Professional Documents
Culture Documents
Manual DEH-P77MP/EW
ORDER NO.
CRT3072
MULTI-CD/DAB CONTROL HIGH POWER CD/MP3/WMA PLAYER WITH RDS TUNER
DEH-P77MP EW
- This service manual should be used together with the following manual(s):
Model No. Order No. Mech. Module Remarks
CX-3057 CRT3026 S10MP3 CD Mech. Module:Circuit Description, Mech.Description, Disassembly
A
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
B
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
2 DEH-P77MP/EW
1 2 3 4
5 6 7 8
SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. A
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
Caution: B
1. During repair or tests, minimum distance of 13cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
2. A “CLASS 1 LASER PRODUCT” label is affixed to the 3. The triangular label is attached to the mechanism
bottom of the player. unit frame.
CLASS 1 C
LASER PRODUCT
Specifications of laser radiation fields to which human access is possible during service.
Wavelength = 800 nanometers
DEH-P77MP/EW 3
5 6 7 8
1 2 3 4
A CONTENTS
SAFETY INFORMATION ............................................................................................................................................3
1. SPECIFICATIONS .......................................................................................................................................................5
2. EXPLODED VIEWS AND PARTS LIST.......................................................................................................................6
2.1 PACKING...............................................................................................................................................................6
2.2 EXTERIOR.............................................................................................................................................................8
2.3 CD MECHANISM MODULE ...............................................................................................................................10
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...................................................................................................12
3.1 BLOCK DIAGRAM ..............................................................................................................................................12
B
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) ........................................................................................14
3.3 KEYBOARD UNIT ...............................................................................................................................................20
3.4 CD MECHANISM MODULE(GUIDE PAGE).......................................................................................................22
4. PCB CONNECTION DIAGRAM ................................................................................................................................32
4.1 TUNER AMP UNIT .............................................................................................................................................32
4.2 PANEL UNIT .......................................................................................................................................................36
4.3 KEYBOARD UNIT ...............................................................................................................................................37
4.4 CD MECHANISM MODULE ...............................................................................................................................38
5. ELECTRICAL PARTS LIST ........................................................................................................................................40
6. ADJUSTMENT .........................................................................................................................................................47
C 6.1 JIG CONNECTION DIAGRAM ...........................................................................................................................47
6.2 CD ADJUSTMENT .............................................................................................................................................48
6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT................................................................50
6.4 ERROR MODE ....................................................................................................................................................52
6.5 SYSTEM MICROCOMPUTER TEST PROGRAM...............................................................................................53
7. GENERAL INFORMATION .......................................................................................................................................54
7.1 DIAGNOSIS ........................................................................................................................................................54
7.1.1 DISASSEMBLY ..............................................................................................................................................54
7.1.2 CONNECTOR FUNCTION DESCRIPTION ....................................................................................................57
D 7.2 PARTS .................................................................................................................................................................58
7.2.1 IC ....................................................................................................................................................................58
7.2.2 DISPLAY.........................................................................................................................................................70
7.3 OPERATIONAL FLOW CHART...........................................................................................................................71
7.4 CLEANING ..........................................................................................................................................................72
8. OPERATIONS ...........................................................................................................................................................73
4 DEH-P77MP/EW
1 2 3 4
5 6 7 8
1. SPECIFICATIONS A
DEH-P77MP/EW 5
5 6 7 8
1 2 3 4
D
NOTE:
- Parts marked by “*” are generally unavailable because they are not in our Master Spare Parts List.
- Screws adjacent to ∇ mark on the product are used for disassembly.
- For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
6 DEH-P77MP/EW
1 2 3 4
5 6 7 8
DEH-P77MP/EW 7
5 6 7 8
1 2 3 4
2.2 EXTERIOR
8 DEH-P77MP/EW
1 2 3 4
5 6 7 8
DEH-P77MP/EW 9
5 6 7 8
1 2 3 4
B 1
2
1
C
2
1
2 1
1
2
D 1
3
1
2
2
1 1
1
1
1GEM1024
2GEM1045
3GEM1035
D
C
10 DEH-P77MP/EW
1 2 3 4
5 6 7 8
Mark No. Description Part No. Mark No. Description Part No.
