Professional Documents
Culture Documents
AVIC-F900BT AVIC-F700BT AVIC-F7010BT: Operation Manual
AVIC-F900BT AVIC-F700BT AVIC-F7010BT: Operation Manual
AVIC-F900BT
AVIC-F700BT
AVIC-F7010BT
Notice to all users:
Be sure to read “Important Information for the user” first!
“Important Information for the user” includes the
important information that you must understand before
using this navigation system.
This software requires that the navigation system is
properly connected to your vehicle’s parking brake and
depending on your vehicle, additional installation may
be required. For more information, please contact your
Authorized Pioneer Electronics retailer or call us at
(800) 421-1404.
English
Contents
Regular startup 17
Important How to use the navigation menu
screens 18
The screens shown in the examples may differ
– Screen switching overview 18
from the actual screens. – What you can do on each menu 19
The actual screens may be changed without – Displaying the rear camera image 19
notice for performance and function improve- How to use the map 20
ments. – How to read the map screen 20
– Switching the map between 2D and
3D 22
Introduction
– Changing the scale of the map 22
Manual overview 8
– Scrolling the map to the position you
– How to read this manual 8
want to see 22
– Terminology 8
– Changing the tilt and rotation angle of
– About the definition of terminology 8
the map 23
Features 9
The basic flow of creating your route 23
Map coverage 11
The operations of a list screen (e.g. city
Protecting the LCD panel and screen 11
list) 24
Viewing the LCD comfortably 11
The operation of the on-screen keyboard 24
Notes for internal memory 11
– Before removing the vehicle Searching for and selecting a location
battery 11 Searching for a location by address 25
– About the data being deleted 11 Searching for the vicinity Points of Interest
– Resetting the microprocessor 11 (POI) 27
– Searching for POIs around the
Basic operation
cursor 27
Checking part names and functions 13
– Searching for a nearby POI 28
Inserting/ejecting a disc 14
– Searching for POIs along the current
– Inserting a disc 14
route 28
– Ejecting a disc 14
– Searching for POIs around the
Inserting and ejecting an SD memory
destination 28
card 14
– Using “Saved Criteria” 29
– Inserting an SD memory card 15
Searching for POIs by using the data on
– Ejecting an SD memory card 15
external storage devices (USB, SD) 31
Plugging and unplugging a USB storage
Searching for a location by coordinates 32
device 15
Selecting a location you searched for
– Plugging in a USB storage device 15
recently 33
– Unplugging a USB storage device 15
– Deleting an entry in “History” 33
Connecting and disconnecting iPod 16
Selecting a location stored in “Favorites” 33
– Connecting your iPod 16
– Deleting an entry in “Favorites” 34
– Disconnecting your iPod 16
Setting up a route to your home 34
Flow from startup to termination 16
Setting a route by recalling a saved route 34
On first-time startup 16
2 En
Contents
En 3
Contents
Using the touch panel keys (Music) 88 – Storing and recalling broadcast
– Selecting a track from the list 89 frequencies 104
– Browsing embedded text Switching the display 104
information 89 Using the “Function” menu 104
Using the “Function” menu 89 – Storing the strongest broadcast
frequencies 105
Playing the movie file (USB, SD) – Switching the seek mode 105
Starting procedures 91 – Tuning in strong signals 105
Reading the screen 91 – Switching the reception mode 105
Using the touch panel keys (Video) 91
– Searching for a desired scene and Using the radio (AM)
starting playback from a specified Reading the screen 106
time 92 Using the touch panel keys 106
Using the “Function” menu 92 – Switching between the detailed
information display and the preset list
Using the iPod® (iPod) display 106
Starting procedures 94 – Storing and recalling broadcast
Reading the screen 94 frequencies 107
Using the touch panel keys (Music) 95 Using the “Function” menu 107
– Browsing for a song 95 – Storing the strongest broadcast
Starting the video playback 96 frequencies 107
Using the touch panel keys (Video) 97 – Tuning in strong signals 107
– Browsing for a video 97
Using the “Function” menu 98 Using the XM tuner
Reading the screen 109
Using the radio (FM) Using the touch panel keys 109
Reading the screen 100 – Selecting an XM channel directly 110
Using the touch panel keys 100 – Displaying the Radio ID 110
– Switching between the detailed – Storing and recalling broadcast
information display and the preset list stations 111
display 101 – Selecting a channel from the list 111
– Storing and recalling broadcast – Using “My Mix” function 111
frequencies 101 – Using the direct traffic announcement
Using the “Function” menu 101 function 112
– Storing the strongest broadcast Using the “Function” menu 112
frequencies 101 – Setting the memorized songs 113
– Tuning in strong signals 102
Using the SIRIUS tuner
Using the HD Radio (Digital Radio) Reading the screen 114
Reading the screen 103 Using the touch panel keys 114
Using the touch panel keys 103 – Selecting a SIRIUS channel
– Switching between the detailed directly 115
information display and the preset list – Display the Radio ID 115
display 104
En 5
Contents
6 En
Contents
Operating Your Navigation System with Handling and care of the disc 168
Voice – Built-in drive and care 168
To Ensure Safe Driving 146 – Ambient conditions for playing a
Basics of Voice Operation 146 disc 168
– Flow of voice operation 146 Playable discs 169
– Starting voice operation 147 – About DVD-Video and CD 169
Operating iPod by voice 147 – About AVCHD recorded discs 169
Calling the entry on “Contacts” 147 – About playing DualDisc 169
Available Basic Voice Commands 148 – About Dolby Digital 169
– Basic commands 148 – About DTS sound 169
– Voice operation for the iPod 148 Detailed information for playable media 169
– Voice operation for AV source (other – Compatibility 169
than iPod) 149 – Media compatibility chart 172
– Voice commands related to hands-free About Bluetooth 176
phoning 150 About the SAT RADIO READY Logo 176
Tips for Voice Operation 151 About HD Radio 176
About SD and SDHC logo 177
Other functions About WMA 177
Setting the anti-theft function 152 About DivX 177
– Setting the password 152 About AAC 177
– Entering the password 152 Detailed information regarding connectable
– Deleting the password 152 iPods 177
– Forgotten passwords 152 Using the LCD screen correctly 178
Returning the navigation system to the – Handling the LCD screen 178
default or factory settings 153 – Liquid crystal display (LCD)
– Setting items to be deleted 154 screen 178
Appendix – Maintaining the LCD screen 178
Troubleshooting 155 – Small fluorescent tube 178
Messages and how to react to them 159 Display information 179
Messages for Audio Functions 160 – Destination Menu 179
Positioning technology 163 – Phone Menu 179
– Positioning by GPS 163 – Settings Menu 180
– Positioning by “Dead Reckoning” 163 – Shortcut menu 182
– How do GPS and “Dead Reckoning” – DVD Setup 183
work together? 163 Glossary 184
Handling large errors 164 Specifications 187
– When positioning by GPS is
impossible 164
– Conditions likely to cause noticeable
positioning errors 165
Route setting information 166
– Route search specifications 166
En 7
Chapter
01 Introduction
Glossary
See the glossary to find the meaning of a
term.
8 En
Chapter
Introduction 01
Introduction
“Video image” in this manual indicates the
moving images of DVD-Video, DivX, iPod, and
any equipment that is connected to this sys-
tem with an RCA cable, such as general-pur-
pose AV equipment.
En 9
Chapter
01 Introduction
10 En
Chapter
Introduction 01
— “Video image” that is output from the built- first time, the adjustment of the black density
Introduction
in DVD drive (DVD-V, DVD-VR, DivX) and for clear viewing is recommended.
AV input (AV1, AV2) can be displayed on
the rear display.
— This function is available for AVIC-F900BT Notes for internal memory
and AVIC-F90BT.
Before removing the vehicle
Rear view camera ready battery
You can display what is behind the vehicle if
connected to a rear view camera (e.g. ND- If the battery is disconnected or discharged,
BC2) (sold separately). the memory will be erased and must be repro-
grammed.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
Map coverage tings before you operate this function.
For more details about the map coverage of = For more detailed information about the
this navigation system, refer to the information items to be deleted, refer to Returning
on our website. the navigation system to the default or
factory settings on page 153.
En 11
Chapter
01 Introduction
12 En
Chapter
Basic operation 02
4 3 2 1
Basic operation
5
6
En 13
Chapter
02 Basic operation
14 En
Chapter
Basic operation 02
Basic operation
Insert it with the contact surface facing to the CAUTION
left and press the card until it clicks and com- ! To prevent data loss and damage to the sto-
pletely locks. rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
En 15
Chapter
02 Basic operation
16 En
Chapter
Basic operation 02
3 Touch the language that you want to % Start the engine to boot up the system.
use for the voice guidance. After a short pause, the navigation splash
screen comes on for a few seconds.
Basic operation
p The screen shown will differ depending on
the previous conditions.
p If the navigation screen was shown pre-
viously, the disclaimer appears.
Read the disclaimer carefully, checking its
details, and then touch [OK] if you agree to
the conditions.
p If other screens were shown previously, the
disclaimer screen will be skipped.
p If the anti-theft function is activated, you
The navigation system will now restart. must enter your password. After unlocking
the navigation system, the “Top Menu” ap-
4 Read the disclaimer carefully, checking
pears. If you enter the navigation screen
its details, and then touch [OK] if you
first, the disclaimer screen will appear.
agree to the conditions.
Read the disclaimer carefully, checking its
details, and then touch [OK] if you agree to
the conditions.
Regular startup
CAUTION
The rear view camera function is not available for
safety reasons until the navigation system boots
up completely.
En 17
Chapter
02 Basic operation
2 3 4
5 6
7 8
18 En
Chapter
Basic operation 02
Basic operation
Menu”.
This is the starting menu to access the desired 3 Touch [On] next to “Camera” to acti-
screens and operate the various functions. vate the camera setting.
2 Destination Menu
4 Press MENU button to display the “Top
You can search for your destination on this
Menu” and then touch [AV Source].
menu. You can also check or cancel your set
route from this menu. 5 Touch [RearView] on the “AV Source”
p [MSN Direct] is available for AVIC- menu.
F900BT and AVIC-F90BT.
3 Contacts screen
You can access the list of contacts to call up
an entry.
4 AV Source menu
You can access the screen for selecting the
audio and visual source to play.
5 Phone Menu
You can access the screen that is related to
hands-free phoning to see call histories and
change the settings on the Bluetooth wireless
technology connection.
6 Settings Menu
You can access the screen to customize set-
tings.
7 Map screen
Press MAP button to display the navigation
map screen.
8 AV operation screen
When you play the AV source, this screen ap-
pears regularly. Touching the icon on the top
left corner displays the “AV Source” menu.
p To return to the previous screen, touch
.
En 19
Chapter
02 Basic operation
1 2 3 4
6
h
7
g 8
f 9
e d c b
20 En
Chapter
Basic operation 02
This key will be displayed while you activate = For details, refer to Map Settings on
the dummy run (“Fly over” or “Demo page 125.
Mode”). Touching the key to cancel the p The estimated time of arrival is an ideal
Basic operation
dummy run. value that the navigation system com-
= For details, refer to Demo Mode on putes internally as the route is calcu-
page 129. lated. The estimated time of arrival
= For details, refer to Playing simulated tra- should be read just as a reference value,
vel at high speed on page 42. and does not guarantee arrival at the
9 Album artwork on iPod time indicated.
If you connect your iPod to this navigation sys- g Map scale
tem, the album artwork that is playing ap- The scale of the map is indicated by distance.
pears. h Second Maneuver Arrow*
a Shortcut to the AV operation screen Shows the turning direction after next and the
The AV Source currently selected is shown. distance to there.
Touching the indicator displays the AV opera- p This item is not shown when “Full
tion screen of the current source directly. Screen Cockpit” is set to “On”.
b Extension tab for the AV information bar = For details, refer to Map Settings on
Touching this tab opens the AV information page 125.
bar and enables you to briefly view the current
status on the AV source. Touching it again re- Meaning of guidance flags
tracts the bar.
: Destination
c Current route* The checkered flag indicates your
The route currently set is highlighted in bright destination.
color on the map. If a waypoint is set on the
: Waypoint
route, the route after the next waypoint is The yellow flags indicate your way-
highlighted in other color. points.
d Current position
: Start point
Indicates the current location of your vehicle. The light blue flag indicates your
The apex of the triangular mark indicates your start point.
orientation and the display moves automati-
cally as you drive. When you drive on a multi-lane road
p The apex of the triangular mark is the Appears where multi-lane roads exist when
proper current position. you are driving on your route. The highlighted
e Street name (or city name) that your vehi- lane indicates the recommended lane.
cle is traveling along
f Multi-Info window
Shows the value on the items selected on
“Displayed Info”. Touching this area allows
you to display the “Route Information”
screen.
= For details, refer to Displayed Info on
page 126.
= For details, refer to Checking the current
route conditions on page 41.
p This item is not shown when “Full
Screen Cockpit” is set to “On”.
En 21
Chapter
02 Basic operation
p This information is based on the map data- Changing the scale of the map
base. Thus, the information may be differ-
1 Press MAP button to display the navi-
ent from what actual condition exists. Use
gation map screen.
it as just a directional reference for your
driving. 2 Move MULTI-CONTROL down or up to
zoom in or out.
Note regarding the route highlighted
Moving MULTI-CONTROL upward or down-
in purple
ward once allows you to change the map
p A route highlighted in purple on the map
scale one step at a time. Holding MULTI-CON-
indicates that your route includes a road
TROL while moving it up or down allows you
not matching your preference on the fol-
to change the scale sequentially.
lowing settings in “Route”; “Unpaved
Roads”, “Highways”, “Ferries”, “U-turns”,
“Permit Needed”, “Toll Roads”.
For your safety, please review and obey all
local traffic rules along the highlighted
route.
3D map screen
22 En
Chapter
Basic operation 02
2 Touch to switch the 2D map mode. 3 Touch anywhere on the map briefly to
show the tilt controls and rotation angle.
3 Touch the map briefly.
Basic operation
Briefly touching the position on the map that
you want to see positions the cursor there.
j
Changing the tilt and rotation 4 Enter the information for the destination
and narrow down candidates to one.
angle of the map
On the 3D map screen, briefly touching the j
map shows the tilt controls and rotation angle. 5 Touch [Go Here Now] on the “Map Confir-
mation Screen”.
1 Press MAP button to display the navi-
gation map screen. j
6 The navigation system calculates the route
2 Touch to switch the 3D map mode. to your destination, and then shows the
route on the map.
j
7 After releasing the parking brake, drive in
accordance with navigation guidance.
En 23
Chapter
02 Basic operation
7 8 9 a
1 Text box:
24 En
Chapter
2 Touch [Address].
CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
En 25
Chapter
5 Touch the key next to “State:” and 8 Touch the desired city name.
touch the desired state, province, or terri-
tory on the list.
26 En
Chapter
En 27
Chapter
! Touching [Name] tab sorts the options in Searching for POIs along the
the list in alphabetical order. current route
! Touching [Distance] tab sorts the options in
p This function is available when the route is
the list in order by distance.
set.
p Icons are helpful for quickly telling the cate-
gory of facilities with the same name. 1 Touch [Destination] on the “Top Menu”,
and then touch [POI].
6 Touch on of the options at the bottom
of the “Map Confirmation Screen” to select 2 Touch [Along Route].
the next operation. The list of POI categories appears.
= For the subsequent operations, refer to
Searching for POIs around the cursor on the
previous page.
28 En
Chapter
En 29
Chapter
30 En
Chapter
3 Touch [Delete] on the right of the item 4 Touch the folder that includes the de-
that you want to delete. sired item on the list.
