Professional Documents
Culture Documents
10
IGNITION SYSTEM MAINTENANCE
Before performing any service, maintenance or repair IGNITION SYSTEM GENERAL MAINTENANCE AND
procedures, review SAFETY on page 1.05-1, RIGGING INSPECTION
AND LIFTING ENGINES on page 1.10-1 and the
The ignition harness is a combination of conduit boxes
following safety message.
with a heavy-duty, plastic-jacketed conduit (see Figure
4.10-2).
IGNITION SYSTEM
NOTICE
Do not pressure-wash or steam-clean any electronic
devices including the Engine Control Unit (see Figure
4.10-1). Pressure-washing or steam-cleaning can
damage the electronics.
Figure 4.10-2
! WARNING
FORM 6319-2
4.10-1 © 8/2012