Professional Documents
Culture Documents
than
More s of
ar
25 ye nce
rie
expe
Cased Hole
Logging Instruments
www.antares-geo.de
ANTARES Datensysteme GmbH
Rudolf-Diesel-Str. 6
28816 Stuhr
Germany
Phone: +49 (0) 421 87194-0
Fax: +49 (0) 421 87194-25
Email: info@antares-geo.de
Web: www.antares-geo.de
The specifications contained in this document can be modified without previous announce-
ment. No part of this document may be duplicated or transmitted without explicit written
permission of ANTARES Datensysteme GmbH.
Dear Prospective Client
Over the last 25 years ANTARES has grown from a single small office
in Germany to an international company with offices in Houston and
Cairo serving customers in over 30 countries. Close collaboration
with our customers has been key to expanding our business. Our
customers see ANTARES as a partner not only for leading edge
technology but also for training, maintenance and Research &
Development.
Conrad Blumhagen
© ANTARES 2019 1
Cased Hole Product Line
Combinability
Radial
Double
Free Pipe
Segmented
Compensated
Bond Tool
Neutron
Knuckle
Joint
Instrument
(2 3/4")
(2 1/2 ") (2 1/2 ") (1 11/16 ")
Quartz
Pressure Inline
Conductivity Roller Stand Alone
Centralizer
Temperature
(2 1/2 ")
Portable System
(1 11/16 ")
Inline Double
Roller Knuckle
Multifinger Centralizer Joint
Caliper (1 11/16 ") (2 1/2 ")
24 fingers
(1 11/16 ")
ANTARES Interface Panel
Radial
Multifinger Segmented
Caliper Bond Tool
40 fingers CBL (2 3/4")
(2 7/8 ") (2 1/2 ")
2 © ANTARES 2019
Cased Hole Product Line
TABLE OF CONTENTS
Preface 1
Combinability 2
Acoustic Instruments
Cement Bond Log (2 1/2") 0929 12
Compensated Acoustic /CBL (2 1/2") 0929 13
Compensated Acoustic /CBL (2 1/2") 0928 or 0930 14
Compensated Acoustic /CBL (3 3/8") 0928 or 0930 15
Radial Segmented Bond Tool (2 3/4") 0928 or 0929 16
Radiactive Instruments
Pulsed Decay Neutron Instrument (1 11/16") 0929 17
Spectrum Gamma Ray (2 1/2") 0928 or 0930 18
Spectrum Gamma Ray (3 3/8") 0928 or 0930 19
Compensated Neutron (2 1/2") 0928 or 0930 20
Compensated Neutron (3 3/8") 0928 or 0930 21
Contacts 25
© ANTARES 2019 3
Cased Hole Product Line
Specifications
Diameter: 43 mm (1.69") Sensors: GR (NaI scintillation
Length: 1,470 mm (58") crystal)
CCL
Weight: 8 kg (18 lbs) Cable Head Voltage
Electronics Temp
Max. Temp: 175°C (350°F)
Max. Pressure: 100 MPa (15,000 psi) Measure Points (from bottom):
GR: 226 mm (9“)
Top Connector: GO1 CL: 1210 mm (47.6")
Bottom Connector: ANTARES Toolbus CH
Measuring Parameters
Measuring Range: Accuracy:
GR: 0 to 3000 gAPI GR: + 5 % of measured values*
CCL: can be adjusted
* Gamma Ray measurements are radioactive measurements and hence subject to statistical variations.
These variations depend inter alia on logging speed and filter strength.
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 70 mm (2.75“) Logging Speed
Max Hole Diameter: depending on tool GR: 9 m/min
string configuration- (1800 ft/hour)
decentralized for large Sample Rate: selectable
diameters
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
4 © ANTARES 2019
2 1/2 " Product Line
Telemetry / GR / CCL
The ANTARES 0928 Digital Telemetry instrument handles the communication between the ALADIN
surface system and ANTARES digital downhole instruments in both directions. It also monitors the
temperature of the telemetry electronics and the cable head voltage.
The tool includes a Gamma Ray scintillation detector, measuring the total gamma rays emitted by the
surrounding formation and a Casing Collar Locator. The Gamma Ray Log (GR) can be ran in open and
cased holes, in all mud systems and in dry holes. For cased hole operations, a CCL is also part of the
tool.
