1. Amr A. Abdel Fatah, Mohammed A. Hassan, Mohamed Lotfy and Antoine S.
Dimitri “Using Digital Models for Condition Based Maintenance of High
Pressure Pumps in SWRO Desalination Plants”, Asian Turbomachinery and Pump Symposium, Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, Singapore (2018). 2. Cornelius Scheffer, “Session Five: Pump Condition Monitoring Through Vibration Analysis”, PUMPS: Maintenance, Design, and Reliability Conference – IDC Technologies, (2008). 3. WANG Weimin, GAO Jinji, HUANG Liquan, and XIN Zhengqiu, “Experimental Investigation on Vibration Control of Rotorbearing System with Active Magnetic Exciter”, Diagnosis and Selfrecovery Engineering Research Center, Beijing University of Chemical Technology, Beijing 100029, China, ( July, 2011). 4. S.Y. Yoon et al., “Control of Surge in Centrifugal Compressors by Active Magnetic Bearings”, Advances in Industrial Control, DOI 10.1007/978-1-4471- 4240-9_2, Springer-Verlag (London, 2013). 5. Kenneth E. Atkins, James D. Tison and J. C. (Buddy) Wachel, “Critical Speed Analysis of an Eight-Stage Centrifugal Pump”, In Proceedings of the 2nd International Pump Symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University (1985). 6. B.Kiran Kumar, G.Diwakar and Dr.M.R.S. Satynarayana, “Determination of unbalance in rotating machine using vibration signature analysis”, International Journal of Modern Engineering Research, Vol.2, Issue.5, pp-3415-3421, (2012). 7. Taylor & Francis Group, “Vibrational Diagnostics of Rotating Machinery”, (2005). 8. Shiyu Zhou and Jianjun Shi, “Active Balancing and Vibration Control of Rotating Machinery”, The Shock and Vibration Digest, Vol. 33, No. 4,(July 2001) 9. C.W. Yap, “Condition Monitoring of Turbomachinery with Internet-Of-Things (IOT)”, Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, (2018). 10. W. E. (Ed) Nelson and J. W. Dufour, “Pump vibrations”, In Proceedings of the Ninth International Pump Users Symposium, Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University, (1992). 11. Power plant and instrumentation control, Vibration Monitoring System of Steam Turbine, 2016. www.powerplantinstrumentationcontrol.yolasite.com 12. TE Connectivity, Accelerometer from measurement specialist Mfr. No: 4030-006- 120, MODEL4030 ACCELEROMETER, (2017). https://eu.mouser.com/ProductDetail/MeasurementSpecialties/4030006120?qs= %2fha2pyFaduh12EzcakDb4iYaXPx1j2LJenqGHloDczGttDh8yi5KGA%3d%3d 13. National instrument, Data acquisition ion box brand: NI, model USD – 6001, Part Number: 782604-01 (2014). http://www.ni.com/en-lb/shop/select/multifunction- io-device?skuId=35709 14. Jian-Cheng Cai and Da-Tong Qi, “A Numerical Study of the Blade Passing Frequency Noise of a Centrifugal Fan”, JOURNAL OF VIBROENGINEERING, VOLUME 14, ISSUE 3. ISSN 1392-8716, SEPTEMBER 2012. 15. Birajdar, R., Patil, R., & Khanzode, K. (2009, July). Vibration and noise in centrifugal pumps-Sources and diagnosis methods. In 3rd International conference on Integrity, Reliability and Failure (pp. 20-24). 16. Bowman, D. G., Marscher, W. D., & Reid, S. R. (1990). Pump Rotor Critical Speeds Diagnosis and Solutions. In Proceedings of the 7th International Pump Users Symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University. 17. Cerwinske, T. J., Nelson, W., & Salamone, D. J. (1986). Effects Of High Pressure Oil Seals On The Rotordynamics Response Of Centrifugal Compressores. In Proceedings of the 15th Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 18. Lienau, W., & Lagas, N. (2008). Evaluation of Rotordynamic Criteria for Multistage Pump Shafts. In Proceedings of the 24th International Pump Users Symposium. Texas A&M University. Turbomachinery Laboratories. 19. Marscher, W. D. (2013). An End-User's Guide To Centrifugal Pump Rotordynamics (Presented Twice). In Proceedings of the 29th International Pump Users Symposium. Turbomachinery Laboratories, Texas A&M Engineering Experiment Station. 20. W. E. (Ed) Nelson and J. W. Dufour. (1992). Pump vibrations. In Proceedings of the ninth international pump users symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University. 21. Nikolajsen, J. L., & Gajan, R. J. (1988). A New Computer Program for Pump Rotordynamic Analysis. In Proceedings of the 5th International Pump Users Symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University. 