Professional Documents
Culture Documents
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads
on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5
mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive
of surface applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform
and free from streaks and holes complete as per specifications. MORTH Specification No. 803
Pedestrian Cross @
Sqm 11 3 0.5 16.5
Ch:176.34km
Pedestrian Cross @
Sqm 11 3 0.5 16.5
Ch:176.80km
Pedestrian Cross @ Sqm 11 3 0.5 16.5
Ch:177.45km
Pedestrian Cross @
Ch:179.40km Sqm 11 3 0.5 16.5
Pedestrian Cross @
Sqm 11 3 0.5 16.5
Ch:179.94km
Speed Breaker @
Sqm 11 3 0.5 16.5
Ch:176.34km
Speed Breaker @
Sqm 11 3 0.5 16.5
Ch:177.50km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:177.89km
Speed Breaker @
Ch:178.02km Sqm 11 3 0.5 16.5
Speed Breaker @
Sqm 11 3 0.5 16.5
Ch:178.07km
Speed Breaker @
Sqm 11 3 0.5 16.5
Ch:178.29km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:178.38km
Speed Breaker @
Ch:178.73km Sqm 11 3 0.5 16.5
Speed Breaker @
Sqm 11 3 0.5 16.5
Ch:178.91km
Speed Breaker @
Sqm 11 3 0.5 16.5
Ch:179.35km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:180.34km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:176.34km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:176.80km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:177.45km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:179.4km
Speed Breaker @ Sqm 11 3 0.5 16.5
Ch:179.94km
523.5 429 224581.5
Note: For Barlane marking thickness of strip shall be 5mm
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45
cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45
cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45
cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45
cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45
cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x
75 x 5 mm, 330 mm long complete as per clause 800.10 complete as per specifications. Excluding cost of
earth work excavation and PCC for fixing. A. Type - A, “W” MORTH Specification No. 810
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube
corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09
specification & fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick
aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported
on round pipe post of 1.5 Meters height and gouted 60 cm below ground level. The sign post should be
painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and firmly fixed to
the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60
cm including cost & conveyance of all materials, equipment,machinery & Labour with all leads and
lifts,Loading charges necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible
prismatic sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as
retroreflective elements mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive
and easily removable liner,containing screen printed arrow/slant line pattern in black color in a continuous
roll format and the sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of
exhibiting very high conformability and non-returning dead-fold characteristics required for application on
rough and uneven surfaces.
14 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty
cobble stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height)
rectangular sections and ramp on either side of road hump of 0.85 mtr (wide), including providing
WBM (2 layers) for shoulder portion 1.7mts in length on either side, completing with road marking paint
with applied thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2
Nos. retro reflective traffic signs as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for
formation width of 9.00 mtrs. and using SDBC mix material
Curve @ 0 Acres 10
Ch:177.1km Sqm 1 998.447 Guntas
Market Rate 0.25 2000000.00 500000.00
Per Acre
15 Solar Blinkers
At Ch: 175.92 km Nos 2 2.00
At Ch: 176.09 km Nos 2 2.00
At Ch: 176.89 km Nos 2 2.00
At Ch: 177.15 km Nos 2 2.00
At Ch: 178.72 km Nos 2 2.00
At Ch: 179.17 km Nos 2 2.00
Market Rate 12.00 10800.00 129600.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass
Beads on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5
mm is exclusive of surface applied glass beads as per IRC:35 standards specified. The finished surface to
be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No.
803
Pedestrian Cross @
Sqm 8 3 0.5 12.00
Ch:667.30
Speed Breaker @
Ch:665.14km Sqm 8 3 0.5 12.00
Speed Breaker @
Sqm 8 3 0.5 12.00
Ch:665.14km
Speed Breaker @ Sqm 8 3 0.5 12.00
Ch:665.14km
Speed Breaker @
Ch:665.14km Sqm 8 3 0.5 12.00
Speed Breaker @
Ch:665.14km Sqm 8 3 0.5 12.00
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x
75 x 5 mm, 330 mm long complete as per clause 800.10 complete as per specifications. Excluding cost of
earth work excavation and PCC for fixing. A. Type - A, “W” MORTH Specification No. 810
Crash Barrier @
m 1 130.00 130.00
Ch:657.3km
Crash Barrier @ m 1 102.00 102.00
Ch:658.92km
Crash Barrier @ m 1 132.00 132.00
Ch:660.27km
Crash Barrier @
Ch:660.36km m 1 60.00 60.00
Crash Barrier @
m 1 140.00 140.00
Ch:663.3km
Crash Barrier @ m 1 140.00 140.00
Ch:663.32km
Crash Barrier @ m 1 136.00 136.00
Ch:663.63km
Crash Barrier @
Ch:663.81km m 1 80.00 80.00
Crash Barrier @
m 1 200.00 200.00
Ch:664.74km
Crash Barrier @ m 1 96.00 96.00
Ch:665.34km
Crash Barrier @ m 1 78.00 78.00
Ch:666.09km
Crash Barrier @
Ch:666.15km m 1 80.00 80.00
Crash Barrier @
m 1 88.00 88.00
Ch:666.63km
Crash Barrier @ m 1 60.00 60.00
Ch:669.12km
Crash Barrier @ m 1 60.00 60.00
Ch:669.48km
Crash Barrier @
Ch:672.87km m 1 76.00 76.00
Crash Barrier @
m 1 152.00 152.00
Ch:675.6km
Crash Barrier @ m 1 84.00 84.00
Ch:675.84km
2444.00 1959 4787796
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube
corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09
specification & fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm
thick aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame.