Specifications
Measuring Parameters
Measuring Range: Accuracy*:
GR: 0 to 3000 gAPI GR: + 5 % of measured values*
CCL: single casing string
* Gamma Ray measurements are radioactive measurements and hence subject to statistical variations.
On a log, these variations between other factors depend on logging speed and filter strength.
Logging parameters
Recommended: Recommended:
Min. Hole Diameter: 100 mm (4") Logging Speed GR: 9 m/min
Max Hole Diameter: NA (1800 ft/hour)
Sample Rate: selectable
Combinability
With ANTARES SHARP family of 2 ½" open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
© ANTARES 2019 5
3 3/8 " Product Line
Telemetry / GR
The ANTARES 0930 Digital Telemetry instrument handles the communication between the ALADIN
surface system and ANTARES digital downhole instruments in both directions. It also monitors the
temperature of the telemetry electronics and the cable head voltage.
The tool includes a Gamma Ray scintillation detector, measuring the total gamma rays emitted by the
surrounding formation. The Gamma Ray Log can be run in open and cased holes, in all mud systems
and in dry holes.
Specifications
Diameter: 86 mm (3.39") Sensors: GR (NaI Scintillation
Length: 1,310 mm (52") Crystal
Cable Head Voltage
Weight: 34 kg (75 lbs) Electronics Temp
Measuring Parameters
Measuring Range: Accuracy:
GR: 0 to 3000 gAPI GR: + 5 % of measured values*
* Gamma Ray measurements are radioactive measurements and hence subject to statistical variations.
On a log, these variations between other factors depend on logging speed and filter strength.
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 125 mm (4.92“) Logging Speed
Max. Hole Diameter: 550 mm (21.7") GR: 9 m/min
to be decentralized in (1800 ft/hour)
hole sizes above Sample Rate: selectable
550 mm
Combinability
With all 3 3/8 " ANTARES O/H Instruments
Separate 3 3/8 " CCL available
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
6 © ANTARES 2019
Cased Hole Product Line
Specifications
Diameter: 45 mm (1.77") Sensors: 24-Finger (LVDT)
Length: 1,285 mm (ca.) (2.6") Sensor Temperature
Weight: 15 kg (ca.)(33 lbs) Accelerometer (x, y)
Measuring Parameters
Measuring Range: Accuracy: + 0.89 mm (+/- 0.035")
Diameter w/4.5" fingers:50 mm to 114 mm
(1.97" - 4.5")
Diameter w/ 7" fingers 50 mm to 178 mm Resolution: 0.1 mm (0.0039")
(1.97" to 7.0")
Tool Deviation
Logging Parameters
Recommended Recommended
Min. Inner Pipe Diameter: 70 mm (2.8") Logging Speed:
Max. Inner Pipe Diameter: w/ 929 Telemetry up to 6.5 m/min*
w/ 4.5" fingers 114 mm (4.5") (up to 1280 ft/hour)
w/ 7" fingers 178 mm (7.0") *depending on sample rate and cable type
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
© ANTARES 2019 7
Cased Hole Product Line
Specifications
Diameter: 73 mm (2.9") Sensors: 40-Finger (LVDT)
Length: 2440 mm (96.0") Sensor Temperature
Weight: 34 kg (75 lbs) Accelerometer (x, y)
Measuring Parameters
Measuring Range: Accuracy: + 0.89 mm (+/- 0.035")
Diameter w/ 7" fingers: 80 mm to 178 mm
(3.15" - 7.0")
Diameter w/10" fingers: 80 mm to 254 mm Resolution: 0.1 mm (0.0039")
(3.15" to 10.0")
Tool Deviation
Measuring Range: 0-180°
Logging Parameters
Recommended Recommended
Min. Inner Pipe Diameter: 98 mm (3.9") Logging Speed:
Max. Inner Pipe Diameter: w/ 929 Telemetry up to 4.5 m/min *
w/ 7" fingers 178 mm (7.0") (up to 885 ft/hour)
w/10" fingers 254 mm (10.0") w/ 928 Telemetry up to 15 m/min *
(up to 2950 ft/hour)
*depending on sample rate and cable type
Combinability
With ANTARES C/H Instruments or with ANTARES SHARP family of 2 ½" open hole tools
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
8 © ANTARES 2019
