This document outlines the steps to perform a spectrum mode analysis using a spectrophotometer. The steps include: 1) selecting photometric mode and defining a method with wavelengths to analyze; 2) selecting the raw data type and file path to save results; 3) performing an autozero with references on both sides; 4) removing one reference and reading the sample; 5) inputting the sample ID and reading the unknown absorbance.
This document outlines the steps to perform a spectrum mode analysis using a spectrophotometer. The steps include: 1) selecting photometric mode and defining a method with wavelengths to analyze; 2) selecting the raw data type and file path to save results; 3) performing an autozero with references on both sides; 4) removing one reference and reading the sample; 5) inputting the sample ID and reading the unknown absorbance.
This document outlines the steps to perform a spectrum mode analysis using a spectrophotometer. The steps include: 1) selecting photometric mode and defining a method with wavelengths to analyze; 2) selecting the raw data type and file path to save results; 3) performing an autozero with references on both sides; 4) removing one reference and reading the sample; 5) inputting the sample ID and reading the unknown absorbance.