You are on page 1of 1

MaxiFit

Overview

A Versatile Solution for Pipe Jointing


MaxiFit universal pipe couplings are designed to All products in the range have a test pressure of 24bar
accommodate plain ended pipes with different outside on water (9bar on gas) and are suitable for 16bar working
diameters. One fitting is able to connect a wide variety of pressure for water (6bar on gas).
pipe materials including steel, ductile iron, PVC, cast iron,
GRP and asbestos cement pipes amongst others. The range Extensive Range
includes the following product lines The expansive range is available in sizes DN40 up to
DN700 and includes MaxiFit couplings & MaxiFit Xtra long
➤➤ MaxiFit Plus – DN50 – DN150
sleeved couplings, MaxiStep reducing couplings, MaxiDaptor
➤➤ MaxiFit small diameter – DN40 – DN300
flange adaptors, MaxiCap, MaxiThread End Cap, & MaxiFit
➤➤ MaxiFit large diameter – DN350 – DN700
Large Diameter couplings & flange adaptors. New to range
The MaxiFit range is designed and manufactured under is MaxiFit Plus couplings and flange adaptors.
quality management systems to BS EN ISO 9001 and meets
the requirements of the UK Water Regulations & BS EN Quick & Efficient Installation
14525, with DN40 to DN300 being independently tested The versatile range is pre-assembled with an innovative

by BSI to verify conformance to this standard. gasket which has ‘slide easy’ ribs that reduce friction on
pipes at the upper tolerance range of the fitting, providing
Wide Tolerance maximum sealing pressure, even on scored, pitted and
With up to 34mm tolerance on the pipe OD it not only corroded pipe surfaces. The captive non-rotating bolt heads
eases installation but can reduce the need for expensive require just a single spanner to install with just one standard
and time consuming trial holes, reduce stock holding and bolt torque across the range. The MaxiFit Plus range offers
increase stock turn over. MaxiFit is an adaptable and better access to bolts when installing, even in narrow and
economic solution to most pipe congested trench conditions.
connections.

MaxiFit
Coupling Pipe Materials
Large Diameter
MaxiThread
MaxiFit Coupling

Large Diameter
MaxiDaptor

MaxiStep

MaxiDaptor
MaxiFit Plus MaxiFit can also be used as a repair
MaxiFit Plus
Flange Adaptor Coupling product - see pages 205 - 206

130 Viking Johnson MaxiFit Telephone: +44 (0)1462 443322

You might also like