Professional Documents
Culture Documents
4823-DS-2260-0 (T-506 Slop Oil Storage Tank)
4823-DS-2260-0 (T-506 Slop Oil Storage Tank)
4823-DS-2260
DATA SHEET FOR Prep MYI Chk. DF Apr PR
SLOP OIL STORAGE TANKS Date 28-Jan-10
Sheet 1 of 1 Rev. 0
REMARKS
1. Net working capacity of the tank is execlusive of dead stock and space above liquid surface due to pontoon height.
2. Check wind girder requirement based on shell thicknesses exclusive of corosion allowance.
3. Epoxy coat on tank bottom interior and shell interior upto 2m height.
4. Connections for side entry mixers to be provided.
5. Clean outdoor to be provided.
6. Manufacturer to fill in the Data Sheet.
7. Bottom (underside) of storage tanks cathodically protected, inside bottom shall be protected by sacrificial anodes.
Spec. No. 0880-SA-7552
DATA SHEET FOR Prep. by SMS Apr. by NMC
CRUDE STORAGE TANKS Date 30/10/1998
Sheet 2 of 3 Rev. 1
1 Manufacturer
Address
City State Zip Code Phone
Serial No.
2 Fabricator
Address
City State Zip Code Phone
Serial No.
3 Material Specifications: Shell
Roof
Bottom
Structurals
4 No of Shell Courses
5 Plate Wdiths, Length and Thickness (including Corrosion Allowance), in inches:
1) 4) 7)
2) 5) 8)
3) 6) 9)
6 Tank Bottom Plate Thickness: inches Lap But Seams
Slope 1 : 120 To From Centre
7 Minimum Width and Thickness of Bottom Annular Plates (3.5), in inches:
8 Roof-to-Shell Detail (Figure-1)
9 Intermediate Wind Girder? Yes No Top Wind Girder for Use as Walkway? Yes No
10 Roof Type Supported Self-supported Floating
Slope or Radius mm
11 Roof Plate Thickness mm Lap Butt Joint
12 Paint
- Shell Exterior? Yes No Interior? Yes No
Surface Preparation Sand Blasting - SA 2.5 (Inside Lower Portion - 2m)
- Bottom Underside? Yes No Interior? Yes No
Surface Preparation Sand Blasting - SA 2.5
- Structural Steel Exterior? Yes No Interior? Yes No
Specification Sand Blasting - SA 2.5
13 Tank Bottom Coating Interior? Yes No Material
Application Specification
14 Inspection By Shop Owner Field Owner
15 Weld Examination Radiograph Yes
Supplementary Liquid Penetrant or Ultrasonic
16 Films Provided by Contractor Property of Owner
17 Leak Testing Bottom Yes Roof Yes
Shell Yes
18 Mill Test Reports Required? Yes No
Plate Yes Structural Shapes Yes
19 Purchaser's Reference Drawing
20 Tank Size Diameter 140 ft. (42.68m) Height 48 ft. (14.63m)
21 Date of Standard 650 Edition/Revision Latest
REMARKS
Spec. No. 0880-SA-7552
DATA SHEET FOR Prep. by SMS Apr. by NMC
CRUDE STORAGE TANKS Date 30/10/1998
Sheet 3 of 3 Rev. 1
11 Roof Nozzles, including Venting Connection (See Figures 3.14 and 3.15 and Tables 3.16 and 3.17):
Gauge Hatch
Refer Drawing No. 4790-PB-101 Tank Gauging
System
Temp Sensor
NOTE: Sketches and/or separate sheets may be attached to cover special requirements.