Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
SENR10630002
Start By:
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 1/3
3/8/2020 3412E Industrial Engine 4CR00001-UP(SEBP2510 - 68) - Systems & Components
3. Remove washer (2) and O-ring seals (3) from unit injector sleeve (1).
NOTE: Repeat Steps 1 through 3 for the remainder of the unit injector sleeves.
NOTE: The following steps are for the installation of the unit injector sleeves.
NOTICE
Before starting installation, make sure the unit
injector sleeves and the cylinder head bore for
the unit injector sleeves are completely clean
and free of oil, dirt and sealant debris.
4. Install O-ring seals (3) and washer (2) on unit injector sleeve (1). Lubricate the O-ring
seals and the unit injector sleeve bore lightly with clean engine oil.
NOTE: Apply 5P-3931 Anti-Seize Compound to the threads of the unit injector sleeve
before assembly.
5. Put unit injector sleeve (1) in position in the cylinder head. Use Tool (A) to tighten unit
injector sleeve (1) to a torque of 100 ± 2 N·m (75 ± 1 lb ft).
End By:
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 2/3
3/8/2020 3412E Industrial Engine 4CR00001-UP(SEBP2510 - 68) - Systems & Components
Copyright 1993 - 2020 Caterpillar Inc. Sun Mar 08 2020 09:24:01 GMT+0200 (Eastern
All Rights Reserved. European Standard Time)
Private Network For SIS Licensees.
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 3/3