En 31
Chapter
5 Touch [Done].
The screen returns to the previous screen.
Touch the other key that you have not entered
2 Touch [Coordinate]. yet, enter the latitude or longitude and then
touch [Done] to finish the entry.
6 Touch [OK].
32 En
Chapter
Touching [Route...] and [Go Here Now] se- 3 Touch on of the options at the bottom
quentially enables you to set your selected po- of the “Map Confirmation Screen” to select
sition as your destination and calculate the the next operation.
route up that point.
= For details concerning other operations on
3 Touch [Yes].
A message will appear asking you to confirm
the deletion.
p Touching [Clear History] allows you to de-
lete all the entries.
p Because deleted data cannot be restored,
take extra care not to mistakenly delete
item.
En 33
Chapter
Selecting the item on the list provides an easy 2 Touch [Clear All].
way to specify the position. A message will appear asking you to confirm
p “Favorites” can store up to 30 locations. the deletion.
34 En
Chapter
En 35
Chapter
Map Route...
Shows a full-screen 2D map centered on the
cursor position.
Save as...
Places a map pin, and saves the position.
= For more details concerning the operation,
refer to Save as... on the next page.
Route...
Sets the destination, waypoints, and starting
point positions.
= For more details concerning the operation, Go Here Now
refer to Route... on this page. Calculates the new route by setting the cursor
position as the new destination.
Info = For more details concerning the operation,
Shows detailed information about the location refer to Setting the location as a new desti-
of the cursor position. nation on the next page.
= For more details concerning the operation,
refer to Viewing the information of a speci- Add Via
fied location on page 38. Recalculates the route by adding the cursor
position as a waypoint.
= For more details concerning the operation,
Enables you to call the position if a telephone refer to Setting the location as a waypoint
number is available. (Pairing with cellular on the next page.
phone featuring Bluetooth wireless technology
is required.) Continue
= For more details concerning the operation, Recalculates the route by setting the cursor
refer to Dialing a phone number on the position as the new destination. The previous
“Map Confirmation Screen” on page 58. destination becomes a waypoint.
36 En
Chapter
= For more details concerning the operation, 2 Touch [Go Here Now].
refer to Replacing the location as the new When the route is not set, route calculation
final destination on this page. starts immediately.
When the route is already set, a message will
Starting Point appear asking you to cancel the current route.
Sets the location as a starting point. Touch [Yes] to start the route calculation.
= For more details concerning the operation, p When the cursor overlaps with a destina-
En 37
Chapter
38 En
Chapter
En 39
Chapter
Deleting an entry in
“Favorites”
All entries in “Favorites” can be deleted at
once.
40 En
Chapter
conditions
The “Route Information” screen provides you
with various detailed information about the
current route.
This is an example showing a route with two
waypoints.
5
p This function is available only when the
En 41
Chapter
3 Touch [Dest.] to switch to the screen for Checking the entire route
first waypoint. overview on the map
You can check the entire outline of the current
route.
42 En
Chapter
Alternative options:
! Detailed Instructions
All turning points, passed streets and other
information is shown.
! Instructions
All turning points (where voice guidance is
given) are shown.
! Road List
Displays the turning points with the most
En 43
Chapter
Editing waypoints
You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that is passes through
these locations.
Adding a waypoint
1 Search for a location.
= For more details, refer to the descriptions Touching [Optimize] sorts the waypoints auto-
from page 25 to page 35. matically so that the route will compromise
the least time and distance.
2 Touch [Route...] on the “Map Confirma-
tion Screen”. 4 Touch [Done].
The route is recalculated and the map of the
3 Touch [Add Via]. current position appears.
When no waypoint is set, route calculation
starts immediately.
= For more details concerning the operation, Deleting a waypoint
refer to Sorting waypoints on this page. You can delete waypoints from the route and
p When you set waypoints in the route to your then recalculate the route. (You can delete
destination, the route up to the next way- waypoints successively.)
point will appear in light green. The rest of
the route will appear in light blue. 1 Touch [Destination] on the “Top Menu”,
and then touch [Route Function].
44 En
Chapter
2 Touch [Yes].
En 45
Chapter
2 Touch [Status].
Activating the service
3 Write your product key down in the fol-
You have to activate MSN Direct first.
lowing box;
p A web-connected computer is required for
the online subscription.
p If you have difficulty for the online subscrip-
tion, please call toll-free 1-866-658-7032.
46 En
Chapter
1 Access the following URL and read the This informations does not necessarily corre-
description. spond to actual information. Utilize the infor-
http://www.msndirect.com/pioneer mation for your reference.
It may take up to 24 hours for all the data to be-
2 Be sure to check the coverage area and come available under the following conditions:
other availabilities of MSN Direct on the ! When you use MSN Direct for the first time.
web page. ! When you have not performed this function
previously around the current area.
3 Move to the page for activation and
3 Touch [Status].
En 47
Chapter
48 En
Chapter
5 Touch the desired tab to change the Searching for a movie title by
sort order. selecting a theater
1 Touch [Destination] on the “Top Menu”,
and then touch [MSN Direct].
Available options;
En 49
Chapter
50 En
Chapter
1 Event-related icon
2 Street or location and direction
En 51
Chapter
Preparing communication
devices Registering your cellular
This navigation system has a built-in function
phone
to use cellular phones featuring Bluetooth You need to register your cellular phone featur-
wireless technology. ing Bluetooth wireless technology when you
While your cellular phone featuring Bluetooth connect it for the first time. A total of three
wireless technology is connected, the Blue- phones can be registered. Three registration
tooth connection status indicator lights. methods are available:
= For details, refer to Notes for hands-free ! Searching for nearby phones
phoning on page 62. ! Searching for a specified phone
p When the power of the navigation system ! Pairing from your mobile phone
turns off, the Bluetooth connection is also p If you try to register more than three cellu-
disconnected. When the system restarts, lar phones, the system will ask you to select
the system automatically attempts to re- one of the registered cellular phones to
connect the previously-connected cellular overwrite.
phone. Even when the connection is sev- = For details, refer to Connecting a regis-
ered for some reason, the system automati- tered cellular phone on page 55.
cally reconnects the specified cellular p The default device name displayed on the
phone (except when the connection is sev- cellular phone is “Pioneer Navi”. The PIN
ered due to cellular phone operations). code is “1111”.
52 En
Chapter
En 53
Chapter
5 Touch the model name of the cellular 1 Activate the Bluetooth wireless tech-
phone to be connected. nology on your cellular phone.
The system searches for cellular phones with For some cellular phones, no specific action is
Bluetooth technology that are waiting for the necessary to activate Bluetooth wireless tech-
connection and displays them in the list if the nology. For details, refer to the instruction
device has found. manual of your cellular phone.
54 En
Chapter
2 Touch [Connection].
En 55
Chapter
56 En
Chapter
En 57
Chapter
2 If you touch an entry on the list, dialing Touching [Others] displays the page including
starts. entries that are not assigned to any of the
p If you touch [Detail], you can check the de- other tabs.
tails of the party before making a phone
call. 4 Touch the desired entry on the list to
p To cancel the call after the system starts make a call.
dialing, touch . 5 Touch to end the call.
3 Touch to end the call.
Dialing a phone number on the
Calling a number in the “Map Confirmation Screen”
“Contacts” screen You can make a call to the searched location
After finding the entry you want to call in the or the location that you are selecting on the
“Contacts” screen, you can select the number map screen if the telephone number exists.
and make the call. 1 To display the “Map Confirmation
1 Press MENU button to display the “Top Screen”, search for a locations or moves
Menu”. the cursor and touch .
58 En
Chapter
= For more details about “Set Home”, Transferring the phone book
refer to Setting your home position on
page 134. You can transfer the numbers in a registered
user phone’s address book into the phone
book.
Dialing GOOG-411 p With some cellular phones, it may not be
You can dial GOOG-411, the free phone service possible to transfer the entire phone book
with one touch. at once. In this case, transfer addresses
one at a time from your phone book using
1 Touch [GOOG-411] on the “Phone your cellular phone.
Menu”. p The maximum 400 entries can be trans-
= For details, refer to Displaying the Phone ferred per cellular phone. If the entries ex-
Menu on page 52. ceed 400, the extra entries will not be
Dialing GOOG-411 starts. transferred. If more than one number is re-
gistered for one person, such as work place
2 You can now use the GOOG-411 phone
and home, each number is counted sepa-
En 59
Chapter
60 En
Chapter
2 Adjust volume to touch the sliders of 1 Touch [Phone Settings] on the “Phone
[Phone Ringtone] and [Phone Voice]. Menu”.
= For details, refer to Displaying the Phone
Menu on page 52.
[Phone Ringtone]:
This setting controls the incoming ring tone
volume.
[Phone Voice]:
En 61
Chapter
p If the [Refuse All Calls] is set to [On], re- Editing the device name
jected incoming calls will not be stored in
You can change the device name to be dis-
the missed call list.
played on your cellular phone. (Default is
[Pioneer Navi].)
Echo canceling and noise reduction 1 Touch [Phone Settings] on the “Phone
When you are operating hands-free phoning Menu”.
in the vehicle, you may hear an undesired = For details, refer to Displaying the Phone
echo. This function reduces the undesired Menu on page 52.
echo and noise while you are doing hands-free
phoning, and maintains a certain sound qual- 2 Touch [Edit Name].
ity. The keyboard to enter the name appears.
1 Touch [Phone Settings] on the “Phone 3 Touch to delete the current name,
Menu”. and enter the new name by using the key-
= For details, refer to Displaying the Phone board.
Menu on page 52.
62 En
Chapter
! If private mode is selected on the cellular ! You cannot make a call to the entry of an
phone, hands-free phoning may not be per- unknown user (no phone number) in the re-
formed. ceived call history.
! If calls are made by operating your cellular
Registration and connection phone, no history data will be recorded in
! Cellular phone operations vary depending the navigation system.
on the type of cellular phone. Refer to the
instruction manual that came with your cel- About phone book transfers
lular phone for detailed instructions. ! If there are more than 400 phone book en-
! Depending on the mobile phone, transfer- tries on your mobile phone, all entries may
ring phone book may not work even though not be able to be downloaded completely.
your phone can be pairing with the naviga- ! With some cellular phones, it may not be
tion system. In such case, disconnect your possible to transfer all items in the phone
phone, perform pairing again from your book at one time. In this case, transfer
phone to the navigation system, and then items one by one from your cellular phone.
perform the phone book transfer. ! Depending on the cellular phone, this navi-
En 63
Chapter
64 En
Chapter
You can play a normal music CD using the Using the touch panel keys
built-in drive of the navigation system. This
Touch panel keys
section describes these operations.
1 2
1 Insert the disc you want to play into
disc-loading slot.
Playback starts from the first track of the CD.
3
2 Touch [DISC] on the “AV Source” menu
4
to display the “CD” screen.
5
= For details concerning operations, refer to
6
Screen switching overview on page 18.
7
3 Use the touch panel keys on the screen
to control the disc. 1 Recalls equalizer curves
= For details, refer to Recalling equalizer
curves on page 140.
2 Displaying the “Function” menu
Reading the screen
En 65
Chapter
Selecting a track from the list ! Track — Repeats just the current track
p If you perform track search or fast for-
The list lets you see the list of track titles, file ward/rewind, repeat play is automati-
names or folder names on a disc and select cally canceled.
one of them to play. 2 Play tracks in a random order
Touching [Random] switches between [On]
and [Off].
3 Scan tracks of a CD
Touching [Scan] switches between [On]
and [Off]. Scan play lets you hear the first
10 seconds of each track on the CD. When
you find the desired track touch [Scan] to
turn scan play off.
p After the scanning of a CD is finished,
normal playback of the tracks will begin
1 Touch [List]. again.
2 Touch [Func].
1 2 3
1 Repeating play
Each touch of [Repeat] changes the set-
tings as follows:
! Disc — Repeats the current disc
66 En
Chapter
4
7
5
8
6
9 7
a 8
b
1 Switching the playing part
When playing a disc containing a mixture of
1 Source icon various media file types such, you can switch
Shows which source has been selected. between media files types to play.
2 Folder number indicator Touch [Media] repeatedly to switch between
Shows the folder number currently playing. the following media file types:
3 Track indicator CD (audio data (CD-DA)) — ROM (com-
Shows the track number currently playing. pressed audio file) — DivX (DivX video files)
4 Repeat/Random/Scan indicator p This touch panel key appears only when
The marks shown below indicate the current playing a disc containing a mixture of
playback status. various media file types.
and repeat range: Displays the current 2 Recalls equalizer curves
repeat range
En 67
Chapter
= For details, refer to Recalling equalizer Selecting a track from the list
curves on page 140. The list lets you see the list of track titles or
3 Displaying the “Function” menu folder names on a disc. If you touch a folder
= For details, refer to Using the on the list, you can view its contents. You can
“Function” menu on the next page. play a track on the list by touching it.
4 Select the previous or next folder
p Touching these keys enables you to se- 1 Touch [List].
lect the previous or next folder and play- The list of track titles and folder names ap-
back the first track on the folder. You pears.
cannot select a folder that does not
have a compressed audio file. 2 Touch your desired folder or track on
5 Skipping the track forward or backward the list.
Touching [p] skips to the start of the next
track. Touching [o] once skips to the start
of the current track. Touching it again will skip
to the previous track.
Fast rewind or forward
Keep touching [o] or [p] to perform fast
rewind or forward.
p Fast rewind is cancelled when it reaches
the beginning of the first file on the re-
peat range.
p In the case of compressed audio files, Touching or switches the selection to the
there is no sound on fast rewind or for- next or previous page in the list.
ward. Touching displays the content of the upper
p Moving MULTI-CONTROL left or right folder (parent folder). If the uppermost folder
enables you to perform the equivalent is listed, cannot be used.
operations. p If the selected folder does not contain any
6 Playback and Pause playable track, the track list is not dis-
Touching [f] switches between “playback” played.
and “pause”.
7 Shuffle All Browsing embedded text
All of the songs in the disc can be played at
random by touching only one key.
information
p If the disc contains a mixture of various Text information recorded in a compressed
media file types, all tracks within the audio file disc can be displayed.
current part (“CD” or “ROM”) are played
% Touch .
randomly.
The next piece of information is displayed.
p [Shuffle All] is not available for AVIC-
! Album Title : (album title)
F700BT and AVIC-F7010BT.
! Track Title : (track title)
p To cancel the random play, switch [Ran-
! Folder Title : (folder title)
dom] to [Off] on the “Function” menu.
! File Name : (file name)
8 Displaying the map screen
! Artist Name : (artist name)
If specific information has not been recorded
on compressed audio files on disc, nothing
may be displayed.
68 En
Chapter
p If you do not operate functions within about Touching [Random] switches between [On]
30 seconds, the display automatically re- and [Off]. When using ROM, the tracks in
turns to the ordinary display. the current repeat play range are randomly
played.
p If you turn [Random] to [On] when the
Using the “Function” menu repeat play range is set to [Track], the re-
peat play range changes to [Folder]
1 Touch [DISC] on the “AV Source” menu automatically.
to display the “ROM” screen. 3 Scan folders and tracks
= For details concerning operations, refer to Scan play lets you hear the first 10 seconds
Screen switching overview on page 18. of each track. Scan play is performed in the
current repeat play range.
2 Touch [Func].
Touching [Scan] switches between [On]
and [Off]. When you find the desired track
touch [Scan] to turn scan play off.
p After completion of track or folder scan-
ning, normal playback of the tracks will
begin again.
p If you turn [Random] to [On] when the
En 69
Chapter
11 Playing a DVD-Video
You can play a DVD-Video using the built-in Using the touch panel keys
drive of the navigation system. This section de-
Playback screen (page1)
scribes operations for playing a DVD-Video.
