min-1
Speed .......................................................................
- 1000 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 Fax
- 3090
(0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
37 PRE
010 692 37
Fuel comsump.
110219
010 Sa02
aver. during operation .................... l/h
110219 Sa02110219 Sa02
0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
47
Shipping dimensions in m3
BPH 80/65 S 0,702
BPH 80/65 S
Hydrostatic drive
Cable remote control
Electric starter
Dimensions in mm
Engine protection hood
Highly wear resistant base plate
Automatic shutdown at low oil BPH 80/65 S
level
Lockable engine cover and dash
board
Single point lifting device ,
Technical Data
foldable
Battery disconnect switch
Easy Service Concept
-Diagnostic module with fault Weights
code display Operating weight C
-Hour meter Operating weight C
-foldable full protection hood Basic weight .........
3-2-1 Warranty Dimensions
Basic working width
Optional Equipment Lowest passing hei
Special painting Driving Character
Combination remote control Working speed, ma
cable/radio Max. gradeability (d
Mobile quick charger
Service Kit Drive
Tool kit Engine manufactur
TOUGH WARRANTY Type .....................
Emission stage .....
Cooling .................
Number of cylinder
Performance ISO 3
Speed ...................
Drive system .........
Fuel ......................
Fuel comsump. ave
Exciter system
Frequency ............
Amplitude .............
Fields of application: Centrifugal force ...
Earthwork. Capacities
Fuel ......................
Construction of roads, forestry roads and railtracks, Hydraulic ..............
Technical modifications reserv
backfills, trench and sewer line construction, land-
scape gardening, foundations.
Standard Equipment
Hydrostatic drive
Cable remote control
Electric starter
Dimensions in mm
Engine protection hood
Highly wear resistant base plate H L L1 W W1
Automatic shutdown at low oil BPH 80/65 S 785 1118 1088 650 800
level
Lockable engine cover and dash
board B
Single point lifting device , H
Technical Data BOMAG
foldable D
Battery disconnect switch BPH 80/65 S P
Easy Service Concept T
mensions in mm F
-Diagnostic module with fault Weights
H L L1 W W1 code display Operating weight CECE (W) .................................... kg 707
H 80/65 S 785 1118 1088 650 800 -Hour meter Operating weight CECE (W1) .................................. kg 750 PRE 700 15 010 050219 Sa02
48 -foldable full protection hood Basic weight ............................................................. kg 745
3-2-1 Warranty Dimensions
Basic working width ................................................. mm 800
Optional Equipment
Dimensions inDimensions
mm in mm
dprotection hood
base
wearplate
resistant base plate H L L1 HW L W1 L1 W W1
atic
t lowshutdown
oil atBPH
low 80/65
oil S BPH785
80/651118
S 1088785
650 1118
800 1088 650 800
ble
r and
engine
dashcover and dash
ice
point
e
, lifting device ,
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
itch
disconnect switch BPH 80/65 S BPH 80/65 S
ervice Concept
ostic
th fault
module with fault
Weights Weights
isplay Operating weight CECE (W)
Operating ....................................
weight kg 707
CECE (W) .................................... kg 707
meter Operating weight CECE (W1)
Operating weight .................................. kg 750
CECE (W1) .................................. kg 750
full protectionBasic
nlehood hood weight ............................................................. kg 745
Basic weight ............................................................. kg 745
Warranty Dimensions Dimensions
Basic working width
Basic.................................................
working width .................................................
mm 800 mm 800
Equipment Lowest passingLowest
height .............................................
passing height .............................................
mm 785 mm 785
l painting Driving Characteristics
Driving Characteristics
nation Working speed,Working
ontrol remote control max. ............................................... m/min 28
speed, max. ............................................... m/min 28
3adio Max. gradeability Max.(dep. on soil con.)
gradeability (dep.........................
on soil con.) ........................
% 30 % 30
quick charger
e Kit 0,136 Drive Drive
Engine manufacturer Engine................................................
manufacturer ................................................
Hatz Hatz
t 0,167
H WARRANTY Type .........................................................................
Type .........................................................................
1D 90 W 1D 90 W
Emission stageEmission stage .........................................................
......................................................... Stage V Stage V
Cooling .....................................................................
Cooling ..................................................................... air air
Number of cylinders Number of cylinders .................................................
................................................. 1 1
Performance ISO Performance
3046 ............................................ kW 10,9 kW
ISO 3046 ............................................ 10,9
min-1 3.000 min-1
Speed .......................................................................
Speed ....................................................................... 3.000
Drive system ............................................................
Drive system ............................................................ hydraulic hydraulic
ng bow, Fuel ..........................................................................
Fuel .......................................................................... Diesel Diesel
Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... 2,5
.................... l/h 2,5
dle
Dimensions in mmsystem
Exciter systemExciter
e plate Frequency ................................................................ Hz 55
Frequency ................................................................ Hz 55
w oil H .................................................................
H1 H2 L
Amplitude .................................................................
Amplitude L1
mm W1,80 mm 1,80
Centrifugal force .......................................................
Centrifugal kN 80
force ....................................................... kN 80
BP 10/35 658 962 700 1084 532 350
Capacities Capacities
BP
Fuel12/40 658 962 700 1084 542
.......................................................................... 400
Fuel ..........................................................................
l 10,0 l 10,0
Hydraulic ..................................................................
Hydraulic ..................................................................
l 25,0 l 25,0
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
49
Shipping dimensions in m3
BW 55 E 0,671
BW 55 E
Height adjustable steering rod
Dimensions in mm
Vibration and throttle regulation
on the steering rod B
Scrapers front and rear BW 55 E 6
Automatic shutdown at low oil
level
Single point lifting device
Safety control
Technical Data
Back-up drive protection
Support bars front and rear
3-2-1 Warranty
Weights
Optional Equipment Operating weight C
Basic weight ..........
Tool kit Static linear load CE
Special painting Dimensions
Service Kit Working width ........
TOUGH WARRANTY
Driving Characteri
Speed (1), forward
Speed (1), reverse
Speed (2), forward
Speed (2), reverse
Max. gradeability w
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance SAE J
Speed ....................
Fuel .......................
Starting device ......
Drive system .........
Fields of application: Fuel comsump. ave
Shipping
ons in m3dimensions in m3
BW 55 E 0,671 0,671
Standard
ent Equipment
m Sprinkler system
enedVibration
steeringdampened
rod steering rod B
Height adjustable
e steering rod steering rod H
Dimensions Dimensions in mm
Vibration
rottle and throttle
regulation regulation in mm D
odon the steering rod B C1 C2 DB HC1 L C2 O1 D O2 H SL WO1 O2 S W P
ndScrapers
rear front and rear
BW 55 E BW
67855 125
E 678 900
330 400 125 1100
330 100
400 18900 5 1100560
100 18 5 560 T
ownAutomatic
at low oilshutdown at low oil F
level
ng Single
device point lifting device PRE 620 02 010 050219 Sa03
Safety control 50
Technical Data Technical Data
Back-up drive protection BOMAG BOMAG
rotection
nt Support
and rearbars front and rear BW 55 E BW 55 E
Dimensions inDimensions
mm in mm
on
egulation
and throttle regulation
steering rod B C1 C2 BD C1 H C2 L DO1 HO2 L S O1 W O2 S W
arrs front and rearBW 55 E BW 55
678E 125 330 678
400 125
900 330
1100400
100 900
18 1100
5 100
560 18 5 560
atic
t lowshutdown
oil at low oil
ice
point lifting device
control
on
p drive protection
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
drtrear
bars front and rear BW 55 E BW 55 E
Warranty
Weights Weights
Equipment Operating weight CECE ...........................................
Operating kg 150
weight CECE ........................................... kg 150
Basic weight ............................................................. kg 141
Basic weight ............................................................. kg 141
t Static
Static linear load CECE linear kg/cm 2,7
load CECE ...........................................
........................................... kg/cm 2,7
l painting Dimensions Dimensions
e Kit Working width .......................................................... mm 560
Working width .......................................................... mm 560
H WARRANTY
Driving Characteristics
Driving Characteristics
Speed (1), forward
Speed ................................................... km/h 0- 1,1 km/h
(1), forward ................................................... 0- 1,1
Speed (1), reverse
Speed ................................................... km/h 0- 1,1 km/h
(1), reverse ................................................... 0- 1,1
3 Speed (2), forward
Speed ................................................... km/h 0- 1,6 km/h
(2), forward ................................................... 0- 1,6
Speed (2), reverse
Speed ................................................... km/h 0- 1,6 km/h
(2), reverse ................................................... 0- 1,6
0,136 Max. gradeability without/with
Max. gradeability vibr. ..........................
without/with % 25/20 %
vibr. .......................... 25/20
0,167 Drive Drive
Engine manufacturer Engine................................................ Honda
manufacturer ................................................ Honda
Type ......................................................................... GX 120
Type ......................................................................... GX 120
Emission stageEmission ......................................................... StageV/CARB P.3
stage ......................................................... StageV/CARB P.3
Cooling ..................................................................... air
Cooling ..................................................................... air
Number of cylinders Number ................................................. 1
of cylinders ................................................. 1
Performance SAE J 1349 ........................................
Performance kW 2,5
SAE J 1349 ........................................ kW 2,5
ng bow, Speed ....................................................................... min-1 2.750 min-1 2.750
Speed .......................................................................
Fuel .......................................................................... Gasoline
Fuel .......................................................................... Gasoline
Starting device Starting
......................................................... Recoil starter Recoil starter
device .........................................................
dle
Dimensions in mm
Drive system ............................................................
Drive mech.
system ............................................................ mech.
e plate Fuel comsump.Fuel aver.comsump.
during operation
aver. during....................
operationl/h 0,7
.................... l/h 0,7
w oil H H1 H2 L L1 W
Exciter systemExciter system
BP 10/35
Drive 658 ............................................................
962 700 1084 532 350
system ............................................................
Drive system mech. mech.
Frequency ................................................................ 77
Frequency ................................................................
Hz Hz 77
BP 12/40 .................................................................
Amplitude Amplitude 658 962 700 1084 542 mm 400 0,50 mm
................................................................. 0,50
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 10 kN 10
Sprinkler System
Sprinkler System
Technical Data
Type of sprinkling .....................................................
Type gravity
of sprinkling .....................................................
BOMAG
gravity
BOMAG
Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 2,5 l BP
2,5 10/35 BP 12/40
Water .......................................................................
Water .......................................................................
l 16,0 l 16,0
Weights
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG BOMAG air air
Number of cylinders .................................................
Hellerwald
D-56154 Boppard
Hellerwald
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 kW 2,6 2,6
Speed .......................................................................
Tel. (0)6742 - 1000Tel. (0)6742 - 1000 min-1 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
2 010
Fuel comsump.
050219 Sa03 050219 Sa03
aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
51
Shipping dimensions in m3
BW 71 E-2 2,260
BW 71 E-2
Electric starter
Dimensions in mm
Engine protection
Vibration dampened steering rod B
Height adjustable steering rod BW 71 E-2 8
Vibration and throttle regulation
on the steering rod
Scrapers front and rear
Protective engine covering
Technical Data
Single point lifting device
Safety control
Back-up drive protection
Support bars front and rear Weights
3-2-1 Warranty Operating weight C
Basic weight ..........
Optional Equipment Static linear load CE
Dimensions
Support wheel+Parking brake Working width ........
Tool kit
Special painting Driving Characteri
Service Kit Speed (1), forward
Environmentally compliant Speed (1), reverse
hydraulic oil Speed (2), forward
TOUGH WARRANTY Speed (2), reverse
Max. gradeability w
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance ISO 3
Speed ....................
Fuel .......................
Starting device ......
Drive system .........
