The document provides instructions for creating geometric shapes using commands in a CAD program. It has the user first create a rectangle from the points (2,5), then apply a .5 radius fillet to a corner and trim excess. Next, the user creates a circle with radius 1.5 and trims it, then makes a small circle and mirrors it to the other side.
The document provides instructions for creating geometric shapes using commands in a CAD program. It has the user first create a rectangle from the points (2,5), then apply a .5 radius fillet to a corner and trim excess. Next, the user creates a circle with radius 1.5 and trims it, then makes a small circle and mirrors it to the other side.
The document provides instructions for creating geometric shapes using commands in a CAD program. It has the user first create a rectangle from the points (2,5), then apply a .5 radius fillet to a corner and trim excess. Next, the user creates a circle with radius 1.5 and trims it, then makes a small circle and mirrors it to the other side.
Specify First Corner Point Specify First Corner Point: @2,5 Select Setting: mode Select First Object: R specific fillet Radius: .5 Select second object to apply corner Command: 1c Command: C (Circle) Specify radius of circle: 1.5 Select cutting edge Specify opposite Corner Select Trim Command: Circle Specify radius of diameter: .2 Command: MI (Mirror to the other side)