Supported on round pipe post of 1.5 Meters height and gouted 60 cm below ground level. The sign post
should be painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and
firmly fixed to the ground by means of foundation with M 20 grade cement, concrete foundation size of 45
cm x 45 cm x 60 cm including cost & conveyance of all materials, equipment,machinery & Labour with
all leads and lifts,Loading charges necessary for satisfactory completion of the work as directed by
engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible
prismatic sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as
retroreflective elements mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive
and easily removable liner,containing screen printed arrow/slant line pattern in black color in a
continuous roll format and the sheeting shall be extremely flexible and easy to bend or wrap around
objects,capable of exhibiting very high conformability and non-returning dead-fold characteristics
required for application on rough and uneven surfaces.
14 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty
cobble stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height)
rectangular sections and ramp on either side of road hump of 0.85 mtr (wide), including providing
WBM (2 layers) for shoulder portion 1.7mts in length on either side, completing with road marking
paint with applied thermoplastic compound with reflecting glass beeds on bituminous surface and
providing 2 Nos. retro reflective traffic signs as per IRC SP 67 -2010 (for details refer IRC 99-1988) for
single lane for formation width of 7.50 mtrs. and using SDBC mix material
Curve @
Ch:656.25km Sqm 1 998.447 0.25
Curve @
Sqm 1 5526.685 1.37
Ch:656.6km
Curve @ Sqm 1 1293.36 0.32
Ch:656.91km
Curve @ Sqm 1 2728.17 0.67
Ch:657.3km
Curve @
Ch:658.92km Sqm 1 2514.28 0.62
Curve @
Sqm 1 5776.97 1.43
Ch:660.27km
Curve @ Sqm 1 2030.58 0.50
Ch:660.36km
Curve @ Sqm 1 8523.22 2.11
Ch:663.18km
Curve @ Sqm 1 4890.64 1.21
Ch:663.3km
Curve @ Sqm 1
Ch:663.63km
6285.85 1.55
Curve @ Sqm 1
Ch:663.81km
Curve @ Sqm 1 1777.88 0.44
Ch:664.74km
Curve @ Sqm 1 10324.82 2.55
Ch:665.34km
Curve @ Sqm 1
Ch:666.09km
1824.86 0.45
Curve @ Sqm 1
Ch:666.15km
Curve @
Ch:666.63km Sqm 1 5252.77 1.30
Curve @
Sqm 1
Ch:669.12km
12008.59 2.97
Curve @ Sqm 1
Ch:669.48km
Curve @ Sqm 1 29378.94 7.26
Ch:672.87km
Curve @
Ch:675.575km Sqm 1 3459.98 0.85
Curve @
Sqm 1 810.06 0.20
Ch:675.845km
Per
Market Rate Acre 26.05 2000000.00 52100000.00
16 Solar Blinkers
At Ch:656.55km Nos 2 2.00
At Ch:663.14km Nos 2 2.00
At Ch:664.65km Nos 2 2.00
At Ch:666.73km Nos 2 2.00
Curve @
m 1 352.195 352.195
Ch:656.25km
Curve @ m 1 198.039 198.039
Ch:656.6km
Curve @
Ch:656.91km m 1 228.156 228.156
Curve @
m 1 217.907 217.907
Ch:657.3km
Curve @
m 1 415.759 415.759
Ch:658.92km
Curve @ m 1 308.882 308.882
Ch:660.27km
Curve @
Ch:660.36km m 1 389.843 389.843
Curve @
m 1 394.398 394.398
Ch:663.18km
Curve @
m 1 321.114 321.114
Ch:663.3km
Curve @ m 1 235.462 235.462
Ch:663.63km
Curve @
Ch:663.81km m 1 323.854 323.854
Curve @
m 1 536.371 536.371
Ch:664.74km
Curve @
m 1 496.436 496.436
Ch:665.34km
Curve @ m 1
Ch:666.09km
251.050 251.05
Curve @
Ch:666.15km m 1
Curve @
m 1 347.363 347.363
Ch:666.63km
Curve @
m 1
Ch:669.12km
566.830 566.83
Curve @ m 1
Ch:669.48km
Curve @
Ch:672.87km m 1 1463.844 1463.844
Curve @
m 1 287.790 287.79
Ch:675.575km
Curve @
m 1 251.876 251.876
Ch:675.845km
0.00
Per
Lumsum rate 7587.17 19000.00 144156211.00
Meter
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
Speed Breaker@
Ch:5.28km Sqm 8 3 0.5 12.00
Speed Breaker@
Sqm 8 3 0.5 12.00
Ch:5.37km
Speed Breaker@
Sqm 8 3 0.5 12.00
Ch:5.76km
Speed Breaker@ Sqm 8 3 0.5 12.00
Ch:8.55km
Speed Breaker@
Ch:5.58km Sqm 8 3 0.5 12.00
Speed Breaker@
Sqm 8 3 0.5 12.00
Ch:5.79km
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series
channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level,
all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364,
metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long
complete as per clause 800.10 complete as per specifications. Excluding cost of earth work excavation and PCC
for fixing. A. Type - A, “W” MORTH Specification No. 810
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification
& fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin
on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of
1.5 Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red
oxide paint and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of
foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost &
conveyance of all materials, equipment,machinery & Labour with all leads and lifts,Loading charges
necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high
conformability and non-returning dead-fold characteristics required for application on rough and uneven
surfaces.