Fields of application: Fuel comsump. ave
Shipping dimensions in m3
BW
s in71
m3E-2 2,260
2,260
Standard Equipment
t
Hydrostatic drive
Sprinkler system
Electric starter B
Dimensions in mm H
Engine protection
Vibration dampened steering rod B C1 C2 D H L O1 O2 S W D
Dimensions in mm P
Height adjustable steering rod
ed steering rod B BW C1
71 E-2C2 D 825H 190
L 450
O1 600
O2 1245
S 2200
W 115 25 8 710
T
Vibration and throttle regulation
steering F
on therod BW 71 E-2
steering rod 825 190 450 600 1245 2200 115 25 8 710
tle Scrapers
regulationfront and rear
d Protective engine covering PRE 620 29 010 050219 Sa02
d rear 52device
Single point lifting
Technical Data BOMAG
covering
Safety control Technical Data
BOMAG BW 71 E-2
device
Back-up drive protection
Dimensions inDimensions
mm in mm
protection
on
teering
dampened
rod steering rod B C1 C2 BD C1 H C2 L DO1 HO2 L S O1 W O2 S W
ring
adjustable
rod steeringBW 71rodE-2 BW 71825E-2190 450 825 600 190 1245450 2200600 115 1245
25 2200
8 115
710 25 8 710
on
egulation
and throttle regulation
steering rod
arrs front and rear
ering
ive engine covering
ice
point lifting device
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
control BW 71 E-2 BW 71 E-2
on
p drive protection
drtrear
bars front andWeights
rear Weights
Warranty Operating weight CECE ...........................................
Operating kg 488
weight CECE ........................................... kg 488
Basic weight ............................................................. kg 471
Basic weight ............................................................. kg 471
Equipment Static
Static linear load CECE linear
........................................... kg/cm 7,0
load CECE ........................................... kg/cm 7,0
Dimensions Dimensions
rtg wheel+Parking
brake brake width ..........................................................
Working mm 710
Working width .......................................................... mm 710
t
l painting Driving Characteristics
Driving Characteristics
e Kit Speed (1), forward
Speed...................................................
(1), forward ...................................................
km/h 0- 1,6 km/h 0- 1,6
nmentally
liant Speed (1), reverse
compliant Speed...................................................
(1), reverse ...................................................
km/h 0- 1,6 km/h 0- 1,6
3lic oil Speed (2), forward
Speed...................................................
(2), forward ...................................................
km/h 0- 2,5 km/h 0- 2,5
H WARRANTY Speed (2), reverse
Speed...................................................
(2), reverse ...................................................
km/h 0- 2,5 km/h 0- 2,5
0,136 Max. gradeability without/with
Max. gradeability vibr. ..........................
without/with % 25/20
vibr. .......................... % 25/20
0,167 Drive Drive
Engine manufacturer Engine................................................ Hatz
manufacturer ................................................ Hatz
Type ......................................................................... 1B 20
Type ......................................................................... 1B 20
Emission stageEmission ......................................................... Stage V
stage ......................................................... Stage V
Cooling ..................................................................... air
Cooling ..................................................................... air
Number of cylinders Number ................................................. 1
of cylinders ................................................. 1
Performance ISO 3046 ............................................
Performance ISO 3046 ............................................
kW 3,4 kW 3,4
ng bow, Speed ....................................................................... min-1 3.200 min-1
Speed ....................................................................... 3.200
Fuel .......................................................................... Diesel
Fuel .......................................................................... Diesel
Starting device Starting
......................................................... El.-starter
device ......................................................... El.-starter
dle
Dimensions in mm
Drive system ............................................................
Drive hydrost.
system ............................................................ hydrost.
e plate Fuel comsump.Fuel aver.comsump.
during operation
aver. during....................
operationl/h 0,8
.................... l/h 0,8
w oil H H1 H2 L L1 W
Exciter systemExciter system
BP 10/35
Drive 658 ............................................................
962 700 1084 532 350
system ............................................................
Drive system mech. mech.
Frequency ................................................................ 75
Frequency ................................................................
Hz Hz 75
BP 12/40 .................................................................
Amplitude Amplitude 658 962 700 1084 542 mm 400 0,43 mm
................................................................. 0,43
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 16 kN 16
Sprinkler System
Sprinkler System
Technical Data
Type of sprinkling .....................................................
Type gravity
of sprinkling .....................................................
BOMAG
gravity
BOMAG
Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 5,1 l BP
5,1 10/35 BP 12/40
Water .......................................................................
Water .......................................................................
l 25,0 l 25,0
Weights
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG BOMAG air air
Number of cylinders .................................................
Hellerwald
D-56154 Boppard
Hellerwald
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 kW 2,6 2,6
Speed .......................................................................
Tel. (0)6742 - 1000Tel. (0)6742 - 1000 min-1 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
9 010
Fuel comsump.
050219 Sa02 050219 Sa02
aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
53
Shipping dimensions in m3
BW 65 H 1,609
BW 75 H 2,769
BW 65 H, BW 75 H
Mechanical vibration drive
Dimensions in mm
Electric starter
Infinitely variable speed control A
Sprinkler system BW 65 H 5
Vibration dampened steering rod BW 75 H 6
Height adjustable steering rod
Vibration and throttle regulation
on the steering rod
Technical Data
2 scrapers per drum
Automatic shutdown at low oil
level (BW65H)
Single point lifting device Weights
Safety crank handle (BW65H) Operating weight C
* Safety control Basic weight ..........
* Back-up drive protection Average axle load C
* Parking brake Average static linea
3-2-1 Warranty Dimensions
Overall length, min.
Optional Equipment
Driving Characteri
Parking brake Speed (1), forward
Tool kit Speed (1), reverse
Special painting Max. gradeability w
Service Kit Drive
US Version EPA 4 NRTC Engine manufacture
(BW65H) Type ......................
TOUGH WARRANTY Emission stage ......
Cooling ..................
Number of cylinders
* Standard delivery with CE Performance ISO 3
conformity (valid within Speed ....................
European Union) Fuel .......................
(+5kg) Drive system .........
Driven drum ...........
Fuel comsump. ave
Fields of application: Brakes
Earthwork and asphalt applications. Service brake ........
Parking brake ........
New construction and repairs of sidewalks, hard Exciter system
shoulders, cycle paths, yards and drive ways, Vibrating drum .......
Drive system .........
children playgrounds, tennis and sports grounds as Frequency .............
Amplitude ..............
well as agricultural and forestry road construction. Centrifugal force ....
Sprinkler System
Type of sprinkling ..
PRE 834 09 010
Capacities
Fuel .......................
Water .....................
Technical modifications reserve
ing dimensions in m3
5 H in m3
ions 1,609
5H 1,609 2,769
2,769
ard Equipment
ent
drostatic drive
uble vibration
e
echanical vibration drive B
n Dimensions in mm H
ectric starter
ration drive
nitely variable speed control A B C D H H1 K L L1 O S W D
Dimensions in mm P
rinkler system BW 65 H
e speed control A B C550 D762 H200 H1
400 K960 L1210L1
110 O2200S2320W20 8 650
T
bration dampened steering rod
m BW 75 H 620 400
865 960
250 1210
500 110
11002200
11592320
128 2029108 3010650
20 10 750 F
ight adjustable steeringBW rod65 H 550 762 200
ened steering
bration rod regulation
and throttle BW 75 H 620 865 250 500 1100 1159 128 2910 3010 20 10 750
ble PRE 834 09 010 050219 Sa02
thesteering
steeringrodrod
per drum 54
hrottle regulation Technical Data BOMAG BOMAG
crapers
rod
tomatic shutdown at low oil
Technical Data BOMAG BW 65BOMAG
H BW 75 H
drum
el (BW65H)
Dimensions inDimensions mm Dimensions
in mm in mm
c starter
Electric starter
dy variable
control
Infinitely
speed
variable speed controlA
control B C AD BH A CH1 B DK C HL D H1L1 H KO H1 LS K L1W L O L1
S O
W S W
er system
Sprinkler system
BW 65 H BW 65 550H 762 BW 65 200H 550 400 762 960 550200
1210762400
110 200960
22004001210
2320960110
20 12102200
8 1102320
650 2200
20 2320
8 20
650 8 650
on
teering
dampened
Vibration
rod dampened
steering
BW 75 H
rodsteering rod
BW 75 620H 865 BW 75 250H 620 500 865 1100620250
1159865500
128 2501100
29105001159
30101100
128
20 11592910
10 128
3010
750 2910
20 3010
10 20
750 10 750
ring
adjustable
Height
rod steering
adjustable rodsteering rod
onegulation
and
Vibration
throttleand
regulation
throttle regulation
steering
on the
pers 2per scrapers
drum per drum
TECHNICAL DATA
rodsteering rod
Technical DataTechnical Technical Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
atic
t lowshutdown
Automatic
oil at
shutdown
low oil at low oil BW 65 H BW BW H 65 HBW 75 H BW 75 H
65 H75 BW
BW65H) level (BW65H)
ice
pointSingle
lifting point
devicelifting device Weights Weights
Weights
BW65H)
crankSafety
handlecrankOperating
(BW65H) weight
handle (BW65H) Operating weight
Operating CECE kg 757
...........................................
weight CECE ...........................................
CECE ........................................... kg 757kg1.040 757 1.040 1.040
y control
* Safety control Basic weight kg 727
.............................................................
Basic weight .............................................................
Basic weight ............................................................. kg 727kg1.010 727 1.010 1.010
-up
tiondrive
* Back-up Average
protection
drive axle load
protection Average
CECEaxle load CECE
Average axle load kg 379
.........................................
CECE .........................................
......................................... kg 379kg520 379 520 520
ng brake
* Parking brakeAverage static Average
linear load static
Average
CECE linear load
static CECE
linear load
.............................. kg/cm 5,8
..............................
CECE kg/cm 5,8
.............................. 6,9
kg/cm 5,8 6,9 6,9
Warranty
3-2-1 Warranty Dimensions Dimensions Dimensions
Overall length, min. Overall ..................................................
length,
Overallmin.length, mm 1.230 mm
..................................................
min. ..................................................1.2301.360 1.230 1.360
mm 1.360
Equipment
Optional Equipment
Driving CharacteristicsDriving Characteristics
Driving Characteristics
g brakeParking brake Speed (1), forward Speed ...................................................
(1), Speed
forward(1), km/h 0- 5,5 km/h 0- 5,5
...................................................
forward ................................................... 0- 5,0 0- 5,5 0- 5,0
km/h 0- 5,0
3t Tool kit Speed (1), reverse Speed ...................................................
(1), Speed
reverse(1), km/h 0- 2,5 km/h 0- 2,5
...................................................
reverse ................................................... 0- 2,5 0- 2,5 0- 2,5
km/h 0- 2,5
l painting Max.
Special painting gradeability Max.without/with
gradeability
Max. vibr. ..........................
without/with
gradeability vibr. ..........................
without/with % vibr. 40/35 %
.......................... %
40/3540/35 40/35 40/35 40/35
0,136
e Kit Service Kit Drive Drive Drive
rsion
TC US EPA0,167
Version
4 NRTC EPA 4 manufacturer
Engine NRTC Engine................................................
manufacturer
Engine manufacturer ................................................
H) (BW65H) Type .........................................................................
HatzYanmarHatz
................................................
Hatz Yanmar Yanmar
Type .........................................................................
Type .........................................................................
1D 42 1D 42L100 1D 42 L100 L100
H WARRANTY
TOUGH WARRANTY Emission stageEmission .........................................................
stage
Emission .........................................................
stage .........................................................
Stage V StagenonV EPAStage V non EPA non EPA
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
air air air air air air
Number of cylinders Number .................................................
of Number
cylindersof.................................................
cylinders .................................................
