Professional Documents
Culture Documents
and Discharger
The GYRO EX™ bin activating feeder and discharger is well suited for almost any size material
discharger produces a controlled gyratory motion and the rate can easily be increased or decreased by
to positively withdraw granular materials from bins, adjusting the gap between the inlet opening and the
storage silos and hoppers at any desired feed rate upper activation cone.
for a more consistent and reliable discharge.
In addition, the GYRO EX bin activating feeder and
At the heart of the GYRO EX bin activating feeder discharger can operate either continuously or as a
and discharger is the drive that produces a radial batch operation with a start/stop operation as desired
force creating a uniform circular motion on both for any given process situation. Also available is an
the upper activation cone and the lower discharge optional variable speed drive for fast and slow feed
cone. It is this annular radial vibratory motion which rates as might be required for an integrated process
imparts the force to the material, assuring a more system, or for precise feeding to weigh hoppers and
reliable and predictable material discharge. This also other downstream process equipment.
minimizes any material stratification in the storage
silo or bin and provides a better material mass flow Features
discharge for a first in, first out discharge. • Uniform material feeding
A unique feature of the GYRO EX bin activating • Infinitely adjustable feed rates
feeder and discharger is that the stored material • Positive discharge of difficult materials
load is completely supported by the upper bin • Prevents material from compacting
activation cone which has a lower cone angle than
the discharge cone, assuring an uninterrupted and • Extremely low headroom allows for more
positive discharge of the stored material. material storage
• Eliminates the need for additional equipment such
The GYRO EX bin activating feeder and discharger as discharge gates or feeders
can also be started and stopped as desired because
• Positive material shut-off
material is not allowed to accumulate or stagnate
in the lower discharge cone which might create • Effective on large or small particles
packing or plugging problems. Irrespective of the • Low power requirements
particle size, the GYRO EX bin activating feeder and
GYRO EX Bin Activating Feeder
and Discharger Design Features
0 00
6000
i nt2
o
tp
Se
5000
Volume (cu. ft./hr.)
500
t1
tp oin
Se
4000 50
12
int
Se tpo
00
3000 oi nt 10
Setp
0
int 75
Setpo
2000
t 500
Setpoin
75
Setpoint 3
1000
0
12 24 36 48 60 72 84 96 108 120 132 144
B - INLET DIAMETER
E - DIAMETER F - DIAMETER
EQUALLY SPACED BOLT CIRCLE
HOLES, QUANTITY - H
G
A - (OUTSIDE FLANGE DIAMETER)
C
2.00
35˚
MOTOR
D - OUTLET DIAMETER*
Corporate Headquarters
Dynamic Air Inc. • St. Paul, MN USA • +1 651 484-2900
Worldwide Offices
Brazil • China • United Kingdom
www.dynamicair.com