Professional Documents
Culture Documents
Content
1.UPCAM Installation...........................................................................................................................................................................2
2. UPCAM User manual....................................................................................................................................................................... 5
2.1 UPCAM authorization............................................................................................................................................................5
2.2 UPCAM Manager...................................................................................................................................................................7
2.3 Blanks..................................................................................................................................................................................... 7
2.3.1 build new blanks......................................................................................................................................................... 8
2.3.2 Edit blank..................................................................................................................................................................13
2.3.3 Delete Blank............................................................................................................................................................. 15
2.4 bulid New order....................................................................................................................................................................15
2.4.1New order entry list................................................................................................................................................... 15
2.4.2 Creating Orders.........................................................................................................................................................18
2.5 Open historical order............................................................................................................................................................ 19
Classification search methods........................................................................................................................................... 21
1.Type in the order name................................................................................................................................................... 21
2.According to the create time...........................................................................................................................................21
3.Search by time range...................................................................................................................................................... 21
4.Search by material.......................................................................................................................................................... 21
5.Search by type of blank.................................................................................................................................................. 21
2.6 Orders management right button functions.......................................................................................................................... 22
2.7.2 Orders information area............................................................................................................................................25
2.7.3 View area.................................................................................................................................................................. 25
2.7.4 Accessory area and tool editing area..................................................................................................................... 26
Model addition tool........................................................................................................................................................... 26
Adjust basic setup tool.......................................................................................................................................................28
Margin line adjustment tool...............................................................................................................................................28
一、Methods of adding new margin line.......................................................................................................................... 29
二、Adjust margin line..................................................................................................................................................... 32
三、Delete.........................................................................................................................................................................33
四、Define the margin line............................................................................................................................................... 33
Adjust insertion direction.................................................................................................................................................. 34
Pin posture adjustment.......................................................................................................................................................35
Sintering rob adjustment button........................................................................................................................................ 37
Second, the Drop diameter setting.....................................................................................................................................37
Sintering frame setting.......................................................................................................................................................38
Tool Path Generation.........................................................................................................................................................39
2.8 Error Message.......................................................................................................................................................................39
2.8.1 dongle error message................................................................................................................................................ 40
2.8.2 Model Loading Tips................................................................................................................................................. 41
2.8.3 Model Editing Error Messages................................................................................................................................. 42
2.8.4 Tool Path Generation Error Message....................................................................................................................... 42
2.9 basic information configuration........................................................................................................................................... 43
2.9.1 Basic information..................................................................................................................................................... 44
2.9.2 SETTING..................................................................................................................................................................45
2.9.3 The auxiliary model..................................................................................................................................................46
2.9.4 Constraint configuration........................................................................................................................................... 47
2.9.5 DEVICE MANAGER.............................................................................................................................................. 48
How to configure equipment............................................................................................................................................. 48
2.9.6 About CAM.............................................................................................................................................................. 51
2.10 shortcuts..............................................................................................................................................................................52
1
1.UPCAM Installation
1.Before installing the program, you need to insert the authorized "UPCAM" encryption
lock into your computer and ensure that the USB interface is valid.
2.Click the installation, and install it
4.Click next, display the installation directory selection interface, select Browse to modify the installation
directory (note: 1.upcam does not recommend installation on the system disk. The installation directory must
not have Chinese characters. Installation directory folder names are not allowed "spaces")。
2
6. Create desktop shortcuts and select the corresponding processing equipment configuration.
NULL Machine:Do not select any devices for configuration
UPMILL P4:Select the UP3d milling machine P4 for configuration.
UPMILL P5:Select the UP3d milling machine P5 for configuration.
UPMILL P4 UPMILL P5:Select the UP3d milling machine P5 and P4 for configuration.
3
7. Click next to enter the ready installation prompt interface.
4
9.After installation, officially enter the installation completion interface.
5
2.Authorization verification passed and entered the initial management interface of the
software.