1 CD Core Unit(S10MP3) CWX2745 46 Rack CNV7199
2 Connector(CN101) CKS4182 47 Holder CNV7201
3 Connector(CN901) CKS4021 48 Holder CNV7202
4 Screw BMZ20P035FTC 49 Arm CNV7203
5 Screw BSZ20P040FTC 50 Gear CNV7207
91 Screw IMS26P030FMC
F
92 Connector(CN902) CKS2195
DEH-P77MP/EW 11
5 6 7 8
1 2 3 4
7 6 13 5 10 9 8 11 14 18 19 20 21
FM/AM TUNER UNIT
WC
CE2
ROM_VDD
SL
DI
CK
CE1
LDET
DO
RDS_CK
RDS_DATA
RDS_LOCK
RDS_HSLK
IC 3 EEPROM IC 5
←
5.0V 5V 3.3V
OSC LPF
ANTENNA CN401
AM ANT FMRF
B 1
1 ATT
2 Rch
24
IC 2
IC 1 2.5V
FM ANT
3 3.3V
ATT Lch
23
FMRF MIXER, IF AMP DET, FM MPX,
RDS DECODER
RF adj
ANT adj
T51 CF52
CF51
AUDIOGND
OSCGND
IC 4
VDD_3.3
RFGND
DGND
←
3.3V 3.3V 2.5V 2.5V
VCC
NC
C 2 12 15 22 16 4 17
IC 751
TUN 3.3V MCK NJM4580M
DAC5V REGULATOR MCK3.3V REGULATOR 5 DAC
Q801 NJM2872F33 SYS 8.5V DOUT,LRCK,BCK TUN L
X771 IC 731 16 5 7
BU
1
PCM1716E-3 CDDAL
Q802 5
IC 801 BUS+L BUS+L
IC 771 5 IC 772 5
3 BUS-L BUS-L
2 4 2 4 MCK CD L
dacrst,DACMD,
DAC5V
DACMC,DACML
CD5VON TC7SU04FU TC7S04FU CN702 BZ 601
3 VST,VC
BUZZER
CN101
D CD CORE UNIT(S10MP3)
IC 202 CN902 MCK
3 7
11
LEVEL
22
MSM51V4265EP-70TS 5 IP-BUS DRIVER
DOUT,LRCK,
1 BUS- PEE 90
5 1 TX 28 OUTLV
PICKUP UNIT DRAM
BCK
8 IC 101 TX
IC 501(1/2) 6 HA12187FP 2 RX 27 MUTE
85
(SERVICE)(P10) UPD61002GC BUS+
8
RX
13
V3R3D 38 IPPW 79 XIN
CN101 Q101 CN901 IPPW
X601
LASER XTAL1 CN701
D DIODE LD-
15 15
142
LD IC 201 LOUT
35 L-OUT
12 16 XOUT
11
Q101
MD
UPD63760GJ MUTE Q602 1
141 BU SYSPW
5 5 PD
Q603
RF-AMP,CD DECODER,
AC,BD MP3 DECODER,
HOLOGRAM SYSTEM CONTROLLER
80
UNIT
F,E
DIGITAL SERVO / DATA PROCESSOR ASENBO
68
FO+ FOP KEYD
FOCUS ACT. 1 1
TO+ TOP 92
4 4 IC 601(2/2) KEYAD
MONITOR TRACKING ACT. WINT, 42 43
DIODE TD/FD SD/MD WAIT, PD5854A
LD+
14 14 RFOK
12 X202 CD5VON
FOP CD Q701
BRST,BRXEN,BSRQ
13
TOP DRIVER 14 VCC
VDD BDATA,BSCK,
SPINDLE
IC 301 CD5VON,DSPMUTE,
MOTOR M BA5996FM IC 702 DSPOKOUT,CDA/D
FLPILM
40
16 XWINT, 42
SOP XWAIT, TC74VHCT08AFT
15 EJTIN
SOM FOK
18
LOAD/ CARRIAGE LCOP 33
MOTOR M 17
LCOM LOEJ
22 28 CDMUTE
17
LOEJ
LCDPW
swvdd
ILMPW
ADENA
dsens
KYDT
DPDT
ROT1
ROT0
9 26 BRST,BRXEN,BSRQ
CONT CONT BU
BDATA,BSCK, Q8
CD CONTROLLER CD5VON,DSPMUTE, Q782 20 34 39 33 38 35 36 41
E 93
CLAMP
DSPOK,CDA/D VD1 5 22 BU
75
IC 701
VD1 VD
DSCSNS PE5352B 6 23
77
HOME WMA DECODER
HOME
25
CD3VON IC 501(2/2) Q781
24
VDCONT
UPD61002GC
X2 X1
VDD
12EJ DISC 35 36
CLAMP SENSE 8EJ SENSE X701 VDCONT
SENSE SENSE 18 7
+3.3V REGULATOR
1
1 4,5
V3R3D
4 IC 203 2 VD2 3VDD IC 703 7 21
1 VDD
BA033SFP
S-812C33AUA-C2N
+3.3V REGULATOR
VDD
1
Q783
V2R5
4 IC 502 2 VD2 VD2
4 24 VD
BA25BC0WFP
+2.5V REGULATOR
F
12 DEH-P77MP/EW
1 2 3 4
5 6 7 8
S-80835CNMC-B8U
CN351
IC 381
10 FL 9 16 FL 4
FRONT L
reset PA2028A Q351
ce@ 69
tunce@
CE1 70 PL 7 18 PL 8
TUNPCE1
DO 98 NON-FAD/SW L
TUNPDI Q352
DI 99
TUNPDO
CK 100
TUNPCK VDD REGULATOR
17 Q901
ldet
95 SL VDD
Q902 B
SYSTEM CONTROLLER
IC 601(1/2) 67
PD5854A DALMON
CN981
Q401
RDS_LOCK 45 BACKUP SENSE BU
rdslk
73 FUSE
BSENS 16 16
BACK UP
BU
RDS_HSLK 44 10A
rds%&k Q931
72 ACC
ASENS 14 14
Q402 ACC
DAC5V
53
DAC5V
TELEPHONE MUTE
C
ELECTRONIC VOLUME/ MICROPHONE 15 15
BU GND
SOURCE SELECTOR
13
MIC 231
MIC POWER AMP 6,20
TUN L 42 MICIN
7 IN3-L 23
12 FL- 7 7
CDDAL 40 IN1-L PL FL-
21
BUS+L 43 IC 131 10 14 IC 301 FL+ 5 5
IN4+L FL FLIN 3 FL+
BUS-L 44 PML009A PAL007A RL- 8 8
IN4-L 11 12 RL-
RL RLIN 5
CD L 5 41 RL+ 6 6
IN2-L SEL_OUT_L MUTE STBY RL+
B.REMOTE
1 22 4 25
11 11
B.REM
VST,VCK,VDT
MUTE
Q502
LEVEL INDICATOR IC 752 BU SYS 8.5V REGULATOR
Q913 Q911
7 6 SYS 8.5V BU
MUTE
90 Q301
NJM4558MD
85
13 Q912 RR RR
Q501
- +
X601
11 BACK
UP
FR
-
FR
+ D
1 SYSPW B. FL FL
ILM REM
- +
TUNER 3.3V REGULATOR RL RL
IC 921 GND ACC
- +
3 1
TUN 3.3V SYS 8.5V
68
92 CN821
BA033FP KEYD 2
KEYAD 3
CN841
1
BU 5 5
Q841
6 6
40
42
8 8 B PANEL UNIT C KEYBOARD UNIT
S1970
9 9
EJECT CN1801
Q871
ILB ILB
BU 7 7 4 9
Q872
ILB
VOLUME/SRC LCD BACKLIGHT ILLUMINATION E
S1814
ROT0 13 ROT0 ROT0 2 4
13 9 4
ROT1 12 ROT1 ROT1 1 5
12 7 6
RESET DIMMER
3 S-80834CNMC-B8T Q1801
Q891
SWDVDD SW5V 2 1
VDD 2 2 2 11 IC 1802
REMOTE CONTROL SENSOR
4
kst#
kdt@
OPT IN IC 1804
TSOP4840SB1 1
11 5 8 7
DPDT DPDT
DIM
REMIN
reset
VDD
DEH-P77MP/EW 13
5 6 7 8
1 2 3 4
A
PARTS LIST”.