14 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections
and ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for
shoulder portion 1.7mts in length on either side, completing with road marking paint with applied
thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro
reflective traffic signs as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for formation
width of 7.50 mtrs. and using SDBC mix material
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
Speed Breaker@
Sqm 8 3 0.5 12.00
Ch:19.68km
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising
of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel
parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam
rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per
clause 800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type -
A, “W” MORTH Specification No. 810
Crash Barrier @
Ch:10.69km m 1 102.00 102.00
Crash Barrier @
m 1 152.00 152.00
Ch:10.77km
Crash Barrier @ m 1 122.00 122.00
Ch:11.52km
Crash Barrier @
Ch:11.68km m 1 138.00 138.00
Crash Barrier @
Ch:14.14km m 1 70.00 70.00
Crash Barrier @
m 1 134.00 134.00
Ch:14.2km
Crash Barrier @ m 1 182.00 182.00
Ch:16.2km
Crash Barrier @
Ch:16.44km m 1 122.00 122.00
Crash Barrier @
Ch:16.5km m 1 170.00 170.00
Crash Barrier @
m 1 118.00 118.00
Ch:16.72km
Crash Barrier @ m 1 166.00 166.00
Ch:16.89km
Crash Barrier @
Ch:17.51km m 1 100.00 100.00
Crash Barrier @
Ch:20.44km m 1 128.00 128.00
Crash Barrier @
m 1 180.00 180.00
Ch:21.34km
Crash Barrier @ m 1 146.00 146.00
Ch:21.6km
Crash Barrier @
Ch:24.32km m 1 142.00 142.00
Crash Barrier @
Ch:24.42km m 1 126.00 126.00
Crash Barrier @
m 1 184.00 184.00
Ch:25.23km
Crash Barrier @ m 1 114.00 114.00
Ch:25.92km
Crash Barrier @
Ch:19.25km m 1 136.00 136.00
Crash Barrier @
Ch:19.32km m 1 154.00 154.00
Crash Barrier @
m 1 128.00 128.00
Ch:19.42km
Crash Barrier @ m 1 168.00 168.00
Ch:14.61km
Crash Barrier @
Ch:14.76km m 1 220.00 220.00
Crash Barrier @
Ch:15.03km m 1 130.00 130.00
Crash Barrier @
m 1 126.00 126.00
Ch:19.78km
Crash Barrier @ m 1 150.00 150.00
Ch:20.11km
Crash Barrier @ m 1 124.00 124.00
Ch:20.21km
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification &
fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on
both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of 1.5
Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red oxide
paint and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of foundation with
M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all
materials, equipment,machinery & Labour with all leads and lifts,Loading charges necessary for satisfactory
completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
Curve @ Ch:10.350
to 11.910 km Sqm 1 29528.323 7.30
Curve @
Sqm 1 2353.185 0.58
Ch:19.25km
Curve @ Sqm 1 1941.824 0.48
Ch:20.43km
Curve @ Sqm 1 9894.635 2.45
Ch:21.18km
Curve @
Ch:24.33km Sqm 1 6128.554 1.51
Curve @
Sqm 1 4834.635 1.19
Ch:25.23km
Curve @ Sqm 1 2170.294 0.54
Ch:25.92km
Per
Market Rate 20.79 2000000.00 41580000.00
Acre
Curve @ Ch:10.350
m 1 1490.063 1490.063
to 11.910 km
16 Solar Blinkers
Solar Blinkers @ 2.00
Ch:8.77km Nos 2
Solar Blinkers @
Ch:8.98km 2.00
Nos 2
Solar Blinkers @
Ch:9.95km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:10.13km Nos 2
Solar Blinkers @ 2.00
Ch:10.35km Nos 2
Solar Blinkers @
Ch:11.78km 2.00
Nos 2
Solar Blinkers @
Ch:11.94km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:14km Nos 2
Solar Blinkers @ 2.00
Ch:16.26km Nos 2
Solar Blinkers @
Ch:16.36km 2.00
Nos 2
Solar Blinkers @
Ch:17.63km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:17.81km Nos 2
Solar Blinkers @ 2.00
Ch:17.92km Nos 2
Solar Blinkers @
Ch:20.12km 2.00
Nos 2
Solar Blinkers @
Ch:21.14km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:22.23km Nos 2
Solar Blinkers @ 2.00
Ch:23.51km Nos 2
Solar Blinkers @
Ch:23.9km 2.00
Nos 2
Solar Blinkers @
Ch:24.29km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:24.65km Nos 2
Solar Blinkers @ 2.00
Ch:25.48km Nos 2
Solar Blinkers @ 2.00
Ch:25.68km Nos 2
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads
on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5
mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and
free from streaks and holes complete as per specifications. MORTH Specification No. 803
Speed Breaker@
Sqm 8 3 0.5 12.00
Ch:0.043km
Speed Breaker@ Sqm 8 3 0.5 9.00
Ch:2.75km
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x
5 mm, 330 mm long complete as per clause 800.10 complete as per specifications. Excluding cost of earth work
excavation and PCC for fixing. A. Type - A, “W” MORTH Specification No. 810
Crash Barrier @
Ch:1.525km m 1 148.00 148.00
Crash Barrier @
m 1 124.00 124.00
Ch:1.93km
Crash Barrier @ m 1 114.00 114.00
Ch:2.065km
Crash Barrier @
Ch:2.67km m 1 112.00 112.00
Crash Barrier @
Ch:3.51km m 1 234.00 234.00
Crash Barrier @
m 1 66.00 66.00
Ch:3.885km
Crash Barrier @ m 1 68.00 68.00
Ch:3.95km
Crash Barrier @
Ch:3.975km m 1 72.00 72.00
Crash Barrier @
Ch:4.06km m 1 128.00 128.00
Crash Barrier @
m 1 116.00 116.00
Ch:4.16km
Crash Barrier @ m 1 126.00 126.00
Ch:4.2km
Crash Barrier @
Ch:4.27km m 1 160.00 160.00
Crash Barrier @
Ch:4.445km m 1 114.00 114.00
Crash Barrier @
m 1 86.00 86.00
Ch:4.67km
Crash Barrier @ m 1 186.00 186.00
Ch:4.75km
Crash Barrier @
Ch:4.855km m 1 72.00 72.00
Crash Barrier @
Ch:5.02km m 1 78.00 78.00
Crash Barrier @
m 1 96.00 96.00
Ch:5.905km
Crash Barrier @ m 1 112.00 112.00
Ch:6.055km
Crash Barrier @
Ch:6.705km m 1 156.00 156.00
Crash Barrier @
Ch:6.785km m 1 142.00 142.00
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube
corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09
specification & fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick
aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on
round pipe post of 1.5 Meters height and gouted 60 cm below ground level. The sign post should be painted
with one coat of red oxide paint and two coats of synthetic enamel paint of black and firmly fixed to the ground
by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including
cost & conveyance of all materials, equipment,machinery & Labour with all leads and lifts,Loading charges
necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible
prismatic sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective
elements mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily
removable liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format
and the sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very
high conformability and non-returning dead-fold characteristics required for application on rough and uneven
surfaces.