1 1 1 1 1 1
dard
th CE *delivery
Standard Performance
with
delivery
CE with CE ISO 3046 ............................................
Performance ISO 3046 ............................................
Performance kW 6,2 kW
ISO 3046 ............................................ 6,2kW6,2 6,2 6,2 6,2
mity
n conformity Speedwithin
(valid within(valid ....................................................................... min-1 2.800 min-1 2.800
Speed .......................................................................
Speed ....................................................................... 3.100 2.800 3.100
min-1 3.100
ng
ean bow,
Union)
European Union)Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel Diesel Diesel
Diesel Diesel
(+5kg) Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Driven drum .............................................................
Driven drum .............................................................
Driven drum .............................................................
front + rear frontfront + front
+ rearrear + rear
front + rearfront + rear
dle
Dimensions
Fuel comsump.Fuel in mm
aver. during
comsump. Fueloperation
aver. during
comsump. ....................
operation
aver. during ....................
l/h operation l/h
1,3 .................... 1,5
1,3l/h 1,3 1,5 1,5
e plate
Brakes Brakes H Brakes H1 H2 L L1 W
w oil Service brake ...........................................................
Service brake hydrost.
...........................................................
Service brake ........................................................... hydrost.hydrost. hydrost.
hydrost. hydrost.
BP 10/35
Parking brake 658 962brake 700...........................................................
1084 532 350
...........................................................
Parking brake mech.
...........................................................
Parking mech.mech. mech. mech. mech.
BP 12/40
Exciter 658
systemExciter system962system
Exciter 700 1084 542 400
Vibrating drum Vibrating
..........................................................
drum ..........................................................
Vibrating front + rear
drum ..........................................................frontfront + front
+ rearrear + rear
front + rearfront + rear
Drive system ............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech.mech. mech. mech. mech.
Frequency ................................................................
Frequency Frequency ................................................................
................................................................
Hz 55 Hz 55 Hz55 55 55 55
Technical Data
Amplitude ................................................................. 0,45 mm BOMAG
Amplitude .................................................................
Amplitude .................................................................
mm 0,45 0,50 0,45
mm 0,50BOMAG 0,50
Centrifugal force .......................................................
Centrifugal Centrifugal
force ....................................................... kN
force .......................................................
kN 22 22 kN40 22 40 40
Sprinkler SystemSprinkler SystemSprinkler System
BP 10/35 BP 12/40
Type of sprinkling .....................................................
Type of sprinkling gravity
Type of..................................................... gravity gravity gravity
gravity
sprinkling ..................................................... gravity
Weights
Operating
Capacities weight Capacities CECE ........................................... kg
Capacities 65 72
Basic weightFuel .............................................................
Fuel ..........................................................................
Water .......................................................................
Water 60,0 kgl
..........................................................................
l 5,0
.......................................................................
l
l
64
5,0l 5,5
Fuel ..........................................................................
60,0
Water .......................................................................
5,0
l 60,0 60,0 60,071
5,5 5,5
60,0
Dimensions
Technical modifications reserved.
TechnicalMachines
modifications
Technical
mayreserved.
be modifications
shownMachines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
55
Shipping dimensions in m3
BMP 8500 2,056
BMP 8500
ECOMODE
Drum extensions (610/850mm)
Hydrostatic articulated steering,
Dimensions in mm
maintenance free
Combination remote control A
cable/radio BMP 8500 1
Dual directed-vibration system
Two travel speed ranges
2 amplitudes
Intelligent Vibration Control
Technical Data
(IVC)
Electric starter
BOMAG Operator Safety
System Weights
2 scrapers per drum Operating weight C
Battery disconnect switch Basic weight ..........
Automatic shutdown at low oil Average axle load C
level Driving Characteri
Automatic engine shut down at a Speed (1), forward
lateral tipping angle of 45° Speed (1), reverse
Full prot. hoods made of impact Speed (2), forward
resistant compound material Speed (2), reverse
Single point lifting device Max. gradeability w
Lockable engine cover and dash
board Drive
Easy Service Concept Engine manufacture
-Diagnostic module with fault Type ......................
Emission stage ......
code display Cooling ..................
-Hour meter Number of cylinders
-foldable full protection hood Performance ISO 3
3-2-1 Warranty Speed ....................
Fuel .......................
Optional Equipment Drive system .........
Environmentally compliant Driven drum ...........
hydraulic oil Fuel comsump. ave
Smooth drum (-45kg Amplitude
1,59/0,86mm) Brakes
Fields of application: Special painting Service brake ........
Parking brake ........
Mobile quick charger
Earthwork. Scrapers 610/850mm Exciter system
Trench and sewer line construction, backfills and Service Kit
ECONOMIZER
Vibrating drum .......
Drive system .........
foundation work – wherever high demands are TOUGH WARRANTY Frequency .............
Amplitude ..............
placed on mobility, manoeuvrability and simple Centrifugal force ....
operation under severe soil conditions. Capacities
Fuel .......................
Technical modifications reserve
Shipping dimensions in m3
BMP
ensions in 8500
m3 2,056
2,056
Standard Equipment
uipment
ECOMODE
Drum extensions (610/850mm)
E Hydrostatic articulated steering, B
nsions (610/850mm) Dimensions in mm H
maintenance free
articulated steering, remote control
Combination A D H K L S W W1 D
Dimensions in mm P
ce free cable/radio
n remoteDual
control ABMP D
8500 H K 1000
L 520S 1275
W 197W11897 16 850 610
T
directed-vibration system
F
Two travel speed BMP 8500
ranges 1000 520 1275 197 1897 16 850 610
ed-vibration system
2 amplitudes
speed ranges PRE 720 12 010 120918 Sa03
Intelligent Vibration Control
es (IVC) 56 Technical Data BOMAG
Vibration Control
Electric starter Technical Data
BOMAG BMP 8500
BOMAG Operator Safety
Dimensions inDimensions
mm in mm
nance free
nation
ontrol remote control A D H AK DL HS KW L W1 S W W1
adio BMP 8500 BMP10008500 520 12751000 197 520 18971275 16 197 850 1897 610 16 850 610
nrected-vibration
system system
avel
es speed ranges
itudes
ontrol
ent Vibration Control
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
c starter BMP 8500 BMP 8500
G
etyOperator Safety
m Weights Weights
pers per drum Operating weight CECE ...........................................
Operating kg
weight CECE ...........................................1.595 kg 1.595
itch Basic weight .............................................................
disconnect switch kg 1.585 kg
Basic weight ............................................................. 1.585
atic
t lowshutdown
oil Average
at low oil axle Average
load CECE axle load CECE
......................................... kg 798
......................................... kg 798
Driving Characteristics
Driving Characteristics
atic
downengine
at a shutSpeed
down at (1),a forwardSpeed ...................................................
(1), forward ...................................................
km/h 1,2 km/h 1,2
tipping
45° angle of Speed45° (1), reverse Speed ...................................................
(1), reverse ...................................................
km/h 1,2 km/h 1,2
ot.of hoods
impactmade Speed
of impact(2), forward Speed ...................................................
(2), forward ...................................................
km/h 2,8 km/h 2,8
nt
aterial
compound material
Speed (2), reverse Speed ...................................................
(2), reverse ...................................................
km/h 2,8 km/h 2,8
ice
point lifting device
Max. gradeability Max.without/with
gradeability vibr. ..........................
without/with 55/45 %
vibr. ..........................
% 55/45
3r and
ble engine
dashcover and dash
Drive Drive
0,136 Engine manufacturer
ervice Concept Engine................................................ Kubota
manufacturer ................................................ Kubota
Type
fault......................................................................... D 1005
Type ......................................................................... D 1005
ostic
th fault
isplay
0,167 Emission stageEmission
module with
......................................................... Stage V / TIER4f
stage ......................................................... Stage V / TIER4f
Cooling ..................................................................... water
Cooling ..................................................................... water
meter Number of cylinders Number 3
of cylinders .................................................
................................................. 3
nlehood
full protectionPerformance
hood Performance
ISO 14,5 kW
ISO 3046 ............................................
3046 ............................................ kW 14,5
Warranty min-1 2.600 min-1 2.600
Speed .......................................................................
Speed .......................................................................
Diesel
Fuel ..........................................................................
Fuel .......................................................................... Diesel
Equipment Drive system ............................................................ hydrost.
Drive system ............................................................ hydrost.
ng bow, compliant
nmentally
liant 4
Driven drum .............................................................
Driven drum ............................................................. 4
lic oil Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... 3,1
.................... l/h 3,1
dle
Amplitude
h drum (-45kg Amplitude
86mm) Dimensions
Brakes
in mm
Brakes
el painting
plate Service brake ........................................................... hydrost.
Service brake ........................................................... hydrost.
wquick H ...........................................................
H1 H2 L
oil charger Parking brake ...........................................................
Parking brake L1 Whydromec. hydromec.
rs 610/850mm BP 10/35
Exciter system Exciter 658 962 700 1084 532 350
system
e Kit Vibrating drum Vibrating
.......................................................... front + rear
drum .......................................................... front + rear
OMIZER BP 12/40
Drive 658 ............................................................
962 700 1084 542 400
system ............................................................
Drive system hydraulic hydraulic
H WARRANTY Frequency ................................................................
Frequency ................................................................
Hz 42/42 Hz 42/42
Amplitude .................................................................
Amplitude .................................................................
mm 1,12/0,56 mm 1,12/0,56
Centrifugal force .......................................................
Centrifugal kN 72/36 kN
force ....................................................... 72/36
Technical Data BOMAG BOMAG
Capacities Capacities
Fuel .......................................................................... l 24,0 l
Fuel .......................................................................... BP
24,010/35 BP 12/40
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG
Hellerwald
BOMAG
Hellerwald
air air
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard 1 1
Performance SAE J 1349 ........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Speed .......................................................................
Tel. (0)6742 - 1000 Tel. (0)6742 - 1000 min-1 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
0,9
2 010 120918 Sa03 120918 Sa03
Fuel comsump. aver. during operation .................... l/h 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
57
Shipping dimensions in m3
BMP 8500 2,056
BMP 8500
ECOMODE
Drum extensions (610/850mm)
Hydrostatic articulated steering,
Dimensions in mm
maintenance free
Combination remote control A
cable/radio BMP 8500 1
Dual directed-vibration system
Two travel speed ranges
2 amplitudes
Intelligent Vibration Control
Technical Data
(IVC)
Electric starter
BOMAG Operator Safety
System Weights
2 scrapers per drum Operating weight C
Battery disconnect switch Basic weight ..........
Automatic shutdown at low oil Average axle load C
level Driving Characteri
Automatic engine shut down at a Speed (1), forward
lateral tipping angle of 45° Speed (1), reverse
Full prot. hoods made of impact Speed (2), forward
resistant compound material Speed (2), reverse
Single point lifting device Max. gradeability w
Lockable engine cover and dash
board Drive
Easy Service Concept Engine manufacture
-Diagnostic module with fault Type ......................
Emission stage ......
code display Cooling ..................
-Hour meter Number of cylinders
-foldable full protection hood Performance ISO 3
3-2-1 Warranty Speed ....................
Fuel .......................
Optional Equipment Drive system .........
Environmentally compliant Driven drum ...........
hydraulic oil Fuel comsump. ave
Smooth drum (-45kg Amplitude
1,59/0,86mm) Brakes
Fields of application: Special painting Service brake ........
Parking brake ........
Mobile quick charger
Earthwork. Scrapers 610/850mm Exciter system
Trench and sewer line construction, backfills and Service Kit
ECONOMIZER
Vibrating drum .......
Drive system .........
foundation work – wherever high demands are TOUGH WARRANTY Frequency .............