22. Pardivala, D., Dyer, S. W., & Bailey, C. D. (1998). Design Modifications And Active Balancing On An Integrally Forged Steam Turbine Rotor To Solve Serious Reliability Problems. In Proceedings of the 27th Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 23. Bethel, L. L., Gans, B. E., Brown, R. N., & Lewis, R. A. (1993). Critical Speeds And The Importance Of Stiffness-A Case Study In The Design And Testing Of A Large Mechanical Drive Steam Turbine To API Standard 612. In Proceedings of the 22nd Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 24. Atkins, K. E., Tison, J. D., & Wachel, J. C. (1985). Critical Speed Analysis of an Eight-Stage Centrifugal Pump. In Proceedings of the 2nd International Pump Symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University. 25. Kocur, J. A., Nicholas, J. C., & Lee, C. C. (2007). Surveying Tilting Pad Journal Bearing And Gas-Labyrinth Seal Coefficients And Their Effect On Rotor Stability. In Proceedings of the 36th turbomachinery symposium. Texas A&M University. Turbomachinery Laboratories. 26. Edney, S. L., Waite, J. K., & Decamillo, S. M. (1996). Profiled Leading Edge Groove Tilting Pad Journal Bearing For Light Load Operation. In Proceedings of the 25th Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 27. Verhoeven, J. J. (1988). Rotordynamic Considerations In The Design Of High Speed Centrifugal Pumps. In Proceedings of the 5th International Pump Users Symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University. 28. Whalen, J. K., & Leader, M. E. (2003). Solving Stability Problems While Commissioning A 100 MW Turbine Generator Set. In Proceedings of the 32nd Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 29. Majovsky, B., & Salamone, D. J. (1986). Dynamic Analysis Of An 8000 HP Steam Turbine Operating Near Its Second Critical Speed. In Proceedings of the 15th Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 30. Smith, D. R., Price, S. M., & Kunz, F. K. (1996). Centrifugal Pump Vibration Caused by Supersynchronous Shaft Instability Use of Pumpout Vanes to Increase Pump Shaft Stability. In Proceedings of the 13th International Pump Users Symposium (pp. 47-60). 31. Frei, A., Gulich, J., Eichhorn, G., Eberl, J., & McCloskey, T. H. (1990). Rotordynamic and Dry Running Behavior of a Full Scale Test Boiler Feed Pump. In Proceedings of the 7th International Pump Users Symposium. Turbomachinery Laboratories, Department of Mechanical Engineering, Texas A&M University. 32. Massey, I. C. (1985). Subsynchronous Vibration Problems In High-Speed, Multistage Centrifugal Pumps. In Proceedings of the 14th Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 33. Kocur, J. A., & Cloud, C. H. (2013). Shop Rotordynamic Testing-Options, Objectives, Benefits and Practices. In Proceedings of the 42nd Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories. 34. Gómez, M. J., Castejón, C., García-Prada, J. C., & López, J. (2015). Experimental Analysis and Validation of a Vibration-Based Technique for Crack Detection in a Shaft. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 373-383). Springer, Cham. 35. Gałka, T. (2012). Vibration-Based Diagnostics of Steam Turbines. In Mechanical Engineering. InTech. 36. Batra, U. (2010). Failure analysis of steam turbine rotor disk. Journal of failure analysis and prevention, 10(3), 178-182. 37. Barella, S., Bellogini, M., Boniardi, M., & Cincera, S. (2011). Failure analysis of a steam turbine rotor. Engineering Failure Analysis, 18(6), 1511-1519. 38. Peter Popaleny and Nicolas Péton. (2012). Steam turbine rotor crack. Bently D.E, Hatch C.H, Fundamental of Rotating Machinery Diagnostics. 39. Chan, R. K. C., & Lai, T. C. (1995). Digital simulation of a rotating shaft with a transverse crack. Applied Mathematical Modelling, 19(7), 411-420. 40. Shankar, M., Kumar, K., & Prasad, S. A. (2010). T-root blades in a steam turbine rotor: A case study. Engineering Failure Analysis, 17(5), 1205-1212. 41. Turhan, Ö., & Bulut, G. (2006). Coupling effects between shaft-torsion and blade- bending vibrations in rotor-blade systems. In Vibration Problems ICOVP 2005 (pp. 505-510). Springer, Dordrecht. 