A-a
Large size FM
A-a A-b
SCH diagram AM
IP
CDDA
MP3,WMA
CN901 D CN902
D
FM/AM TUNER UNIT
GRILLE
NOTE :
EJECT
Symbol indicates a resistor.
C
14 A B DEH-P77MP/EW
3 4
1 2
5 6 7 8
A-b
A
4
3 FRONT
R CH
1
2 FRONT
L CH
8
7 SUBWOOFER
R CH
5
6 SUBWOOFER
L CH
B
FM:+15.1dBs
FM:+4.6dBs AM: +6.6dBs
AM: -3.9dBs IP:+18.8dBs
IP:+8.3dBs CD:+18.6dBs
CD:+8.1dBs (CDDA,MP3,WMA)
(CDDA,MP3,WMA)
1
REAR
2 L CH
3 REAR
R CH
4
D
600µH
>
CEK1208
10A BACKUP
GND
ACC
ILL
B.REM
TEL
RL—
FL—
RL+
FL+
RR—
FR—
RR+
FR+
FM:+30.6dBs
AM:+22.1dBs
IP:+34.3dBs
CD:+34.1dBs
(CDDA,MP3,WMA)
RR RR
- +
BACK FR FR
UP - +
ILL B.
REM
FL
-
FL
+ E
GND ACC RL RL
- +
DEH-P77MP/EW A 15
5 6 7 8
F
E
B
A
D
C
16
A-a A-b
A-a
1
1
A-b
FM:-16.5dBs
AM:-27.0dBs
IP: +2.2dBs
CDDA: +5.0dBs
MP3,WMA: 0dBs
2
2
DEH-P77MP/EW
1
3
3
CN901 D CN902
4
4
5
5
6
6
GRILLE
DEH-P77MP/EW
NOTE :
EJECT
Symbol indicates a resistor. Decimal points for resistor
C
7
7
No differentiation is made between chip resistors and and capacitor fixed values
discrete resistors. are expressed as :
Symbol indicates a capacitor. 2.2 ← 2R2
No differentiation is made between chip capacitors and 0.022 ← R022
CN1801
discrete capacitors.
B
4
PANEL UNIT
8
8
A-a A-b
A-a B
A-b
17
F
E
B
A
D
C
F
E
B
A
D
C
18
A-a A-b
1
1
A-b
A TUNER AMP UNIT
Bs
Bs
Bs
Bs
Bs
2
2
3 FRONT
R CH
1
2 FRONT
L CH
8
7 SUBWOOFER
R CH
5
6 SUBWOOFER
L CH
FM:+15.1dBs
FM:+4.6dBs AM: +6.6dBs
AM: -3.9dBs IP:+18.8dBs
IP:+8.3dBs CD:+18.6dBs
CD:+8.1dBs (CDDA,MP3,WMA)
DEH-P77MP/EW
(CDDA,MP3,WMA)
1
1
REAR
2 L CH
3
3
3 REAR
R CH
4
4
4
5
5
600µH
>
CEK1208
10A BACKUP
GND
ACC
ILL
B.REM
TEL
RL—
FL—
RL+
FL+
RR—
FR—
RR+
FR+
FM:+30.6dBs
AM:+22.1dBs
IP:+34.3dBs
6
6
CD:+34.1dBs
(CDDA,MP3,WMA)
RR RR
- +
BACK FR FR
UP - +
B. FL FL
ILL
3
REM - +
GND ACC RL RL
- +
DEH-P77MP/EW
7
7
8
8
A-a A-b
A-b
19
F
E
B
A
D
C
1 2 3 4
RESET REMOTE
CONTROL
SENSOR
C
20 DEH-P77MP/EW
1 2 3 4
5 6 7 8
C KEYBOARD UNIT
SELECT
CN1951
B
D
TA SOURCE/
VOLUME
C
DEH-P77MP/EW 21
5 6 7 8
1 2 3 4
A D-a
F
T
S
F
T
S
PICKUP UNIT(SERVICE)(P10)
F F
F F
T T
T T
F F
T T
T T
F F
T
T
F 0
F
C CN101 !