Amplitude ..............
placed on mobility, manoeuvrability and simple Centrifugal force ....
operation under severe soil conditions. Capacities
Fuel .......................
Technical modifications reserve
Shipping dimensions in m3
BMP
ensions in 8500
m3 2,056
2,056
Standard Equipment
uipment
ECOMODE
Drum extensions (610/850mm)
E Hydrostatic articulated steering, B
nsions (610/850mm) Dimensions in mm H
maintenance free
articulated steering, remote control
Combination A D H K L S W W1 D
Dimensions in mm P
ce free cable/radio
n remoteDual
control ABMP D
8500 H K 1000
L 520S 1275
W 197W11897 16 850 610
T
directed-vibration system
F
Two travel speed BMP 8500
ranges 1000 520 1275 197 1897 16 850 610
ed-vibration system
2 amplitudes
speed ranges PRE 720 14 010 120918 Sa
Intelligent Vibration Control
es (IVC) 58 Technical Data BOMAG
Vibration Control
Electric starter Technical Data
BOMAG BMP 8500
BOMAG Operator Safety
Dimensions inDimensions
mm in mm
nance free
nation
ontrol remote control A D H AK DL HS KW L W1 S W W1
adio BMP 8500 BMP10008500 520 12751000 197 520 18971275 16 197 850 1897 610 16 850 610
nrected-vibration
system system
avel
es speed ranges
itudes
ontrol
ent Vibration Control
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
c starter BMP 8500 BMP 8500
G
etyOperator Safety
m Weights Weights
pers per drum Operating weight CECE ...........................................
Operating kg
weight CECE ...........................................1.595 kg 1.595
itch Basic weight .............................................................
disconnect switch kg 1.585 kg
Basic weight ............................................................. 1.585
atic
t lowshutdown
oil Average
at low oil axle Average
load CECE axle load CECE
......................................... kg 798
......................................... kg 798
Driving Characteristics
Driving Characteristics
atic
downengine
at a shutSpeed
down at (1),a forwardSpeed ...................................................
(1), forward ...................................................
km/h 1,2 km/h 1,2
tipping
45° angle of Speed45° (1), reverse Speed ...................................................
(1), reverse ...................................................
km/h 1,2 km/h 1,2
ot.of hoods
impactmade Speed
of impact(2), forward Speed ...................................................
(2), forward ...................................................
km/h 2,8 km/h 2,8
nt
aterial
compound material
Speed (2), reverse Speed ...................................................
(2), reverse ...................................................
km/h 2,8 km/h 2,8
ice
point lifting device
Max. gradeability Max.without/with
gradeability vibr. ..........................
without/with 55/45 %
vibr. ..........................
% 55/45
3r and
ble engine
dashcover and dash
Drive Drive
0,136 Engine manufacturer
ervice Concept Engine................................................ Kohler
manufacturer ................................................ Kohler
Type
fault......................................................................... KDW 1003
Type ......................................................................... KDW 1003
ostic
th fault
isplay
0,167 Emission stageEmission
module with
......................................................... Stage V / TIER4f
stage ......................................................... Stage V / TIER4f
Cooling ..................................................................... water
Cooling ..................................................................... water
meter Number of cylinders Number 3
of cylinders .................................................
................................................. 3
nlehood
full protectionPerformance
hood Performance
ISO 12,8 kW
ISO 3046 ............................................
3046 ............................................ kW 12,8
Warranty min-1 2.600 min-1 2.600
Speed .......................................................................
Speed .......................................................................
Diesel
Fuel ..........................................................................
Fuel .......................................................................... Diesel
Equipment Drive system ............................................................ hydrost.
Drive system ............................................................ hydrost.
ng bow, compliant
nmentally
liant 4
Driven drum .............................................................
Driven drum ............................................................. 4
lic oil Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... 3,2
.................... l/h 3,2
dle
Amplitude
h drum (-45kg Amplitude
86mm) Dimensions
Brakes
in mm
Brakes
el painting
plate Service brake ........................................................... hydrost.
Service brake ........................................................... hydrost.
wquick H ...........................................................
H1 H2 L
oil charger Parking brake ...........................................................
Parking brake L1 Whydromec. hydromec.
rs 610/850mm BP 10/35
Exciter system Exciter 658 962 700 1084 532 350
system
e Kit Vibrating drum Vibrating
.......................................................... front + rear
drum .......................................................... front + rear
OMIZER BP 12/40
Drive 658 ............................................................
962 700 1084 542 400
system ............................................................
Drive system hydraulic hydraulic
H WARRANTY Frequency ................................................................
Frequency ................................................................
Hz 42/42 Hz 42/42
Amplitude .................................................................
Amplitude .................................................................
mm 1,12/0,56 mm 1,12/0,56
Centrifugal force .......................................................
Centrifugal kN 72/36 kN
force ....................................................... 72/36
Technical Data BOMAG BOMAG
Capacities Capacities
Fuel .......................................................................... l 24,0 l
Fuel .......................................................................... BP
24,010/35 BP 12/40
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling .....................................................................
BOMAG
Hellerwald
BOMAG
Hellerwald
air air
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard 1 1
Performance SAE J 1349 ........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Speed .......................................................................
Tel. (0)6742 - 1000 Tel. (0)6742 - 1000 min-1 3.600 3.600
Drive system ............................................................
Fax (0)6742 - 3090 Fax (0)6742 - 3090 mech. mech.
Fuel .......................................................................... Gasoline Gasoline
0,9
4 010 120918 Sa 120918 Sa
Fuel comsump. aver. during operation .................... l/h 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
59
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
RO
60
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAGBOMAGBOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG BOMAG BOMAGBOMAG
BW 80 AD-5 BW 90BW
AD-5
80BW
AD-5
80BWAD-5
BW
80 AD-5
100
BW ADM-5
90BW
AD-5
90BWAD-5
90 AD-5
BW 100
BWADM-5
100
BWADM-5
100 ADM-5
Weights Weights
Weights
Weights
Operating weight CECE ....................Operating Operating
kgweightOperating
CECE
weight
1.550 ....................
CECE
weight.................... kg 1.600
CECE .................... kg 1.550
kg 1.550 1.5501.700 1.600 1.600 1.600 1.700 1.700 1.700
Average static linear load CECE .......AverageAverage kg/cm
static linear
Average
static
load
9,7 linear
static
CECE loadlinear
.......
CECE load.......
CECEkg/cm 8,9 kg/cm
....... 9,7
9,7 kg/cm 9,7 8,5 8,9 8,9 8,9 8,5 8,5 8,5
Grossweight ......................................Grossweight
Grossweight
kg ......................................
Grossweight
......................................
1.900 kg 1.900
...................................... kg 1.900
kg 1.900 1.9001.900 1.900 1.900 1.900 1.900 1.900 1.900
Dimensions Dimensions
Dimensions
Dimensions
Working width ....................................WorkingWorking
mm
width ....................................
Working
width 800....................................
width ....................................
mm 900mm 800mm 800 800 1.000 900 900 900 1.000 1.000 1.000
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
2.080
inner
radius,............................
inner ............................
mm 2.030 mm 2.080
mm 2.080 2.0801.980 2.030 2.030 2.030 1.980 1.980 1.980
Driving Characteristics Driving
Driving
Characteristics
Driving
Characteristics
Characteristics
Speed ................................................Speed ................................................
Speed
km/h ................................................
Speed 0- 10,0 km/h0- 10,0
................................................ 0- 10,0 0- 10,0 0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0 0- 10,0 0- 10,0
Working speed with vibration ............WorkingWorking km/h
speed with Working
speed0-
vibration
10,0
with
speedvibration
............
with vibration
............km/h 0- 10,0
............ 0- 10,0 0- 10,0 0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0 0- 10,0 0- 10,0
3 Max. gradeability without/with vibr. ...Max. gradeability Max.
% gradeability
Max.
without/with
40/30
gradeability
without/with ... vibr. ...%vibr.40/30
vibr.without/with ...% 40/30 % 40/30 40/3040/30 40/30 40/30 40/30 40/30 40/30 40/30
0,136 Drive Drive Drive Drive
Engine manufacturer .........................Engine manufacturerEngine manufacturer
Engine .........................
Kubotamanufacturer
......................... Kubota Kubota
......................... Kubota Kubota Kubota Kubota Kubota Kubota Kubota Kubota Kubota
0,167 Type ..................................................Type ..................................................
Type ..................................................
Type D 902 D 902
D ..................................................
902 D 902 D 902 D 902 D 902 D 902 D 902 D 902 D 902 D 902
Emission stage ..................................EmissionEmission
stage ..................................
Emission
stage
Stage ..................................
stage
V / TIER4f Stage VStage
.................................. V Stage
/ TIER4f V Stage
/ TIER4f Stage
/ TIER4f VStage
/ TIER4f
V / TIER4f V Stage V Stage
/ TIER4f V / TIER4f
/ TIER4f Stage V Stage
/ TIER4f
V Stage
/ TIER4f
V / TIER4f
Cooling ..............................................Cooling Cooling
..............................................
Cooling
.............................................. water water water waterwater water water water
water.............................................. water water water
Number of cylinders ..........................Number Number of cylindersNumber
of cylinders
..........................
3 of cylinders.......................... 3
.......................... 3 3 3 3 3 3 3 3 3 3
Performance ISO 14396 ...................Performance Performance
kW ISOPerformance
14396 ISO...................
15,1 14396 ISO................... kW 15,1kW 15,1kW 15,1
14396 ................... 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1
Performance SAE J 1995 ..................Performance Performance
hp SAE Performance
J 1995
SAE..................
20,2 J 1995SAE.................. hp 20,2hp 20,2hp 20,2
J 1995 .................. 20,2 20,2 20,2 20,2 20,2 20,2 20,2 20,2
ng bow, Speed ................................................Speed ................................................
Speed
min-1 ................................................
Speed 3.000 min-13.000
................................................min-1 min-1
3.000 3.000 3.0003.000 3.000 3.000 3.000 3.000 3.000 3.000
Speed adjustment 1 ..........................Speed adjustment Speed
min-1 adjustment
Speed
1 ..........................
2.100adjustment
1 .......................... min-12.100
1 ..........................min-1 min-1
2.100 2.100 2.1002.100 2.100 2.100 2.100 2.100 2.100 2.100
dle Speed adjustment 2 ..........................Speed adjustment Speed
min-1 adjustment
Speed
2 ..........................
3.000adjustment
2 .......................... min-13.000
2 ..........................min-1 min-1
3.000 3.000 3.0003.000 3.000 3.000 3.000 3.000 3.000 3.000
Dimensions in mm
Electric equipment ............................. Electric equipment
Electric
V equipment
Electric
.............................
12 equipment
.............................V 12 V 12 V 12
............................. 12 12 12 12 12 12 12 12
e plate Driven drum .......................................Driven drumDriven .......................................
drum
Driven .......................................
front drum
+ rear front + rear
....................................... front + rear front front
front + rear + rear
+ rear front + rear front + rear front + rear
front + rear front + rear
front + rear
w oil H H1 H2 L L1 W
Brakes BrakesBrakesBrakes
BP 10/35
Service 658 Service
brake .................................... 962 brake
700....................................
Service 1084
brake
Service
hydrost. 532....................................
350
....................................
brake hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
BP 12/40 658 962 brake 700....................................
Parking brake ....................................Parking Parking
1084
Parking
brakehydromec.
542 400
....................................
brake ....................................
hydromec.
hydromec.
hydromec.
hydromec.
hydromec.
hydromec.
hydromec.
hydromec. hydromec.hydromec.hydromec.
Steering Steering
Steering
Steering
Steering system ................................SteeringSteering
system Steering
................................
system
oscil.artic.
