Professional Documents
Culture Documents
Date : 31/03/18
Doc No:TES/16
Technical Evaluation Sheet TES No :
142 (Rev)
Customer KISHAN FORGE, RAJKOT Component Detial : Please specify
S.N Customers
Parameter Customer Requirement ARORA IRON Limits
o. Acceptance
Technical Understanding
EAF-LRF-VD-CCM With EMS
1 Melting Practice EAF-LRF-VD-CCP (with EMS)
& AMLC
%C = 0.67-0.73
%Mn = 0.50-0.58
%V = 0.030-0.060
%Si = 0.15-0.25 Pref= 0.17Min
2 Chemical Composition (Preferable) Accepted
%S = 0.060-0.080
%Cr = 0.10-0.15
%P = 0.030 max
%Al = 0.010 max
%Ni = 0.15 max
%Mo = 0.05 max
%Cu = 0.100 max
3 Tramp Elements %Sn = 0.005 max Accepted
%Ca = 0.0004 max
%Ti = 0.002 max
Rest tramps are as per STD limit
Hydrogen = 2.00 ppm
4 Gas Levels (LECO ONH 836) Oxygen = 20.0 ppm Can be achieved
Nitrogen = 120-160 ppm
5 Grain Size 5-8 & fine as per ASTM E-112 Accepted
Thin Heavy
A - -
6 Inclusion Rating B 1.00 0.50 Accepted
C 1.00 0.50
D 1.00 0.50
Tensile Strength (TS) 900-1050 (N/mm2)
Yield Strength (YS) 550 Min
Mechanical Elongation (EL) 10 Min
7 Accepted
Properties
Reduction Area (RA) 30 Max
Impect Value (DVM
16 Joules Max
3.00mm 'U')
8 Section required 60 Dia Accepted
9 Reduction Ratio Min 8:1 and Above Appected
10 Supply Condition As Rolled OK
11 Dimensional / Ovality tolerance - As per IS 3739 Grade I
1 of 3
ARORA IRON & STEEL ROLLING MILLS (P) LTD.
Date : 31/03/18
Doc No:TES/16
Technical Evaluation Sheet TES No :
142 (Rev)
Partial decarb Shall be 1% of
12 Decarb level -
rolling dia max.
13 Hardness ( As rolled or Annealed ) 250 BHN Max Accepted
20 Anti Mixing Test (Spark & Spectral) 100% free from any mixup 100% Spark al & XRF testing
21 Microstructure - -
2 of 3
ARORA IRON & STEEL ROLLING MILLS (P) LTD.
Date : 31/03/18
Doc No:TES/16
Technical Evaluation Sheet TES No :
142 (Rev)
Commercial Agreement
S.N
Parameter ARORA IRON Limits Customer Acceptance Remarks
o.
PO is required for every order for easy
35 Purchase order necessity tracking of order execution & audit.
Accepted
Lead time for any order execution/ 12-15 days from date of receipt of
36 Accepted
Delivery period Purchase Order.
37 Transit period 3 to 6 days Accepted
44 Interest (In case delay of payment) NA Payment will be done on due date
HDFC Bank Ltd.
Gill Road Branch, Ludhiana
45 Payment Mode ( RTGS Only ) A/C No : 50200007611401 Accepted
IFS Code : HDFC 0001341
3 of 3