SWITCHES:
CD CORE UNIT
S901 : HOME SWITCH.....ON-OFF
S902 : CLAMP SWITCH....ON-OFF
S903 : DSCSNS SWITCH....ON-OFF
S904 : 12EJ SWITCH....ON-OFF
D S905 : 8EJ SWITCH....ON-OFF
The underlined indicates the switch position.
1 @
S
T
7 5
C
F
6 3
E
SPINDLE MOTOR
8 2
S
M1 CXB6007 S F
LOADING/CARRIAGE
MOTOR F
C
T
C
C
T
S
M2 CXB8933 C
S
22 D DEH-P77MP/EW
3 4
1 2
5 6 7 8
A
CN702
CN902
9
$
^
%
C
SIGNAL LINE
F
FOCUS SERVO LINE
T
TRACKING SERVO LINE
C CARRIAGE SERVO LINE
S SPINDLE SERVO LINE
D
&
CN901
E
A
CN701
DEH-P77MP/EW D 23
5 6 7 8
F
E
B
A
D
C
24
D-a
A-a D-b
1
1
D-a
D-b
2
2
F
T
C
S
PICKUP UNIT(SERVICE)(P10)
DEH-P77MP/EW
#
3
3
F F
F F
T T
T T
F F
T T
T T
F F
T
T
F 0
F
4
4
CN101 !
SWITCHES:
CD CORE UNIT
1
5
5
6
6
1 @
2
S
T
7 5
C
F
6 3
DEH-P77MP/EW
SPINDLE MOTOR
8 2
S
M1 CXB6007 S F
3
LOADING/CARRIAGE
MOTOR F
C
T
C
7
7
C
T
S
M2 CXB8933 C
S
4
8
8
D-a
A-a D-b
D-a
D-b
25
F
E
B
A
D
C
F
E
B
A
D
C
26
D-a D-b
1
1
D-b
D CD CORE UNIT (S10MP3)
2
2
DEH-P77MP/EW
3
3
A
CN702
CN902
9
$
^
%
4
4
SIGNAL LINE
F
FOCUS SERVO LINE
T
TRACKING SERVO LINE
SIGNAL LINE
F
FOCUS SERVO LINE
T
TRACKING SERVO LINE
C CARRIAGE SERVO LINE
S SPINDLE SERVO LINE
5
5
&
6
6
CN901
DEH-P77MP/EW
A
CN701
7
7
8
8
D-a D-b
D-b
27
F
E
B
A
D
C
1 2 3 4
- Waveforms Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65V)
Spindle waveform during "Play" Spindle waveform during "Play"(Magnified) RF eye pattern
28 DEH-P77MP/EW
1 2 3 4
5 6 7 8
& LOUT 1V/div 200µs/div 1 DSCSNS 5V/div 500ms/div 1 DSCSNS 5V/div 10µs/div
* ROUT 1V/div 2 CLCONT 5V/div 2 CLCONT 5V/div
3 LOEJ 5V/div 3 LOEJ 5V/div E
Analog Audio(sine wave, 1kHz) When "Eject"(12cm CD) When "Eject"(8cm CD)
DEH-P77MP/EW 29
5 6 7 8
1 2 3 4
When switching to CD-ROM from CD-DA When switching to CD-DA from CD-ROM
(BAND key) (BAND key)
Ref.: Ref.:
REFO REFO
Mode: Mode:
Normal Normal
B
30 DEH-P77MP/EW
1 2 3 4
5 6 7 8
DEH-P77MP/EW 31
5 6 7 8
1 2 3 4
SIDE A
B
SIDE B
P.C.Board Chip Part
D CN902
DSENS
A
32 DEH-P77MP/EW
1 2 3 4
5 6 7 8
IC,Q
SIDE A
RCA
B
ANTENNA
B CN1950
F
D CN901 FRONT
A
DEH-P77MP/EW 33
5 6 7 8
1 2 3 4
A
A TUNER AMP UNIT
IC,Q
A
34 DEH-P77MP/EW
1 2 3 4
5 6 7 8
A
SIDE B
A
DEH-P77MP/EW 35
5 6 7 8
1 2 3 4
CN1801
C CN1901
EJECT
CN841
A CN831
B
36 DEH-P77MP/EW
1 2 3 4
5 6 7 8
SELECT
AUDIO
B
CN1951
BAND
FUNC
60
6
50
C
40
5
30
4
20
D
3
10
LCD1801
2
1
E
DISP
SOURCE/
VOLUME
TA
EQ
C
DEH-P77MP/EW 37
5 6 7 8
1 2 3 4
M2
LOADING
B /CARRIAGE MOTOR
M1
SPINDLE MOTOR REFO1
A CN701
HOME
PICKUP UNIT
(SERVICE)(P10)
E
A CN702
D
38 DEH-P77MP/EW
1 2 3 4
5 6 7 8
8EJ 12EJ
CLAMP
DSCSNS
B
D
DEH-P77MP/EW 39
5 6 7 8
1 2 3 4
40 DEH-P77MP/EW
1 2 3 4
5 6 7 8
=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
--- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ ------------------------- A
RESISTORS R 403 RS1/16S681J
R 404 RS1/16S681J
R 101 RS1/16S181J R 405 RS1/16S681J
R 102 RS1/16S181J R 406 RS1/16S681J
R 103 RS1/16S223J R 407 RS1/16S681J
R 104 RS1/16S223J
R 105 RS1/16S102J R 410 RAB4C223J
R 501 RS1/16S103J
R 106 RS1/16S102J R 502 RS1/16S473J
R 107 RS1/16S150J R 503 RS1/16S102J
R 108 RS1/16S470J R 601 RS1/16S0R0J
R 109 RS1/16S101J
R 110 RS1/16S101J R 602 RS1/16S473J
R 603 RS1/16S472J
R 111 RS1/16S103J R 604 RS1/16S104J B
R 112 RS1/16S222J R 605 RS1/16S102J
R 113 RS1/16S562J R 606 RS1/16S102J
R 114 RS1/16S332J
R 131 RS1/16S102J R 607 RS1/16S102J