Cased Hole Product Line
Specifications
Diameter: 102 mm (4") Sensors: 60-Finger (LVDT)
Length: 1980 mm (78") Accelerometer (x, y)
Weight: 54 kg (119lbs) Sensor Temperatur
Measuring Parameters
Measuring Range: Accuracy: +/- 0.70 mm (+/- 0.027")
Diameter w/10" fingers:102 mm to 254 mm
(4.0" - 10.0")
Diameter w/14" fingers: 102 mm to 356 mm Resolution: 0.1 mm (0.0039")
(4.0" to 14.0")
Tool Deviation
Logging Parameters
Recommended Recommended
Min. Inner Pipe Diameter: Logging Speed:
127 mm (5.0") w/ 929 Telemetry up to 4.5 m/min *
Max. Inner Pipe Diameter: (up to 885 ft/hour)
w/ 10" fingers 254 mm (10.0")
w/ 14" fingers 356 mm (14.0") *depending on sample rate and cable type
Combinability
With ANTARES C/H Instruments.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
© ANTARES 2019 9
2 1/2 " Product Line
Specifications
Measuring Parameters:
Measuring Range:
CAL: 100 - 330 mm Accuracy:
(4"-13") 1 % of Measured Value + 5 mm (+0.2")
Logging parameters
Recommended: Recommended:
Min. Hole Diameter: 100 mm (3.94") Logging Speed: max. 30 m/min
Max Hole Diameter: 330 mm (13") 5900 ft/hr
Sample Rate: selectable
Combinability
With ANTARES SHARP family of 2 ½" open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
10 © ANTARES 2019
3 3/8 " Product Line
6-Arm Caliper
The ANTARES 1029 6-Arm Caliper tool is a motorized instrument. All six arms provide individual
measurements. The six caliper signals are generated by using high-resolution precision magnetic
sensors and cover a range between 101 and 786 mm (4 and 31 inch). An extension arm kit allows for
measuring borehole diameters up to 1,094 mm (43 inch). From the six independent radii measure-
ments, an average borehole diameter and X - Y - Z average diameters can be calculated.
Specifications
Diameter: 86/92 mm (3.39/3.62") Sensors: Magneto Resistivity
w/extension arms: 127 mm (5") Angle Sensors
Length: 2,478 mm (98”)
Weight: 77 kg (170 lbs) Measure Point (from bottom):
608 mm (23.9")
Max. Temp: 175°C (350°F)
Max. Pressure: 140 MPa (20,000 psi)
Measuring Parameters:
Measuring Range: Accuracy:
Cal: 101-786 mm (4-30.96") 1% of Measured Value + 5 mm (0.2")
w/extension arms: 127-1,094 mm
(5-43.06") * with a data distance of 50 mm (2")
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 150 mm (5.9“) Logging Speed: 30 m/min max.
Max. Hole Diameter: 786 mm (30.96“) 5900 ft/hr max.
w/extension arms: 1,094 mm (43.06") Sample Rate: selectable
Combinability
With all 3 3/8 " ANTARES O/H Instruments
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
© ANTARES 2019 11
Cased Hole Product Line
Specifications
Diameter: 63.5 mm (2.5") Transmitter Type: Ceramic, monopole
Length: 2,760 mm (108”) Sensors: Ceramic Transducer
Weight: 33 kg (73 lbs) Array
Measuring Parameters
Measuring Range: Accuracy
DT: 100-800 µs/m DT*: + 3 µs/m
(35-250 µs/ft) (+1µs/ft)
* centralized tool in a 100 mm diameter
borehole
Logging parameters
Recommended Recommended
Min. Hole Diameter:100 mm (4“) Logging Speed: 6-15 m/min
Max Hole Diameter: 400 mm (16“) 1200- 3000 ft/hr
Combinability
With ANTARES C/H Instruments
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
12 © ANTARES 2019
Cased Hole Product Line
Specifications
Diameter: 63.5 mm (2.5") Transmitter Type: Ceramic, monopole
Length: 3,940 mm (156”) Sensors: Ceramic Transducer
Weight: 56 kg (123 lbs) Array
Measuring Parameters
Measuring Range: Accuracy
DT: 100-800 µs/m DT*: + 3 µs/m
(35-250 µs/ft) (+1µs/ft)
* centralized tool in a 100 mm diameter
borehole
Logging parameters
Recommended Recommended
Min. Hole Diameter:100 mm (4“) Logging Speed: 6-15 m/min
Max Hole Diameter: 400 mm (16“) 1200- 3000 ft/hr
Combinability