1 2
p AVIC-F700BT and AVIC-F7010BT cannot
play DVDs.
3
Reading the screen 4
123 45 6 7 8 5
6
7
a 9
8 9 ab
1 Source icon c
Shows which source has been selected. d
2 Audio track indicator e
Shows the audio track number and audio lan- 6
guage currently selected. 7
3 Title number indicator
Shows the title number currently playing. f 9g b
4 Audio channel indicator Playback screen (page3)
Shows the current audio channel type, such
1 2
as “Mch” (Multi-channel).
5 Chapter number indicator
Shows the chapter currently playing. h
6 Subtitle language indicator i
j
Shows the subtitle language currently se-
lected.
7 Digital sound format indicator k
6
Shows the digital sound format (surround
7
sound format) has been selected.
8 Play time indicator 8 9 b
Shows the elapsed playing time of the current
title. p With some discs, the icon 9 may be dis-
9 Viewing angle indicator played, meaning that the operation is not
Shows what viewing angle has been selected. valid.
a Subtitle number indicator 1 Recalls equalizer curves
Shows the subtitle number currently = For details, refer to Recalling equalizer
selected. curves on page 140.
2 Displaying the “Function” menu
70 En
Chapter
Playing a DVD-Video 11
= For details, refer to Using the Touching [m] or [n] to perform fast re-
“Function” menu on page 73. verse or forward.
3 Display the DVD menu If you keep touching [m] or [n] for five
You can display the menu by touching [Menu] seconds, fast reverse/fast forward continues
or [TOP M.] while a disc is playing. Touching even if you release either of these keys. To re-
either of these keys again lets you start play- sume playback at a desired point, touch
back from the location selected from the [f], [m] or [n].
menu. For details, refer to the instructions pro- f Specify the chapter you want to play back
vided with the disc. or the time to start playback by entering a
4 Skip forward or backward number
Touching [p] skips to the start of the next p For details, refer to Searching for a de-
chapter. Touching [o] once skips to the sired scene and starting playback from a
start of the current chapter. Touching it again specified time on the next page.
will skip to the previous chapter. g Perform the operation (such as resuming)
p Moving MULTI-CONTROL left or right stored in the disc
enables you to perform the equivalent When using a DVD that has a point recorded
operations. that indicates where to return to, the DVD re-
5 Playback and Pause turns to the specified point and begins play
Touching [f] switches between “playback” back from that point.
and “pause”. h Change the subtitle language (Multi-sub-
6 Switch the display title)
Playing a DVD-Video
Touching [Disp] changes the indication on the Each touch of [S.Title] switches between the
information plate as follows: subtitle languages.
Disc information display — Repeat range and i Change the viewing angle (Multi-angle)
L/R select display Each touch of [Angle] switches between view-
7 Displaying the map screen ing angles.
8 Display the DVD menu keypad p During playback of a scene shot from
= For details, refer to Using DVD menu by multiple angles, the angle icon is
touch panel keys on page 73. displayed. Turn the angle icon display
9 Switch next page of touch panel keys on or off using the “DVD Setup” menu.
a Stop playback = For details, refer to Setting the angle icon
b Hides the touch panel keys display on page 83.
Touching [Hide] hides the touch panel keys. j Change audio language and audio sys-
Touch anywhere on the LCD screen to display tems (Multi-audio)
the touch panel keys again. Each touch of [Audio] switches between
c Skip the title forward or backward audio language and audio system.
Touching [d] skips to the start of the next title. p DTS audio cannot be output, so select
Touching [c] skips to the start of the previous an audio setting other than DTS.
title. p Display indications such as MPEG-A
d Frame-by-frame playback (or slow-motion and Mch indicate the audio system re-
playback) corded on the DVD. Depending on the
= For details, refer to Frame-by-frame play- setting, playback may not be with the
back on page 73. same audio system as that indicated.
= For details, refer to Slow motion playback k Entering the numerical commands
on page 73. = For details, refer to Direct number search
e Fast reverse or forward on the next page.
En 71
Chapter
11 Playing a DVD-Video
72 En
Chapter
Playing a DVD-Video 11
2 Touch [TOP M.] or [Menu] to display 1 Keep touching [r] until is displayed
touch panel keys to operate the DVD during playback.
menu. The icon is displayed, forward slow motion
playback begins.
3 Touch the desired menu item. p To return to normal playback, touch [f].
Using DVD menu by touch panel keys 2 Touch [q] or [r] to adjust playback
speed during slow motion playback.
If items on the DVD menu appears at the bot- Each time you touch [q] or [r] it changes
tom of the screen, the touch panel keys may the speed in four steps in the following order:
overlay them. In such case, select a item 1/16 f 1/8 f 1/4 f 1/2
using those touch panel keys. p There is no sound during slow motion play-
1 Touch [a], [b], [c] or [d] to select the back.
desired menu item. p With some discs, images may be unclear
during slow motion playback.
p Reversing slow motion playback is not pos-
sible.
Play All Audio
Chapter Subtitle
Playing a DVD-Video
= For details concerning operations, refer to
Screen switching overview on page 18.
p If the touch panel keys for DVD menu selec-
tion disappears, touching anywhere and 2 Touch the screen to display the touch
touching displays them again. panel keys.
Frame-by-frame playback
This lets you move ahead one frame at a time
during playback.
% Touch [r] during playback.
Each time you touch [r], you move ahead 1 2 3
one frame.
1 Repeating play
To return to normal playback, touch [f].
Each touch of [Repeat] changes the set-
p With some discs, images may be unclear
tings as follows:
during frame-by-frame playback.
! Title — Repeats just the current title
! Chapter — Repeats just the current
Slow motion playback chapter
! Disc — Plays throughout the current
This lets you slow down playback speed.
disc
En 73
Chapter
11 Playing a DVD-Video
74 En
Chapter
Playing a DVD-VR 12
You can play a DVD-VR (DVD Video Recording Using the touch panel keys
Format) using the built-in drive of the naviga-
tion system. This section describes operations Playback screen (page1)
for DVD-VR. 1 2
p AVIC-F700BT and AVIC-F7010BT cannot
play DVD-VR.
3
4
Reading the screen 5
6
12 3 4 5 6 7 8
7
8
9 9abc
d
e
1 Source icon f
Shows which source has been selected. g
2 Audio track indicator h
Shows the audio track number currently se- 7
Playing a DVD-VR
lected. 8
3 Title number indicator
i a c
Shows the title number currently playing.
4 Audio channel indicator p With some discs, the icon 9 may be dis-
Shows the current audio channel type, such played, meaning that the operation is not
as “Mch” (Multi-channel). valid.
5 Chapter number indicator 1 Recalls equalizer curves
Shows the chapter currently playing. = For details, refer to Recalling equalizer
6 Play mode indicator curves on page 140.
Shows the current play mode. 2 Displaying the “Function” menu
= For details, refer to Switching the play- = For details, refer to Using the
back mode on page 77. “Function” menu on page 78.
7 Digital sound format indicator 3 c CM Back/CM Skip d
Shows the digital sound format (surround = For details, refer to Using the short-
sound format) has been selected. time skip function on page 77.
8 Play time indicator 4 Switching the playback mode
Shows the elapsed playing time of the current = For details, refer to Switching the play-
title. back mode on page 77.
9 Mixing condition indicator 5 Skip forward or backward
Shows the current mixing condition. Touching [p] skips to the start of the next
chapter. Touching [o] once skips to the
start of the current chapter. Touching it again
will skip to the previous chapter.
En 75
Chapter
12 Playing a DVD-VR
p Moving MULTI-CONTROL left or right even if you release either of these keys. To re-
enables you to perform the equivalent sume playback at a desired point, touch
operations. [f], [m] or [n].
6 Playback and Pause i Specify the chapter you want to play back
Touching [f] switches between “playback” or the time to start playback by entering a
and “pause”. number
7 Switch the display = For details, refer to Searching for a de-
Touching [Disp] changes the information as sired scene and starting playback from a
follows: specified time on this page.
Disc information display — Repeat range dis-
play
8 Displaying the map screen Searching for a desired scene
9 Display the title list and starting playback from a
Displays the title list recorded on the disc. specified time
a Switch next page of touch panel keys You can search for a desired scene by specify-
b Stop playback ing a title or a chapter, and the time.
c Hides the touch panel keys p Chapter search and time search are not
Touching [Hide] hides the touch panel keys. possible when disc playback has been
Touch anywhere on the LCD screen to display stopped.
the touch panel keys again.
d Change audio language and audio sys- 1 Touch [Search] and then touch [Title]
tems (Multi-audio) (title), [Chapter] (chapter), [Time] (time).
Each touch of [Audio] switches between
audio language and audio system.
p Display indications such as MPEG-A
and Mch indicate the audio system re-
corded on the DVD. Depending on the
setting, playback may not be with the
same audio system as that indicated.
e Skip the title forward or backward
Touching [d] skips to the start of the next title.
Touching [c] skips to the start of the previous
title. 2 Touch the keys to input the desired
f Change the subtitle language (Multi-sub- number or time and then touch [Enter].
title)
Each touch of [S.Title] switches between the
subtitle languages.
g Frame-by-frame playback (or slow-motion
playback)
= For details, refer to Frame-by-frame play-
back on the next page.
= For details, refer to Slow motion playback
on the next page.
h Fast reverse or forward
Touching [m] or [n] to perform fast re-
For titles, chapters
verse or forward.
! To select 3, touch [3] and [Enter] in order.
If you keep touching [m] or [n] for five
seconds, fast reverse/fast forward continues
76 En
Chapter
Playing a DVD-VR 12
! To select 10, touch [1] and [0] and [Enter] in 2 Touch the title to play from the list.
order.
For time (time search)
! To select 5 minutes 03 seconds, touch [5],
[0], [3] and [Enter] in order.
! To select 71 minutes 00 seconds, touch [7],
[1], [0], [0] and [Enter] in order.
p To cancel the input numbers, touch [Clear].
Playing a DVD-VR
Using the short-time skip function To return to normal playback, touch [f].
This function enables you to skip over your p With some discs, images may be unclear
specified interval on the video playback. This during frame-by-frame playback.
is useful to skip commercials on your recorded
DVD-VR disc.
Slow motion playback
% To skip progressively backward or for- This lets you slow down playback speed.
ward, touch [c CM Back] or [CM Skip d].
Each touch of [c CM Back] or [CM Skip d] 1 Keep touching [r] until is displayed
changes steps in the following order: during playback.
c CM Back The icon is displayed, forward slow motion
5 sec. — 15 sec. — 30 sec. — 1.0 min. — playback begins.
2.0 min. — 3.0 min. p To return to normal playback, touch [n]
CM Skip d or [m], etc.
30 sec. — 1.0 min. — 1.5 min. — 2.0 min. —
2 Touch [r] to adjust playback speed
3.0 min. — 5.0 min. — 10.0 min.
during slow motion playback.
Each touch of [r] changes the speed in four
Playing by selecting from the steps as below:
1/16 d 1/8 d 1/4 d 1/2
title list p There is no sound during slow motion play-
You can select and play a desired title from the back.
list. p With some discs, images may be unclear
1 Touch [List] on the playback screen. during slow motion playback.
En 77
Chapter
12 Playing a DVD-VR
1 2 3
1 Repeating play
Each touch of [Repeat] changes the set-
tings as follows:
! Title — Repeats just the current title
! Chapter — Repeats just the current
chapter
! Disc — Plays throughout the current
disc
p If you perform chapter (title) search, fast
forward/rewind or slow motion playback,
the repeat play range changes to [Disc].
2 Selecting audio output
When playing DVDs recorded with LPCM
audio, you can switch the audio output.
Touch [L/R Select] repeatedly until the de-
sired audio output appears in the display.
! L+R — Left and right
! L — Left
! R — Right
! L/R — Mixing left and right
p This function is not available when disc
playback has been stopped.
78 En
Chapter
Playing a DivX 13
You can play a DivX using the built-in drive of Using the touch panel keys
Playing a DivX
the navigation system. This section describes
that operations. Playback screen (page1)
p AVIC-F700BT and AVIC-F7010BT cannot 1 2
play DivX files.
3
Reading the screen
4
12 3 45 6 7 8
5
6
7
9
89ab
c
1 Source icon 3
Shows which source has been selected. d
2 Audio track indicator e
Shows the audio track number currently se- f
lected. 6
3 Folder number indicator 7
Shows the folder number currently playing.
g 9 b
4 Audio channel indicator
Shows the current audio channel type, such p With some discs, the icon 9 may be dis-
as “Mch” (Multi-channel). played, meaning that the operation is not
5 File number indicator valid.
Shows the file number currently playing. 1 Recalls equalizer curves
6 Subtitle number indicator = For details, refer to Recalling equalizer
Shows the subtitle number currently selected. curves on page 140.
7 Digital sound format indicator 2 Displaying the “Function” menu
Shows the digital sound format (surround = For details, refer to Using the
sound format) currently selected. “Function” menu on page 81.
8 Play time indicator 3 Select the previous or next folder
Shows the elapsed playing time of the current Touch [c] or [d] to select the desired folder.
title. 4 Skip forward or backward
9 Repeat range indicator Touching [p] skips to the start of the next
Shows which repeat range has been file. Touching [o] once skips to the start of
selected. the current file. Touching again will skip to the
previous file.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Playback and Pause
En 79
Chapter
13 Playing a DivX
Touching [f] switches between “playback” g Specify the chapter you want to play back
and “pause”. or the time to start playback by entering a
6 Switch the information number
Touching [Disp] changes the indication on the = For details, refer to Searching for a de-
information plate as follows: sired scene and starting playback from a
Disc information display — Current folder dis- specified time on this page.
play — File name display
7 Displaying the map screen
8 Switching the playing part Frame-by-frame playback
When playing a disc containing a mixture of This lets you move ahead one frame at a time
various media file types such, you can switch during playback.
between media files types to play.
Touch [Media] repeatedly to switch between % Touch [r] during playback.
the following media file types: Each time you touch [r], you move ahead
CD (audio data (CD-DA)) — ROM (com- one frame.
pressed audio file) — DivX (DivX video files) To return to normal playback, touch [f].
p This touch panel key appears only when p With some discs, images may be unclear
playing a disc containing a mixture of during frame-by-frame playback.
various media file types.
9 Switch next page of touch panel keys Slow motion playback
a Stop playback
b Hides the touch panel keys
This lets you slow down playback speed.
Touching [Hide] hides the touch panel keys. % Keep touching [r] until is displayed
Touch anywhere on the LCD screen to display during playback.
the touch panel keys again. The icon is displayed, forward slow motion
c Change audio language and audio sys- playback begins.
tems (Multi-audio) p To return to normal playback, touch [n]
Each touch of [Audio] switches between or [m], etc.
audio language and audio system. p There is no sound during slow motion play-
d Change the subtitle language (Multi-sub- back.
title) p With some discs, images may be unclear
Each touch of [S.Title] switches between the during slow motion playback.
subtitle languages. p Reversing slow motion playback is not pos-
e Frame-by-frame playback (or slow-motion sible.
playback)
= For details, refer to Frame-by-frame play-
back on this page. Searching for a desired scene
= For details, refer to Slow motion playback and starting playback from a
on this page. specified time
f Fast reverse or forward
Touching [m] or [n] to perform fast re- You can search for a desired scene by specify-
verse or forward. ing a folder or a file, and the time.
