Professional Documents
Culture Documents
8D78-16237 v2.0
en/MX
2. Hazards identification
This preparation is hazardous per the following GHS criteria
GHS-Classification
Los puntos finales que están "no clasificados", no pueden clasificarse o no son aplicables no se muestran.
GHS-Labelling
Hazard symbols
Hazard statements
H315 : Causes skin irritation.
H317 : May cause an allergic skin reaction.
H319 : Causes serious eye irritation.
H351 : Suspected of causing cancer.
H360 : May damage fertility or the unborn child.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 1-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
Precautionary statements
P201 : Obtain special instructions before use.
P272 : Contaminated work clothing should not be allowed out of the workplace.
P280 : Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 : IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P308 + P313 : IF exposed or concerned: Get medical advice/ attention.
P321 : Specific treatment (see supplemental first aid instructions on this label).
P333 + P313 : If skin irritation or rash occurs: Get medical advice/ attention.
P337 + P313 : If eye irritation persists: Get medical advice/ attention.
P405 : Store locked up.
P501 : Dispose of contents/container in accordance with local regulations.
P261 : Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse.
The following percentage of the mixture consists of ingredient(s) with unknown acute toxicity:
0%
3. Composition/information on ingredients
Mixture of synthetic resins, pigments, and solvents as well as water
Components
Skin contact
Do NOT use solvents or thinners. Take off all contaminated clothing immediately.
Inhalation
Avoid inhalation of vapour or mist. Move to fresh air in case of accidental inhalation of vapours. If breathing is irregular or
stopped, administer artificial respiration. If unconscious place in recovery position and seek medical advice. If symptoms persist,
call a physician.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 2-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
Ingestion
If swallowed, seek medical advice immediately and show this safety data sheet (SDS) or product label. Do NOT induce vomiting.
Keep at rest.
Inhalation
May cause nose and throat irritation.
Ingestion
May result in gastrointestinal distress.
5. Firefighting measures
Suitable extinguishing media
Water spray, Dry chemical, Foam
Environmental precautions
Do not let product enter drains. Notify the respective authorities in accordance with local law in the case of contamination of
rivers, lakes or waste water systems.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 3-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
combustible dust clouds. Build up of fine material should be cleaned using gentle sweeping or vacuuming in accordance with best
practices. Cleaning methods (e.g. compressed air) which can generate potentially combustible dust clouds should not be used.
Storage
Protective equipment
Personal protective equipment should be worn to prevent contact with eyes, skin or clothing.
Respiratory protection
Do not breathe vapors or mists. Wear an appropriate, properly fitted NIOSH approved respirator during application and until all
vapors and spray mists are exhausted unless air monitoring demonstrates vapor/mist levels are below applicable limits. If
respirators are required, use a properly fitted air-purifying respirator with organic vapor cartridges (NIOSH approved TC-23C) and
particulate filter (NIOSH TC-84A). In confined spaces, or in situations where continuous spray operations are typical, or if proper
air-purifying respirator fit is not possible, wear a positive pressure, supplied-air respirator (NIOSH TC-19C). In all cases, follow
respirator manufacturer’s directions for respirator use.‘
Eye protection
Desirable in all industrial situations. Goggles are preferred to prevent eye irritation. If safety glasses are substituted, include
splash guard or side shields.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 4-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
Hygiene measures
Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.
Conditions to avoid
Stable under recommended storage and handling conditions (see section 7).
Materials to avoid
None reasonably foreseeable.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 5-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
Hazardous Polymerization
Will not occur.
Inhalation
May cause nose and throat irritation.
Ingestion
May result in gastrointestinal distress.
Delayed and immediate effects and also chronic effects from short and long term exposure:
% of unknown composition: 0 %
Skin corrosion/irritation
Respiratory sensitisation
Not classified according to GHS criteria
Skin sensitisation
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 6-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
Carcinogenicity
Aspiration toxicity
Not classified according to GHS criteria
Bioaccumulative potential
No information available.
Mobility in soil
No information available.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 7-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
DOT
Proper shipping name: Not regulated
The transport information is for bulk shipments. Exceptions may apply for smaller containers.
DSL Status
All components of the mixture are listed on the DSL.
Photochemical Reactivity
Non-photochemically reactive
Regulatory information
Key:
EPCRA Emergency Planning and Community Right-to-know Act (aka Title III, SARA)
313 Information Section 313 Supplier Notification - The chemicals listed above with
a ’Y’ in the 313 column are subject to reporting requirements of
Section 313 of the Emergency Planning and Community
Right-to-Know act of 1986 and of 40 CFR 372.
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 8-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589
SAFETY DATA SHEET
8D78-16237 v2.0
en/MX
RQ Reportable Quantity
NA not available
NR not regulated
Glossary of Terms:
Other information including information on the preparation and updating of safety data sheets:
The safety data sheet should have the following legend: The information is considered correct, but is not exhaustive and will
be used only as guidance, which is based on the current knowledge of the chemical or mixture and is applicable to the
appropriate safety precautions for the product.
Report version
Version Changes
2.0 2, 3, 8, 9, 12, 14
+52 5366-4700
axalta.mx
c 2019 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 9-9
Copies may be made only for those using Axalta Coating Systems products. 2019-06-06
B13185589