With ANTARES C/H Instruments
If the tool is used in CBL Mode, the length can be reduced by the lower transducer section.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
© ANTARES 2019 13
2 1/2 " Product Line
Specifications
Diameter: 63.5 mm (2.5") Transmitter Type: Ceramic, monopole
Length: 3,940 mm (156”) Sensors: Ceramic Transducer
Weight: 56 kg (123 lbs) Array
Measuring Parameters
Measuring Range: Accuracy
DT: 100-800 µs/m DT*: + 3 µs/m (+1µs/ft)
(35-250 µs/ft) * centralized tool in a 100 mm (4") diameter
Traces up to 4000 µs borehole
Logging parameters
Recommended Recommended
Min. Hole Diameter:100 mm (4“) Logging Speed: 6-15 m/min
Max Hole Diameter: 400 mm (16“) 1200- 3000 ft/hr
Combinability
With ANTARES SHARP family of 2 ½" open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
14 © ANTARES 2019
3 3/8 " Product Line
Specifications
Diameter: 86 mm (3.39") Transmitter Type: Ceramic, monopole
Length: 4,416 mm (173.9") Sensors: Ceramic Transducer
Weight: 99 kg (218 lbs) Array
Measuring Parameters
Measuring Range: Accuracy:
DT: 50-800 µs/m DT*: + 3 µs/m (+1µs/ft)
(15-250 µs/ft)
Traces: up to 4000 µs * centralized tool in a 200 mm (8") diameter
borehole
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 125 mm (4.92“) Logging Speed: 6-12 m/min
Max. Hole Diameter: 550 mm (21.65“) 1180- 2360 ft/hr
Sample Rate: selectable
Standard Displayed
Displayed Curves
Standard Curves
Open Hole Cement Bond Log
DT in µs/m (µs/ft) Delta Time for 2' spacing SRTN in µs Single Receiver Travel from
Near Receiver
RuntimeT1R1 in µs Acoustic Travel Times AmpN Amplitude of first arrival from
RuntimeT1R2 in µs Near Receiver, measured at
RuntimeT2R1 in µs casing travel time
RuntimeT2R2 in µs Trace F in mV Trace Information from Far
Receiver
TTI in µs Integrated Travel Time BI Bond Index
Combinability
With all 3 3/8 " ANTARES O/H Instruments
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
© ANTARES 2019 15
Cased Hole Product Line
Specifications
Diameter: 69.9 mm (2.75”) Transmitter-Receiver- Spacing:
Length: 2,980 mm (117.32") Near @ 3 ft 914 mm
Far @ 5 ft 1524 mm
Weight: 68 kg (150 lbs) Radial @ 2 ft 610 mm
Logging parameters
Recommended Recommended
Min. Hole Diameter:100 mm (3.9“) Logging Speed: 12 m/min 2350 ft/hr *
Max Hole Diameter: 264 mm (10“) * depending on telemetry type
Recorded Curves
Full waveforms of each segment for all monopole and multipole data.
Additional Equipment
Inline Roller Centralizer
Combinability
With most tools working below ANTARES CH 0929 Telemetry system (1333 RSBT) or
ANTARES SH 0928 Telemetry system (1337 RSBT)
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
16 © ANTARES 2019
Cased Hole Product Line
Specifications
Diameter: 43 mm (1.69") Source Type: Neutron Deuterium with
Length: 5742 mm (226”) Tritium Target
Transport Length: 2450 mm (97") Firing frequency: 1kHz
3 sections Neutron output: 1x108n/s
Weight: 39 kg (86 lbs) Neutron energy: 14 MeV
PND electronics
Max. Temp: 150° C (300°F) Detector Type: NaI
Max. Pressure: 100 MPa (14,500 psi) No of Detectors: 2
Measuring Parameters
Measuring Range: Accuracy:
Sigma: 0 - 200 Sigma: + 2% of the reading
Logging parameters
Generator control
Recommended Recommended
Min. Hole Diameter: 70 mm (2.8“) Logging Speed: 6 m/min
Max. Hole Diameter: 300 mm (12“) (1200 ft/hr)
*with data distance 100 mm
Available Curves
SSpectrum 96 channels of 10.42 μs length MSD in cu Mean standard deviation of
LSpectrum 96 channels of 10.42 μs length Sigma
Sigma in cu Formation Sigma corrected Ratio LS/SS
for Salinity RatIn Ratio "SSIn" "LSIn”
BHSigma in cu Borehole Sigma SBkgnd Short Space Background