If you keep touching [m] or [n] for five p Chapter search and time search are not
seconds, fast reverse/fast forward continues possible when disc playback has been
even if you release either of these keys. To re- stopped.
sume playback at a desired point, touch
[f], [m] or [n].
80 En
Chapter
Playing a DivX 13
Playing a DivX
(folder), [File] (file), [Time] (time). Function menu
1 2
2 Touch the keys to input the desired 1 Repeating play
number or time and then touch [Enter]. Each touch of [Repeat] changes the set-
tings as follows:
! File — Repeat just the current file
! Folder — Repeat just the current folder
! Disc — Plays throughout the current
disc
p If you perform folder (file) search, fast
forward/rewind or slow motion playback,
the repeat play range changes to [Disc].
2 DVD setup adjustments
= For details, refer to Configure the DVD-
For folders, files Video/DVD-VR/DivX player. on the next
! To select 3, touch [3] and [Enter] in order. page.
! To select 10, touch [1] and [0] and [Enter] in
order.
For time (time search)
! To select 5 minutes 03 seconds, touch [5],
[0], [3] and [Enter] in order.
! To select 71 minutes 00 seconds, touch [7],
[1], [0], [0] and [Enter] in order.
p To cancel the input numbers, touch
[Clear].
En 81
Chapter
82 En
Chapter
Setting the angle icon display p Some discs do not enable changing of the
TV aspect. For details, refer to the disc’s in-
You can set the angle icon to display in structions.
En 83
Chapter
! Level 1 — Only playback of discs for chil- cally and start playback from the first chapter
dren is possible of the first title.
p If you want to change the parental level al- p This function is available for DVD-Video.
ready set, enter the registered code number p Some DVDs may not operate properly. If
and then select the parental level. this function is not fully operable, turn this
p We recommend that you keep a record of function off and start playback.
your code number in case you forget it.
p The parental lock level is recorded on the 1 Touch [DVD Setup] on the “Function”
disc. You can confirm it by looking at the menu.
disc package, the included literature or the = For details, refer to Displaying DVD Setup
disc itself. With discs that do not feature a menu on page 82.
recorded parental lock level, you cannot 2 Touch [Auto Play].
use parental lock. Touching [Auto Play] switches this setting be-
p With some discs, parental lock operates to tween [On] and [Off].
skip certain scenes only, after which normal p When [Auto Play] is [On], repeat play can-
playback resumes. For details, refer to the not be used.
disc’s instructions.
p If you forget the registered code number,
touch [Clear] 10 times on the number input
screen. The registered code number is can-
celed, letting you register a new one.
84 En
Chapter
En 85
Chapter
86 En
Chapter
You can play the compressed audio files Reading the screen
stored in the external storage device (USB,
SD). 12 3 45
p In the following description, the SD mem-
ory card, USB memory device and USB 6
En 87
Chapter
The marks shown below appears and indi- Using the touch panel keys
cates the current playback condition.
(Music)
: Repeat play
1 2
: Random play
: Scan play
3
Indicator Implication 4
All audio files in the current 5
external storage device
Media Repeat (USB, SD) are played repeat- 6
edly. This is default condi-
tion. 7
Current folder is played re-
Folder Repeat 1 Recalls equalizer curves
peatedly.
= For details, refer to Recalling equalizer
Current file is played repeat-
Track Repeat
edly.
curves on page 140.
2 Displaying the “Function” menu
All audio files in the current = For details, refer to Using the
external storage device
Media Random
(USB, SD) are played in ran-
“Function” menu on the next page.
dom order. 3 Switch the operation screen
Touching the key switches between the screen
All audio files in the current
Folder Random folder are played in random to operate music files and the screen to oper-
order. ate movie files. This touch panel key is avail-
able only when there are both audio and video
The beginning of each audio
Media Scan file is played for about 10 file in the external storage device (USB, SD).
seconds. 4 Select the previous or next folder
Touching [c] or [d] play the first playable file
The beginning of each track
Folder Scan in the current folder is on the previous or next folder. The folders that
played for about 10 seconds. there is no playable files are skipped.
5 Skip forward or backward
= For more information, refer to Using the Touching [p] skips to the start of the next
“Function” menu on the next page. file. Touching [o] once skips to the start of
p The information marked with an asterisk (*) the current file. Touching again will skip to the
is displayed only when the information has previous file.
been encoded on the compressed audio Fast rewind or forward
files. If specific information has not been Keep touching [o] or [p] to perform fast
encoded on the files, “—” is displayed in- rewind or forward.
stead. p There is no sound on fast rewind or for-
ward.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
6 Playback and Pause
Touching [f] switches between playback
and pause.
7 Displaying the map screen
88 En
Chapter
Selecting a track from the list p If the characters recorded on the com-
pressed audio file are not compatible with
The list lets you see the list of track titles or
this navigation system, those characters
folder names on a external storage device
may turn into garbled characters.
(USB, SD). If you touch a folder on the list, you
can view its contents. If you touch a track on
2 Touch [Func].
1 Touch [List].
En 89
Chapter
90 En
Chapter
You can play the video files stored in the exter- p Optimum performance of this unit may not
nal storage device (USB, SD). be obtained depending on the connected
p In the following description, the SD mem- external storage device.
ory card, USB memory device and USB p You can playback the files on a USB sto-
portable audio player are collectively re- rage device compliant with Mass Storage
ferred to as the “external storage device Class. For details about the USB Class,
(USB, SD)”. If it indicates the USB memory refer to the manual supplied with USB sto-
En 91
Chapter
Touching the key switches between the screen 1 Touch [Search] and then touch [Folder],
to operate music files and the screen to oper- [File] or [Time].
ate movie files. This touch panel key is avail-
able only when there are both audio and video
file in the external storage device (USB, SD).
4 Select the previous or next folder
Touching [c] or [d] play the first playable file
on the previous or next folder. The folders that
there is no playable files are skipped.
5 Skip forward or backward
Touching [p] skips to the start of the next
file. Touching [o] once skips to the start of
the current file. Touching again will skip to the 2 Touch the keys to input the desired
previous file. number or time and then touch [Enter].
Fast rewind or forward
Keep touching [o] or [p] to perform fast
rewind or forward.
p There is no sound on fast rewind or for-
ward.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
6 Playback and Pause
Touching [f] switches between playback
and pause. For folders, files
7 Displaying the map screen ! To select 3, touch [3] and [Enter] in order.
8 Specify the chapter you want to play back ! To select 10, touch [1] and [0] and [Enter] in
or the time to start playback by entering a order.
number For time (time search)
= For details, refer to Searching for a de- ! To select 5 minutes 03 seconds, touch [5],
sired scene and starting playback from a [0], [3] and [Enter] in order.
specified time on this page. ! To select 71 minutes 00 seconds, touch [7],
9 Stop playback [1], [0], [0] and [Enter] in order.
a Hides the touch panel keys p To clear the input numbers, touch
Touching [Hide] hides the touch panel keys. [Clear].
Touch anywhere on the LCD screen to display
the touch panel keys again.
Using the “Function” menu
Searching for a desired scene 1 Touch [USB] or [SD] on the “AV Source”
and starting playback from a menu to display the “USB” or “SD” screen.
specified time = For details concerning operations, refer to
Screen switching overview on page 18.
You can search for a desired scene by specify-
ing a folder number, file number or the time. 2 Touch the screen to display the touch
panel keys.
92 En
Chapter
3 Touch [Func].
p If the touch panel keys are not shown,
touching anywhere to display them.
1 Repeating play
Each touch of [Repeat] changes the set-
tings as follows:
! Media — Repeat all video files in the se-
lected external storage device (USB, SD)
! File — Repeat just the current file
! Folder — Repeat the current folder
p If you skip the file forward or backward
when the repeat play range in “Track”,
the repeat play range changes to
“Folder”.
En 93
Chapter
1 Source icon
Starting procedures Shows which source has been selected.
2 Shuffle play indicator
1 Touch [AV1 Input] on the “AV Settings” Appears when the shuffle play is activated.
menu to select the “iPod”. 3 Repeat play indicator
= For details, refer to Setting video input 1 Appears when the repeat play is activated.
(AV1) on page 143. : All-tracks repeat
2 Connect your iPod. : One-track repeat
The source changes and then playback will 4 Album artwork
start. Album art of the current song is displayed if it
= For details, refer to Connecting your iPod on is available.
page 16. 5 Song title (episode) indicator
p If the iPod is already connected, touch Shows the title of the current song. When the
[iPod] on the “AV Source” menu. podcast is played, the episode is displayed.
= For details concerning operations, refer to 6 Artist name (podcast title) indicator
Screen switching overview on page 18. Shows the artist name currently playing.
When the podcast is played, the podcast title
is displayed.
7 Album title (release date) indicator
Reading the screen Shows the title of the album for the song.
Music When the podcast is played, the release date
1 23 is displayed.
8 Play time indicator
Shows the elapsed playing time of the current
song.
9 Song number indicator
4
Shows the number of the song currently play-
5 ing and total number of songs in the selected
6
7
list.
a Chapter number indicator
Shows the current chapter number and total
8 9 number of chapters when the video with chap-
ters played.
94 En
Chapter
p If the characters recorded on the iPod are Touching the key displays the top category be-
not compatible with this navigation system, fore you use the category tabs. If you select
those characters may turn into garbled the song using the category tabs to play,
characters. touching the key displays the previous list.
7 Skip back or forward to another song
Touching [p] skips to the start of the next
Using the touch panel keys song. Touching [o] once skips to the start
of the current song. Touching again will skip
(Music) to the previous song. When the track with
En 95
Chapter
Search control
2 Touching or switches the selection
to the next or previous page in the list. 1 Touch your desired category tab to dis-
play the list.
3 Touch the item that you want to refine.
Refine the item until the track title is displayed 2 Touch the item that you want to refine.
on the list.
p Touching [All] on the list includes all op- 3 Touch [c] or [d] to select the character.
tions in the current list. For example, if you p “THE” or “The” and space at the beginning
touch [All] after touching [Artists], you can of the artist name will be ignored and the
proceed to next screen with selecting all ar- next character will be taken into account
tists in the list. for searching.
p After you select Artists, Albums, or
4 Touch the character key to display the
Genres, continued touching one of the list
page includes applicable options.
allows you to start playing the first songs in
the selected list and display the next op- 5 On the song (or episode) list, touch the
tions. track you want to play.
4 On the song (or episode) list, touch the
track you want to play.
p After you select the track using this func- Starting the video playback
tion, touching [Menu] displays the list pre- This navigation system can play video if an
viously selected. iPod with video capabilities is connected.
1 Touch [Video].
Searching for applicable items by
alphabet 2 Touch one of the categories in that con-
Using the search control displays the page in- tains the video you want to play.
cludes the first applicable option.
p This function is available for the alphabeti-
cal list only.
96 En
Chapter
3 Touch your desired item on the list to If you select the video from the list to play
narrow down them until the video list ap- after touching Top Menu, touching the key
pears. displays the previous list. (If you touch Top
= For details concerning operations, refer to Menu again but do not select a video, this key
Browsing for a video on this page. is disabled until you select a video with the list
next time.)
4 On the video list, touch the video you 5 Skip back or forward to another song
want to play. Touching [p] skips to the start of the next
video. Touching [o] once skips to the start
5 Touch the screen to display to touch
En 97
Chapter
Search control
2 Touching or switches the selection 2 Touch the item that you want to refine.
to the next or previous page in the list.
3 Touch [c] or [d] to select the character.
3 Touch the item that you want to refine. p “THE” or “The” and space at the beginning
Refine the item until the track title is displayed of the artist name will be ignored and the
on the list. next character will be taken into account
p Touching [All] on the list includes all op- for searching.
tions in the current list. For example, if you
4 Touch the character key to display the
touch [All] after touching [Music Videos],
page includes applicable options.
you can proceed to next screen with select-
ing all artists in the list. 5 On the video list, touch the video you
want to play.
4 On the video list, touch the video you
want to play.
p After you select the video using this func-
tion, touching [Menu] displays the list pre- Using the “Function” menu
viously selected. 1 Touch [iPod] on the “AV Source” menu
to display the control screen for “iPod”.
Searching for applicable items by = For details concerning operations, refer to
alphabet Screen switching overview on page 18.
Using the search control displays the page in-
2 Touch [Func].
cludes the first applicable option.
p This function is available for the alphabeti-
cal list only.
1 2 3 4
98 En
Chapter
En 99
Chapter
You can listen to the radio by using the naviga- Using the touch panel keys
tion system. This section describes operations
for radio (FM). 1 2
5
Reading the screen 6
1 2 3 4
1 Recalls equalizer curves
= For details, refer to Recalling equalizer
curves on page 140.
2 Displaying the “Function” menu
5 = For details, refer to Using the
6
“Function” menu on the next page.
3 Select a preset channel
[c] or [d] can be used to switch preset chan-
nels.
7 4 Perform manual tuning
To perform manual tuning, touch [c] or [d]
1 Source icon briefly. The frequencies move up or down one
Shows which source has been selected. step at a time.
2 Band indicator Perform seek tuning
Shows which band the radio is tuned to: FM1 To perform seek tuning, keep touching [c] or
to FM3. [d] for about one second and release. The
3 Preset number indicator tuner will scan the frequencies until a broad-
Shows what preset item has been selected. cast strong enough for good reception is
4 Frequency indicator found.
5 LOCAL indicator p You can cancel seek tuning by touching
Shows when local seek tuning is on. either [c] or [d] briefly.
6 STEREO indicator p If you keep touching [c] or [d], you can
Shows that the frequency selected is being skip broadcasting frequencies. Seek
broadcast in stereo. tuning will start as soon as you release
7 Signal level indicator the keys.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Select an FM band
Touch [Band] repeatedly until the desired FM
band is displayed, FM1, FM2 or FM3.
p This function is convenient for preparing
different preset lists for each band.
6 Displaying the map screen
100 En
Chapter
En 101
Chapter
102 En
Chapter
You can listen to the radio by using the naviga- a Detailed information
tion system. This section describes operations = For details, refer to Switching the display
for HD Radio™. on the next page.
p For details concerning operation, refer to
the HD Radio tuner’s operation manual.
% Touch [Digital Radio] on the “AV
Using the touch panel keys
Source” menu to display the “Digital 1 2
Radio” screen.
= For details concerning operations, refer to
Screen switching overview on page 18.
3
En 103
Chapter
Switching between the 2 The next time you touch the same pre-
detailed information display set tuning key [P1] to [P6], the radio station
frequencies are recalled from memory.
and the preset list display p You can also use [c] and [d] to recall radio
You can switch the left side of the basic screen stations assigned to preset tuning keys [P1]
according to your preference. to [P6].
2 Touch [Func].
104 En
Chapter
Storing the strongest broadcast 2 Touch [cPrev] or [Nextd] to set the sen-
frequencies sitivity.
There are four levels of sensitivity for FM and
“BSM” (best stations memory) lets you auto-
two levels for AM:
matically store the six strongest broadcast fre-
FM: 1 — 2 — 3 — 4
quencies under the preset tuning keys [P1] to
AM: 1 — 2
En 105
Chapter
You can listen to the radio by using this navi- = For details, refer to Using the
gation system. This section describes opera- “Function” menu on the next page.
tions for radio (AM). 3 Select a preset channel
c or d can be used to switch presets.
% Touch [AM] on the “AV Source” menu 4 Perform manual tuning
to display the “AM” screen. To perform manual tuning, touch [c] or [d]
= For details concerning operations, refer to briefly. The frequencies move up or down one
Screen switching overview on page 18. step at a time.