42. Míšek, T., & Kubín, Z. (2008). Static and dynamic analysis of 1 220 mm steel last stage blade for steam turbine. In Applied and Computational Mechanics 3. 2009 (pp.133–140). 43. Christensen, R. H., & Santos, I. F. (2006). Active rotor-blade vibration control using shaft-based electromagnetic actuation. Journal of Engineering for Gas Turbines and Power, 128(3), 644-652. 44. Anegawa, N., Fujiwara, H., & Matsushita, O. (2011). Vibration diagnosis featuring blade-shaft coupling effect of turbine rotor models. Journal of Engineering for Gas Turbines and Power, 133(2), 022501. 45. Karlberg, M., Karlsson, M., Karlsson, L., & Näsström, M. (2010). Dynamics of rotor systems with clearance and weak pedestals in full contact. In International Symposium on Transport Phenomena and Dynamics of Rotating Machinery: 03/04/2010-07/04/2010 (pp. 531-536). Curran Associates, Inc.. 46. Sinou, J. J., & Thouverez, F. (2004). Non-linear dynamic of rotor–stator system with non-linear bearing clearance. Comptes Rendus Mecanique, 332(9), 743-750. 47. Shabaneh, N. (2003, January). On the Vibration of a Rotor-Shaft System With Viscoelastically Supported Bearings. In ASME 2003 International Mechanical Engineering Congress and Exposition (pp. 667-673). American Society of Mechanical Engineers. 48. Tůma, J., & Biloš, J. (2007). Fluid induced instability of rotor systems with journal bearings. Engineering Mechanics, 14(1-2), 69-80. 49. Yang, B. S., Choi, S. P., & Kim, Y. C. (2005). Vibration reduction optimum design of a steam-turbine rotor-bearing system using a hybrid genetic algorithm. Structural and Multidisciplinary Optimization, 30(1), 43-53. 50. Wensheng, M., Hai, H., Guoquan, F., Zhaobo, C., & Kirk, R. G. (2015). Labyrinth Seals Diameter and Length Effect Study on Nonlinear Dynamics. Procedia Engineering, 99, 1358-1364. 51. Lusty, C., Sahinkaya, N., & Keogh, P. (2015). Rotor active vibration control via internal magnetic bearings and a concentric inner shaft coupling. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 1407- 1414). Springer, Cham. 52. Jing, J., Meng, G., Sun, Y., & Xia, S. (2005). On the oil-whipping of a rotor- bearing system by a continuum model. Applied mathematical modelling, 29(5), 461-475. 53. Redmond, I., & Al-Hussain, K. (2001). Misalignment as a source of vibration in rotating shaft systems. System, 1, 47. 54. Verma, Alok & Sarangi, Somnath & Kolekar, Maheshkumar. (2014). Experimental Investigation of Misalignment Effects on Rotor Shaft Vibration and on Stator Current Signature. Journal of Failure Analysis & Prevention, 14(2), 125–138. 55. Feng, S., Geng, H. P., Qi, S. M., & Yu, L. (2012). Vibration of a misaligned rotor system with asymmetric shaft stiffness. In Advanced Materials Research (Vol. 503, pp. 813-818). Trans Tech Publications. 56. Beebe, R. (2002). Investigation of High Vibration on Low Pressure Steam Turbines. In R. Blayden, & J. Kennedy (Eds.), ICOMS 2002 Int. Conference of Maintenance Societies Proceedings (pp. 1 - 7). Melbourne Vic Australia: Australasian Corrosion Association. 57. Horst, H. G., & Wölfel, H. P. (2004). Active vibration control of a high speed rotor using PZT patches on the shaft surface. Journal of Intelligent Material Systems and Structures, 15(9-10), 721-728. 58. Cveticanin, L. (2005). Free vibration of a Jeffcott rotor with pure cubic non-linear elastic property of the shaft. Mechanism and Machine Theory, 40(12), 1330-1344. 59. Ehrich, R. (1980). High Speed Balancing Procedures. In Proceedings of the 9th Turbomachinery Symposium. Texas A&M University. Gas Turbine Laboratories. 60. Abuzaid, M. A., Eleshaky, M. E., & Zedan, M. G. (2009). Effect of partial rotor- to-stator rub on shaft vibration. Journal of Mechanical Science and Technology, 23(1), 170-182. 61. Pennacchi, P., & Vania, A. (2007). Analysis of rotor-to-stator rub in a large steam turbogenerator. International Journal of Rotating Machinery, 2007. 62. Jiang, J., & Ulbrich, H. (2003). Stability Analysis of Full Annular Rub in Rotor‐ to‐Stator Systems. PAMM, 2(1), 88-89. 63. Goldman, P., Muszynska, A., & Bently, D. E. (2000). Thermal bending of the rotor due to rotor-to-stator rub. International Journal of Rotating Machinery, 6(2), 91-100. 