BH Salinity calculated from BHSigma (Count Rate after switching
Porosity in % Calibrated Porosity from generator off)
Neutron generator
Combinability
With ANTARES C/H instruments, e.g. Multifinger Caliper, CBL
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
© ANTARES 2019 17
2 1/2 " Product Line
Specifications
Diameter: 63.5 mm (2.5") Detector Type: CsI scintillation crystal
Length: 1,700 mm (66.9”)
Weight: 24 kg (53 lbs)
Measure Point (from bottom):
Max. Temp: 175°C (350°F) 336 mm (13’’)
Max. Pressure: 140 MPa (20,000 psi)
Spectrum: 0...3000 keV,
Telemetry required: yes 256 Channels
Top Connector: ANTARES Toolbus
Bottom Connector: ANTARES Toolbus
Measuring Parameters:
Measuring Range: Accuracy*:
GR 0...3000 APi GR + 3 % of measured values*
K 0...50 % K, U, Th + 4 % of measured values*
U 0...500 ppm
Th 0...500 ppm
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 100 mm (4“) Logging Speed: 3-6 m/min
Max Hole Diameter: NA (590 - 1200 ft/hr )
Sample Rate: selectable
Combinability
With ANTARES SHARP family of 2 ½" open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
18 © ANTARES 2019
3 3/8 " Product Line
Specifications
Diameter: 86 mm (3.39") Detector Type: CsI Scintillation Crystal
Length: 2,026 mm (79.92”)
Weight: 44 kg (97 lbs)
Measure Point (from bottom):
Max. Temp: 175°C (350°F) 610 mm (24’’)
Max. Pressure: 140 MPa (20,000 psi)
Spectrum: 0...3000 keV,
Telemetry required: yes 256 Channels
Top Connector: ANTARES Toolbus
Bottom Connector: ANTARES Toolbus
Measuring Parameters:
Measuring Range: Accuracy:
GR 0...3000 APi GR + 3 % of measured values*
K 0...50 % K, U, Th + 4 % of measured values*
U 0...500 ppm
Th 0...500 ppm
* Gamma Ray measurements are radioactive measurements and hence subject to statistical variations.
On a log, these variations between other factors depend on logging speed and filter strength.
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 125 mm (4.92“) Logging Speed: 3-6 m/min
Max. Hole Diameter: NA (590 - 1200 ft/hr)
Sample Rate: selectable
Combinability
With all 3 3/8 " ANTARES O/H Instruments
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
© ANTARES 2019 19
2 1/2 " Product Line
Compensated Neutron
The ANTARES 1483 Compensated Neutron instrument works with an Americium Beryllium source
and two detectors. The source emits high energy neutrons, which undergo scattering in the forma-
tion, lose energy and produce gamma rays. The thermal neutrons are measured by the two detectors
in the tool. The tool can be run in both open and cased holes and in most types of mud. In order to
minimize the borehole effects, the tool is run decentralized.
Specifications
Diameter: 63.5 mm (2.5") Source Type: 241AmBe
Length: 2,390 mm (94”) Detector Type: He-3
Weight: 30 kg (66 lbs) Number of Detectors: 2
Measuring Parameters
Measuring Range: 0 - 100 pu Accuracy: + 1 pu (for 0-10 pu)
+ 7% of recorded value
(above 10 pu)
Logging parameters
Recommended Recommended
Min. Hole Diameter: 100 mm (4“) Logging Speed: 6 m/min
Max. Hole Diameter:380 mm (15“) (1200 ft/hr)
Combinability
With ANTARES SHARP family of 2 ½" open hole tools.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
20 © ANTARES 2019
3 3/8 " Product Line
Compensated Neutron
The ANTARES 1468 Compensated Neutron instrument works with an Americium Beryllium source
and two detectors. The source emits high-energy neutrons, which undergo scattering in the forma-
tion, lose energy and produce gamma rays. The thermal neutrons are measured by the two detectors
in the tool. The tool can be run in both open and cased holes and in most types of mud. In order to
minimize the borehole effects, the tool is run decentralized.