Per
Market Rate Acre 9.95 2000000.00 19900000.00
16 Solar Blinkers
Solar Blinkers @
Ch:0.26km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:1.4km Nos 2
Solar Blinkers @ 2.00
Ch:3.85km Nos 2
Solar Blinkers @ 2.00
Ch:4.84km Nos 2
Solar Blinkers @ 2.00
Ch:5.65km Nos 2
Solar Blinkers @ 2.00
Ch:5.71km Nos 2
Market Rate 12.00 10800.00 129600.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads
on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5
mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and
free from streaks and holes complete as per specifications. MORTH Specification No. 803
Pedestrian Cross @
Ch:51.55km Sqm 6 3 0.5 18.00
Pedestrian Cross @
Ch:663.85 Sqm 6 3 0.5 18.00
Pedestrian Cross @
Sqm 6 3 0.5 18.00
Ch:663.85
Speed Breaker@
Sqm 6 3 0.5 9.00
Ch:51.54km
Speed Breaker@ Sqm 6 3 0.5 9.00
Ch:51.88km
Speed Breaker@
Ch:52.48km Sqm 6 3 0.5 9.00
Speed Breaker@
Ch:53.73km Sqm 6 3 0.5 9.00
Speed Breaker@
Sqm 6 3 0.5 9.00
Ch:53.98km
Speed Breaker@ Sqm 6 3 0.5 9.00
Ch:54.32km
Speed Breaker@
Ch:54.47km Sqm 6 3 0.5 9.00
Speed Breaker@
Ch:54.51km Sqm 6 3 0.5 9.00
Speed Breaker@
Sqm 6 3 0.5 9.00
Ch:54.55km
Speed Breaker@ Sqm 6 3 0.5 9.00
Ch:54.81km
Speed Breaker@
Ch:54.94km Sqm 6 3 0.5 9.00
Speed Breaker@
Ch:55km Sqm 6 3 0.5 9.00
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm,
60 cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75
x 5 mm, 330 mm long complete as per clause 800.10 complete as per specifications. Excluding cost of earth
work excavation and PCC for fixing. A. Type - A, “W” MORTH Specification No. 810
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube
corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09
specification & fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick
aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported
on round pipe post of 1.5 Meters height and gouted 60 cm below ground level. The sign post should be
painted with one coat of red oxide paint and two coats of synthetic enamel paint of black and firmly fixed to
the ground by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60
cm including cost & conveyance of all materials, equipment,machinery & Labour with all leads and
lifts,Loading charges necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible
prismatic sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as
retroreflective elements mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and
easily removable liner,containing screen printed arrow/slant line pattern in black color in a continuous roll
format and the sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of
exhibiting very high conformability and non-returning dead-fold characteristics required for application on
rough and uneven surfaces.
Curve @
Ch:51.795km m 1 322.301 322.301
Per
Lumsum rate 322.30 19000.00 6123719.00
Meter
17 Solar Blinkers
Solar Blinkers @ 2.00
Ch:51.52km Nos 2
Solar Blinkers @
Ch:51.54km 1.00
Nos 1
Solar Blinkers @
2.00
Ch:51.8km Nos 2
Solar Blinkers @
2.00
Ch:51.834km Nos 2
Solar Blinkers @ 1.00
Ch:51.88km Nos 1
Solar Blinkers @ 2.00
Ch:52.44km Nos 2
Solar Blinkers @ 2.00
Ch:53.04km Nos 2
Solar Blinkers @ 1.00
Ch:53.73km Nos 1
Solar Blinkers @ 1.00
Ch:53.98km Nos 1
Solar Blinkers @ 2.00
Ch:54.02km Nos 2
Solar Blinkers @ 2.00
Ch:54.32km Nos 2
Solar Blinkers @ 1.00
Ch:54.47km Nos 1
Solar Blinkers @
Ch:54.51km 1.00
Nos 1
Solar Blinkers @
Ch:54.55km 1.00
Nos 1
Solar Blinkers @
2.00
Ch:54.65km Nos 2
Solar Blinkers @ 3.00
Ch:54.81km Nos 3
Solar Blinkers @
Ch:54.94km 1.00
Nos 1
Solar Blinkers @
Ch:55km 1.00
Nos 1
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising
of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel
parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam
rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as
per clause 800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A.