R 608 RS1/16S473J
R 132 RS1/16S102J R 609 RS1/16S473J
R 133 RD1/4PU102J R 610 RS1/16S473J
R 134 RD1/4PU102J R 611 RS1/16S473J
R 135 RD1/4PU101J
R 136 RD1/4PU101J R 612 RS1/16S0R0J
R 613 RS1/16S0R0J
R 137 RD1/4PU101J R 614 RS1/16S104J
R 138 RD1/4PU101J R 615 RS1/16S104J
R 139 RD1/4PU101J R 616 RS1/16S104J
R 140 RD1/4PU101J
R 141 RAB4C102J R 618 RS1/16S104J C
R 619 RS1/16S473J
R 231 RS1/16S222J R 620 RS1/16S102J
R 233 RS1/16S560J R 622 RS1/16S473J
R 234 RS1/16S104J R 623 RS1/16S103J
R 235 RS1/16S104J
R 236 RS1/16S474J R 624 RS1/16S681J
R 625 RS1/16S681J
R 237 RS1/16S474J R 626 RS1/16S681J
R 238 RS1/16S684J R 643 RS1/16S473J
R 239 RS1/16S474J R 651 RS1/16S102J
R 301 RS1/16S153J
R 302 RS1/16S103J R 652 RS1/16S183J
R 703 RS1/16S682J
R 303 RS1/16S103J R 704 RS1/16S682J
R 304 RS1/16S331J R 706 RS1/16S682J
R 351 RD1/4PU820J R 707 RS1/16S682J D
R 352 RD1/4PU820J
R 353 RD1/4PU820J R 708 RS1/16S473J
R 709 RS1/16S221J
R 354 RD1/4PU820J R 710 RS1/16S221J
R 355 RD1/4PU820J R 711 RS1/16S102J
R 356 RD1/4PU820J R 712 RS1/16S221J
R 361 RS1/16S223J
R 362 RS1/16S223J R 713 RS1/16S221J
R 714 RS1/16S221J
R 363 RS1/16S223J R 715 RS1/16S221J
R 364 RS1/16S223J R 731 RS1/16S101J
R 365 RS1/16S223J R 732 RS1/16S101J
R 366 RS1/16S223J
R 367 RS1/16S471J R 733 RS1/16S101J
R 734 RS1/16S102J
R 368 RS1/16S471J R 735 RS1/16S102J E
R 369 RS1/16S471J R 736 RS1/16S102J
R 370 RS1/16S471J R 737 RS1/16S102J
R 371 RS1/16S471J
R 372 RS1/16S471J R 751 RS1/16S123J
R 752 RS1/16S123J
R 373 RS1/16S103J R 753 RS1/16S153J
R 374 RS1/16S103J R 754 RS1/16S153J
R 375 RS1/16S103J R 755 RS1/16S123J
R 376 RS1/16S103J
R 377 RS1/16S103J R 756 RS1/16S123J
R 757 RS1/16S473J
R 378 RS1/16S103J R 758 RS1/16S563J
R 381 RS1/16S103J R 771 RS1/16S152J
R 382 RS1/16S103J R 772 RN1/16SE1003D
R 401 RS1/16S681J
R 402 RS1/16S681J F
DEH-P77MP/EW 41
5 6 7 8
1 2 3 4
=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
A --- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ -------------------------
R 781 RD1/4PU221J C 140 10µF/16V CCH1563
R 782 RD1/4PU221J C 141 CCSQCH152J50
R 785 RD1/4PU121J C 142 CCSQCH152J50
R 801 RS1/16S332J C 143 CCSQCH152J50
R 821 RS1/16S102J C 144 CCSQCH152J50
42 DEH-P77MP/EW
1 2 3 4
5 6 7 8
=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
--- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ ------------------------- A
C 390 CKSRYB105K10 C 804 CEJQ220M6R3
C 391 4.7µF/25V CCH1562 C 805 CKSRYB103K50
C 392 CEJQ101M16 C 806 CKSRYB224K10
C 393 CASAQ3R3M16 C 807 CKSRYB104K16
C 394 33µF/25V CCH1564 C 811 CKSRYB104K16
C 784 CKSRYB473K25
RESISTORS
C 785 CEJQ101M16
R 1801 RS1/16S2701D
C 801 CKSRYB473K25
R 1802 RS1/16S5600D
C 802 10µF/16V CCH1509
R 1803 RS1/16S822J
C 803 47µF/6.3V CCH1561
R 1804 RS1/16S102J
R 1805 RS1/16S2R2J
F
DEH-P77MP/EW 43
5 6 7 8
1 2 3 4
=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
A --- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ -------------------------
R 1806 RS1/16S121J Q 601 Transistor DTC323TK
R 1807 RS1/16S472J Q 602 Transistor DTC323TK
R 1809 RAB4C104J Q 603 Transistor 2SB709A
R 1810 RS1/16S473J Q 701 Transistor UN2111
R 1812 RS1/16S222J D 101 Diode 1SS355
44 DEH-P77MP/EW
1 2 3 4
5 6 7 8
=====Circuit Symbol and No.===Part Name Part No. =====Circuit Symbol and No.===Part Name Part No.