Specifications
Diameter: 92 mm (3.62") Source Type: AmBe241
Length: 2,301 mm (90.6”)
Detector Type: He3
Weight: 57 kg (126 lbs) No of Detectors: 2
Measuring Parameters
Measuring Range: 0 - 100 pu Accuracy: + 1 pu (between 0 -10 pu)
+ 7% of recorded value
(above 10 pu)
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 125 mm (4.9“) Logging Speed: 6 m/min*
Max. Hole Diameter: 410 mm (16“) (1200 ft/hr)
Sample Rate: selectable
Combinability
With all 3 3/8 " ANTARES O/H Instruments
ANTARES is continually updating and improving its high performance and quality logging system and instruments. For this reason the
specifications are subject to change without prior notice.
© ANTARES 2019 21
Cased Hole Product Line
Bottom Temperature
1632 ANTARES Bottom Temperature Instrument is manufactured for performing high precision
temperature measurements in boreholes.
Specifications
Diameter: 43 mm (1.69") Sensors:
Length: 654 mm (25.74") Temperature: PT1000
Measuring Parameters
Temperature
Measuring range: 0 - 175° C
Accuracy: 0.1 °C
Resolution: 0.01 °C
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 65 mm (2.75“) Logging Speed
Max Hole Diameter: NA 25 m/min (4900 ft/hour)
Sample Rate: selectable
Combinability
With all ANTARES C/H Instruments
This instrument must be the bottom tool within a string.
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
22 © ANTARES 2019
Cased Hole Product Line
Specifications
Diameter: 43 mm (1.69") Sensors:
Length: 1,187 mm (46.73") Temperature: PT1000
Length w/Cond: 2,575 mm (101.38") Pressure Gauge: Quartz
opt. Conductivity: 4 electrode array
Weight: 7.6 kg (17 lbs)
Weight w/Cond.: 15 kg (33 lbs) Measure Points (from bottom):
Conductivity: 403 mm (15.87")
Max. Temp: 175°C (350°F) Temperature: 904 mm (35.59")
Max. Pressure: 100 MPa (15,000 psi) Pressure: 1168 mm (45.98")
Measuring Parameters
Temperature Optional
Measuring range: 0 - 175° C Conductivity
Accuracy: 0.1 °C Measuring range: 0 mS/cm...250mS/cm
Resolution: 0.01 °C Resolution: 0.01 mS/cm
Accuracy: 2%
Pressure
Measuring range: 0-100 MPa
Accuracy: 1.25 psi
Resolution: 0.004 psi
Logging Parameters
Recommended Recommended
Min. Hole Diameter: 65 mm (2.75“) Logging Speed
Max Hole Diameter: 400 mm (15.75") 6 m/min (1200 ft/hour)
Sample Rate: selectable
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
© ANTARES 2019 23
Cased Hole Product Line
The ANTARES1503 Digital Free Pipe Instrument detects the movement of a pipe string as
the pipe is stretched, compressed or torqued. No movement is an indication of stuck
pipe.The digital system is calibrated in order to obtain an indication of the percent of free
pipe. Motorized arm assemblies retract in order to allow the instrument to pass through
restrictions. These arms extend to hold the instrument securely in place during
measurement time. The precise positioning of the instrument inside the borehole is
assisted by using a CCL.
Specifications
Upper
Diameter: 35 mm (1.38”) Sensor:
arms
incl. tube protection 43 mm (1.69") Torque
Length : 3550 mm (140") Tension
Transport length: three sections CCL
(Weight: 15.5 kg (34 lbs)
Measure Points from bottom:
Max. Temp: 160°C (320°F) Torque: 360 mm
Max. Pressure: 100 MPa (14,000 psi) Tension: 360 mm
CCL: 1350 mm
Telemetry Required: no
Data transmission: digital
Top Connector: GO1
Electronics
Bottom Connector: none
Measuring Parameters
Measuring Range: Resolution:
Rotation +/- 9° Rotation: 0.01°
Axial movement: +/-2.5 mm Axial movement: 0.001 mm
Logging parameters
Rec. pipe diameter: Recommended
up to 5 1/2” pipe (standard) Logging Speed: NA
5” to 9 5/8” pipe (extended 1)
8 5/8” to 13 3/8” pipe (extended 2)
Assembly
Sensor
Combinability
none
ANTARES is continually updating and improving its high performance and quality Logging system and for this reason the specifications
are subject to change without prior notice.
24 © ANTARES 2019
Contacts
Amr Morsy
Business Development Manager
Email a.morsy@antares-geo.de
ANTARES is continually updating and improving its high performance and quality logging system and for this reason the specifications
are subject to change without prior notice.
© ANTARES 2019 25
One System - One Supplier - One Contact
www.antares-geo.de