Type - A, “W” MORTH Specification No. 810
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification
& fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin
on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of
1.5 Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red
oxide paint and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of
foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost &
conveyance of all materials, equipment,machinery & Labour with all leads and lifts,Loading charges
necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high
conformability and non-returning dead-fold characteristics required for application on rough and uneven
surfaces.
Per
Lumsum rate Meter 431.07 19000.00 8190311.00
17 Solar Blinkers
Solar Blinkers @
Ch:7.4km Nos 2 2.00
Solar Blinkers @
Ch:8.56km Nos 2 2.00
Solar Blinkers @
Ch:12.67km Nos 2 2.00
Solar Blinkers @
Ch:13.27km Nos 2 2.00
Solar Blinkers @
Ch:14.075km Nos 2 2.00
Solar Blinkers @
Ch:15.695km Nos 2 2.00
Solar Blinkers @
Ch:16.15km Nos 2 2.00
Market Rate 14.00 10800.00 151200.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
Pedestrian Cross @
Sqm 8.00 3 0.5 24.00
Ch:16.05km
Pedestrian Cross @ Sqm 8.00 3 0.5 24.00
Ch:663.85
Pedestrian Cross @ Sqm 8.00 3 0.5 24.00
Ch:663.85
Pedestrian Cross @
Ch:663.85 Sqm 8.00 3 0.5 24.00
Speed Breaker@
Sqm 8.00 3 0.5 12.00
Ch:17.25km
Speed Breaker@ Sqm 8.00 3 0.5 12.00
Ch:17.38km
Speed Breaker@ Sqm 8.00 3 0.5 12.00
Ch:17.58km
Speed Breaker@
Ch:17.83km Sqm 8.00 3 0.5 12.00
Speed Breaker@
Sqm 8.00 3 0.5 12.00
Ch:18.098km
544.80 429 233719.20
Note: For Barlane marking thickness of strip shall be 5mm
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series
channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level,
all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364,
metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long
complete as per clause 800.10 complete as per specifications. Excluding cost of earth work excavation and PCC
for fixing. A. Type - A, “W” MORTH Specification No. 810
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification
& fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin
on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of
1.5 Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red
oxide paint and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of
foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost &
conveyance of all materials, equipment,machinery & Labour with all leads and lifts,Loading charges
necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high
conformability and non-returning dead-fold characteristics required for application on rough and uneven
surfaces.
Curve @
m 1 2201.642 2201.642
Ch:17.53km
Curve @
m 1 264.006 264.006
Ch:17.86km
28 Solar Blinkers
Solar Blinkers @
1.00
Ch:16.05km Nos 1
Solar Blinkers @
1.00
Ch:16.58km Nos 1
Solar Blinkers @ 1.00
Ch:16.65km Nos 1
Solar Blinkers @
Ch:17.25km 1.00
Nos 1
Solar Blinkers @
2.00
Ch:17.34km Nos 2
Solar Blinkers @
1.00
Ch:17.38km Nos 1
Solar Blinkers @ 2.00
Ch:17.58km Nos 2
Solar Blinkers @ 2.00
Ch:17.83km Nos 2
Solar Blinkers @ 1.00
Ch:18.098km Nos 1
Market Rate 12.00 10800.00 129600.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
Speed Breaker@
Ch:19.13km Sqm 11.00 3 0.5 16.50
Speed Breaker@
Sqm 11.00 3 0.5 16.50
Ch:19.17km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:19.23km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:19.53km
Speed Breaker@
Ch:19.58km Sqm 11.00 3 0.5 16.50
Speed Breaker@
Sqm 11.00 3 0.5 16.50
Ch:19.77km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:19.93km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:19.93km
Speed Breaker@
Ch:20.05km Sqm 11.00 3 0.5 33.00
Speed Breaker@
Sqm 11.00 3 0.5 16.50
Ch:20.47km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:20.7km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:21.06km
Speed Breaker@
Ch:21.09km Sqm 11.00 3 0.5 16.50
Speed Breaker@
Sqm 11.00 3 0.5 16.50
Ch:21.12km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:21.13km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:22.62km
Speed Breaker@
Ch:22.99km Sqm 11.00 3 0.5 16.50
Speed Breaker@
Sqm 11.00 3 0.5 16.50
Ch:23.73km
Speed Breaker@ Sqm 11.00 3 0.5 16.50
Ch:24.06km
1554.00 429 666666.00
Note: For Barlane marking thickness of strip shall be 5mm
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series
channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level,
all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364,
metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long
complete as per clause 800.10 complete as per specifications. Excluding cost of earth work excavation and PCC
for fixing. A. Type - A, “W” MORTH Specification No. 810
Crash Barrier @
m 1 82.00 82.00
Ch:20.64km
Crash Barrier @
m 1 80.00 80.00
Ch:20.88km
Crash Barrier @ m 1 82.00 82.00
Ch:21.66km
Crash Barrier @
Ch:22.17km m 1 82.00 82.00
Crash Barrier @
m 1 80.00 80.00
Ch:22.98km
12 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification
& fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin
on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of
1.5 Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red
oxide paint and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of
foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost &
conveyance of all materials, equipment,machinery & Labour with all leads and lifts,Loading charges
necessary for satisfactory completion of the work as directed by engineer incharge.
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high
conformability and non-returning dead-fold characteristics required for application on rough and uneven
surfaces.