Perform seek tuning
To perform seek tuning, keep touching [c] or
Reading the screen [d] for about one second and release. The
1 2 3
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
4 either [c] or [d] briefly.
5 p If you keep touching [c] or [d], you can
skip broadcasting frequencies. Seek
tuning will start as soon as you release
the keys.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
1 Source icon operations.
Shows which source has been selected. 5 Displaying the map screen
2 Preset number indicator
Shows what preset item has been selected.
3 Frequency indicator Switching between the
4 Signal level indicator detailed information display
5 LOCAL indicator and the preset list display
Shows when local seek tuning is on.
You can switch the left side of the basic screen
according to your preference.
Using the touch panel keys
1 2
106 En
Chapter
1 2
1 When you find a frequency that you Storing the strongest broadcast
want to store in memory, keep touching a frequencies
preset tuning key [P1] to [P6] until the pre-
set number (e.g., P.ch 1) stops flashing. “BSM” (best stations memory) lets you auto-
The selected radio station has been stored in matically store the six strongest broadcast fre-
memory. quencies under the preset tuning keys [P1] to
[P6] and, once stored there, you can tune in to
2 The next time you touch the same pre- these frequencies with the touch of a key.
set tuning key [P1] to [P6], the radio station
frequencies are recalled from memory. % Touch [Start] to turn BSM on.
p You can also use [c] and [d] to recall radio BSM begins to flash. While BSM is flashing,
stations assigned to preset tuning keys [P1] the six strongest broadcast frequencies will be
to [P6]. stored under the preset tuning keys [P1] to
[P6] in order of their signal strength. When
this is complete, BSM stops flashing.
p To cancel the storage process, touch
Using the “Function” menu [Stop].
1 Touch [AM] on the “AV Source” menu p Storing broadcast frequencies with BSM
to display the “AM” screen. may replace broadcast frequencies you
= For details concerning operations, refer to have already saved by using [P1] to [P6].
Screen switching overview on page 18.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
En 107
Chapter
108 En
Chapter
You can use the navigation system to control About the logo for channel name
an XM satellite digital tuner, which is sold se- Only the logo data that is contained in the na-
parately. vigation system can be displayed for each
For details concerning operation, refer to the channel. The logo of a newly established chan-
XM tuner’s operation manuals. This section nel that is not contained cannot be displayed.
provides information on XM operations with When no logo may be displayed, the following
the navigation system which differs from that substitute icon is displayed.
described in the XM tuner’s operation man- Substitute icon
ual.
En 109
Chapter
110 En
Chapter
En 111
Chapter
112 En
Chapter
1 Touch [Memo].
1 Touch [Memo].
1 Touch [Memo].
3 Touch [Yes].
En 113
Chapter
You can use the navigation system to control a Shows what preset item has been selected.
Pioneer Sirius satellite digital tuner, which is 4 SIRIUS channel number indicator
sold separately. Shows the SIRIUS channel number that the
For details concerning operation, refer to the tuner is tuned to.
SIRIUS tuner’s operation manuals. This sec- 5 SIRIUS channel select mode indicator
tion provides information on SIRIUS opera- Shows what channel select mode has been
tions with navigation system which differs selected. You can select a channel from all
from that described in the SIRIUS tuner’s op- channels in All Ch Mode, and select a chan-
eration manual. nel from the selected category in
p When you use the SiriusConnect universal Category Mode.
tuner (sold separately) with this navigation = For details, refer to Switch the SIRIUS
system, Pioneer SIRIUS BUS INTERFACE is channel select mode on the next page.
required. For details concerning operation, 6 SIRIUS station name logo
refer to the owner’s manual of Pioneer SIR- p The message “ON THE AIR” disappears
IUS BUS INTERFACE and SiriusConnect if the navigation system cannot receive
universal tuner. SIRIUS tuner reception for some reason.
7 Variable information area
Shows various information about the broad-
Reading the screen cast channel currently being received.
= For more details about the displayed in-
All Ch Mode formation, refer to Switch the SIRIUS
1 2 3 4 display on the next page.
7
8
1 Source icon 9a b c
Shows which source has been selected.
2 SIRIUS band indicator
Shows the SIRIUS band that has been se-
lected.
3 Preset number indicator
114 En
Chapter
En 115
Chapter
3 Keep touching a preset tuning key [P1] When the memorized song is broadcast
to [P6].
A beep sounds, and a message is displayed.
The selected station has been stored in mem-
Touch [Yes] to switch to that station and listen
ory.
to that track.
The next time you touch the same preset tun-
p If the alert for the song is “Off” or [Alert
ing key [P1] to [P6] the station is recalled from
Off] is selected, no notification will be pro-
memory.
vided even when that song is broadcast.
p Up to 18 stations, 6 for each of three SIRIUS
= For details, refer to Setting the memor-
bands can be stored in memory.
ized songs on page 118.
p You can also touch [c] or [d] to recall sta-
p Notification may not be provided depend-
tions assigned to preset tuning keys [P1] to
ing on the situation of the Navigation Sys-
[P6] in the detailed information display dur-
tem.
ing “All Ch Mode”.
= For details, refer to Selecting the songs
to alert on page 118.
Using “My Mix” function p If there is even a slight difference between
The MyMix function memorizes the song title the memorized title and the title of the
and artist name of the song currently being re- track being broadcast, no notification will
ceived. When a track that matches the memor- be provided even though they are the same
ized song title and artist name is being song.
broadcast on a station other than the one you
are listening to, you will be alerted, and you Using the direct traffic
can switch the station to listen to that song.
announcement function
p The track itself is NOT downloaded; only
the song title and the artist name are mem- You can listen to a memorized traffic channel
orized. by directly calling it up with the [TRAFFIC]
(Only one station can be memorized).
116 En
Chapter
En 117
Chapter
Setting the memorized songs 3 Touch [Delete] when the song you
want to delete is displayed.
Selecting the songs to alert A message will appear asking you to confirm
Display the song title list memorized for the the deletion.
MyMix Function (MyMix list). You can change
the setting of the notification when the song is 4 Touch [Yes].
broadcast again. You can enable or disable no-
tification for each song.
Using the Game Alert function
1 Touch [Memo]. Selecting teams for Game Alert
2 Touch [c Prev] or [Next d] to select the This navigation system can alert you when
desired song. games involving your favorite sports teams are
about to start. To use this function you need to
store the teams you want to follow in advance.
1 Touch [Memo].
118 En
Chapter
En 119
Chapter
You can display “video image” output by AV1 Using the touch panel keys
Input or AV2 Input to the screen of the navi-
gation system. For details of the connection % Touch the screen to display the touch
method, refer to “Installation Manual”. panel keys.
1
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the parking brake.
120 En
Chapter
The term “external unit” refers to future Using the touch panel keys
Pioneer devices that are not currently planned
for, or to devices that allow control of basic % Touch [EXT1] or [EXT2] on the “AV
functions although they are not fully con- Source” menu to select the external unit.
trolled by the navigation system. Two external = For details concerning operations, refer to
units can be controlled by this navigation sys- Screen switching overview on page 18.
tem. When two external units are connected, 1 2
the navigation system allocates them as exter-
nal unit 1 or external unit 2.
For details of the connection method, refer to
“Installation Manual”.
3
For details concerning operation, refer to the
external unit’s operation manual. This section
provides information on external unit opera-
4
tions with the navigation system that differ
5
from those described in the external unit’s op-
eration manual. 6 7
p Operation varies depending on the external
unit connected. (In some cases, the exter- 1 Send a band command
nal unit may not respond.) Touch to send a band command to the ex-
ternal unit.
p Operation varies depending on the exter-
nal unit connected. (In some cases, the
Reading the screen external unit may not respond.)
En 121
Chapter
122 En
Chapter
Customizing preferences 25
The options in the “Navi 4 Use the tool assigned to the desired op-
Customizing preferences
tion to change the settings.
Settings” menu
1
Basic operations in the “Navi
Settings” menu
Preferences related to the navigation functions
can be set.
A method for changing the volume setting for
the navigation guidance and beep is described
here, along with an operational example.
The “Navi Settings” menu appears. 5 Touch to return to the “Navi Set-
tings” menu.
3 Touch [Sound settings].
En 123
Chapter
25 Customizing preferences
1 2 3 Time Settings
The “Time Settings” screen provides you to
set the time manually.
124 En
Chapter
Customizing preferences 25
Customizing preferences
Enables you to adjust the time difference by
The general settings related with a map screen
one hour. Touch a or b to adjust it.
can be customized.
p “Time Zone” and “Time” are activated
only when [Off] is selected. 1 Touch [Visual] on the “Navi Settings”
menu.
The “Visual Settings” screen appears.
3D Settings
The 3D map screen settings can be custo- 2 Touch [Map Settings].
mized. The “Map Settings” screen appears.
Available options;
! [Map color]
Enables you to define the map color for day-
time and nighttime use. Touch this key to
show the next screen.
“Daylight color profile:”
The daytime map color can be set. Touch
Available options;
the key and select the desired profile from
! “Landmarks”
the list.
You can select whether to draws or refrain
“Night color profile:”
from drawing graphical 3D landmarks on
The nighttime map color can be set. Touch
the map.
the key and select the desired profile from
p This function is available for AVIC-
the list.
F900BT and AVIC-F90BT.
! “Night mode”
! “Elevated Roads”
Changes the settings for the nighttime
You can select whether to draws or refrain
map.
from drawing elevated roads, interchanges,
[Automatic]:
and bridges on the map.
Switches the map color defined on “Map
! “Terrain Detail Level”
color” automatically between daytime and
[High], [Medium], [Low]:
nighttime.
Draws the terrain (e.g. mountain chains) on
[Night]:
the map with the selected fineness.
Always displays the map in the color de-
[Off]:
fined on “Night color profile:”.
Does not draw the terrain on the map.
[Day]:
Always displays the map in the color de-
fined on “Daylight color profile:”.
! “Elevation on 2D Map”
En 125
Chapter
25 Customizing preferences
You can select whether to draws or refrain 3 Touch the key on the right of “Top
from drawing the terrain with a realistic field:” to display the options.
landscape on the map, such as a green
space, water place, undulating surface.
! “Show Street Labels”
Shows or hides the street names and city
names.
! “Textured Polygons”
You can select whether to draws or refrain
from drawing the map more graphically.
! “Full Screen Cockpit”
Shows-hides the “Multi-Info window” and
“Second manoeuvre arrow”. 4 Touch your desired option.
Displayed Info
Allows you to select what options you want to
display on each part of the “Multi-Info win-
dow”.
p The estimated time of arrival is an ideal
value that the navigation system computes
internally as the route is calculated. The es-
timated time of arrival should be read just
as a reference value, and does not guaran-
tee arrival at the time indicated.
Smart Zoom
A method for changing the value of Top field:
is described here along with an operational ex- Enables the navigation system to zoom in
ample. automatically when you approach a guidance
point and zoom out after you pass through it.
You can setup the behavior while “Smart
Zoom” is activated.
p When the route is not set, the navigation
system will simply zoom in or out depend-
ing on your speed.
1 Touch [Visual] on the “Navi Settings” 2 Touch [On] or [Off] to activate or deacti-
menu. vate “Smart Zoom”.
The “Visual Settings” screen appears. Touching allows you to enter the detailed
setting screen only when [On] has been se-
2 Touch [Displayed Info]. lected.
The “Displayed Info” screen appears.
126 En
Chapter
Customizing preferences 25
Customizing preferences
Available options; Available options;
! “Zoom-in limit:” ! “Route event distance for Overview
Allows you to set the limit for zoom-in beha- mode:”
vior. Allows you to set a distance to activate
! “Zoom-out limit:” “Overview Mode”. The map starts zoom-
Allows you to set the limit for zoom-out be- ing out when the distance to the next gui-
havior. dance point is further than the distance set
! “Restore Smart Zoom” here.
Allows you to set whether “Smart Zoom” is ! “Overview zoom level:”
to be reactivated after changing the map Allows you to set the map scale for zoom-
scale, tilt, or rotation. out behavior in “Overview Mode”.
Also, enables you to set how soon “Smart
Zoom” interval will be reactivated after
completion of the operations described pre- Manage POI
viously. = For more details concerning the operation,
! “Zoom In After Find” refer to Setting the POI appearance on page
Shows the “Map Confirmation Screen” with 130.
the preset map scale after you have
searched for a position using one of the
methods on the “Destination Menu”.
Manage Track Logs
= For more details concerning the operation,
refer to Recording your travel history on
Overview Mode page 132.
Enables the navigation system to zoom out
automatically up to the selected map scale
when the next guidance point is distant.
Route
The settings related to route calculation can
1 Touch [Visual] on the “Navi Settings” be customized.
menu.
The “Visual Settings” screen appears. % Touch [Route] on the “Navi Settings”
menu.
2 Touch [On] or [Off] to activate or deacti- The “Route Settings” screen appears.
vate “Overview Mode”.
Touching allows you to enter the detailed
setting screen only when [On] has been se-
lected.
En 127
Chapter
25 Customizing preferences
128 En
Chapter
Customizing preferences 25
! “Distance Units”
Customizing preferences
Controls the unit of distance and speed
shown.
! “Coordinate display format”
Controls the format of latitude and longi-
tude shown.
! “Date format”
Controls the format of date shown.
! “Date delimiter”
Controls the delimiter format for the date
Available options;
shown.
! “Warn When Speeding”
! “Time format”
Establishes whether or not to enable the ex-
Controls the time format shown.
cessive speed warnings for when you ex-
ceed the speed limit.
Restore Factory Settings
CAUTION
Resets various settings registered to the navi-
The speed limit is based on the map data-
gation system and restores them to the default
base. The speed limit in the database may
or factory settings.
not match the actual speed limit of the cur-
p Some data remains. Read Returning the na-
rent road. This is not a definite value. Be
vigation system to the default or factory set-
sure to drive according to the actual speed
tings before you operate this function.
limit.
= For more detailed information about the
! “Speeding Tolerance” items to be deleted, refer to Returning
Sets the tolerance for the speed limit the navigation system to the default or
with a percentage. factory settings on page 153.
Demo Mode
This is a demonstration function for retail
stores. After a route is set, touching this key to
start the simulation of the route guidance.
En 129
Chapter
25 Customizing preferences
2 Touch [Maps].
Touching [Maps] allows you to view the infor-
mation regarding the map database in detail.
After that, touching the desired item on the
list allows you to view more detailed informa-
tion about the selected map database.
130 En
Chapter
Customizing preferences 25
3 Touch the desired category that you Also applies this visibility to all sub-cate-
Customizing preferences
want to display. gories belonging to this category.
[Off]:
Does not apply this visibility to all sub-cate-
gories belonging to this category.
! “Icon:”
Touching the key shows the options avail-
able. Touch one of them to set the desired
icon.
! [Remove]:
Touching the key allows you to delete the
selected category.
If there are more detailed categories within the p [Remove] is available only for POI cate-
selected category, repeat this step as many gories that are created on this naviga-
times as necessary. tion system.
If there aren’t anymore detailed categories, a
blank list appears. In this case, you can only
create the new category by touching [New Creating new categories
Group]. If your customized POI does not match any
pre-installed categories, creating a new cate-
4 Touch [Edit] on the right of the desired gory allows you to edit your customized POI so
sub-category to set the appearance. that it can belong to this newly-created cate-
gory.
5 Touch the desired key to customize it.
p If the custom POI is found on an external
storage device (USB, SD), the navigation
system will show a POI list which includes
them.
En 131
Chapter
25 Customizing preferences
If there aren’t anymore detailed categories, a If there are more detailed categories within the
blank list appears. In this case, touching selected category, repeat this step until the de-
[New Group] allows you to create a new cate- sired POI appears.
gory.