64. Dimarogonas, A. D., & Gomez-Mancilla, J. C. (1994). Flow-excited turbine rotor instability. International Journal of Rotating Machinery, 1(1), 37-51. 65. Li-juan, G., Chun-hui, Z., Min, H., & Yong, Z. (2013). Vibration Analysis of the Steam Turbine Shafting Caused by Steam Flow. Indonesian Journal of Electrical Engineering and Computer Science, 11(8), 4422-4432. 66. Pennacchi, P., & Vania, A. (2011). Analysis of the instability phenomena caused by steam in high-pressure turbines. Shock and Vibration, 18(4), 593-612. 67. Gosiewski, Z. (2008). Analysis of coupling mechanism in lateral/torsional rotor vibrations. Journal of theoretical and applied mechanics, 46(4), 829-844. 68. Wenzhi, G., & Zhiyong, H. (2010). Active control and simulation test study on torsional vibration of large turbo-generator rotor shaft. Mechanism and Machine Theory, 45(9), 1326-1336. 69. Bovsunovskii, A. P., Chernousenko, O. Y., Shtefan, E. V., & Bashta, D. A. (2010). Fatigue damage and failure of steam turbine rotors by torsional vibrations. Strength of Materials, 42(1), 108-113. 70. Ogbonnaya, E. A., Poku, R., Ugwu, H. U., Johnson, K. T., Orji, J. C., & Samson, N. (2015). Analysis of Gas Turbine Blade Vibration Due to Random Excitation. In Gas Turbines-Materials, Modeling and Performance. InTech. 71. Keivan Anbarani, Fall 08. Vibration due to rotation unbalance. 72. Dutt, J. K., & Nakra, B. C. (1993). Vibration response reduction of a rotor shaft system using viscoelastic polymeric supports. Journal of Vibration and Acoustics, 115(2), 221-223. 73. Fedák, V., Záskalický, P., & Gelvanič, Z. (2014). Analysis of Balancing of Unbalanced Rotors and Long Shafts using GUI MATLAB. In MATLAB Applications for the Practical Engineer. InTech. 74. Kumar, B. K., Diwakar, G., & Satynarayana, M. R. S. (2012). Determination of unbalance in rotating machine using vibration signature analysis. International Journal of Modern Engineering Research (IJMER), 2(5), 3415-3421. 75. Das, A. S., Dutt, J. K., & Ray, K. (2010). Active vibration control of unbalanced flexible rotor–shaft systems parametrically excited due to base motion. Applied Mathematical Modelling, 34(9), 2353-2369. 76. Sinha, J. K., Lees, A. W., & Friswell, M. I. (2004). Estimating unbalance and misalignment of a flexible rotating machine from a single run-down. Journal of Sound and Vibration, 272(3-5), 967-989. 77. Jung, D., & DeSmidt, H. (2012, August). Limit-Cycle Analysis of Three Dimensional Rigid Rotor/Shaft/Autobalancer System With Symmetric Bearing Support. In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. 687-700). American Society of Mechanical Engineers. 78. Zhou, S., & Shi, J. (2001). Active balancing and vibration control of rotating machinery: a survey. Shock and Vibration Digest, 33(5), 361-371. 79. Das, A. S., Nighil, M. C., Dutt, J. K., & Irretier, H. (2008). Vibration control and stability analysis of rotor-shaft system with electromagnetic exciters. Mechanism and Machine Theory, 43(10), 1295-1316. 80. Asdaque, P. M. G., Behera, R. K., & Shaik, J. H. (2014). Vibration Analysis of Multi-Disk Multi-Profiled Shaft-Rotor Systems. In Applied Mechanics and Materials (Vol. 612, pp. 17-22). Trans Tech Publications. 81. Shekhar, S., Sharma, N., Roy, H. K., Das, A. S., & Dutt, J. K. (2015). Vibration Control of Rotor Shaft Systems Using Electromagnetic Actuator. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 1415- 1429). Springer, Cham. 82. Yan, S., & Sievert, R. (2015). Vibration sensitivity of large turbine generator shaft trains to unbalance. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 3-14). Springer, Cham. 83. Vania, A., Pennacchi, P., & Chatterton, S. (2015). Influence of the Supporting Structure Dynamic Behaviour on the Shaft Vibration of a Real Rotating Machine. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics (pp. 2123-2136). Springer, Cham.
Process Optimisation: A Three-Day Symposium Organised by the Midlands Branch of the Institution of Chemical Engineers and Held at the University of Nottingham, 7–9 April 1987
Fluid Mixing II: A Symposium Organised by the Yorkshire Branch and the Fluid Mixing Processes Subject Group of the Institution of Chemical Engineers and Held at Bradford University, 3-5 April 1984