Curve @
Ch:19.13km Sqm 1 1500.085 0.37
Curve @
Ch:19.46km Sqm 1 1985.062 0.49
Curve @
Ch:19.96km Sqm 1 1600.404 0.40
Curve @
Ch:20.28km Sqm 1 2033.346 0.50
Curve @
Ch:20.64km Sqm 1 3387.877 0.84
Per
Market Rate Acre 2.60 2000000.00 5200000.00
Curve @
m 1 215.290 215.29
Ch:20.28km
Curve @
m 1 329.950 329.95
Ch:20.64km
Lumsum rate Per 1540.57 19000.00 29270830.00
Meter
17 Solar Blinkers
Solar Blinkers @ 2.00
Ch:16.47km Nos 2
Solar Blinkers @ 2.00
Ch:16.545km Nos 2
Solar Blinkers @
Ch:16.825km 2.00
Nos 2
Solar Blinkers @
Ch:17.38km 1.00
Nos 1
Solar Blinkers @
2.00
Ch:17.73km Nos 2
Solar Blinkers @ 1.00
Ch:19.13km Nos 1
Solar Blinkers @
Ch:19.17km 1.00
Nos 1
Solar Blinkers @
Ch:19.23km 1.00
Nos 1
Solar Blinkers @
1.00
Ch:19.53km Nos 1
Solar Blinkers @ 1.00
Ch:19.58km Nos 1
Solar Blinkers @
Ch:19.77km 1.00
Nos 1
Solar Blinkers @
Ch:19.93km 1.00
Nos 1
Solar Blinkers @
1.00
Ch:19.93km Nos 1
Solar Blinkers @ 2.00
Ch:20.05km Nos 2
Solar Blinkers @
Ch:20.47km 1.00
Nos 1
Solar Blinkers @
Ch:20.7km 1.00
Nos 1
Solar Blinkers @
1.00
Ch:21.06km Nos 1
Solar Blinkers @ 2.00
Ch:21.075km Nos 2
Solar Blinkers @
Ch:21.09km 1.00
Nos 1
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass
Beads on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5
mm is exclusive of surface applied glass beads as per IRC:35 standards specified. The finished surface to
be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No.
803
Pedestrian Cross @
Ch:4.2km Sqm 8.00 3 0.5 24.00
Speed Breaker@
Sqm 8.00 3 0.5 12.00
Ch:3.34km
Speed Breaker@ Sqm 8.00 3 0.5 12.00
Ch:3.39km
Speed Breaker@ Sqm 8.00 3 0.5 12.00
Ch:3.42km
Speed Breaker@
Ch:3.48km Sqm 8.00 3 0.5 24.00
Speed Breaker@
Sqm 8.00 3 0.5 24.00
Ch:4.2km
Speed Breaker@ Sqm 8.00 3 0.5 12.00
Ch:4.93km
Speed Breaker@ Sqm 8.00 3 0.5 12.00
Ch:5.37km
1012.80 429 434491.20
Note: For Barlane marking thickness of strip shall be 5mm
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
7 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly
fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x
45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Standard data Book data)
9 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x
75 x 5 mm, 330 mm long complete as per clause 800.10 complete as per specifications. Excluding cost of
earth work excavation and PCC for fixing. A. Type - A, “W” MORTH Specification No. 810
13 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible
prismatic sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as
retroreflective elements mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive
and easily removable liner,containing screen printed arrow/slant line pattern in black color in a
continuous roll format and the sheeting shall be extremely flexible and easy to bend or wrap around
objects,capable of exhibiting very high conformability and non-returning dead-fold characteristics
required for application on rough and uneven surfaces.
15 Solar Blinkers
Solar Blinkers @ 1.00
Ch:2.73km Nos 1
Solar Blinkers @
Ch:3.18km 1.00
Nos 1
Solar Blinkers @
1.00
Ch:3.34km Nos 1
Solar Blinkers @
1.00
Ch:3.39km Nos 1
Solar Blinkers @ 1.00
Ch:3.42km Nos 1
Solar Blinkers @
Ch:3.48km 2.00
Nos 2
Solar Blinkers @
2.00
Ch:4.2km Nos 2
Solar Blinkers @
1.00
Ch:4.93km Nos 1
Solar Blinkers @ 1.00
Ch:5.37km Nos 1
Rate
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate AW @ 3% Including Amount
AW
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
8 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising of 3
mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed
on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 800.10
complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W” MORTH
Specification No. 810
9 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification &
fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on both
sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of 1.5 Meters
height and gouted 60 cm below ground level. The sign post should be painted with one coat of red oxide paint and two
coats of synthetic enamel paint of black and firmly fixed to the ground by means of foundation with M 20 grade
cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials,
equipment,machinery & Labour with all leads and lifts,Loading charges necessary for satisfactory completion of the
work as directed by engineer incharge.
10 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable liner,containing
screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting shall be extremely
flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability and non-returning
dead-fold characteristics required for application on rough and uneven surfaces.
11 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP 67
-2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix
material
Per
Market Rate Acre 10.16 2000000.00 20320000.00
Rate
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate AW @ 3% Including Amount
AW
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
9 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification &
fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on
both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of 1.5
Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red oxide
paint and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of foundation with
M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all
materials, equipment,machinery & Labour with all leads and lifts,Loading charges necessary for satisfactory
completion of the work as directed by engineer incharge.
10 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
11 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections
and ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic
compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs
as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and
using SDBC mix material
12 Solar Blinkers
Market Rate Nos 2 2.00 10800.00 324 11124 22248.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass
beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and holes
complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
8 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements mounted
on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable liner,containing screen
printed arrow/slant line pattern in black color in a continuous roll format and the sheeting shall be extremely flexible
and easy to bend or wrap around objects,capable of exhibiting very high conformability and non-returning dead-fold
characteristics required for application on rough and uneven surfaces.
