1. Inlet compressed air connection customer side 1/2" female thread.
Connect compressed air. 2. Shut-off valve self-venting 3. Adjustment valve for the bypass. When the solenoid valve (way 1-2) is closed, permanent air can be supplied to the sound generator via the bypass for cooling or flushing (way 3-2). 4. Pressure regulator. Pull the cap upwards and turn it until the pressure at 5. Pressure gauge between 5.5 and 6 bar. 6. Magnetic valve. When not actuated, way 1-2 is closed and way 3-2 is open. The solenoid valve can be opened manually by turning the brass screw on top of the solenoid valve (below the coil) a quarter turn to the right. 7. Seventh magnet coil. 230VAC, 110VAC or 24VCDC 8. Outlet to the horn 3/4" external thread