Professional Documents
Culture Documents
Cable Connections: Always turn power off when making any cable connections. 1. Power Cord
2. Computer
3. Mouse Emulation
a) MS Mouse Port
b) PS/2 Mouse Port
4. S-VHS
5. VCR
Procedure:
1. Turn off all power to projector and input sources before making any connections.
2. Connect cables (be careful not to bend any pins in cable connector plugs.
Technical Assistance & Product Information 3. Start up projector then start up input sources.
1-800-328-1371
Internet: scvsdeps@mmm.com 3M 1997 78-6970-xxxx-x
3MP8620 Multimedia Projector Quick Setup Instructions
Projector Packout Projector Startup Procedure
VIDEO
Switch to video mode, then press again to select video
source (video or s-video).
ENTER
Projector Shutdown Procedure
Press to mute the speaker. Press again to return sound. L R
1. Press the STANDBY button (3).
PC Switch to PC mode. (The lamp turns off, the fan motor continues to run)
Press to adjust speaker volume.
MENU Display on-screen menu system (projector adjustments)
! Caution
Toggle mouse emulation ON/OFF.
ON: The L and R buttons operate the left and right mouse Do not turn off the projector power before pressing the STANDBY
key functions. Hold down L/R and operate control stick for button. The fan motor will run for about 1 minute and cool the projector.
drag and drop capability.
OFF: L button is the ENTER confirmation key. R button
not used. Control stick centers image. 2. After fan stops, press main power switch (2) to "OFF".
L/ENTER
Mouse emulation ON, left mouse button. Emulation OFF, 3. Lift cover locks (1) and lower cover into closed position to
R
confirmation of selection.
Mouse emulation ON, right mouse button.
protect lens.
4. Disconnect cables to transport the projector.
8620-01A