4 Touch the desired POI.
4 Touch [New Group] at the screen where The “Edit POI” screen appears.
you want to create a new category.
5 Touch the desired key to customize it.
5 Enter the category name and touch
[Done] to complete the entry.
Available options;
! “Group:”
The category that the item currently se-
Editing your customized POI lected belongs to can be changed. Touch-
ing the key shows the options available.
If you have already stored the customized POI,
Touch one of them to set the desired cate-
you can edit the POI property.
gory.
p If the custom POI is found on an external
! “POI Name:”
storage device (USB, SD), the navigation
Touching the key displays the screen for en-
system will show a POI list which includes
tering a new POI name. Enter the name
them.
and then touch [Done] to complete the
1 Touch [Visual] on the “Navi Settings” entry.
menu. ! “Icon:”
The “Visual Settings” screen appears. Touching the key shows the options avail-
able. Touch one of them to set the desired
2 Touch [Manage POI]. icon.
! [Remove]:
3 Touch the desired category for editing. Touching the key allows you to delete the
selected POI.
p [Remove] is available only for POIs that are
created on this navigation system.
p The POI address is not editable.
132 En
Chapter
Customizing preferences 25
Activating track logger temporarily 3 Touch the desired track log on the list.
Customizing preferences
One-time activation is useful if you want to More details about the track log appears.
create a log only for that trip.
4 Touch the desired key to operate it.
1 Touch [Visual] on the “Navi Settings”
menu.
The “Visual Settings” screen appears.
En 133
Chapter
25 Customizing preferences
4 Touch the desired key to operate it. 2 Touch the key next to “Address:”.
134 En
Chapter
Customizing preferences 25
Customizing preferences
guage:”.
En 135
Chapter
25 Customizing preferences
1 Create a folder named “Pictures” on the to the shift lever position after touching [Rear-
top-most directory of the external storage View] on the “AV Source” menu. [RearView]
device (USB, SD) and store the picture files is useful if you want to monitor an attached
in this folder. trailer, etc.
136 En
Chapter
Customizing preferences 25
Customizing preferences
positions of the touch panels The adjusted position data will be saved.
p Do not turn off the engine while saving the
(touch panel calibration) adjusted position data.
If you feel that the touch panel keys on the
screen deviate from the actual positions that 5 Touch [OK].
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p Make sure to use the supplied stylus for ad-
justment and gently touch the screen. If
you press the touch panel forcefully, the
touch panel may be damaged. Do not use
a sharp pointed tool such as a ballpoint
pen or a mechanical pen. Otherwise the
screen may become damaged.
En 137
Chapter
25 Customizing preferences
Selecting the color from the preset Each time you touch [+] or [–] increases or de-
colors creases the value of selected item. +31 to +00
is displayed as the value is increased or de-
1 Touch [Illumi Color] on the “System Set-
creased.
tings” menu.
= For details, refer to Displaying the “System
Settings” menu on page 134.
2 Touch desired color.
Current color balance
138 En
Chapter
Customizing preferences 25
The “AV Sound” menu options 2 Touch [a] or [b] to adjust front/rear
Customizing preferences
speaker balance.
Displaying the “AV Sound” menu Each time you touch [a] or [b], the front/rear
1 Press MENU button to display the “Top speaker balance moves towards the front or
Menu”, and then touch [Settings]. the rear.
“Front:15” to “Rear:15” is displayed as the
2 Touch [AV Sound]. front/rear speaker balance moves from front to
The “AV Sound” menu appears. rear.
Setting “Front:” and “Rear:” to “0” is proper if
two speaker system being used.
When the rear output setting is [Rear SP
Sub W], you cannot adjust front/rear speaker
balance.
= Refer to Setting the rear output on page 144.
3 Touch [c] or [d] to adjust left/right
speaker balance.
Each time you touch [c] or [d], the left/right
speaker balance moves towards the left or the
right.
En 139
Chapter
25 Customizing preferences
140 En
Chapter
Customizing preferences 25
! Q: Adjusting loudness
Customizing preferences
You can select the details of the curve char- Loudness compensates for deficiencies in the
acteristics. (The following figure shows the low- and high-sound ranges at low volume.
characteristic image.)
1 Touch [Loudness] on the “AV Sound”
menu.
= For details, refer to Displaying the “AV
Sound” menu on page 139.
En 141
Chapter
25 Customizing preferences
5 Touch [+] or [–] next to “Frequency” to ! CD, ROM, DivX (for AVIC-F900BT and AVIC-
select cut-off frequency. F90BT)
Each time you touch [+] or [–], cut-off frequen- ! CD, ROM (for AVIC-F700BT and AVIC-
cies are selected in the following order: F7010BT)
50 Hz — 63 Hz — 80 Hz — 100 Hz — 125 Hz ! XM and SIRIUS
Only frequencies lower than those in the se- ! AV1 and AV2
lected range are output from the subwoofer. ! EXT1 and EXT2
p The different source volume level can be set
between iPod and USB.
Using the high pass filter p For AVIC-F900BT and AVIC-F90BT, the
When you do not want low sounds from the source volume level can be set to DVD-V
subwoofer output frequency range to play and DVD-VR respectively as well as differ-
from the front or rear speakers, activate HPF ently from the other sources of the built-in
(high pass filter). Only frequencies higher than DVD drive previously mentioned.
those in the selected range are output from
the front or rear speakers.
Enhancing bass (Bass Booster)
1 Touch [HPF] on the “AV Sound” menu. The “Bass Booster” enhances bass sounds,
= For details, refer to Displaying the “AV which can be muted by driving noise.
Sound” menu on page 139.
1 Touch [Bass Booster] on the “AV
2 Touch [HPF] to select cut-off frequency. Sound” menu.
Each time you touch [HPF] selects cut-off fre- = For details, refer to Displaying the “AV
quencies in the following order: Sound” menu on page 139.
Off — 50 Hz — 63 Hz — 80 Hz — 100 Hz —
125 Hz 2 Touch [+] or [-] to adjust the range from
0 to 6.
142 En
Chapter
Customizing preferences 25
Customizing preferences
menu.
= For details, refer to Displaying the “AV Set-
tings” menu on the previous page.
Each touch of [AV2 Input] changes the set-
tings as follows:
! Off — No video component is connected
! Video — External video component
p Use AV2 Input when connecting CD-RM10
(sold separately) through the external video
component.
En 143
Chapter
25 Customizing preferences
144 En
Chapter
Customizing preferences 25
Customizing preferences
“English” on “Program language:”, select
[Off].
p During transfer, iPod operations (such as
[Shuffle], [Menu], or [Video]) are not avail-
able.
p If you select “Off”or acquiring the informa-
tion from connected iPod has not com-
pleted, the part of voice commands related
to iPod operation cannot be used.
1 Touch [VR Catalog Mode] on the “AV
Settings” menu.
= For details, refer to Displaying the “AV Set-
tings” menu on page 142.
En 145
Chapter
146 En
Chapter
En 147
Chapter
Basic commands
Voice commands and operations
Back d Returns the previous screen.
Cancel d Cancels the voice operation.
Help d Outputs the brief operating instruction by voice.
148 En
Chapter
Show playlists d Displays the playlist together with sub-screen to continue the voice operation. d Touch the de-
sired item on the list or say the desired voice commands.
Show the playlist <Playlist name> d Displays the song list of the selected playlist together with sub-screen to con-
(Note 1) The voice commands is available only when the selection list is displayed.
En 149
Chapter
(Note 2) If the entry has multiple phone number data, selection list may appear. In such case, say the type of phone
number or touch the one of listed item that you want to dial.
(Note 3) If there is no corresponding type on the entry, the system may suggest you other phone numbers of the entry.
In such case, say the type of phone number or touch the one of listed item that you want to dial.
(Note 4) Touching the item on the screen also enables you to select the desired list.
150 En
Chapter
En 151
Chapter
27 Other functions
152 En
Chapter
Other functions 27
Other functions
the default or factory settings. There are three
methods to clear user data, and the situations
and the cleared content are different for each
method. For information regarding the content
that is cleared by each method, see the list
presented later.
En 153
Chapter
27 Other functions
(*1) All settings including the setting on the “Function” menu are to be deleted.
154 En
Appendix
Appendix
Troubleshooting
If you have problems operating your navigation system, refer to this section. The most common
problems are listed below, along with likely causes and solutions. While this list is not comprehen-
sive, it should answer your most common problems. If a solution to your problem cannot be
found here, contact your dealer or the nearest authorized Pioneer service facility.
Problems with the navigation screen
Appendix
Symptom Cause Action (See)
The power doesn’t turn on. The Leads and connectors are incor- Confirm once more that all connections are
navigation system doesn’t oper- rectly connected. correct.
ate. The fuse is blown. Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install a cor-
rect fuse with the same rate.
Noise and other factors are causing Press RESET button. (Page 11)
the built-in microprocessor to oper-
ate incorrectly.
You cannot position your vehicle The quality of signals from the GPS Check the GPS signal reception and the posi-
on the map without a significant satellites is poor, causing reduced tion of the GPS antenna if necessary, or con-
positioning error. positioning accuracy. Such a loss of tinue driving until reception improves. Keep
signal quality may occur for the fol- the antenna clear.
lowing reasons:
• The GPS antenna is in an unsuita-
ble location.
• Obstacles are blocking signals
from the satellites.
• The position of satellites relative to
your vehicle is inadequate.
• Signals from the GPS satellites
have been modified to reduce accu-
racy. (GPS satellites are operated by
the US Department of Defense, and
the US government reserves the
right to distort positioning data for
military reasons. This may lead to
greater positioning errors.)
• If a vehicle phone or cellular
phone is used near the GPS anten-
na, GPS reception may be lost tem-
porarily.
Something covers the GPS antenna. Do not cover the GPS antenna with spray
paint or vehicle wax, because this may block
the reception of GPS signals. Snow buildup
can also degrade the signals.
Signals from the vehicle’s speed Check that the cables are properly connected.
pulse are not being picked up prop- If necessary, consult the dealer that installed
erly. (This information is intended the system.
for AVIC-F900BT and AVIC-F90BT.)
En 155
Appendix
Appendix
The navigation system may not be Check that the navigation system is securely
You cannot position your vehicle mounted securely in your vehicle. mounted and, if necessary, consult the dealer
on the map without a significant that installed the system.
positioning error.
The navigation system is installed Confirm the installation angle. (The naviga-
with an extreme angle exceeding tion system must be installed within the al-
the installation angle limitations. lowed installation angle. For details, refer to
“Installation Manual”.)
Indication of the position of your ve- Check whether or not the reverse gear signal
hicle is misaligned after a U-turn or input lead (violet) is connected properly. (The
reversing. navigation system works properly without the
lead connected, but positioning accuracy will
be adversely affected.)
The map color does not switch [Night mode] is set to [Day]. Check [Night mode] setting and make sure
automatically between daytime [Automatic] is selected. (Page 125)
and nighttime. The orange/white lead is not con- Check the connection.
nected.
The screen is too bright. An improper value has been set on Check the settings.
“Brightness”.
The display is very dim. [Night] is selected in “Night Check the setting of [Night mode] and select
mode”. [Automatic] or [Day]. (Page 125)
No sounds of AV source are pro- The volume level is low. Adjust the volume level.
duced.
The attenuator or mute is on. Turn the attenuator or mute off.
The volume level will not rise.
A speaker lead is disconnected. Check the connection.
Adjusting the volume of naviga- You cannot adjust these with Turn the volume up or down according to
tion guidance and beeps is not MULTI-CONTROL. [Sound settings] on the “Navi Settings”
possible. menu. (Page 60)
The person on the other end of The voice from the person on the Use the following methods to reduce the
the phone call cannot hear the other end of the phone call is output echo:
conversation due to an echo. from the speakers and then picked —Lower the volume on the receiver
up by the microphone again, creat- —Have both speakers pause slightly before
ing an echo. speaking
There’s no picture. The parking brake cord is not con- Connect the parking brake cord, and apply
nected. the parking brake.
The parking brake is not applied. Connect the parking brake cord, and apply
the parking brake.
The backlight of the LCD panel is Turn on the backlight. (Page 138)
turned off.
“Rear display” picture disap- The source disc being listened to in Before ejecting the disc, switch the source.
pears. (This information is in- the navigation system has been This problem may occur when certain con-
tended for AVIC-F900BT and ejected. nection methods are used.
AVIC-F90BT.) There is a problem with the “Rear Check the “Rear display” and its connection.
display”, for example a faulty wiring
connection.
The AV source that cannot output to Select the appropriate AV source.
the rear display is selected.
156 En
Appendix
Appendix
The setting for the rear view camera Select the appropriate setting for the rear
Nothing is displayed and the is incorrect. view camera.
touch panel keys cannot be
The shift lever was placed in [R] Press MAP button, and then press MENU
used.
when the rear view camera was not button to return to the “Top Menu” and then
connected. select the correct polarity setting for [Back
Camera]. (Page 136)
There is no response when the The touch panel keys deviate from Perform the touch panel calibration. (Page
Appendix
touch panel key are touched or the actual positions that respond to 137)
a different key responds. your touch for some reason.
En 157
Appendix
Appendix
The aspect setting is incorrect for Select the appropriate setting for that image.
The picture is stretched, the as- the display. (Page 143, Page 83)
pect is incorrect.
A parental lock message is dis- Parental lock is on. Turn parental lock off or change the level.
played and DVD playback is not (Page 83)
possible.
Parental lock for DVD playback The code number is incorrect. Input the correct code number. (Page 83)
cannot be canceled.
Playback is not with the audio The DVD playing does not feature Switching to a selected language is not possi-
language and subtitle language dialog or subtitles in the language ble if the language selected in [DVD Setup]
settings selected in [DVD selected in [DVD Setup]. is not recorded on the disc.
Setup].
The picture is extremely unclear/ The disc features a signal to prohibit Since the navigation system is compatible
distorted and dark during play- copying. (Some discs may have with the copy guard analog copy protect sys-
back. this.) tem, when playing a disc that has a signal
prohibiting copying, the picture may suffer
from horizontal stripes or other imperfections
when viewed on some displays. This does not
mean the navigation system is malfunction-
ing.
Cannot be operated. The iPod is frozen. ! Reconnect the iPod with the USB interface
cable for iPod.
! Update the software version of iPod.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and cut
off the engine. Turn the ignition key back to
“Acc off”. Then start the engine again, and
turn the power to the navigation system back
on. If this does not solve the problem, press
RESET button on the navigation system.
! Update the software version of iPod.
158 En
Appendix
Appendix
Appendix
Message When What to do (See)
There is no "Pictures" folder. Cannot load the image because Use the appropriate data and store the data
Please create /Pictures/ folder “Pictures” folder is not found in the properly. (Page 135)
and store the appropriate file inserted external storage device.
images to be uploaded in that
“Pictures” folder exists on the exter- Use the appropriate data and store the data
Folder. nal storage device (USB, SD) but properly. (Page 135)
there is no loadable data in the
folder.
Data Read error. Failed to read the data for some rea- Use the appropriate data and store the data
son. properly. (Page 135)
The file is corrupt The data is damaged or an attempt Use the appropriate data and store the data
was made to set an image file that properly. (Page 135)
was not made to specifications as
the splash screen.
Connection failed. The cellular phone’s Bluetooth wire- Activate the target phone’s Bluetooth wire-
less technology is turned off. less technology.
The cellular phone is paired (con- Cancel the pairing (connection) and retry.
nected) with another device.
Rejection has been received from Operate the target phone and accept the con-
the cellular phone. nection request from the navigation system.
