Professional Documents
Culture Documents
DATE: 19-Jun-19
Project: ONE & ONLY LE SAINT GERAN
Date: 19-Jun-2019
Page No. i
Introduction
All design calculations are based on relevant codes of practice. References were made to:
A. Wind Loading
Chapter V CP3 Code of Practice For Wind Loading
B. Aluminium
Design Notes
BS 8118 Part 1: 1991 - Structural Use of Aluminium BSI
Material
The aluminium profiles are extruded profiles, extruded as per the following BS namely:
BS 3987 For Anodised Profiles
BS 3900 For Powder Coated
Basic Alloy
The basic alloy for the extruded aluminium profile is the Alloy 6063 T5 to BS 1474.
Physical Properties
Alloy (AA Designation) As Per BS 6063
Temper, T T5
Ultimate strength 131 N/mm2
Yield Strength 68 N/mm2
Modulus Of Elasticity, E 70 N/mm2
Ultimate Shear strength 110 N/mm2
Density 2700 Kg/m3 #######
Design Methodology
The Extruded aluminium profile sections will be checked for the permissible deflection as well as
for load carrying capacity.
An allowable deflection of span/175 (Single - Glazed) will be used.
This limiting value for deflection is critical for glazing generally, though conservative for the extruded
aluminium profiles themselves. It is therefore conservative.
Page No.: 1
WIND
ANGLE, Cpe Cpi Cpi-Cpe Cpe Cpi Cpi-Cpe Local, Cp
α
Page No.: 2
WIND
ANGLE, Cpe Cpi Cpi-Cpe Cpe Cpi Cpi-Cpe Local, Cp
α
Page No: 4
DESCRIPTION
Structural Module is a 3-leaf sliding door. Vertical member equally spaced at 1616mm c/c.
Overall width is 4820mm wide and 2565 mm high as per architect drawing.
LOCATION: GF
DESCRIPTION OF MEMBERS :
ITEM NO. MEMBER REF.OF PROFILES REMARK
1 M1 S590103 Interlocking Profiles 2Nos
Deflection d = (5qsa4)/(384EI)
d= 11.4 mm
span/175
Permissible Deflection, dp (For single laminated glass )
dp 14.7 mm
Deflection check OK
Page No. 6
D.0. CHECK CONNECTION
TO CONCRETE
UDL @ top & Bottom edge = 3.28 KN/m
Capacity of 4.8mm Dia Screw = 1.60 KN
(Refer To Attached Spec)
No of screw required = 2 per metre
Use screw at a spacing of 250mm c/c along perimeter of opening
Total number of screws provided = 20 Along Top & Bot. Edges
Total number of screws provided = 9 Along Vertical Edges
PROJECT: ONE & ONLY LE SAINT GERAN
DATE: 19-Jun-2019
Page No: 7
DESCRIPTION
Structural Module is a 3-leaf sliding door. Vertical member equally spaced at 1616mm c/c.
Overall width is 4820mm wide and 2565 mm high as per architect drawing.
LOCATION: GF
DESCRIPTION OF MEMBERS :
ITEM NO. MEMBER REF.OF PROFILES REMARK
1 M1 NEW HD PROFILE Interlocking Profiles 2Nos
Deflection d = (5qsa4)/(384EI)
d= 6.9 mm
Permissible Deflection, dp
span/250
dp 10.3 mm
Deflection check OK
Page No. 9
D.0. CHECK CONNECTION
TO CONCRETE
UDL @ top & Bottom edge = 3.28 KN/m
Capacity of 4.8mm Dia Screw = 1.60 KN
(Refer To Attached Spec)
No of screw required = 2 per metre
Use screw at a spacing of 250mm c/c along perimeter of opening
Total number of screws provided = 20 Along Top & Bot. Edges
Total number of screws provided = 9 Along Vertical Edges
PROJECT: ONE & ONLY LE SAINT GERAN
DATE: 19-Jun-2019
Page No: 10
DESCRIPTION
Structural Module comprises 4 fix panels with vertical member M1 equally spaced at 1442 mm c/c.
Overall width is 5765mm wide and 2565 mm high as per architect drawing.
LOCATION: FF
DESCRIPTION OF MEMBERS :
ITEM NO. MEMBER REF.OF PROFILES REMARK
1 M1 S480043 1 NOS
Deflection d = (5qsa4)/(384EI)
d= 11.2 mm
Permissible Deflection, dp
span/175 (For single laminated glass)
dp 14.7 mm
Deflection check OK
Page No: 13
DESCRIPTION
Structural Module comprises 4 fix panels with vertical member M1 equally spaced at 1442 mm c/c.
Overall width is 5765mm wide and 2565 mm high as per architect drawing.
LOCATION: FF
DESCRIPTION OF MEMBERS :
ITEM NO. MEMBER REF.OF PROFILES REMARK
1 M1 S480045 1 NOS
Deflection d = (5qsa4)/(384EI)
d= 6.2 mm
Permissible Deflection, dp
span/250 (For Double Glazed)
dp 10.3 mm
Deflection check OK
Page No: 16
DESCRIPTION
Structural module comprises with 4 fix glazed panels and 1 single leaf wooden door 1.4m wide.
Overall width is 5765mm wide and 2565 mm high as per architect drawing.
LOCATION: GF
DESCRIPTION OF MEMBERS :
ITEM NO. MEMBER REF.OF PROFILES REMARK
1 M1 S480045 1 NOS
M2 GMS RHS 120X40X4.5 1 NOS
Deflection d = (5qsa4)/(384EI)
d= 8.9 mm
Permissible Deflection, dp
span/175 (For single laminated glass)
dp 14.7 mm
Deflection check OK
Page No: 18
DESCRIPTION
Structural module comprises with 4 fix glazed panels and 1 single leaf wooden door 1.4m wide.
Overall width is 5765mm wide and 2565 mm high as per architect drawing.
LOCATION: GF
DESCRIPTION OF MEMBERS :
ITEM NO. MEMBER REF.OF PROFILES REMARK
1 M1 S480045 1 NOS
M2 GMS RHS 120X40X4.5 1 NOS
Deflection d = (5qsa4)/(384EI)
d= 4.9 mm
Permissible Deflection, dp
span/250 (For Double Glazed )
dp 10.3 mm
Deflection check OK
#
TECHNICAL DATA SHEET
#
DATA SHEET OF SCREWS