--- ------ ------------------------------------------ ------------------------- --- ------ ------------------------------------------ ------------------------- A
R 231 RS1/16SS0R0J R 740 RS1/16SS473J
R 232 RS1/16SS182J R 741 RS1/16SS104J
R 233 RS1/16SS0R0J R 743 RS1/16SS104J
R 237 RS1/16SS104J R 745 RS1/16SS473J
R 238 RS1/16SS473J R 746 RS1/16SS104J
DEH-P77MP/EW 45
5 6 7 8
1 2 3 4
C 301 CKSSYB331K50
C 302 CKSSYB331K50
C 303 CKSSYB472K25
C 304 CKSSYB472K25
C 305 CEV101M16
C 306 CKSRYB224K16
C 501 CKSSYB104K10
B C 502 CKSSYB471K50
C 503 CKSSYB104K10
C 504 47µF/6.3V CCH1436
C 505 CKSRYB224K16
C 506 CKSSYB104K10
C 508 CKSSYB104K10
C 509 CKSSYB104K10
C 510 CKSSYB104K10
C 511 CKSSYB104K10
C 601 CCSRCH102J50
C 602 CCSRCH102J50
C 603 4.7µF/25V CCH1508
C 604 4.7µF/25V CCH1508
C C 701 CKSSYB104K10
C 702 CKSSYB471K50
C 703 CKSSYB103K16
C 704 CEV1R0M50
C 705 CKSSYB104K10
C 706 CKSSYB471K50
C 707 CKSSYB104K10
C 708 CKSSYB104K10
C 710 CKSSYB104K10
C 711 10µF/10V CCH1349
C 712 CKSRYB224K16
C 713 CKSSYB104K10
C 714 CKSSYB104K10
C 715 CKSSYB103K16
D C 716 CKSSYB103K16
C 901 CKSSYB104K10
C 903 CCSRCH101J50
46 DEH-P77MP/EW
1 2 3 4
5 6 7 8
6. ADJUSTMENT A
RUBBER BAND
CN1951
B
GGD1316
CN1901
RUBBER BAND
DEH-P77MP/EW 47
5 6 7 8
1 2 3 4
A
6.2 CD ADJUSTMENT
48 DEH-P77MP/EW
1 2 3 4
5 6 7 8
- Flow Chart
[KEY] [4]+[6]+Reset or
[4]+[6]+BU+ACC
Contents
A
Test Mode In
Display
[CD]or[SOURCE]
Source On
[BAND] [2]
*2) Focus Close → S.Curve check setting → F EQ measurement setting [BAND] Power On / Off
TRK 00 MIN 00 SEC 00 TRK 01 MIN 01 SEC 01 TRK 02 MIN 02 SEC 02
(TRK 99 MIN 99 SEC 99) CRG + / TR Jump +
[→]
(Direction of the external surface)
*3) F.Offset Display → T.Offset Display → Switch to the order of the original display CRG - / TR Jump -
[←]
(Direction of the internal surface)
U.CLS and AGC and Applicable servomechanism /
[1]
*4) 1TR / 32TR / 100TR AGC, AGC display setting
[2]
RF Gain switching / Offset adjustment display / E
T.Balance adjustment / T.Open
*5) Single TR → 32TR → 100TR → CRG Move Close, S.Curve / Rough Servo and RF AGC /
[3]
9x(8x) : 91(81) 92(82) 93(83) 94(84) F, T, RF AGC
SPDL 1X / 2X switching
[4]
*6) Only at the time of CRG move, 100TR jump As for the double speed (2x), audio output cannot be supported.
1st - ON : ERR count Beginning (30Sec)
[5] Error Rate measurement
2nd - ON : BER display data [%]
*7) TRK/MIN/SEC → F.AGC → T.AGC → F Bias → RF AGC F.Mode switching / Tracking Close /
[6]
CRG • TR Jump switching
DEH-P77MP/EW 49
5 6 7 8
1 2 3 4
A • Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.
• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
• Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
B
track search operations, or taking a long time for track searching.
• Method :
• Measuring Equipment • Oscilloscope, Two L.P.F.
• Measuring Points • E, F, REFO1
• Disc • ABEX TCD-782
• Mode • TEST MODE
CD CORE UNIT(S10MP3)
C REFO1
L.P.F.
Xch Ych
E 100kΩ
Oscilloscope
VREF 390pF
F 100kΩ
VREF 390pF
L.P.F.
D
F
E
• Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
difference is within 75° . Refer to the photographs supplied to determine the phase angle.
E 5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
50 DEH-P77MP/EW
1 2 3 4
5 6 7 8
A
0° 30°
45° 60°
75° 90°
DEH-P77MP/EW 51
5 6 7 8
1 2 3 4
- Error Messages
A
Error is displayed with number for Error cause when CD is inoperative or stops with Error during operation.
The purpose is to reduce nonsense calls from users as well as to assist all related analysis and repair for defects
at service station.
*) In case of OEM, Error display will follow the specification defined by OEM makers.
52 DEH-P77MP/EW
1 2 3 4
5 6 7 8
1. PCL output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode can-
celled), shift the TESTIN terminal to H. The clock signal is output from the PCL terminal (Pin 37). The frequency of the
clock signal is 312.5KHz that is one 32nd of the fundamental frequency.
DEH-P77MP/EW 53
5 6 7 8
1 2 3 4
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A 7.1.1 DISASSEMBLY
- Removing the Case (not shown)
C 1
2 1 2
Grille Assy
Fig.1
D 2
1 Remove the screw. 2
2
3 3 3
54 DEH-P77MP/EW
1 2 3 4
5 6 7 8
1. Remove the 5 screws from the rear side of the detachable grille.
A
2. The grille and the rear cover are locked with 6 hooks. B
Inner Grille
Aluminum Panel E
Lightly pushing.