(Furthermore, check the connection settings
on your cellular phone.)
The target cellular phone can not be Check whether your cellular phone is acti-
found. vated and, whether the distance to your cellu-
lar phone is not too far.
Could not find any available No available phone exists in the sur- ! Activate the target phone’s Bluetooth wire-
phone. roundings when the system less technology.
searches for connectable cellular ! Check whether your cellular phone is acti-
phones featuring Bluetooth wireless vated and, whether the distance to your cellu-
technology. lar phone is not too far.
Dataloading failed. If you transferred the data from your ! Select just a suitable item, format, and then
cellular phone in a format can not retry. (Page 63)
be received with navigation system. ! Connect your cellular phone with another
method again and retry. (Page 52)
Your mobile phone can not Connected cellular phone has no Depending on the cellular phone, phone
support this feature. compatibility with the phone book book transfer may not be available.
transfer function of this navigation
system.
En 159
Appendix
Appendix
160 En
Appendix
Appendix
Electrical or mechanical Turn the ignition switch OFF and back ON, or
Reading error switch to a different source, then back to the
(ERROR-10, 11, 12, 15, 17, 30, CD player.
A0)
Reading error The inserted disc does not contain Replace disc.
(ERROR-15) any data.
Reading error The CD format cannot be played Replace disc.
Appendix
(ERROR-23) back.
Reading error The inserted disc does not contain Replace disc.
(ERROR-22) any files that can be played back
Non-playable tracks are The inserted disc contains files that Replace disc.
skipped. are protected by DRM
Impossible to play all tracks. All the files on the inserted disc are Replace disc.
secured by DRM.
SD/USB/iPod
Message Cause Action (See)
Non-playable tracks are Files that are protected by digital The protected files are skipped.
skipped. rights management.
Impossible to play all tracks. All the files on the inserted external Store playable files.
(PROCETED DISC) storage device are secured by DRM.
An error occurred on USB con- The USB connector or USB cable is Confirm that the USB connector or USB
nection. USB devices are not short-circuited. cable is not caught in something or da-
available to use and iPod maged.
power supply is also unavail- The connected USB storage device Disconnect the USB storage device and do
able. consumes more than 500 mA (maxi- not use it. Turn the ignition switch to OFF,
mum allowable current). then to ACC or ON and then connect the
compliant USB storage device.
The USB interface cable for iPod is Confirm that USB interface cable for iPod or
short-circuited. USB cable is not caught in something or da-
maged.
Connected iPod is not sup- The iPod is not compatible with this Use an iPod with a compatible version.
ported. Please check instruc- navigation system.
tion manual.
iPod connection failed. Please Communication failure • Disconnect the cable from iPod. Once iPod
reconnect. main menu is displayed, connect the cable
again.
• If the message appears frequently, consult
your dealer.
Data to control iPod by voice iPod function is restricted because • Wait until the information acquisition
is being created. During this the navigation system is trying to finishes.
process, iPod function may be acquire the information needed to • Deactivate the information acquisition if de-
restricted. operate iPod with voice commands sired. (Page 144)
from the iPod currently connected.
Voice Synching…My voice Voice operation is restricted be- • Wait until the information acquisition
system will be busy until I’m cause the navigation system is try- finishes.
finished, but you can use the ing to acquire the information • Deactivate the information acquisition if de-
touch interface needed to operate iPod with voice sired. (Page 144)
commands from the iPod currently
connected.
En 161
Appendix
Appendix
Other sources
Message Cause Action (See)
System detected improper Parking brake lead is incorrectly Confirm once more that their connections are
connection of Parking Brake connected. correct.
lead. Please check your con-
figuration for safety. Please
see Operation Manual for
more information regarding
safe operation.
UPDATING The selected channel is not in- Select another channel.
cluded in your subscription.
Radio is being updated with the lat- Wait until the encryption code is fully up-
est encryption code. dated.
162 En
Appendix
Appendix
Appendix
speed pulse. So you connect the speed pulse
without fail to get the accuracy of positioning.
Positioning by GPS p The position of the speed detection circuit
vary depending on the vehicle model. For
The Global Positioning System (GPS) uses a
details, consult your authorized Pioneer
network of satellites orbiting the Earth. Each
dealer or an installation professional.
of the satellites, which orbit at a height of
p Some types of vehicles may not output a
21 000 km, continually broadcasts radio sig-
speed signal while driving at just a few kilo-
nals giving time and position information. This
meters per hour. In such a case, the current
ensures that signals from at least three can be
location of your vehicle may not be dis-
picked up from any open area on the earth’s
played correctly while in a traffic conges-
surface.
tion or in a parking lot.
The accuracy of the GPS information depends
on how good the reception is. When the sig-
nals are strong and reception is good, GPS How do GPS and “Dead
can determine latitude, longitude and altitude Reckoning” work together?
for accurate positioning in three dimensions.
For maximum accuracy, your navigation sys-
But if signal quality is poor, only two dimen-
tem continually compares GPS data with your
sions, latitude and longitude, can be obtained
estimated position as calculated from the data
and positioning errors are somewhat greater.
of built-in sensor. However, if only the data
from the built-in sensor is available for a long
period, positioning errors are gradually com-
pounded until the estimated position becomes
unreliable. For this reason, whenever GPS sig-
nals are available, they are matched with the
data of the built-in sensor and used to correct
it for improved accuracy.
p If you use chains on your wheels for winter
driving or put on the spare wheel, errors
may suddenly increase because of differ-
ence in wheel diameter. In such case,
pressing RESET button initialize the sensor
Positioning by “Dead Reckoning” status and it may recover the accuracy to
The built-in sensor in the navigation system normal condition.
also calculates your position. The current loca-
tion is measured by detecting driving distance
with the speed pulse, the turning direction
with the “Gyrosensor” and inclination of the
road with the “G sensor”.
En 163
Appendix
Appendix
164 En
Appendix
Appendix
Appendix
! If you make a shallow turn. ! If the road has connected hairpin bends.
! If you take a recently opened road that is ! If you are driving on a long, straight road or
not on the map. a gently curving road.
En 165
Appendix
Appendix
! If you are on a steep mountain road with ! If trees or other obstacles block the GPS
many height changes. signals for a considerable period.
! If you enter or exit a multi-storey parking lot ! If you drive very slowly, or in a start-and-
or similar structure using a spiral ramp. stop manner, as in a traffic congestion.
! If your vehicle is turned on a turntable or si- ! If you join the road after driving around a
milar structure. large parking lot.
166 En
Appendix
Appendix
Appendix
streets and street closures may not be taken into ! The number of traffic circle exits displayed
consideration. For example, if a street is open dur- on the screen may differ from the actual
ing the morning only, but you arrive later, it would number of roads.
be against the traffic regulations so you cannot
drive along the set route. When driving, please
Route highlighting
follow the actual traffic signs. Also, the system
may not know some traffic regulations. ! Once set, the route is highlighted in bright
color on the map.
! The calculated route is one example of the ! The immediate vicinity of your starting
route to your destination decided by the na- point and destination may not be high-
vigation system while taking the type of lighted, and neither will areas with particu-
streets or traffic regulations into account. It larly complex road layouts. Consequently,
is not necessarily an optimum route. (In the route may appear to be cut off on the
some cases, you may not be able to set the display, but voice guidance will continue.
streets you want to pass. If you need to
pass a certain street, set the waypoint on Supplemental information about
that street.) directions
! If the destination is too far, there may be in-
stances where the route cannot be set. (If Symbol Meanings
you want to set a long-distance route going Highway
across several areas, set waypoints along
the way.) Motorway exit left/right
! During voice guidance, turns and intersec-
tions from the freeway are announced. Roudabout (clockwise and anti-clock-
However, if you pass intersections, turns, wise)
and other guide points in rapid succession, Ferry (start and end)
some may delay or not be announced.
! It is possible that guidance may direct you Car only road (start and end)
off a freeway and then back on again.
! In some cases, the route may require you Car train (start and end)
to travel in the opposite direction to your
current heading. In such cases, you are in- Other information
structed to turn around, so please turn
around safely by following the actual traffic
rules.
! In some cases, a route may begin on the
opposite side of a railway or river from your
actual current location. If this happens,
drive towards your destination for a while,
and try route calculation again.
En 167
Appendix
Appendix
Closed/blocked roads
Road works
! Condensation may temporarily impair the
Road narrows, lane closures built-in drive’s performance. Leave it to ad-
just to the warmer temperature for about
Warnings, other dangers one hour. Also, wipe any damp discs with a
soft cloth.
Bad weather condition ! Playback of discs may not be possible be-
cause of disc characteristics, disc format,
Police ahead recorded application, playback environ-
ment, storage conditions and so on.
! Road shocks may interrupt disc playback.
! Read the precautions for discs before
using them.
Handling and care of the disc
Some basic precautions are necessary when Ambient conditions for playing
handling your discs. a disc
! At extremely high temperatures, a tempera-
Built-in drive and care ture cutout protects this product by switch-
ing it off automatically.
! Use only conventional, fully circular discs.
! Despite our careful design of the product,
Do not use shaped discs.
small scratches that do not affect actual
operation may appear on the disc surface
as a result of mechanical wear, ambient
conditions for use or handling of the disc.
This is not a sign of the malfunction of this
product. Consider it to be normal wear and
! Use 12-cm or 8-cm disc. Do not use an tear.
adapter when playing 8-cm discs.
! Do not use cracked, chipped, warped, or
otherwise damaged discs as they may da-
mage the built-in drive.
! Do not touch the recorded surface of the
discs.
! Store discs in their cases when not in use.
168 En
Appendix
Appendix
Appendix
! Please refer to the manufacturer for more
detailed information about DualDiscs.
En 169
Appendix
Appendix
170 En
Appendix
Appendix
! Firmly secure the USB storage device when ! Plays all versions of DivX® video (including
driving. Do not let the USB storage device DivX® 6) with standard playback of DivX®
fall onto the floor, where it may become media files.
jammed under the brake or gas pedal. ! For more details about DivX, visit the follow-
! There may be a slight delay when starting ing site:
playback of audio files encoded with image http://www.divx.com/
data.
DivX subtitle files
Appendix
! Depending on the USB storage devices
connected to this navigation system, noise ! Srt format subtitle files with the extension
may be generate on the radio. “.srt” can be used.
! Do not connect anything other than the ! Only one subtitle file can be used for each
USB portable audio player/USB memory DivX file. Multiple subtitle files cannot be
device. associated.
The sequence of audio files on USB mem- ! Subtitle files that are named with the same
ory character string as the DivX file before the
For USB portable audio players, the sequence extension are associated with the DivX file.
is different from that of USB memory device The character strings before the extension
and depends on the player. must be exactly the same. However, if there
is only one DivX file and one subtitle file in
a single folder, the files are associated even
SD memory card and SDHC memory card if the file names are not the same.
! For more details about SD memory card ! The subtitle file must be stored in the same
compatibility with this navigation system, folder as the DivX file.
refer to Specifications on page 187. ! Up to 255 subtitle files may be used. Any
more subtitle files will not be recognized.
! Up to 64 characters can be used for the
Handling guidelines and
name of the subtitle file, including the ex-
supplemental information tension. If more than 64 characters are
! There is no compatibility for Multi Media used for the file name, the subtitle file may
Card (MMC). not be recognized.
! Copyright protected files cannot be played ! The character code for the subtitle file
back. should comply with ISO-8859-1. Using char-
acters other than ISO-8859-1 may cause the
Notes unique to DivX files characters to be displayed incorrectly.
! The subtitles may not be displayed correctly
! Only DivX files downloaded from DivX part-
if the displayed characters in the subtitle
ner site are guarantee for proper operation.
file include control code.
Unauthorized DivX file may not operate
! For materials that use a high transfer rate,
properly.
the subtitles and video may not be comple-
! DRM rental files cannot be operated until
tely synchronized.
playing back is started.
! If multiple subtitles are programmed to dis-
! The navigation system corresponds to a
play within a very short time frame, such as
DivX file display of up to 1 590 minutes 43
0.1 seconds, the subtitles may not be dis-
seconds. Search operations beyond this
played at the correct time.
time limit are prohibited.
! DivX VOD file playback requires supplying
the ID code of this navigation system to the
DivX VOD provider. Regarding the ID code,
refer to Displaying your DivX® VOD registra-
tion code on page 84.
En 171
Appendix
Appendix
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
ISO9660 level 1,
ISO9660 level 1,
ISO9660 level 2,
File system ISO9660 level 2, FAT16/FAT32
Romeo, Joliet
Romeo and Joliet
and UDF 1.02
Maximum number FAT32: No limit.
99 255
of folders FAT16: 512 (including files)
Maximum number FAT32: No limit.
999 3 500
of files FAT16: 512 (including folders)
MP3, WMA, MP3, WMA, AAC, WAV, AVI,
Playable file types MP3, WMA, AAC, DivX
AAC, WAV MPEG-4
MP3 compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .mp3
Bit rate 8 kbps to 320 kbps (CBR), VBR
16 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for empha-
Sampling frequency 16 kHz to 48 kHz
sis)
ID3 tag ID3 Tag Ver. 1.0, 1.1, 2.2, 2.3 ID3 Tag Ver. 1.0, 1.1, 2.3
Notes:
! Ver. 2.x of ID3 Tag is given priority when both Ver. 1.x and Ver. 2.x exist.
! There is no compatibility with the followings:
MP3i (MP3 interactive), mp3 PRO, m3u playlist
172 En
Appendix
Appendix
WMA compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .wma
Appendix
Ver. 9: 5 kbps to 320 kbps (CBR),
48 kbps to
VBR
Bit rate 320 kbps (CBR), 5 kbps to 320 kbps (CBR), VBR
Ver. 7 or 8: 128 kbps to 192 kbps
VBR
(CBR), VBR
Sampling frequency 32 kHz to 48 kHz 8 kHz to 48 kHz
Note:
! There is no compatibility with the followings:
Windows Media Audio 9 Professional, Lossless, Voice
WAV compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .wav .wav
Linear PCM
Format (LPCM), MS Linear PCM (LPCM), IMA-ADPCM
ADPCM
LPCM: 16 kHz to
48 kHz AVIC-F900BT and AVIC-F90BT can- LPCM: 16 kHz to 48 kHz
Sampling frequency MS ADPCM: not play WAV files on the built-in IMA-ADPCM: 22.05 kHz and
22.05 kHz and DVD drive. 44.1 kHz
44.1 kHz
LPCM: 8 bits
and 16 bits LPCM: 8 bits and 16 bits
Quantization bits
MS ADPCM: IMA-ADPCM: 3 bits and 4 bits
4 bits
Note:
The sampling frequency shown in the display may be rounded.
En 173
Appendix
Appendix
AAC compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .m4a
Bit rate 16 kbps to 320 kbps (CBR) 8 kbps to 320 kbps (CBR)
11 kHz to
Sampling frequency 8 kHz to 44.1 kHz
44.1 kHz
Notes:
! The navigation system plays back AAC files encoded by iTunes®.
! There is no compatibility with the followings:
Apple Lossless, files encoded with VBR
DivX compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .avi/.divx
Profile (DivX ver- Home Theater Ver. 3.11/Ver. 4.x/
sion) Ver. 5.x/Ver. 6.x
Compatible audio
MP3, Dolby Digital
codec AVIC-F700BT
DivX files on the external storage
and AVIC-
Bit rate (MP3) 8 kbps to 320 kbps (CBR), VBR device (USB, SD) cannot be played.