9 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble stones
60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and ramp on
either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder portion 1.7mts in
length on either side, completing with road marking paint with applied thermoplastic compound with reflecting glass
beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP 67 -2010 (for details refer
IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix material
10 Solar Blinkers
Market Rate Nos 14 14.00 10800.00 151200.00
11 Supply & Installation of Rigid Median Marker made of tough, high impact resistant, injection-molded, thermoplastic
body with an isosceles trapezoidal structure of length, width and height not less than 15cm, 10cm and 10cm
respectively and thickness not less than 1.8mm, the body structure shall be rounded suitably. The plastic used for
molding the Median Marker shall conform to ASTM D256. The logo of the manufacturer shall be embossed on
either side of the body in the injection molding process. The Median Marker shall have rectangular-shaped, fluorescent
yellow color retro-reflective sheeting of size not less than 8.5cm*8.5cm and with fully reflective micro prismatic cube
corners as its retro-reflective elements as per IRC 67 2012. The retro-reflective sheeting shall be a one or both sides of
the Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism,
sheeting damage, etc. The Median Marker shall be fixed by a combination of epoxy adhesive and grouting.
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
Pedestrian Cross at
Sqm 9 3 0.5 13.5
Ch 22.68 KM
Pedestrian Cross at Sqm 7 3 0.5 10.5
Ch 24.29 KM
Pedestrian Cross at Sqm 7 3 0.5 10.5
Ch 24.40 KM
Pedestrian Cross at Sqm 7 3 0.5 10.5
Ch 25.98 KM
Pedestrian Cross at Sqm 7 3 0.5 10.5
Ch 26.10 KM
700.2 429 300385.80
Note: For Barlane marking thickness of strip shall be 5mm
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
8 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising of
3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause
800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W”
MORTH Specification No. 810
9 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09 specification &
fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminum skin on
both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on round pipe post of 1.5
Meters height and gouted 60 cm below ground level. The sign post should be painted with one coat of red oxide paint
and two coats of synthetic enamel paint of black and firmly fixed to the ground by means of foundation with M 20
grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including cost & conveyance of all materials,
equipment,machinery & Labour with all leads and lifts,Loading charges necessary for satisfactory completion of
the work as directed by engineer incharge.
10 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
11 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP
67 -2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix
material
12 Solar Blinkers
Market Rate Nos 26 26.00 10800.00 280800.00
Curve @
Ch:27.57km Sqm 1 3277.027 0.81
Per
Market Rate 6.31 2000000.00 12620000.00
Acre
Curve @
m 1 54.923 54.923
Ch:27.57km
Lumsum rate Per
255.07 19000.00 4846254.00
Meter
Rate
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate AW @ 3% Including Amount
AW
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
7 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road
level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and
IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330
mm long complete as per clause 800.10 complete as per specifications. Excluding cost of earth work excavation
and PCC for fixing. A. Type - A, “W” MORTH Specification No. 810
8 Manufacturing,Supply and installation of Retro- reflective Hazard Marker signbaords made out of cube
corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:2012 & ASTM D 4956-09
specification & fixed over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick
aluminum skin on both sides & fixed over back support frame of 25x25x 3mm MS angle frame. Supported on
round pipe post of 1.5 Meters height and gouted 60 cm below ground level. The sign post should be painted
with one coat of red oxide paint and two coats of synthetic enamel paint of black and firmly fixed to the ground
by means of foundation with M 20 grade cement, concrete foundation size of 45 cm x 45 cm x 60 cm including
cost & conveyance of all materials, equipment,machinery & Labour with all leads and lifts,Loading charges
necessary for satisfactory completion of the work as directed by engineer incharge.
9 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible
prismatic sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective
elements mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high
conformability and non-returning dead-fold characteristics required for application on rough and uneven
surfaces.
10 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections
and ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for
shoulder portion 1.7mts in length on either side, completing with road marking paint with applied
thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro
reflective traffic signs as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for formation
width of 7.50 mtrs. and using SDBC mix material
11 Solar Blinkers
Market Rate Nos 24 24.00 10800.00 324 11124 266976.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
8 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising of
3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause
800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W”
MORTH Specification No. 810
9 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
10 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP
67 -2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix
material
11 Solar Blinkers
Market Rate Nos 4 4.00 10800.00 43200.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing. (Standard data Book data)
4 KSRRB M800-35. Supply and Installtion of Moulded Shank Raised Pavement Markers made of polycarbonate
and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens
capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg
tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97 – DO III Dt
11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 mm and with minimum
reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of
the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body
is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without
nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by
the engineer.
5 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising
of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel
parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam
rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per
clause 800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type -
A, “W” MORTH Specification No. 810
6 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
7 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections
and ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for
shoulder portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic
compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs
as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and
using SDBC mix material
8 Solar Blinkers
Market Rate Nos 8 8.00 10800.00 86400.00
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
(900 MM Equilateral triangle - TYPE XI) Nos 56 56 3466 103.98 3569.98 199918.88
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
7 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising of
3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause
800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W”
MORTH Specification No. 810
8 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
9 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP
67 -2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix
material
10 Solar Blinkers
Market Rate Nos 27 27.00 10800.00 324 11124.00 300348.00
13 Supply & Installation of Rigid Median Marker made of tough, high impact resistant, injection-molded, thermoplastic
body with an isosceles trapezoidal structure of length, width and height not less than 15cm, 10cm and 10cm
respectively and thickness not less than 1.8mm, the body structure shall be rounded suitably. The plastic used for
molding the Median Marker shall conform to ASTM D256. The logo of the manufacturer shall be embossed on
either side of the body in the injection molding process. The Median Marker shall have rectangular-shaped,
fluorescent yellow color retro-reflective sheeting of size not less than 8.5cm*8.5cm and with fully reflective micro
prismatic cube corners as its retro-reflective elements as per IRC 67 2012. The retro-reflective sheeting shall be a
one or both sides of the Median Marker and shall be edge protected with no exposed edges which will prevent edge
lifting, vandalism, sheeting damage, etc. The Median Marker shall be fixed by a combination of epoxy adhesive and
grouting.