6
2.2 UPCAM Manager
2.3 Blanks
2.Blank manager。
7
2.3.1 build new blanks
8
4 types of blanks could be choosen
9
A. Company:enter blank manufacturer
B. Blank name: enter blank name
C. Material: enter the default material type of this blank
D. Dia: enter the corresponding diamater of the round blank
E. Hight(H): enter the height of this blank
F. Color: enter the default color information of blank
10
A. Company:enter blank manufacturer
B. Blank name: enter blank name
C. Material: enter the default material type of this blank
D. Length(L):enter the corresponding length of the ceramic blank
E. Width(W): enter the corresponding width of glass ceramic
F. Hight(H): enter the height of this blank
G. Color: enter the default color information of blank
3.Titanium Rod
11
A.Company:enter blank manufacturer
B.Blank name: enter blank name
C.Material: enter the default material type of this blank
D.Dia: enter the corresponding diamater of the round blank
E.Hole Dia: enter the corresponding hole diameter of the blank
F.Hight(H): enter the height of this blank
G.Color: enter the default color information of blank
H.Precut Model:click ‘browse’ to import the precut interface data
I.Precut Align Model:click ’browse’ to import the Precut Model axial data
4.Rectangular Blank
12
A. Company:enter blank manufacturer
B. Blank name: enter blank name
C. Material: enter the default material type of this blank
D. Length(L):enter the corresponding length of the ceramic blank
E. Width(W): enter the corresponding width of glass ceramic
F. Hight(H): enter the height of this blank
G. Color: enter the default color information of blank
1.At the surface of blank manager,select the blank which need to edi, and click“edit”
13
2.Blank edit surface, same as the surface of add blank which can edit again
the information of blank
14
2.3.3 Delete Blank
1.At the surface of blank manager, click to select the blank need to be deleted, then click
the delete button
When build new order, according to different habits can have different way to build, detailed introduction
refer to the new order entry list。
15
2.Move the mouse over the order list and right-click, then click ‘new’
3.Click the button of ‘local’ (Chart. 1), click ‘browse’ to find the file you want to process (Chart. 2), and
double-click to open it to pop up the dialog box of new order (Chart. 3).
Chart 1
16
Chart 2
Chart 3
17
2.4.2 Creating Orders
18
1. Device management:You can select the devices
2. Material type selection:Select the type of material to be processed
3. Blank type selection:Clients can choose the material type and material thickness
4. Orders information:
Order information area automatically identifies the blank material type, blank color and blank template
after selecting the blank.
Customer custom fill in the order item name, select the milling machine, material magnification, blank
ID,while
the batch of blanks can be filled or not filled
A. Name:fill the name of case(The system defaults by time).
B. Type:Default is custom.
C. Material:The blank material has been determined when the new blank is created.
D. Color:The color of the blank has been determined when the new blank is created.
E. Template:The software automatically identifies the blank template without manual selection.
F. Blank ID:This information can be filled in or not
G. Batch ID of blanks:This information can be filled in or not
H. Magnification: Fill in the zoom ratio of the material.
1. Find the order you want to open in the order management area and double click to open.
19
Classification search methods
1.Type in the order name
2.According to the create time
3.Search by time range
4.Search by material
5.Search by type of blank
20
1.Create an order.
2.Reset the current order to the toolpath before it is generated,and Marks generated by all toolpaths in the
current order are cleared.
3.Delete the currently selected order.
4.You can use the open export directory to open the directory generated by the toolpath
if the current order already has a toolpath generated.
21
2.7 CAM
22
2.7.1 Model lists
23
When the layout loads the model, the model list shows the information for each case.
1.Model name.
2.Model layout status a. Position b. Neck c. Connecting bar. When one of the states of the model has an
error, the green √ will turn into a red ×.
3.Whether the model is locked.
4.Model height and work needs to be highly viewed.
5.Model type selection.
24
2.7.2 Orders information area
2.Click will pop up(figure 1),In this window, you can adjust the transparency of the blank, design
body, PIN, neckline, milling area, sintered bar, fixture, and coordinates to view the layout.
25
figure 1
1.
26
27
Adjust basic setup tool
Click Adjust basic set up, the tool edit zone will display the part of the order
information as below picture.
1.Order name
2.Scaling
3.Material specification
4.Reserved space setting
28
Above parameters can all be adjusted
The main function is to add, adjust, delete and define the margin line. Click Margin
line adjust, the tool edit zone will display below interface:
29
一、Methods of adding new margin line
1. One-point generate
Click one-point generation button and click on the margin line position of the model,
the margin line will automatically generate
2.Multi-points generate
Click Control points generate button, click on the margin line, there will be an red
point on it, then move the mouse with green drag line along the margin line and add
mark point, finally click on the first point to finish.
30
31
3.Control points generate
Add new margin line by adding 3 points or above on the margin line with one
direction.