Rear Cover
DEH-P77MP/EW 55
5 6 7 8
1 2 3 4
Do not squeeze.
Carriage Mechanism
B C
A
Damper
Lower Frame
Damper
D B Damper
F
Inner Holder
Planet Gear
56 DEH-P77MP/EW
1 2 3 4
SUBWOOFER OUTPUT or REAR OUTPUT
NON FADING OUTPUT
5
5
SW F 1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
8 9 10 11
5 6 7
6
6
1 2 3 4
10A
DEH-P77MP/EW
3. FR- 11. B.REM 3. GND
4. RR- 12. ILM 4. NC
5. FL+ 13. NC 5. BUS-
6. RL+ 14. ACC 6. GND
7
7
8
8
57
F
E
B
A
D
C
1 2 3 4
7.2 PARTS
7.2.1 IC
PD2068B UPD63760GJ
A
S-80834CNMC-B8T UPD61002GC
TSOP4840SB1 PE5352B
S-80835CNMC-B8U MSM51V4265EP-70TS
NJM2872F25 S-812C33AUA-C2N
PD5854A BA25BC0WFP
31
C C MOS
51 30 L LCD C output
80 1
81
100
58 DEH-P77MP/EW
1 2 3 4
5 6 7 8
S-80834CNMC-B8T TSOP4840SB1
A
NC2 NC1
5 4
VD D Control
Input Circuit
O UT
+
Band Demodu-
PIN AGC Pass lator
VREF
B
VSS
1 2 3
OUT VDD VSS
1 2 3
OUT GND VCC
* S-80835CNMC-B8U NJM2872F25
5 4 5 4
VD D
D
Thermal
Protection
O UT
+
Bandgap
Reference
VREF
VSS 1 2 3
VIN GND CONTROL
1 2 3 E
OUT VDD VSS
DEH-P77MP/EW 59
5 6 7 8
1 2 3 4
- Pin Functions(PD5854A)
Pin No. Pin Name I/O Function and Operation
A 1 SYSPW O System power control output
2 VST O EVOL : Strobe output
3 VDT O EVOL : Data output
4 VCK O EVOL : Clock output
5 NC Not used
6 BYTE External data bus width change input
7 CNVSS Processor mode change input
8 TELIN I TEL : Cellular mute input
9 NC Not used
10 RESET Reset input
11 XOUT Clock output
12 VSS GND
B 13 XIN Clock input
14 VCC Power supply input
15 NC Not used
16 rck I RDS : Clock input
17 ldet I RDS : PLL lock detection input
18 NC Not used
19 RX2 I IPBUS : Input 2
20 LCDPW O LCD power supply output
21 NC Not used
22 PEE O PEE sound output
23 NC Not used
24 brst O PBUS : Reset output
C
25 brxen I/O PBUS : Communication input/output
26 bsrq I PBUS : Communication request input
27 RX I IPBUS : Input
28 TX O IPBUS : Output
29 BSO O PBUS : Output
30 BSI I PBUS : Input
31 BSCK O PBUS : Clock
32 NC Not used
33 DPDT O GRILL : Data output
34 KYDT I GRILL : Data input
35, 36 ROT1, 0 I Rotary encoder pulse input1, 0
D 37 PCL O Output for clock adjustment
38 swvdd O GRILL : Chip enable output
39 dsens I Detach sense input
40 FLPILM O Illumination output inside flap
41 ILMPW O Illumination output
42 ejtin I Eject key input
43 NC Not used
44 rds%&k I RDS : 57kHz pulse count input
45 rdslk I RDS : Lock signal input
46 RDT I RDS : Data input
47 NC Not used
48 EMPH I Emphasis information input of CD
E
49 CDA/D I CD analog or digital output discrimination input H : Analog/L : Digital
50 DSPOK O DAC operation possible output(Output to CD microcomputer)
51 DSPMUTE I MUTE request input from CD
52 CD5VON I Trigger input of MCK output to CD
53 DAC5V O DAC power supply control output
54 NC Not used
55 RECIVE O For RDS circuit operation check
56 CSENSOUT O FLAP open : H/FLAP close : L
57-59 NC Not used
60 VCC Power supply input
61 NC Not used
F 62 VSS Power supply input
63 dacml O Mode control latch output for DAC
60 DEH-P77MP/EW
1 2 3 4
5 6 7 8
D
* PD5854A
50
26
51 25
75 1
100
76
DEH-P77MP/EW 61
5 6 7 8
1 2 3 4
62 DEH-P77MP/EW
1 2 3 4
5 6 7 8
* UPD63760GJ E
72
37
73 36
108 1 F
109
144
DEH-P77MP/EW 63
5 6 7 8
1 2 3 4
64 DEH-P77MP/EW
1 2 3 4
5 6 7 8
*UPD61002GC
100
76
1 75
25 51
D
26
50
DEH-P77MP/EW 65
5 6 7 8
1 2 3 4
66 DEH-P77MP/EW
1 2 3 4
5 6 7 8
* PE5352B
Format Meaning
C CMOS
50
26
51 25
75 1
100
76
DEH-P77MP/EW 67
5 6 7 8
1 2 3 4