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and holes
complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly
designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing. (Standard data Book data)
8 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable liner,containing
screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting shall be extremely
flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability and non-returning
dead-fold characteristics required for application on rough and uneven surfaces.
9 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble stones
60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and ramp on
either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder portion 1.7mts
in length on either side, completing with road marking paint with applied thermoplastic compound with reflecting
glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP 67 -2010 (for
details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix material
10 Solar Blinkers
Market Rate Nos 29 29.00 10800.00 313200.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
11 For Land Aqisition and Construction of Road
Curve @ Ch:18.810
km , 18.930 km &
19.100km Sqm 1 14154.454 3.50
Curve @
Ch:26.26km Sqm 1 8509.309 2.10
Curve @
Ch:27.21km Sqm 1 9897.674 2.45
Curve @
Ch:29.97km Sqm 1 6140.833 1.52
Per
Market Rate Acre 9.57 2000000.00 19140000.00
Curve @ Ch:18.810
km , 18.930 km & m 1 700.000 700
19.100km
Curve @
Ch:26.26km m 1 480.000 480
Curve @
Ch:27.21km m 1 540.000 540
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
Curve @
Ch:29.97km m 1 240.000 240
Per
Lumsum rate Meter 1960.00 19000.00 37240000.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
6 KSRRB M800-35. Supply and Installtion of Moulded Shank Raised Pavement Markers made of polycarbonate
and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable
of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in
accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97 – DO III Dt 11.06. 1997. The
height, width and length shall not exceed 50 mm, 100 mm and 102 mm and with minimum reflective area of 13
Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated
cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a
minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and
using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer.
8 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP 67
-2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix
material
9 Solar Blinkers
Market Rate Nos 12 12.00 10800.00 129600.00
Per
Market Rate 24.11 2000000.00 48220000.00
Acre
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
11 Proposed Curve Cost
Curve @ Ch:0.5km m 1 583.923 583.923
Curve @
Ch:3.580,3.740 & m 1 473.706 473.706
3.840km
Curve @ Ch:5.250,
5.500, 5.740 & m 1 975.929 975.929
6.010km
Per
Lumsum rate Meter 2387.66 19000.00 45365464.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
8 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising of 3
mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed
on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 800.10
complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W” MORTH
Specification No. 810
9 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
10 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC SP 67
-2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and using SDBC mix
material
11 Solar Blinkers
Market Rate Nos 10 10.00 10800.00 108000.00
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate Amount
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from
streaks and holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60
cm below ground level as per approved drawing. (Standard data Book data)
6 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections
and ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for
shoulder portion 1.7mts in length on either side, completing with road marking paint with applied
thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro
reflective traffic signs as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for formation
width of 7.50 mtrs. and using SDBC mix material
7 Solar Blinkers
Market Rate Nos 4 4.00 10800.00 43200.00
Rate
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate AW @ 3% Including Amount
AW
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and
informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium
sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below
ground level as per approved drawing. (Standard data Book data)
8 Providing road humps for the entire formation width, using bituminous premix materials and heavy duty cobble
stones 60 mm thick, having road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections
and ramp on either side of road hump of 0.85 mtr (wide), including providing WBM (2 layers) for shoulder
portion 1.7mts in length on either side, completing with road marking paint with applied thermoplastic
compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs
as per IRC SP 67 -2010 (for details refer IRC 99-1988) for single lane for formation width of 7.50 mtrs. and
using SDBC mix material
9 Solar Blinkers
Market Rate Nos 8 8.00 10800.00 324 11124 88992.00
Curve @
Ch:28.98km m 1 303.350 303.35
Curve @
Ch:30.15km m 1 390.424 390.424
Rate
Sl. No Item of work Unit No. Length Width Depth Quantity. Rate AW @ 3% Including Amount
AW
1 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on
Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and
holes complete as per specifications. MORTH Specification No. 803
2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory
sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm
thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of
properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as
per approved drawing. (Standard data Book data)
7 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” metal beam crash barrier comprising of
3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and
fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause
800.10 complete as per specifications. Excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W”
MORTH Specification No. 810
8 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow coloured flexible prismatic
sheeting with non-metallic prismatic lens, formed in a transparent, synthetic resin, as retroreflective elements
mounted on a Aluminum (Al) foil with a pre-coated pressure sensitive adhesive and easily removable
liner,containing screen printed arrow/slant line pattern in black color in a continuous roll format and the sheeting
shall be extremely flexible and easy to bend or wrap around objects,capable of exhibiting very high conformability
and non-returning dead-fold characteristics required for application on rough and uneven surfaces.
Curve @
Ch:19.17km Sqm 1 5306.498 1.31
Per
Market Rate Acre 1.88 2000000.00 3760000.00
Curve @
m 1 249.380 249.38
Ch:19.17km
Per
Lumsum rate Meter 611.38 19000.00 11616182.00
1
No L B D Qty Rate Amount