4.Draw generate
Click on the inner cavity of the model to add new margin line
32
二、Adjust margin line
三、Delete
When the margin line of the model is recognized as abnormal, click Delete button to
delete the selected margin line
33
四、Define the margin line
The margin line which are already recognized can be defined as:
1.The top margin line
2.The middle margin line
3.The bottom margin line
34
Ⅰ. Adjust insertion direction
Manual Adjust
Click Adjust insertion direction, move the red arrow to adjust the insertion direction
35
Pin posture adjustment
In this step, you can add ,edit, and delete pin bar.
Click "Pin posture adjustment", the tool editing area will pop up the following
interface
36
Ⅰ.Pin editing
Pin modification
37
Click to select the pin you want to modify, press "Ctrl" button and roll the wheel to
change the pin radius.
Click and drag the pin to change the position of the pin.
Ⅱ.Pin setting
1. Set the pin type (cylinder/Taper), the taper type can set the radius of the pin head
38
Sintering rob adjustment button
Ⅰ.Drops editing
39
Add drop
Click on the "Add" button, then left click on the teeth where you want to create the
sintering rod (buccal side) and add it.
Delete drop
Click to select the sintering rod that needs to be removed, and then click the delete
button to realize the function of deleting the sintering rod.
Drop modification
Click to select the sintering rod that needs to be modified, press and hold the keyboard
"ctrl" button and slide the wheel to change the radius of the sintering rod.
Click on the sintering rod without releasing it. Move the mouse to change the position
of the sintering rod.
Click “sintering frame setting”, the tool editing area will pop up the following
interface
40
1. Set whether the middle of the sintering frame is hollowed out.
2. Set the wall thickness of the sintering frame.
3. Set the thickness of the sintering frame base.
4. Set the expansion width of the sintering frame.
5. Set the thickness of the support plate.
6. Choose concave milling or convex milling.
Click “Tool Path Generation” and the tool editing area will pop up the following
interface.
41
1. Select the tool type (2+1/2+1+0.6).
2. Select the generation quality (standard/fast/fine).
3. Select the tool path to generate.
Generate a toolpath for the design selected by the current left list.
42
2.8 Error Message
1. The dongle does not recognize, expire, and other error messages.
2. Error message encountered when loading the model。
3. The error message encountered when editing the model.
4. Error message encountered when generating the tool path.
When you open the CAM software, the above image pops up. Please click "ok" to
open the dongle management.
43
After opening the dongle management, if the prompt "This machine does not insert
the dongle",may be for the following reasons:
1. No dongle is inserted.
2. USB cannot be recognized by the computer.
3. The computer usb interface can not recognize the dongle, due to the usb interface
version problem, the computer usb interface version is relatively low, please update
the driver, or change the computer.
4. The front USB port of the desktop computer is not connected
properly. Please use the back usb interface.
44
If the dongle has not expired, please check if the computer system
time is correct. If it is not correct, please modify it.
1. If the model has no edge line,a red "x" is displayed in the model list.
2. The position placement overlaps, or over the current blank design
range, and the position is incorrect, and “x” will be prompted.
3. If there is no connecting rod, it will prompt "x".
4. If it is "locked", the teeth has been designed and milled;
45
2.8.3 Model Editing Error Messages
1. Click to generate the tool path. If there is a model that may be invalid, prompt:
2. Click on “Generate tools for all designs”. If there is a teeth without margin line, the
prompt:
46
If you select “ok”, it will automatically filter the model without the margin line and
continue to calculate the tool path.
47
2.9.1 Basic information
1. Set the export path, the target folder generated by the "tool path".
2. Set the time type: European standard, Asian standard.
3. Set the minimum gap between the blank and the fixture to avoid the machining
area being exceeded.
4. Set the default type of "connecting rod".
5. Set the default milling space.
6. Set the minimum milling range for tilt milling.
7. Set the distance between the connecting rod and the edge line to prevent the
connecting rod from covering the edge line.
8. Set the default cut ratio of the connecting rob.
9. Set the suffix name of the tool path generation file, you can set
your own suffix according to the different needs of the milling
machine.
10. Set the path where the tool path file is saved.
11. Set whether to use time as the folder name to generate the tool
path.
12. Order cleaning, you can choose to clear all orders before a
certain day.
48
2.9.2 SETTING
49
2.9.3 The auxiliary model
50
2.9.4 Constraint configuration
51
5.SETTING THE COLOR
52
2.9.5 DEVICE MANAGER
53
2. Click "add" to fill in the machine information and number of machine axes
according to the actual number of axes of the equipment, and select -x in the direction
of the chuck of the milling machine;
54
4.Click ok
55
2.9.6 About CAM
56
2.10 Shortcuts
57