................................ oscil.artic.
system ................................ oscil.artic.
oscil.artic. oscil.artic.
oscil.artic. oscil.artic. oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Steering method ................................SteeringSteering
methodSteering
................................
method
hydrost. ................................ hydrost.hydrost. hydrost. hydrost.
method ................................ hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Technical Data
Steering / oscillating angle +/- ...........SteeringSteering
/ oscillating
grad Steering
/ oscillating
angle
33/8 / oscillating
+/-angle
...........
+/-angle
...........
+/-
grad BOMAG
33/8grad
........... 33/8grad 33/8 33/8 33/8 BOMAG 33/8
33/8 33/8 33/8 33/8 33/8
Crab walk ..........................................Crab walk
Crab
..........................................
walkCrab ..........................................
0-walk 0- 50 0- 50 0- 50 0- 500- 50 0- 50 0- 50 0- 50
50 .......................................... 0- 50 0- 50 0- 50
BP 10/35 BP 12/40
Exciter system ExciterExciter
system
Exciter
systemsystem
Vibrating drum ...................................VibratingVibrating +drum
drum ...................................
Vibrating
drumfront ................................... front + rear
rear ................................... front + rear front front
front + rear + rear
+ rear front + rear front + rear
front + rear front + rear
front + rear
front + rear
Weights
Drive system .....................................Drive system
Drive .....................................
system
Drive hydrost.
.....................................
system ..................................... hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Operating weight CECEFrequency
Frequency ......................................... ...........................................
Frequency
Hz .........................................
Frequency kg
.........................................Hz 42/63
42/63 ......................................... Hz 65 Hz 42/63 42/6342/63 72
42/63 42/63 42/63 42/63 42/63 42/63 42/63
Basic
Amplitudeweight .............................................................
..........................................
AmplitudeAmplitude
mm kg
mm 0,50mm64
0,50 ..........................................
..........................................
Amplitude
.......................................... 0,50mm 0,50 0,50 0,40 71 0,50 0,50 0,50 0,40 0,40 0,40
Centrifugal force ................................CentrifugalCentrifugal
kN forceCentrifugal7/17 ................................
................................
force kN 8/17kN 7/17kN 7/17
force ................................ 7/17 8/17 8/17 8/17 8/17 8/17 8/17 8/17
Dimensions
Sprinkler System Sprinkler
Sprinkler
System
Sprinkler
System System
Working width
Type of sprinkling ..........................................................
..............................
Type of sprinkling
Type of sprinkling
Type
..............................
pressure
of sprinkling mmpressure350
..............................
.............................. pressurepressurepressure 400 pressurepressure
pressurepressure pressurepressurepressure
Capacities Capacities
Capacities
Capacities
Driving CharacteristicsFuel ...................................................
Fuel ................................................... Fuel
l ...................................................
Fuel 30,0
...................................................
l 30,0l 30,0l 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0
Working speed, max. ...............................................
Water .................................................Water .................................................
Water
l m/min
.................................................
Water 100,0
.................................................
l 100,0l 25 100,0 l 100,0 100,0100,0 25
100,0 100,0 100,0 100,0 100,0 100,0
Max. gradeability
Technical modifications reserved. Machines(dep. on
may be shown soil
Technical
with options. con.)
modifications
Technical ........................
modifications
reserved.
Technical
Machines
modifications
reserved.
mayMachines
be
reserved.
shownmay
with
Machines %
beoptions.
shownmaywith shown with 30
beoptions. options. 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
61
Standard Equipment Opti
TANDEM ROLLERS
Side-clearance roller (drum offset 60-100 RO
mm) *F
62
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 90 SC-5 BWBW
90 100
BW
SC-5SC-5
90 SC-5 BW 100BW 100 SC-5
SC-5
Weights Weights
Weights
Operating weight CECE Operating
...........................................
Operating
weight CECE weight kg...........................................
...........................................
CECE 1.650 kg kg 1.650
1.7001.650 1.700 1.700
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE kg/cm
load..............................
CECE ..............................
9,2 kg/cm 9,2 8,5 9,2
kg/cm 8,5 8,5
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
1.900 kg kg 1.900
1.9001.900 1.900 1.900
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 960 mm mm9601.060960 1.060 1.060
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.000 mm mm2.000
1.9502.000 1.950 1.950
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
speed
Working withspeed
vibration km/h ...................................
with vibration
...................................
0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
3 Max. gradeability without/with Max. gradeability
vibr.Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr. 40/30 %
.......................... % 40/3040/3040/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 902 D 902
D 902D 902 D 902 D 902
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage
Stage
V /Stage
TIER4f
V / TIER4f
V / TIER4f Stage V /Stage
TIER4fV / TIER4f
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 3
.................................................
................................................. 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 15,1 kW kW 15,115,1 15,1 15,1 15,1
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 20,2 hp hp 20,220,2 20,2 20,2 20,2
ng bow, Speed ....................................................................... min-1 3.000
Speed ....................................................................... min-1
Speed ....................................................................... 3.000
min-1 3.0003.000 3.000 3.000
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1 2.100
1 ................................................. min-1
1 ................................................. 2.100
min-1 2.1002.100 2.100 2.100
dle Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment min-1 3.000
2 ................................................. min-1
2 ................................................. 3.000
min-1 3.0003.000 3.000 3.000
Dimensions in mm
e plate
Electric equipment ...................................................
Electric equipment
Electric equipment V 12
................................................... V
................................................... V 12 12 12 12 12
H H1 H2 L L1 W
Driven drum .............................................................
Driven drum Driven front + rear
.............................................................
drum ............................................................. frontfront
+ rear
+front
rear+ rear front + rear
front + rear
w oil
Brakes BrakesBrakes
BP 10/35
Service Service658brake 962
Service 700
brake ........................................................... 1084 532hydrost. 350
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
BP 12/40 658Parking
Parking brake
962 700 1084 542hydromec.
Parking brake ...........................................................
400
...........................................................
brake ........................................................... hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Technical Data
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
33/8 grad BOMAG
grad33/833/8 33/8 BOMAG
33/8 33/8
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 0- 50 0- 50
0- 50 0- 50 0- 50
BP 10/35 BP 12/40
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating
drum ..........................................................
drum ..........................................................
front + rear frontfront
+ rear
+front
rear+ rear front + rear
front + rear
Weights
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost.
Operating weight CECE ...........................................
Frequency ................................................................
Frequency Frequency Hz
................................................................ kg
................................................................
42/63 Hz 65
Hz 42/6342/6342/63 72
42/63 42/63
Basic
Amplitudeweight .............................................................
.................................................................
AmplitudeAmplitude mm
................................................................. kg
.................................................................
0,50 mm mm64
0,500,50 0,50 71 0,50
0,50
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
8/19 kN kN 8/198/19 8/19 8/19 8/19
Dimensions
Sprinkler System Sprinkler Sprinkler
SystemSystem
Working width
Type of sprinkling ..........................................................
.....................................................
Type of sprinkling
Type of sprinkling
..................................................... mm
.....................................................
pressure 350
pressure
pressure
pressure 400 pressure
pressure
Driving
Capacities
Characteristics Capacities
Capacities
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 30,0 l l 30,030,0 30,0 30,0 30,0
Working speed, max. ...............................................
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 100,0 lm/minl 25100,0
100,0100,0 25
100,0 100,0
Max. gradeability
Technical modifications (dep.
reserved. Machines
Technical
may be on
modifications
shown
Technical soil Machines
withreserved. con.)
modifications
options. reserved. ........................
mayMachines
be shownmay
with be shown with options. %
options. 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
63
TANDEM ROLLER Standard Equipment Opt
64
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 900-50 BW 900-50
Weights Weights
Operating weight CECE ........................................... kg
Operating weight CECE ...........................................
1.200 kg 1.200
Average axle load CECE Average
......................................... kg
axle load CECE .........................................
599 kg 599
Average static linear loadAverage
CECE ..............................
static linear load CECE kg/cm
..............................
6,7 kg/cm 6,7
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 900 mm 900
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 1.647 mm 1.647
Driving Characteristics
Driving Characteristics
Working speed with vibration Working...................................
speed with vibration ...................................
km/h 0- 4,0 km/h 0- 4,0
Max. travel speed .....................................................
Max. travel speed .....................................................
km/h 0- 8,7 km/h 0- 8,7
3 Max. gradeability without/with
Max.vibr.gradeability
..........................
without/with vibr.
% ..........................
40/30 % 40/30
0,136 Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................
Honda Honda
0,167 Type .........................................................................
Type .........................................................................
GX 630 GX 630
Cooling .....................................................................
Cooling .....................................................................
air air
Number of cylinders .................................................
Number of cylinders .................................................
2 2
Performance SAE J 1349Performance ........................................ kW
SAE J 1349 ........................................
14,9 kW 14,9
Speed ....................................................................... min-1
Speed .......................................................................
3.300 min-1 3.300
Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
ng bow, Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Driven drum .............................................................
Driven drum .............................................................
2 2
dle Brakes Brakes
Dimensions in mm
e plate Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
w oil H H1 H2 L
Parking brake ...........................................................
L1 mech. W
Parking brake ........................................................... mech.
Steering Steering
BP 10/35 658 962 700 1084 532oscil.artic.
Steering system .......................................................
350
Steering system ....................................................... oscil.artic.
BP 12/40
Steering 658 method 962.......................................................
700 1084 542hydrost.
method .......................................................
Steering 400 hydrost.
Steering angle +/- .....................................................
Steering angle +/- .....................................................
grad 33 grad 33
Oscillating angle +/- .................................................
Oscillating angle +/- .................................................
grad 6 grad 6
Technical
Exciter system Data Exciter system
Vibrating drum .......................................................... front
Vibrating drum .......................................................... BOMAG
front BOMAG
BP70 10/35 BP 12/40
Drive system ............................................................ hydrost.
Drive system ............................................................ hydrost.
Frequency ................................................................ Hz 70
Frequency ................................................................ Hz
Amplitude ................................................................. mm 0,50
Amplitude ................................................................. mm 0,50
Weights
Centrifugal force ....................................................... kN 15
Centrifugal force ....................................................... kN 15
Operating
Sprinkler SystemweightSprinkler
CECE ...........................................
System kg 65 72
Basic weight.....................................................
Type of sprinkling .............................................................
Type of sprinkling .....................................................
pressure kg 64
pressure 71
Dimensions
Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 27,0 l 27,0
Working width ..........................................................
Water .......................................................................
Water ....................................................................... l 137,0 mm
l 350
137,0 400
Driving Characteristics
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved. Machines may be shown with options.
65
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Option
* Fold
Hydrostatic travel and vibration drive * Foldable ROPS incl. seat belt (valid
Earthwork and asphalt applications. Pressure sprinkler system with interval Sliding seat incl. double travel lever
switch ECONOMIZER with asphalt temperature
New construction and repair work forMulti medium and lever
function travel small display
scale construction projects, on parking Multi-function
lots, sidewalks,
display cycle
incl. operating hour Temperature display
66
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AD-5 BW
BW100
120
BWAD-5
AD-5
100 AD-5 BW 120BW
AD-5
120 AD-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS CECE 2.500 kg
........................... 2.700 2.500
kg 2.500 2.700 2.700
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE kg/cm
load..............................
CECE ..............................
12,5 kg/cm kg/cm 11,3 12,5
12,5 11,3 11,3
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
3.300 kg 3.500 3.300
kg 3.300 3.500 3.500
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working...................................
speed
Working withspeed
vibration km/h ...................................
with vibration
...................................
0- 10,0 km/h km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
3 Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr.40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Kubota KubotaKubota
Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703D 1703
D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmission
stage .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage IIIaStage
Stage IIIa IIIa / TIER4i Stage IIIaStage
/ TIER4i
/ TIER4i / TIER4i
IIIa / TIER4i
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 3
.................................................