* MSM51V4265EP-70TS * S-812C33AUA-C2N
A
VCC 1 44 VSS
DQ1 2 43 DQ16
DQ2 3 42 DQ15
DQ3 4 41 DQ14
DQ4 5 40 DQ13
VCC 6 39 VSS
DQ5 7 A0-A8 :Address input 38 DQ12
ras : Row address strobe
DQ6 8 lcas : Lower column address strobe 37 DQ11 Reference
DQ7 ucas : Upper column address strobe Voltage
B 9 36 DQ10
DQ1-DQ16 : Data input/data output
DQ8 10 oe : Output enable 35 DQ9
we : Write enable
VCC : Power supply
VSS : GND
NC : No connection
NC 13 32 NC 1 2 3
NC 14 31 lcas
VSS
VIN
VOUT
we 15 30 hcas
ras 16 29 oe
NC 17 28 A8
A0 18 27 A7
C
A1 19 26 A6
A2 20 25 A5
A3 21 24 A4
VCC 22 23 VSS
BA25BC0WFP
GND
Vref
E
NC 3
2
5
4
1
OUT
VCC
CTL
NC
68 DEH-P77MP/EW
1 2 3 4
5 6 7 8
WC
CE2
ROM_VDD
SL
DI
CK
CE1
LDET
DO
RDS_CK
RDS_DATA
RDS_LOCK
RDS_HSLK
IC 3 EEPROM IC 5
←
5.0V 5V 3.3V
OSC LPF
AM ANT FMRF
1 ATT
Rch
24
IC 2
IC 1 2.5V B
FM ANT
3 3.3V
ATT Lch
23
FMRF MIXER, IF AMP DET, FM MPX,
RDS DECODER
RF adj
ANT adj
T51 CF52
CF51
AUDIOGND
IC 4
OSCGND
VDD_3.3
←
RFGND
VCC
NC
2 12 15 22 16 4 17
C
DEH-P77MP/EW 69
5 6 7 8
F
E
B
A
D
C
70
1
1
SEG 5 4
SEG 5 3
COMMON
SEG 5 2
SEGMENT
SEG 5 1
SEG 5 0
- LCD(CAW1807)
7.2.2 DISPLAY
SEG 4 9
SEG 4 8
SEG 4 7
SEG 4 6
SEG 4 5
SEG 4 4
SEG 4 3
SEG 4 2
SEG 4 1
SEG 4 0
SEG 3 9
SEG 3 8
SEG 3 7
2
2
SEG 3 6
SEG 3 5
SEG 3 4
SEG 3 3
SEG 3 2
SEG 3 1
SEG 3 0
SEG 2 9
SEG 2 8
SEG 2 7
SEG 2 6
SEG 2 5
SEG 2 4
SEG 2 3
DEH-P77MP/EW
SEG 2 2
SEG 2 1
SEG 2 0
SEG 1 9
SEG 1 8
SEG 1 7
SEG 1 6
3
3
SEG 1 5
SEG 1 4
SEG 1 3
SEG 1 2
SEG 1 1
SEG 1 0
SEG 9
SEG 8
SEG 7
SEG 6
SEG 5
SEG 4
SEG 3
SEG 2
SEG 1
SEG 0
COM 0 COM 0
COM 1 COM 1
COM 2 COM 2
COM 3 COM 3
4
4
COM 4 COM 4
COM 5 COM 5
COM 6 COM 6
COM 7 COM 7
5 6 7 8
VCC=5V
Pin 14
bsens
Pin 73
BSENS=L
B
asens
Pin 72
ASENS=L
dsens
Pin 39
DSENS=L
ASENBO←H C
Pin 80
CSENS
- CSENS <= 2V, 3V <
= CSENS
Pin 91
Last source returns.
2V < CSENS < 3V CD loading functions are available.
Starts Keys except for EJECT key are not available.
communication
with Grille
microcomputer. 300ms D
swvdd←H
Pin 38 300ms
E
Source ON
SYSPW←H
Pin 1
DEH-P77MP/EW 71
5 6 7 8
1 2 3 4
7.4 CLEANING
A
Before shipping out the product, be sure to clean the
following portions by using the prescribed cleaning
tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
72 DEH-P77MP/EW
1 2 3 4
5 6 7 8
8. OPERATIONS
DEH-P77MP/EW 73
5 6 7 8
1 2 3 4
74 DEH-P77MP/EW
1 2 3 4
5 6 7 8
DEH-P77MP/EW 75
5 6 7 8
1 2 3 4
76 DEH-P77MP/EW
1 2 3 4
5 6 7 8
DEH-P77MP/EW 77
5 6 7 8
1 2 3 4
78 DEH-P77MP/EW
1 2 3 4
5 6 7 8
DEH-P77MP/EW 79
5 6 7 8
1 2 3 4
80 DEH-P77MP/EW
1 2 3 4
5 6 7 8
Holder CND1249
2. Replace the front panel to the unit. B
DEH-P77MP/EW 81
5 6 7 8
F
E
B
A
D
C
82
15 cm
11. Note: 6. Rear output 24.Power amp
Depending on the kind of vehicle, the function (REAR OUTPUT) (sold separately)
of 3* and 5* may be different. In this case, be
1
1
2
2
DEH-P77MP/EW
ON/OFF. + +
30. Front speaker 30. Front speaker
18. Orange/white
≠ ≠
To lighting switch terminal.
3
3
+ +
19. Black (ground)
To vehicle (metal) body. 31. Rear speaker ≠ ≠ 31. Rear speaker
4
4
connect to both connectors. keep the Audio Mute lead free of any connections.
Gray : Front right +
Gray/black : Front right ≠ 36. Note:
Green : Rear left + or Subwoofer + Change the Initial Setting of this Product
Green/black: Rear left ≠ or Subwoofer ≠ (refer to the Operation Manual). The
subwoofer output of this unit is monaural.
Violet : Rear right + or Subwoofer +
Violet/black: Rear right ≠ or Subwoofer ≠