Professional Documents
Culture Documents
com
Miniature Radial Blower: C65MS1-L5
62.8 x 65.4x 47.7 mm (2.47 x 2.57 x 1.88 in)
NOTES: - Performances are dependent on the driver used and the test conditions. The data in this spec. sheet was obtained using Boreasa test chamber at 20°C (±2°
C) and sea level, and using a Boreasa D30/5/4Q-E2 driver. It may be different than data measured in other conditions or with other drivers.
- Specifications are subject to change without notice.
- Boreasa blowers have been designed and are manufactured to meet the medical device industry requirements. However, it is not possible to test blowers in
all conceivable customer application configurations. Consequently, to be used in life support equipment, blowers must be life tested and validated by cus-
tomers, in their actual application conditions, in a statistically meaningful quantity.
Technical Data
C65MS1-24PS-01-L5
VCC Nominal Voltage V 24
VCC Voltage Range V 12 ~ 27
IN freeblowing @Nom. Volt. mA 2’450
IN work. point @Nom. Volt. mA 1’850
IN static @Nom. Volt. mA 1’040
PN work. point @Nom. Volt. W 25
L Inductance mH 0.35
R Phase-Phase Ohm 0.7
n freeblowing @Nom. Volt. rpm 42’000
n work. point @Nom. Volt. rpm 44’800
n static @Nom. Volt. rpm 49’000
V freeblowing @Nom. Volt. l/min 440
V work. point @Nom. Volt. l/min 230
P work. point @Nom. Volt. Pa 6’600
P static @Nom. Volt. Pa 8’000
2 2
I Inertia g*mm / oz*in 1400 / 0.0765
M Mass g / oz 225 / 7.95
LpA work. point dB(A) Depend on working point
TOperations °C / °F -20 … +50 / -4 … +122 (in ice-free conditions)
Leads mm / inch 300 / 11.8 (AWG22 & AWG26)
Connector Molex Microfit 43025-1000 (10 wires)
Housing / Impeller Material Medical grade thermo-plastics
Ball Bearing
Tacho
Internal Temperature Sensor Optional