................................................. 3 3 3 3 3
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ISO kW..........................................
24,3
..........................................
14396 kW kW 24,324,3 24,3 24,3 24,3
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 32,6 hp hp 32,632,6 32,6 32,6 32,6
ng bow, Speed ....................................................................... min-1 2.600
Speed ....................................................................... min-1
Speed ....................................................................... min-1 2.600 2.600
2.600 2.600 2.600
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1 2.500
1 ................................................. min-1
1 ................................................. min-1 2.500 2.500
2.500 2.500 2.500
67
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opt
*F
BW 100 AD-5 A
1752 B
1072 C523 D700 H 1808H2 2568
K L
254 O
2529 S
36 W
13 1000
BW BW
120100
AD-5
AD-5 1752
1752 1272
1072 523
523 700 1808
700 180825682568
254 254
2529 2529
36 36
13 13
1000 1200
BW 120 AD-5 1752 1272 523 700 1808 2568 254 2529 36 13 1200
68
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AD-5 BWBW
100
120
BWAD-5
AD-5
100 AD-5 BW 120BW
AD-5
120 AD-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECEROPS
kg ........................... kg
CECE ...........................
2.600 kg 2.600
2.750 2.600 2.750 2.750
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE load
kg/cm
..............................
CECE ..............................
13,0 kg/cm 13,0
kg/cm 11,5 13,0 11,5 11,5
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 3.400 kg kg 3.400
3.500 3.400 3.500 3.500
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 10,0 km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
................................... km/h
km/h ...................................
0- 10,0 km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
3 Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D1803 D1803
D1803D1803 D1803 D1803
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage TIER4f
V V / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment DPF
......................................
...................................... DPF DPF DPF DPF DPF
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 3
.................................................
................................................. 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO 24,6
..........................................
14396 kW
kW.......................................... kW 24,624,6 24,6 24,6 24,6
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 33,0 hp
hp ........................................ hp 33,033,0 33,0 33,0 33,0
Speed ....................................................................... 2.600
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.600
min-1 2.600 2.600 2.600 2.600
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
69
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
Fo
70
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 SL-5 BWBW
100
120
BW 100 SL-5 BW 120BW
SL-5
SL-5 120 SL-5
SL-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECEROPS
kg ........................... kg
CECE ...........................
2.350 kg 2.350
2.500 2.350 2.500 2.500
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE load
kg/cm
.............................. kg/cm
CECE ..............................
11,8 11,8
kg/cm 10,4 11,8 10,4 10,4
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 2.800 kg kg 2.800
2.800 2.800 2.800 2.800
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 9,0 km/h
0- 9,0
0- 9,0 0- 9,0 0- 9,0 0- 9,0
Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 5,0 km/h km/h
0- 5,0
0- 5,0 0- 5,0 0- 5,0 0- 5,0
3 Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 DI D 1703
D 1703DID DI
1703 DI D 1703 DID 1703 DI
Emission stage .........................................................
EmissionEmission stage .........................................................
stage .........................................................
TIER4f TIER4f
TIER4fTIER4f TIER4f TIER4f
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO..........................................
14396 kW
kW..........................................
18,5 kW 18,518,5 18,5 18,5 18,5
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
25,0 hp 25,025,0 25,0 25,0 25,0
ng bow, Speed .......................................................................
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.200 2.200
min-1 2.200 2.200 2.200 2.200
Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
dle Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
front + rear front + rear
front +front
rear+ rear front + rear
front + rear
Dimensions in mm
e plate Brakes BrakesBrakes
w oil H brake
Service H1
Service H2
Service brake ........................................................... L L1 hydrost. W
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658system 962.......................................................
700.......................................................
system .......................................................
Steering Steering system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost.
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
32/10 grad grad32/10
32/10 32/10 32/10 32/10
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 0- 50
0- 50 0- 50 0- 50 0- 50
Technical Data BOMAG BOMAG
Exciter system ExciterExciter
systemsystem
BP 10/35 BP 12/40
Vibrating drum ..........................................................
Vibrating Vibrating front + rear
drum ..........................................................
drum .......................................................... front + rear
front +front
rear+ rear front + rear
front + rear
Drive system ............................................................
Drive system hydrost.
Drive............................................................
system ............................................................ hydrost. hydrost.
hydrost. hydrost. hydrost.
Frequency ................................................................
Frequency Frequency 72
................................................................ Hz
................................................................
Hz Hz 72 72 72 72 72
Weights
Amplitude .................................................................
AmplitudeAmplitude 0,50
................................................................. mm
.................................................................
mm mm0,500,50 0,50 0,50 0,50
Operating
Centrifugal forceweight CECE ...........................................
.......................................................
Centrifugal Centrifugal
force ....................................................... kg
force .......................................................
kN 34 kN kN 65
34 40 34 72 40
40
Basic weight
Sprinkler .............................................................
System SprinklerSprinkler
SystemSystem kg 64 71
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Dimensions
Capacities Capacities Capacities
Working width ..........................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 35,0 lmm
Fuel .......................................................................... l 350
35,0
35,0 35,0 400
35,0 35,0
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 165,0 l l 165,0
165,0 165,0 165,0 165,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
71
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
Fo
Earthwork and asphalt applications. 2 scrapers per drum, spring loaded and Sliding seat incl. double travel lever
tiltable ECONOMIZER with asphalt temperature
New construction and repair work for medium
Pressure and
sprinkler small
system with interval display
scale construction projects, on parking lots, sidewalks, cycle
switch BOMAG TELEMATIC
72
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 SL-5 BW
BW100
120
BWSL-5
100 SL-5 BW 120BW
SL-5 120 SL-5
SL-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECE
ROPS
kg ...........................
CECE ...........................
2.350 kg 2.500 2.350
kg 2.350 2.500 2.500
Average static linear loadAverage
CECE ..............................
Average
static linear static
loadlinear
CECE load
kg/cm
..............................
CECE ..............................
11,8 kg/cm kg/cm 10,4 11,8
11,8 10,4 10,4
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 2.800 kg 2.800 2.800
kg 2.800 2.800 2.800
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Workingwidth ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinner
radius,...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 9,0 km/h 0- 9,0 0- 9,0
0- 9,0 0- 9,0 0- 9,0
Working speed with vibration Working...................................
Working
speed with speed
vibration
with vibration
...................................
km/h ...................................
0- 5,0 km/h km/h 0- 5,0 0- 5,0
0- 5,0 0- 5,0 0- 5,0
3 Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703
D 1703 D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmission
stage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage VTIER4fV / TIER4f
/ TIER4f Stage V /Stage
TIER4f
V / TIER4f
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ISO ..........................................
14396 kW
kW..........................................
18,5 kW 18,518,5 18,5 18,5 18,5
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
25,0 hp 25,025,0 25,0 25,0 25,0
ng bow, Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
min-1 2.200 min-1 min-1 2.200 2.200
2.200 2.200 2.200
Electric equipment ...................................................
Electric equipment
Electric equipment
................................................... V
...................................................
V 12 V 12 12 12 12 12
dle Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
front + rear front
front +front
+ rearrear+ rear front + rear
front + rear
Dimensions in mm
e plate Brakes BrakesBrakes
w oil H brake
Service H1
Service H2
Service brake ........................................................... L L1 hydrost. W
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658Steering 962.......................................................
700.......................................................
system .......................................................
Steering system system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Steering method .......................................................
Steering Steering
method .......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Steering / oscillating angle Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle ..................................
grad +/- ..................................
32/10 grad 32/10 32/10
grad32/10 32/10 32/10
Crab walk .................................................................
Crab walk Crab
.................................................................
walk .................................................................
0- 50 0- 50 0- 50
0- 50 0- 50 0- 50
Technical Data BOMAG BOMAG
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
VibratingVibrating
drum ..........................................................
drum ..........................................................
Drive system ............................................................
Drive system
front + rear
Drive............................................................
system ............................................................
hydrost.
BP 10/35
front
front +front
+ rear
hydrost.
rear+ rear
hydrost.
hydrost.
BP 12/40
front + rear
front + rear
hydrost. hydrost.
Frequency ................................................................
Frequency Frequency
................................................................
................................................................
Hz 72/65 Hz 72/65 72/65
Hz 72/65 72/65 72/65
Weights
Amplitude .................................................................
Amplitude Amplitude
.................................................................
.................................................................
mm 0,50 mm mm0,500,50 0,50 0,50 0,50
Operating
Centrifugal forceweight CECE
Centrifugal ...........................................
.......................................................
Centrifugal
force ....................................................... kg
force .......................................................
kN 34/26 kN kN 65 40/26 34/26
34/26 72 40/26
40/26
Basic weight
Sprinkler .............................................................
System SprinklerSprinkler
SystemSystem kg 64 71
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressurepressure
Dimensions
Capacities Capacities Capacities
Working width ..........................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 35,0 mm
Fuel ..........................................................................
l l 350
35,0
35,0 35,0 400
35,0 35,0
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 165,0 l l 165,0
165,0 165,0 165,0 165,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may bemodifications
shown
Technical
with options.
reserved.
modifications
Machines
reserved.
mayMachines
be shownmay
withbe
options.
shown with options.
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
73
COMBINATION ROLLER Standard Equipment
Four smooth rear rubber wheels
Opti
RO
Dimensions in mm
Dimensions inAmm B C D H H2 K L O S W
BW 90 AC-5
A1483 B956 C 433 D 580 H 1627H2 2304
K 255
L O
2194 28
S W
12 900
BW 90 AC-5 1483 956 433 580 1627 2304 255 2194 28 12 900
74
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 90 AC-5 BW 90 AC-5
Weights Weights
Operating weight CECE ........................................... kg
Operating weight CECE ...........................................
1.570 kg 1.570
Axle load, drum / wheels Axle CECE load, drum / wheels CECEkg
............................... ...............................
740/830 kg 740/830
Wheel load CECE .................................................... kg
Wheel load CECE ....................................................
208 kg 208
Static linear load, front CECE Static.................................. kg/cm
linear load, front CECE ..................................
8,2 kg/cm 8,2
Grossweight ............................................................. kg
Grossweight .............................................................
1.900 kg 1.900
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 900 mm 900
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 2.030 mm 2.030
Driving Characteristics
Driving Characteristics
3 Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h 0- 10,0
0,136 Working speed with vibration Working ................................... km/h
speed with vibration ...................................
0- 10,0 km/h 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
.......................... % ..........................
without/with vibr. 40/30 % 40/30
0,167
Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................ Kubota Kubota
Type .........................................................................
Type .........................................................................
D 902 D 902
Emission stage .........................................................
Emission stage .........................................................
Stage V / TIER4f Stage V / TIER4f
Cooling .....................................................................
Cooling .....................................................................
water water
Number of cylinders .................................................
Number of cylinders ................................................. 3 3
ng bow, Performance ISO 14396 Performance .......................................... kW
ISO 14396 ..........................................
15,1 kW 15,1
Performance SAE J 1995Performance ........................................ hp
SAE J 1995 ........................................
20,2 hp 20,2
dle Speed ....................................................................... min-1
Speed .......................................................................
3.000 min-1 3.000
Dimensions
Speed adjustment 1in mm
e plate ................................................. min-1
Speed adjustment 1 ................................................. 2.100 min-1 2.100
H H1 H2 LV L1 12 W
Speed adjustment 2 ................................................. min-1
Speed adjustment 2 ................................................. 3.000 min-1 3.000
w oil Electric equipment ...................................................
Electric equipment ................................................... V 12
BP 10/35
Driven drum Driven 658 962 700 1084 532 350
.............................................................
drum .............................................................
front front
Driven wheels ..........................................................
Driven wheels ..........................................................
