Professional Documents
Culture Documents
Att:
Quotation TMC-200915
We thank you for your inquiry, and are pleased to quote according to the enclosed specification.
TMC compressors are single-stage, oil-lubricated marine screw compressors, constructed for continuous operation in high
ambient temperatures. The compressor is supplied as a complete self-contained unit with all necessary equipment installed,
including starter. The compressor need only be connected to main power, air outlet and - if required - cooling water.
Optional equipment:
Warranty: 12 months from first use, 18 months after dispatch from manufacturer, or whichever comes first. Ref.
TMC Warranty terms doc. No. 10000.
Prices: The prices given are without tax and customs duties, unless otherwise agreed upon.
Delivery time: 12-14 weeks, reservations to changes caused by Corona virus outbreak
Delivery: Ex Works our address according to INCOTERMS 2020. Delivery conditions according to ”General
conditions for supply of plant and machinery for export”, formula ECE 188 with addendum of 1992.
Equipment quoted as “In Stock” is subject to prior sale.
Payment: In advance
We trust that our quotation is of interest. If further information is required, we will be pleased to be at your service.
Best regards,
Tamrotor Marine Compressors AS
Arne T. Rekdal
Senior Sales Engineer Offshore
E-Mail: ARekdal@tmc.no
Mobile: +47 99204943
TECHNICAL SPECIFICATION
Automatic stop/start running control Signals for remote monitoring (potential free contacts)
The compressor runs automatically, it stops and starts - Electric motor running signal
within the adjusted pressure levels. The number of starts - Common alarm signal
per hour is limited by a timer, and corresponds to the - Load/off-load signal
recommendations of the motor manufacturer - Stand-by signal
- Local/remote feedback
Digital display - External pressure reading (4 – 20mA)
- Pressure display, discharge pressure
- Running temperature Signals for remote control
- Menu-based text and graphic display, compressor - Remote start/stop, 2-wire, 4-wire or 24V
monitoring - Remote emergency stop
- Ampere meter - Remote load/unload
- Running hours and load hours
Electrical motor
Control panel equipment - IP 55, F-class insulation, 2-poled
- Main switch - Space heater with switch and orange lamp
- On button, off button, reset button (integrated in - Thermistor protection
controller) - Duty cycle - S1 continuous
- Emergency stop button - Dimensioned tested for operation in relevant
- Red alarm LED (integrated in controller) temperature
- Green running LED (integrated in controller) - Fan on main motor shaft
- White power on LED (integrated in controller) - Grease nipples and vibration probes
- Local/Remote switch
- Separate IE/PE Other standard equipment
- Three stage oil separation system
Alarm indication - Oil level sight glass
- Common alarm lamp + display text - Air/oil separator equipped with safety valve
- High running temperature - Oil separator receiver
- High discharge temperature - Liquid tight baseplate with drain plug
- Inlet filter element diff. pressure high - Inlet valve
- Oil separator element, differential - Discharge/non-return valve
pressure high - Inlet filter
- Service time - Oil filter
- Oil separator filters
Safety shut downs - Oil cooler and compressed air after cooler
- Constant alarm light indication (shut down) - Thermal mixing valve
- Common alarm lamp + display text - Water separator
- Excessive running temperature - Aut. drain control
- Motor overload, thermistor-based - Sound absorbing canopy
- High pressure shut down at 10% above max - Halogen free marine cables
pressure - Built in vibration dampers
- Over current, phase fault - Cable marking
- Door stopper on el. box
Service countdown system for - Paint colour, Munsell No. 7.5 BG 7/2
- Oil change
- Inlet filter element change
- Oil filter element change
- Oil separator elements change
1/1
Doc.no MDATA2032 FOR QUOTATION ONLY TMC 49 - 10 EA / EW
400 V / 50 Hz Y/D 690 V / 50 Hz DOL Max Amb. 45 C° 10
Cooling
Allowed ambient temperature MIN - MAX (C°) 0 - 45
Compressed air temp. above cooling medium temp. (C°) * 6- 8
Air cooled compressors (EA) *
Max. cooling air pressure drop (Pa) 30
Cooling air temperature rise (C°) 17
Water cooled compressors (EW)
Water flow (l/s), Fresh water cooled at 60% air humidity / 45°C temp 0,8
Water in (max) / water out (max) (C°), Fresh water cooled 36 / 61
Min water inlet pressure with zero back pressure (bar)/(MPa), Fresh water 1,0 / 0,10
Water flow (l/s), Sea water cooled at 60% air humidity / 45°C temp 1,5
Water in (max) / water out (max) (C°), Sea water cooled 36 / 50
Min water inlet pressure with zero back pressure (bar)/(MPa), Sea water 2,0 / 0,20
Max. water inlet pressure (bar) 6
Water in / out T2 / T3 (Standard) ISO 228/1 G 1 external
Oil cooler heat rejection (kW) 45
After cooler heat rejection (kW) at 60% air humidity / 45°C temp 23
Heat dissipation (kW) EA / EW ** 57,2 / 5,1
* Air cooled data is based on 0% air humidity *** Calculated with 10°C temperature difference between room temp. and cooling air inlet temp.
** To be used in compressor room ventilation calculation **** Noise values determined according to ISO 2151 and ISO 3744, Uncertainty KpA / KWA 3 dB
Extra notes:
DOC. REF.: MDATA2032 REV.1 19.12.2018
Item Description
T1 Air outlet
T2 Water in
T3 Water out
T4 Condensate drain
TMC40083 rev.00/23.08.2018
TECHNICAL SPECIFICATION
Cooling
Allowed ambient temperature MIN - MAX (C°) 0 - 45
Compressed air temp. above cooling medium temp. (C°) * 5 - 10
Air cooled compressors (EA) *
Cooling air flow (m³/s) 1,8
Max. cooling air pressure drop (Pa) 50
Cooling air temperature rise (C°) 15
Water cooled compressors (EW)
Cooling air flow (m³/s) 1,8
Water flow (l/s), Fresh water cooled at 60% air humidity / 45°C temp 0,6
Water in (max) / water out (max) (C°), Fresh water cooled 36 / 61
Water flow (l/s), Sea water cooled at 60% air humidity / 45°C temp 1,2
Water in (max) / water out (max) (C°), Sea water cooled 36 / 50
Min water inlet pressure with zero back pressure (bar)/(MPa) (Serial) 0,8 / 0,08
Max. water inlet pressure (bar) 6
Water in / out T4 / T3 (Standard) ISO 228/1 G 3/4 external
Oil cooler heat rejection (kW) 28
After cooler heat rejection (kW) at 60% air humidity / 45°C temp 13
Heat dissipation (kW) EA / EW 35,9 / 3,2
Capacity and power consumption measured according to ISO 1217, Annex C * Air cooled data is based on 0% air humidity
Noise values determined according to ISO 2151 and ISO 3744, Uncertainty KpA / KWA 3 dB
Motor nominal power and temperature rise according to IEC60034-1