Professional Documents
Culture Documents
Page 1 of 7
Shutdown SIS
Previous Screen
i06617696
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Bracket As 2
B 1P-2420 Transmission Repair Stand 1
C 140-7742 Sleeve 2
D 154-6181 Forcing Bolt 2
E 8B-7551 Bearing Puller Gp 1
Start By:
NOTICE
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
https://siswebsgt.trakindo.co.id/sisweb/sisweb/techdoc/techdoc_print_page.jsp?return... 11/19/2020
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine... Page 2 of 7
Illustration 1 g01349310
1. Use Tooling (A), Tooling (C), and a suitable lifting device to position service brake (1) onto
Tooling (B). The weight of service brake (1) is approximately 272 kg (600 lb).
Illustration 2 g01349321
Illustration 3 g01349338
3. Remove shims (4). Use Tooling (C) and a suitable lifting device to remove sprocket (5).
The weight of sprocket (5) is approximately 36 kg (80 lb).
https://siswebsgt.trakindo.co.id/sisweb/sisweb/techdoc/techdoc_print_page.jsp?return... 11/19/2020
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine... Page 3 of 7
Illustration 4 g06048304
Illustration 5 g01349339
https://siswebsgt.trakindo.co.id/sisweb/sisweb/techdoc/techdoc_print_page.jsp?return... 11/19/2020
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine... Page 4 of 7
Illustration 6 g01349519
5. Remove O-ring seal (7). Use Tooling (D) to remove bearing cone (8). Use Tooling (A) and
a suitable lifting device to remove cover (9). The weight of cover (9) is approximately 42 kg
(93 lb).
Illustration 7 g06048314
Illustration 8 g06048320
Note: Note the quantity and the order of plates (12) and discs (13).
https://siswebsgt.trakindo.co.id/sisweb/sisweb/techdoc/techdoc_print_page.jsp?return... 11/19/2020
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine... Page 5 of 7
Illustration 9 g06048340
Illustration 10 g01349359
Illustration 11 g01349430
3. Use Tooling (A) to remove housing (18). The weight of housing (18) is approximately
77 kg (170 lb). Position housing (18) onto suitable blocking.
https://siswebsgt.trakindo.co.id/sisweb/sisweb/techdoc/techdoc_print_page.jsp?return... 11/19/2020
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine... Page 6 of 7
Illustration 12 g01349436
4. Remove the first half of Duo-Cone seal (19). Refer to Disassembly and Assembly, "Duo-
Cone Conventional Seals - Remove". Remove bearing cup (20).
Illustration 13 g01349462
5. Remove the second half of Duo-Cone seal (19). Refer to Disassembly and Assembly, "Duo-
Cone Conventional Seals - Remove".
Illustration 14 g01349453
https://siswebsgt.trakindo.co.id/sisweb/sisweb/techdoc/techdoc_print_page.jsp?return... 11/19/2020
ERROR: stackunderflow
OFFENDING COMMAND: ~
STACK: