Professional Documents
Culture Documents
Copier Color
Issued by Canon Europa N.V.
Hardware
Location:
Mirror Assembly 1
Subject:
Change in the materials of the Reflector and the height of Frame 1
Detail:
For reasons of production, the material of the Reflector [1] is changed. Additionally, the thickness of the Reflector
is changed from 1mm to 0.7mm. Along with these changes, the height of the face of the Frame 1 [2] on which the
Reflector is mounted is increased by 0.3mm to correct the height of the reflecting surface of the Reflector.
The new type Frame 1 will have the engraved mark A [3] for identification.
T-1
[1] Reflector
(1/2)
iR6800C-038
<Factory measures>
Both the Reflector and Frame 1 will be changed to the new type simultaneously.
Servicing work:
When replacing the Reflector, confirm whether Frame 1 has the engraved mark A or not. For Frame 1 with the mark,
replace with the new type Reflector. For Frame 1 without the mark, replace with the older type Reflector. The older
type Reflectors will continue to be supplied.
Service parts:
Affected machines:
To be informed.
(2/2)