F7010BT cannot
Sampling frequency play DivX files. 16 kHz to 48 kHz (32 kHz, 44.1 kHz,
(MP3) 48 kHz for emphasis)
Maximum image
720 × 576 pixels.
size
Maximum file size 4 GB
Notes:
! There is no compatibility with the followings:
DivX Ultra format, DivX files without video data, DivX files encoded with LPCM (Linear PCM) audio codec
! Depending on the file information composition such as the number of audio streams, there may be a slight
delay in the start of playback on discs.
! If a file contains more than 4 GB, playback is stopped halfway.
! Some special operations may be prohibited because of the composition of DivX files.
! Files with high transfer rates may not be played back correctly. The standard transfer rate is 4 Mbps for CDs and
10.08 Mbps for DVDs.
174 En
Appendix
Appendix
AVI compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .avi
Appendix
Compatible video
MPEG-4
codec
Compatible audio AVI files cannot be played on the built-in drive. ADPCM
codec
Image size: VGA (640 x 480)
Recommended
Bit rate: 480 kbps
video specifications
Frame rate: 24 fps
MPEG-4 compatibility
DVD-R/-RW/-
CD-R/-RW CD-R/-RW USB storage SD memory
R DL
Media AVIC-F700BT, AVIC-F900BT, device card
AVIC-F900BT,
AVIC-F7010BT AVIC-F90BT (All models) (All models)
AVIC-F90BT
File extension .mp4
Compatible video
MPEG-4
codec
Compatible audio MPEG-4 files cannot be played on the built-in drive. AAC
codec
Image size: VGA (640 x 480)
Recommended
Bit rate: 480 kbps
video specifications
Frame rate: 24 fps
En 175
Appendix
Appendix
176 En
Appendix
Appendix
Appendix
Plays all versions of DivX® video (including
DivX® 6) with standard playback of DivX®
media files.
p DivX, DivX Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.
SDHC Logo is a trademark.
About AAC
About WMA AAC is short for Advanced Audio Coding and
refers to an audio compression technology
standard used with MPEG-2 and MPEG-4. Sev-
eral applications can be used to encode AAC
files, but file formats and extensions differ de-
pending on the application which is used to
encode. This unit plays back AAC files en-
The Windows Media™ logo printed on the box coded by iTunes® version 4.6.
indicates that this unit can play back WMA p iTunes is a trademark of Apple Inc., regis-
data. WMA is short for Windows Media Audio tered in the U.S. and other countries.
and refers to an audio compression technol-
ogy that is developed by Microsoft
Corporation. WMA data can be encoded by
using Windows Media Player version 7 or Detailed information
later. Windows Media and the Windows logo regarding connectable iPods
are trademarks or registered trademarks of
Microsoft Corporation in the United States CAUTION
and/or other countries. ! Pioneer accepts no responsibility for data lost
on the iPod even if that data is lost while
using the navigation system.
! Do not leave the iPod in direct sunlight for ex-
About DivX tended amounts of time. Extended exposure
to direct sunlight can result in iPod malfunc-
tion due to the resulting high temperature.
! Do not leave the iPod in any location with
high temperatures.
! Firmly secure the iPod when driving. Do not
let the iPod fall onto the floor, where it may be-
DivX is a compressed digital video format cre-
come jammed under the brake or gas pedal.
ated by the DivX® video codec from DivX, Inc.
This unit can play DivX video files recorded on For details, refer to the iPod’s manuals.
En 177
Appendix
Appendix
Using the LCD screen correctly ! When using a cellular phone, keep the an-
tenna of the cellular phone away from the
Handling the LCD screen LCD screen to prevent disruption of the
! When the LCD screen is subjected to direct video in the form of disturbances such as
sunlight for a long period of time, it will be- spots or colored stripes.
come very hot, resulting in possible da-
mage to the LCD screen. When not using
this navigation system, avoid exposing it to
Maintaining the LCD screen
direct sunlight as much as possible. ! When removing dust from the LCD screen
! The LCD screen should be used within the or cleaning it, first turn the system power
temperature ranges shown in “Specifica- off, then wipe with a soft dry cloth.
tions”. ! When wiping the LCD screen, take care not
! Do not use the LCD screen at temperatures to scratch the surface. Do not use harsh or
higher or lower than the operating tem- abrasive chemical cleaners.
perature range because the LCD screen
may not operate normally and the LCD
Small fluorescent tube
screen can be damaged.
! The LCD screen is exposed in order to in- ! A small fluorescent tube is used inside the
crease its visibility within the vehicle. display to illuminate the LCD screen.
Please do not press strongly on it as this — The fluorescent tube should last for ap-
may damage it. proximately 10 000 hours, depending on
! Do not push the LCD screen with excessive operating conditions. (Using the naviga-
force as this may scratch it. tion unit at low temperatures reduces
! Never touch the LCD screen with anything the service life of the fluorescent tube.)
besides your finger when operating the — When the fluorescent tube reaches the
Touch Panel functions. The LCD screen can end of its useful life, the LCD screen will
scratch easily. (The stylus is supplied for become dark and images will no longer
special calibrations. Do not use the stylus be projected. If this happens, consult
for normal operation.) your dealer or the nearest authorized
Pioneer service station.
178 En
Appendix
Appendix
Display information
Destination Menu Phone Menu
Appendix
Page Page
[Address] 25 [Dial Pad] 57
[POI] [Call Home] 58
[Around Current GPS Location] 28 [GOOG-411] 59
[Around Destination] 28 [Phone Volume] 60
[Around Cursor] 27 [Received Calls] 57
[Along Route] 28 [Dialed Numbers] 57
[Saved Criteria] 30 [Missed Calls] 57
[Register Search Criteria] 29 [Phone Book Transfer] 59
[Favorites] 33 [Phone Settings]
[History] 33 [Connection] 55
[USB/SD] 31 [Bluetooth On/Off] 61
[Return Home] 34 [Auto Answer Preference] 61
[Delete Route] 45 [Refuse All Calls] 61
[Save Route] 34 [Echo Cancel] 62
[Route Function] [Auto Connect] 62
[Route info] 41 [Edit Name] 62
[Itinerary] 42 [Clear Memory] 60
[Edit Route] 44 [Bluetooth Software Update] 64
[Saved Routes] 44
[Coordinate] 32
[MSN Direct] 46
En 179
Appendix
Appendix
Settings Menu
Navi Settings
180 En
Appendix
Appendix
Appendix
Page Page
[Language] 135 [AV1 Input] 143
[Splash Screen] 135 [AV2 Input] 143
[Back Camera] 136 [Ant CTRL] 143
[Screen Calibration] 137 [Wide Mode] 143
[Picture Adjustment] 137 [MUTE Input/GUIDE] 144
[Illumi Color] 137 [Rear SP] 144
[Service Information] 138 [VR Catalog Mode] 144
[Screen Off] 138
En 181
Appendix
Appendix
Page
[FAD/BAL] ([Balance]) 139
Page
[EQ] 139 [Map] 35
[Loudness] 141 [Save as...] 37
[Sub Woofer] 141 [Add Pin] 38
[HPF] 142 [Add POI] 39
[SLA] 142 [Add Favorite] 40
[Bass Booster] 142 [Route...] 36
[Go Here Now] 37
[Add Via] 37
[Continue] 37
[Starting Point] 37
[Info] 38
182 En
Appendix
Appendix
DVD Setup
Appendix
Page
[Language] 82
[Assist Subtitle] 82
[Multi Angle] 83
[TV Aspect] 83
[Parental] 83
[DivX VOD] 84
[Auto Play] 84
[Subtitle File] 85
En 183
Appendix
Appendix
Glossary DivX
DivX is a popular media technology created by
AAC DivX, Inc. DivX media files contain highly com-
AAC is short for Advanced Audio Coding and pressed video with high visual quality that
refers to an audio compression technology maintains a relatively small file size. DivX files
standard used with MPEG-2 and MPEG-4. can also include advanced media features like
menus, subtitles, and alternate audio tracks.
Aspect ratio
Many DivX media files are available for down-
This is the width-to-height ratio of a TV screen.
load online, and you can create your own
A regular display has an aspect ratio of 4:3.
using your personal content and easy-to-use
Wide screen displays have an aspect ratio of
tools from DivX.com.
16:9, providing a bigger picture for exceptional
presence and atmosphere. DivX Certified
DivX Certified products are officially tested by
Bit rate
the creators of DivX and guaranteed to play all
This expresses data volume per second, or bps
versions of DivX video, including DivX 6.
units (bits per second). The higher the rate,
the more information is available to reproduce Favorites
the sound. Using the same encoding method A frequently visited location (such as your
(such as MP3), the higher the rate, the better workplace or a relative’s home) that you can
the sound. register to allow easy routing.
Built-in sensor GPS
The built-in sensor that enables the system to Global Positioning System. A network of satel-
estimate your vehicle’s position. lites that provides navigation signals for a vari-
ety of purposes.
CD-DA
This stands for a general music CD (commer- Guidance mode
cial-release audio CD). In this manual, this The mode in which guidance is given as you
word is sometime used for a distinction be- drive to your destination; the system automati-
tween data CD (includes the compressed cally switches to this mode as soon as a route
audio file) and the general music CD. has been set.
Chapter Guidance point
Titles of DVD-Video or DVD-VR are in turn di- These are important landmarks along your
vided into chapters which are numbered in route, generally intersections. The next gui-
the same way as the chapters of a book. With dance point along your route is indicated on
discs featuring chapters, you can quickly find the map by the yellow flag icon.
a desired scene with chapter search.
Home location
Current location Your registered home location.
The present location of your vehicle; your cur-
rent location is shown on the map by a red tri-
angle mark.
Destination
A location you choose as the end point of your
journey.
184 En
Appendix
Appendix
Appendix
software with ID3 Tag editing functions.
MP3 is short for MPEG Audio Layer 3. It is an
Although the tags are restricted by the num-
audio compression standard established by a
ber of characters, the information can be
working group (MPEG) of the ISO (Interna-
viewed when the track is played back.
tional Standards Organization). MP3 is able to
ISO9660 format compress audio data to about 1/10th the size
This is the international standard for the for- of a conventional disc.
mat logic of DVD/CD-ROM folders and files.
MPEG
For the ISO9660 format, there are regulations
This stands for Moving Pictures Experts
for the following two levels:
Group, and is an international video image
Level 1:
compression standard.
The file name is in 8.3 format (the name con-
sists of up to 8 characters, half-byte English Multi-angle
capital letters, half-byte numerals and the “_” With regular TV programs, although multiple
sign, with a file-extension of three characters). cameras are used to simultaneously shoot
Level 2: scenes, only images from one camera at a
The file name can have up to 31 characters (in- time are transmitted to your TV. Some DVDs
cluding the separation mark “.” and a file ex- feature scenes shot from multiple angles, let-
tension). Each folder contains less than 8 ting you choose your viewing angle as desired.
hierarchies.
Extended formats Multi-audio (Multilingual dialog)
Joliet: Some videos feature dialog recorded in multi-
File names can have up to 64 characters. ple languages or audio recorded in multiple
Romeo: tracks. For example, dialog in up to 8 lan-
File names can have up to 128 characters. guages can be recorded on a single DVD-Vi-
! Level 1: deo, letting you choose the language as
The file name is in 8.3 format (the name desired.
consists of up to 8 characters, half-byte
Multi-session
English capital letters, half-byte numerals
Multi-session is a recording method that al-
and the “_” sign, with a file-extension of
lows additional data to be recorded later.
three characters).
When recording data on a CD-ROM, CD-R or
! Level 2:
CD-RW, etc., all data from beginning to end is
The file name can have up to 31 characters
treated as a single unit or session. Multi-ses-
(including the separation mark “.” and a file
sion is a method of recording more than 2 ses-
extension). Each folder contains less than 8
sions in one disc.
hierarchies.
! Extended formats Multi-subtitle
Joliet: For example, subtitles in up to 32 languages
File names can have up to 64 characters. can be recorded on a single DVD-Video, letting
Romeo: you choose as desired.
En 185
Appendix
Appendix
Set route
The route marked out by the system to your
destination. It is highlighted in bright color on
the map.
Title
DVD-Video or DVD-VR discs have a high data
capacity, enabling recording of multiple mo-
vies on a single disc. If, for example, one disc
186 En
Appendix
Appendix
Appendix
........................................... 10.0 A Channels Driven)
Dimensions (W × H × D): Load impedance ...................... 4 W (4 W to 8 W [2 W for 1 ch]
Chassis ............................... 178 mm × 100 mm × allowable)
157 mm Preout output level (max):
(7 in. × 3-7/8 in. × 6-1/8 in.) AVIC-F90BT ....................... 4.0 V
Nose ..................................... 170 mm × 96 mm × 8 mm AVIC-F900BT, AVIC-F700BT, AVIC-F7010BT
(6-3/4 in. × 3-3/4 in. × ........................................... 2.2 V
3/8 in.) Preout impedance:
Weight: AVIC-F90BT ....................... 100 ohm
AVIC-F900BT, AVIC-F90BT AVIC-F900BT, AVIC-F700BT, AVIC-F7010BT
........................................... 2.2 kg (4.9 lbs) ........................................... 1 kohm
AVIC-F700BT, AVIC-F7010BT Equalizer (3-Band Parametric Equalizer):
........................................... 2.1 kg (4.6 lbs) Low
NAND flash memory ............. 2 GB Frequency ................ 40 Hz/80 Hz/100 Hz/160 Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
Navigation when boosted)
GPS Receiver: Gain ............................ ±12 dB
System ................................ L1, C/Acode GPS Mid
SPS (Standard Positioning Frequency ................ 200 Hz/500 Hz/1 kHz/2 kHz
Service) Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
Reception system .......... 30-channel multi-channel when boosted)
reception system Gain ............................ ±12 dB
Reception frequency .... 1 575.42 MHz High
Sensitivity .......................... –140 dBm (typ) Frequency ................ 3.15 kHz/8 kHz/10 kHz/
Position update frequency 12.5 kHz
........................................... Approx. once per second Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
GPS antenna: when boosted)
Antenna ............................. Micro strip flat antenna/ Gain ............................ ±12 dB
right-handed helical polari- Loudness contour:
sation Low ....................................... +3.5 dB (100 Hz), +3 dB
Antenna cable ................. 5.0 m (16 ft. 5 in.) (10 kHz)
Dimensions (W × H × D) Mid ....................................... +10 dB (100 Hz), +6.5 dB
........................................... 33 mm × 15 mm × 36 mm (10 kHz)
(1-1/4 in. × 5/8 in. × High ..................................... +11 dB (100 Hz), +11 dB
1-3/8 in.) (10 kHz)
Weight ................................ 96 g (0.2 lbs) (volume: –30 dB)
HPF:
Display Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
Screen size/aspect ratio ....... 5.8 inch wide/16:9 125 Hz
(effective display area: Slope .................................... –12 dB/oct
128 mm × 72 mm) Subwoofer:
Pixels ............................................. 384 000 (800 × 480) Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
Display method ........................ TFT Active matrix driving 125 Hz
Color system .............................. NTSC/PAL compatible Slope .................................... –18 dB/oct
Durable temperature range: Gain ...................................... –24/+6 dB
Power on ............................ +14 °F to +140 °F Phase .................................. Normal/Reverse
En 187
Appendix
Appendix
188 En
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU
TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL:55-9178-4270
先鋒股份有限公司
總公司 : 台北市中山北路二段44號13樓
電話 : (02) 2521-3588
先鋒電子(香港)有限公司 Published by Pioneer Corporation.
香港九龍尖沙咀海港城世界商業中心9樓901-6室 Copyright © 2008 by Pioneer Corporation.
電話 : (0852) 2848-6488 All rights reserved.