4 4
BP 12/40 658 962 700 1084 542 400
Drums and Tyres Drums and Tyres
Tyre size ..................................................................
Tyre size ..................................................................
190/60-15 190/60-15
Brakes Brakes
Technical Data Service brake ...........................................................
Service brake ........................................................... hydrost. BOMAG
hydrost. BOMAG
Parking brake ...........................................................
Parking brake ...........................................................
hydromec. hydromec.
Steering Steering
BP 10/35 BP 12/40
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
Weights
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Operating weight
Steering / oscillating angle CECE
Steering ...........................................
+/- ..................................
/ oscillating angle +/- ..................................
grad 33/8 kg
grad 65
33/8 72
Basic
Crab walkweight .............................................................
.................................................................
Crab walk .................................................................
0- 50 kg 64
0- 50 71
Dimensions
Exciter system Exciter system
Vibrating drum ..........................................................
Vibrating drum ..........................................................
front front
Working
Drive system width ..........................................................
............................................................
Drive system ............................................................
hydrost. mm 350
hydrost. 400
Frequency ................................................................ Hz
Frequency ................................................................
42/63 Hz 42/63
Driving Characteristics
Amplitude ................................................................. mm
Amplitude .................................................................
0,50 mm 0,50
Working speed, max. ...............................................
Centrifugal force .......................................................
Centrifugal force kN
.......................................................
8/17 m/min
kN 25
8/17 25
Max. gradeability
Sprinkler (dep. onSystem
System Sprinkler soil con.) ........................ % 30 30
Type of sprinkling .....................................................
Type of sprinkling .....................................................
pressure pressure
Drive
Capacities Capacities
Engine manufacturer ................................................
Fuel .......................................................................... 30,0
Fuel ..........................................................................
l l Honda
30,0 Honda
Type .........................................................................
Water ....................................................................... 100,0
Water .......................................................................
l l GX 120
100,0 GX 120
Emission stage ......................................................... 11,0
Emulsion ..................................................................
Emulsion .................................................................. l l StageV/CARB
11,0 P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options.
75
COMBINATION ROLLERS Standard Equipment
Four smooth rear rubber wheels
Opti
RO
suitable for walkways and cycle paths, parking lots and all
Multi-function display incl. operating hour BOMAG TELEMATIC
meter Electronic fuel gauge
types of repair works. Water level Theft protection
Emergency STOP Indicator and hazard lights
PRE 462 04 010 Intelligent Vibration Control (IVC) Rotary beacon
Integrated stowage compartment Optional lighting on ROPS
Adjustable operator's seat Battery disconnect switch
Seat contact switch Environmentally compliant hydraulic oil
Vandalism protection Special painting
12V socket Edge cutter
Working lights front and rear Port for hydraulik breaker
BOMAG
Back-up alarm Backup warning buzzer with broadband Hellerwald
Lockable engine hood made of composite technology D-56154 Boppard
P.O. Box 5162
material Brake release device Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Lashing eyes, galvanized
PRE 462 04 010 110219 Sa04
Single point lifting device * Standard delivery with CE conformity
(valid within European Union)
Dimensions in mm
Dimensions A
in mm B C D H H2 K L O S W
BW 100 ACM-5 1483
A B
1056
C435 D580 H 1663H2 2340
K 240
L
2194
O S
28
W
12 1000
BWBW
100100 ACM-5 1483
SCC-5 1483 1056
1056 435
435 580
580 1663
166323402340
240 240
2194 2194
28 12
28 1000
12 1000
BW 100 SCC-5 1483 1056 435 580 1663 2340 240 2194 28 12 1000
76
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 ACM-5 BWBW
100
100
BWACM-5
SCC-5
100 ACM-5BW 100BW
SCC-5
100 SCC-5
Weights Weights
Weights
Operating weight CECE ...........................................
OperatingOperating
weight CECE weight kg ...........................................
...........................................
CECE 1.600 kg kg 1.600
1.650 1.600 1.650 1.650
Axle load, drum / wheels Axle CECE load,
...............................
Axle
drum load,
/ wheels
drum CECE/ wheels kg
...............................
CECE ...............................
770/830 kg kg 770/830 770/830
775/875 775/875 775/875
Wheel load CECE ....................................................
Wheel load Wheel
CECE load kg
....................................................
CECE ....................................................
208 kg kg 208219 208 219 219
Static linear load, front CECE Static..................................
linear
Static
load,linear
frontload,
CECE front kg/cm
..................................
CECE ..................................
7,7 kg/cm 7,77,8 7,7
kg/cm 7,8 7,8
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
1.900 kg kg 1.900
1.900 1.900 1.900 1.900
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.000 1.000 1.000 1.000
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 1.980 mm mm1.980
1.980 1.980 1.980 1.980
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed ....................................................................... km/h
Speed .......................................................................
Speed .......................................................................
0- 10,0 km/h km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
0,136 Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h 0- 10,0
km/h 0- 10,00- 10,0 0- 10,0 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
40/30 40/30 40/30 40/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
D 902 D 902
D 902D 902 D 902 D 902
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage VTIER4fV / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
ng bow, Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 15,1 kW kW 15,115,1 15,1 15,1 15,1
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 20,2 hp hp 20,220,2 20,2 20,2 20,2
dle Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
3.000 3.000
min-1 3.000 3.000 3.000 3.000
Dimensions
Speed adjustment 1 in mm
e plate
.................................................
Speed adjustment
Speed adjustment min-1
1 ................................................. min-1
1 .................................................
2.100 2.100
min-1 2.100 2.100 2.100 2.100
77
COMBINATION ROLLERS Standard Equipment
Four smooth rear rubber wheels
Opti
*F
78
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AC-5 BW 100
BW 120
BWAC-5
AC-5
100 AC-5 BW 120BW
AC-5
120 AC-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECEOperating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS CECE ...........................
2.350 kg 2.4502.350
kg 2.350 2.450 2.450
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum CECEkg
.............................................
.............................................
1.150 kg 1.2001.150
kg 1.150 1.200 1.200
Axle load, wheels CECE Axle ..........................................
load,Axle
wheelsload,CECEwheels ..........................................
CECE kg ..........................................
1.200 kg kg 1.200
1.2501.200 1.250 1.250
Wheel load CECE ....................................................
Wheel load WheelCECE load kg
.................................................... kg
CECE ....................................................
300 kg 300313 300 313 313
Static linear load, front CECE Static..................................
linear
Static
load,linear
frontload,
CECE front kg/cm
..................................
CECE ..................................
11,5 kg/cm kg/cm 10,0 11,5
11,5 10,0 10,0
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
3.150 kg kg 3.150
3.2503.150 3.250 3.250
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Working
width ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.2001.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.4502.550 2.450 2.450
3 Driving Characteristics
DrivingDriving
Characteristics
Characteristics
0,136 Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
km/h 0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
Working
speed with speed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
0,167 Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr. 40/30 %
.......................... 40/3040/30
% 40/30 40/30 40/30
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703
D 1703 D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage IIIaStage
Stage IIIa IIIa / TIER4i
/ TIER4i
/ TIER4i Stage IIIaStage IIIa / TIER4i
/ TIER4i
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water water
water water water
ng bow, Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 24,3 kW kW 24,3 24,3 24,3 24,3 24,3
dle Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 32,6 hp hp 32,6 32,6 32,6 32,6 32,6
Dimensions in mm
e plate Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.600 min-1 2.6002.600
2.600 2.600 2.600
w oil H H1
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment
Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment
H2 L min-1
L1 W
1 ................................................. min-1
1 .................................................
min-1
2.500
2 ................................................. min-1
2 .................................................
2.600
min-1 2.5002.500
2.500
min-1 2.6002.600
2.600
2.500 2.500
2.600 2.600
BP 10/35
Electric equipment 658 962 700 1084 532 350 V
...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V 12 12 12 12 12
Driven drum .............................................................
Driven drum Driven .............................................................
drum .............................................................
standard standard
standard standard standardstandard
BP 12/40
Driven 658 962 700
wheels ..........................................................
Driven wheels
Driven 1084 542 4 400
..........................................................
wheels .......................................................... 4 4 4 4 4
Drums and Tyres DrumsDrums
and Tyres
and Tyres
Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
205/60-15 205/60-15
9.5/65-15
205/60-15 9.5/65-159.5/65-15
Technical
Brakes Data BrakesBrakes BOMAG BOMAG
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. BP 10/35
hydromec.
hydromec.
hydromec. BP 12/40
hydromec.hydromec.
Steering Steering
Steering
Weights
Steering system .......................................................
Steering Steering
system .......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Operating
Steering methodweight CECE ...........................................
.......................................................
Steering Steering
method ....................................................... kg
method .......................................................
hydrost. 65 hydrost.
hydrost. hydrost. 72 hydrost.
hydrost.
Basic
Steering weight
/ oscillating.............................................................
angle Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle .................................. kg
grad +/- ..................................
32/10 grad 64
grad 32/1032/10
32/10 71 32/10
32/10
Crab walk .................................................................
Crab walk Crab
.................................................................
walk .................................................................
50 500- 50 50 0- 50 0- 50
Dimensions
Exciter system ExciterExciter systemsystem
Working width
Vibrating drum ..........................................................
..........................................................
VibratingVibrating
drum .......................................................... mm
drum ..........................................................
front 350 front front
front 400
front front
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Driving Characteristics
Frequency ................................................................
Frequency Frequency Hz
................................................................ Hz
................................................................
63/67 Hz 63/67
63/6763/67 63/67 63/67
Working speed, max. ............................................... m/min 25
Amplitude .................................................................
Amplitude Amplitude mm
.................................................................
.................................................................
0,50 mm mm 0,500,50 0,50 25
0,50 0,50
Max. gradeability (dep. on soil con.) ........................ %
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force ....................................................... kN
force .......................................................
30/34 kN 30/34
30
36/4130/34
30
36/41 36/41
Sprinkler System Sprinkler
Sprinkler
SystemSystem
Drive
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling.....................................................
.....................................................
pressure pressure
pressure
pressure pressurepressure
Engine
Capacities manufacturer Capacities ................................................
Capacities Honda Honda
Type .........................................................................
Fuel ..........................................................................
Fuel .......................................................................... l
Fuel ..........................................................................
l 35,0 l GX 12035,0
35,0
35,0 GX
35,0 120
35,0
Emission stage .........................................................
Water ....................................................................... 160,0
Water .......................................................................
Water .......................................................................
l l l StageV/CARB
160,0160,0
160,0 P.3 StageV/CARB
160,0 160,0 P.3
Cooling .....................................................................
EmulsionEmulsion
..................................................................
Emulsion .................................................................. l
..................................................................
l 45,0 l
air 45,0 45,0
45,0
air
45,0 45,0
79
COMBINATION ROLLERS Standard Equipment
Four smooth rear rubber wheels
Opti
*F
80
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AC-5 BWBW
100
120
BWAC-5
AC-5
100 AC-5 BW 120BW
AC-5
120 AC-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS kg
CECE ...........................
2.400 kg 2.400
2.450 2.400 2.450 2.450
Axle load, drum / wheels Axle CECE load,
...............................
Axle
drum load,
/ wheels
drum CECE / wheels kg 1.150/1.250 kg
...............................
CECE ............................... kg 1.150/1.250
1.150/1.250
1.200/1.250 1.200/1.250
1.200/1.250
Wheel load CECE ....................................................
Wheel load WheelCECE load kg
....................................................
CECE ....................................................
313 kg kg 313313 313 313 313
Static linear load, front CECE Static..................................
linear
Static
load, linear
frontload,
CECE front kg/cm
..................................
12,2 kg/cm
CECE .................................. 12,2
kg/cm 10,0 12,2 10,0 10,0
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
2.800 kg kg 2.800
2.950 2.800 2.950 2.950
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed ....................................................................... km/h
Speed .......................................................................
