Professional Documents
Culture Documents
Page 1 of 3
Illustration 2
Illustration 3
The VIMS refers to the power train oil filters as "PT OIL FILTER".
The power train oil filters are located on the left side of the engine
compartment.
file://C:\SIS\TMP\sisB2A1prt.html 11-04-2003
Copyright 1991, 2003 Caterpillar Inc. All Rights Reserved. Page 2 of 3
Illustration 4
The oil cooler for the power train is located on the left side of the machine
under the power train oil filters.
Illustration 5
The magnetic screens are located in the oil reservoir that is in the case for
the output transfer gears.
Illustration 6
(5) Impeller Clutch Solenoid. (6) Lockup Clutch Solenoid. (7) Input Drive
Shaft. (13) Torque Converter Output Speed Sensor. (15) Torque Converter
Outlet Relief Valve. (16) Transmission and Torque Converter Pump.
The VIMS refers to the impeller clutch solenoid as "TC IMPLR SOL".
file://C:\SIS\TMP\sisB2A1prt.html 11-04-2003
Copyright 1991, 2003 Caterpillar Inc. All Rights Reserved. Page 3 of 3
The VIMS refers to the lockup clutch solenoid as "TC LCKUP SOL".
The VIMS refers to torque converter output speed as "TC OUT SPD".
Illustration 7
The torque converter oil temperature sender is located above the torque
converter outlet relief valve on the torque converter.
Illustration 8
The pressure sensor for the impeller clutch is located on the torque
converter.
Copyright 1991, 2003 Caterpillar Inc.
All Rights Reserved.
file://C:\SIS\TMP\sisB2A1prt.html 11-04-2003