Professional Documents
Culture Documents
8677 - TDC - INCOLOY 825 Rev 1
8677 - TDC - INCOLOY 825 Rev 1
1 GENERAL
2.3 Plates shall comply to the Chevron spec Doc. No. CPM-SU-5013-E
2.4 Plates shall be hot rolled and shall have no.1 finish on both sides.
2.5 Plates having thickness 16mm and above shall be 100% ultrasonically tested (UST)
as per SA-578 with acceptance standard as per Level B.
2.6 Material test reports including a statement concerning fine grain practice and a definition of
all heat treatments and non-destructive examinations shall be stamped to permit
raceability to the corresponding forging.
2.9 Material Certifications shall meet the requirements of EN 10204 Type 3.1.