Speed .......................................................................
0- 10,0 km/h km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
0,136 Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h 0- 10,0
km/h 0- 10,00- 10,0 0- 10,0 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
40/30 40/30 40/30 40/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
D1803 D1803
D1803D1803 D1803 D1803
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage TIER4f
V V / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DPF DPF DPF DPF DPF DPF
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water
water water water water
ng bow, Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 24,6 kW kW 24,624,6 24,6 24,6 24,6
dle Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 33,0 hp hp 33,033,0 33,0 33,0 33,0
Dimensions in mm
e plate
Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.600 2.600
min-1 2.600 2.600 2.600 2.600
81
ECONOMIZER
Advantages:
■■ Prevents unnecessary passes (no overcompaction)
Saves time and fuel
■■ Identifies weak spots (no rework)
■■ Easy to understand (no calibration, no separate swit-
ching on)
82
STONEGUARD
Advantages:
■■ Increases working speed by up to 30%
■■ Prevents edges and paving stone breakages
■■ Allows vibratory compaction to the very last stone
■■ Vibratory compaction of large slabs possible
■■ Prevents property damage
83
COMFORTABLE CONTROL LEVER
Advantages:
■■ Reduces the stress on the operator
■■ Reduces the documentation effort required to create a risk assessment
84
NOTES ON PERFORMANCE DATA
SOIL OF COMPACTION
For the determination of the performance in earthwork the lift height of
the compacted material is of utmost importance. The processed lift height
depends mainly on soil type, compaction requirements and the compac-
tion equipment used for the job. The reference values in the following
tables are the results of compaction trials and practical applications.
Under normal application related conditions the required compaction
values are thereby reached after four to eight passes.
ASPHALT COMPACTION
In asphalt compaction the number of required passes may vary extremely.
It mainly depends on the compactibility of the mixture, the precompaction
by the paver, the mixture temperature during compaction, the layer thick-
ness as well as the characteristic data of the compactor.
The following tables contain mean area and volumetric output data for
the compaction equipment.
85
APPLICATION TIPS FOR EARTHWORKS AND ASPHALTWORKS
50 ➝ 40 kN kg
BT 60 ≤ 15 < 62
BT 65 16-17 62-85
B(V)P 10/xx - BVP 18/45 < 20 47-91
BP 20/50 (D) ≥ 20 95-109
BP 25/50 (D) ≥ 25 108-122
BPR 25/xx ≤ 25 ≤ 150
BPR 35/xx ≤ 35 ≤ 230
BPR 45/55 D, BPR 50/55 D ≤ 50 ≤ 400
BPR 55/65 D, BPR 60/65 D ≤ 60 ≤ 460
BPR 70/70 D ≤ 70 ≤ 600
BPR 100/80 D, BPH 80/65 S ≤ 100 > 700
BW 55 E 10 ≤ 170
BW 71 E-2 16 ≤ 530
BW 65 H 22 ≤ 800
BW 75 H 40 ≤ 1100
BMP 8500 72 ≤ 1500
kN kg 2 - 4 cm 6 - 8 cm 10 - 14 cm
BW 55 E 10-16 150-500 ✔■ ✔ –
BW 71 E-2 10-16 150-500 ✔ ✔ ✔
BW 65 H, BW 75 H 22-40 650-1100 ✔ ✔ ✔
86 suitable – unsuitable
■■ These guidelines are the result of trial compaction and site operations. Compaction specifications can generally be achieved in four to eight
passes under normal application conditions.
– 30 ➝ 25 45 ➝ 35 35 ➝ 30 30 ➝ 25
– 30 ➝ 25 50 ➝ 40 35 ➝ 30 30 ➝ 25
– – 25 ➝ 20 20 ➝ 15 –
– – 30 ➝ 25 25 ➝ 20 –
15 ➝ 13 35 ➝ 30 30 ➝ 25 20 ➝ 15
– 35 ➝ 30 30 ➝ 25 30 ➝ 25 20 ➝ 15
– 35 ➝ 30 30 ➝ 25 30 ➝ 25 20 ➝ 15
– 42 ➝ 35 35 ➝ 30 35 ➝ 30 30 ➝ 25
– 50 ➝ 40 45 ➝ 35 45 ➝ 35 30 ➝ 25
35 ➝ 40 55 ➝ 45 50 ➝ 40 50 ➝ 40 35 ➝ 30
50 ➝ 45 75 ➝ 60 60 ➝ 50 60 ➝ 50 40 ➝ 35
– – 25 ➝ 20 25 ➝ 20 –
– – 25 ➝ 20 25 ➝ 20 18 ➝ 15
– 13 ➝ 10 25 ➝ 20 25 ➝ 20 12 ➝ 10
– 13 ➝ 10 30 ➝ 25 30 ➝ 25 18 ➝ 15
– 35 ➝ 30 40 ➝ 35 40 ➝ 35 35 ➝ 30
87
APPLICATION TIPS FOR PAVING WORKS
S S
S
B L B
B L L
Plastic mat
S = Thickness kN kg 6 cm 8-10 cm > 12 cm
■■ These guidelines are the result of trial compaction and site operations. Compaction specifications can generally be
achieved in four to eight passes under normal application conditions.
S S
S S S S S
S S
B L B
B B B L L BL B
BL B L L L L
L B L/B 80 cm
STONEGUARD
S = Thickness kN kg 6 cm 8 cm 10 cm > 10 cm
BPR 35/60
≤ 35 ≤ 230 ✔ ✔ ✔ –
BPR 35/60 D
■■ Concrete blocks
■■ Smooth natural stone
■■ Large surfaces BPR 50/55 D
■■ Non bevelled stones BPR 55/65 D ≤ 60 ≤ 460 – ✔ (1) ✔ ✔
■■ Sensitive surfaces BPR 60/65 D
(1) Not suitable for large formats (L/W 50 cm) and bar formats.
88 suitable – unsuitable
The following list of terms or calculation bases serves as a help for better
TERMINOLOGY
understanding of the technical data.
No. Term Dim EXPLANATION
1 Axle load kg the value of the static weight (in kg) applied to an axle
half of the oscillation distance in millimeters (mm) that the ompacting tool (plate or drum) moves during one
2 Amplitude mm
rotation of the exciter shaft
3 Basic weight kg the static weight of the machine without fuels and lubricants
the force generated by the exciter shaft in kilonewtons (kN), which causes the compaction medium (drum or
4 Centrifugal force kN plate) to vibrate. Depends on the vibrating mass of the compacting tool and the frequency.
Attention: The indication of a high centrifugal mass is no guarantee for a high compaction performance.
■■ mechanical from diesel or gasoline engine via - V-belt, toothed belt or chain, transmission, drive shaft
6 Drive -
■■ hydrostatic from diesel or gasoline engine via - hydraulic pump and hydraulic motor
the number of revolutions the exciter shaft performs per second (Hz) or per minute (l/min)
Hz Example: 50 Hz = 50 rev./sec
7 Frequency
1/min = 50 x 60
= 3000 rpm
8 Fuel consumption l/h is the average engine fuel consumption at 70% capacity utilisation
11 Rasted speed rpm the number of revolutions of the diesel or gasoline engine per minute
12 Static area load kg/m2 in accordance with the operating weight of the machine in kg divided by the contact area of the base plate
kg/cm
13 Static linear load or the axle load (kg) divided by the load or working width of the drum in kg/m (cm) od (m)
kg/m
the turning radius in mm, that the machine can drive at full lock;
14 Track radius mm
measured from the theoretical centre of the circle to the inner edge of the drum/wheel
15 Travel speed km/h the distance in kilometers (km) the machine travels in one hours (h)
16 Worlking speed m/min the distance in (m) the machine travels per minute (min)
89
3-2-1 warranty as a standard
IF YOU OFFER HIGH QUALITY, YOU CAN ALSO GIVE EXTENSIVE WARRANTY COVER
Extended warranty
NEW OPTIONS: EXTENDED WARRANTIES FOR NEW MACHINES
RRANTY
WA
Material
Material + wage
YEARS
RRANTY
WA
Material
Material + wage
YEARS
90
MAINTENANCE/PARTS SERVICE
■■ A worldwide team of specialists is at your disposal. This dedicated network provides support for customers in
countries all over the world.
■■ Parts for maintenance, service and repair are available from our network of branches and dealers.
■■ Easy to read catalogues ensure quick indentification and ordering of all parts.
■■ Only use original BOMAG spare parts and avoid unnecessary downtime.
NOTICE
91
NOTICE
92
NOTICE
93
NOTICE
94
Head Office/Hauptsitz: BOMAG FRANCE S.A.S.
BOMAG 2, avenue du Général de Gaulle
Hellerwald 91170 Viry-Châtillon
56154 Boppard FRANCE
GERMANY Tel.: +33 1 69578600
Tel.: +49 6742 100-0 Fax: +33 1 69962660
Fax: +49 6742 3090 e-mail: france@bomag.com
e-mail: info@bomag.com
BOMAG (GREAT BRITAIN), LTD.
BOMAG Sheldon Way
Maschinenhandelsgesellschaft m.b.H. Larkfield, Aylesford
Klausenweg 654 Kent ME20 6SE
2534 Alland GREAT BRITAIN
AUSTRIA Tel.: +44 1622 716611
Tel.: +43 2258 20202 Fax: +44 1622 710233
Fax: +43 2258 20202-20 e-mail: gb@bomag.com
e-mail: austria@bomag.com
BOMAG ITALIA Srl.
BOMAG Via Roma 50
MARINI EQUIPAMENTOS LTDA. 48011 Alfonsine
Rua Comendador Clemente Cifali, 530 ITALIA
Distrito Industrial Ritter Tel.: +39 0544 864235
Cachoeirinha – RS Fax: +39 0544-864367
BRAZIL e-mail: italy@bomag.com
ZIP code 94935-225
Tel.: +55 51 2125-6677 FAYAT BOMAG Polska Sp. z o.o.
Fax: +55 51 3470-6220 Ul. Szyszkowa 52
e-mail: brasil@bomag.com 02-285 Warszawa
POLAND
BOMAG (CANADA), INC. Tel.: +48 22 482 04 00
2233 Argentia Road Fax: +48 22 482 04 01
East Tower, Suites 302 e-mail: poland@bomag.com
Mississauga, Ontario L5N 2X7
CANADA FAYAT BOMAG RUS OOO
Tel.: +1 800 782 6624 141400, RF, Moscow region
Fax: +1 905 361 9962 Khimki, Klayazma block, h. 1-g
e-mail: canada@bomag.com RUSSIA
Tel: +7 (495) 287 92 90
BOMAG (CHINA) Fax: +7 (495) 287 92 91
Compaction Machinery Co. Ltd. e-mail: russia@bomag.com
No. 2808 West Huancheng Road
Shanghai Comprehensive Industrial Zone (Fengxian) BOMAG GmbH
Shanghai 201401 300 Beach Road
CHINA The Concourse, #18-06
Tel.: +86 21 33655566 Singapore 199555
Fax: +86 21 33655508 SINGAPORE
e-mail: china@bomag.com Tel.: +65 6 294 1277
Fax: +65 6 294 1377
BOMA Equipment Hong Kong LTD e-mail: singapore@bomag.com
Wayson Commercial Building
28 Connaught Road West BOMAG Americas Inc.
Sheung Wan 125 Blue Granite Parkway
HONG KONG Ridgeway SC 29130
Tel: +86-20-8136-1380 U.S.A.
Fax: +86-20-8136-1062 Tel.: +1 803 3370700
e-mail: bomahk@bomag.com Fax: +1 803 3370800
e-mail: usa@bomag.com
03/19 PRE101329