Point of Application ● DI120-150 Detection ○ Speed CPU ● DI180-420 [Meaning] [Actions to take] When C1ST does not turn ON within 500ms after C1ST ON command is outputted from Run CPU. 1. Check the power status of C110 and P48.
2. Check C1ST coil and auxiliary contact for screw
connection status. Check the connection status of RC connected to C1ST coil body.
[Diagram] 3. Check the connection and contact status of C1ST
GD operation circuit(Drawing3x02223). Refer to 3x02223, CTL C[8] OS_C1ST 0x530C 4. Check the connection and contact status of C1ST C110 D110 auxiliary circuit(Drawing3x02227). R5SC R2LD STR1-08 DOR-230 DOR-230 RCC-14 A2 C1VD C A1 12 C1ST 5. Check TCD88. 8 9 5 53 54 CTT-01 CTT-02 DOR-210 PCB 1)Turn ON C1ST by force and check the input buffer(0x501F) data. If there’s no changes found, try replacing DOR-230 PCB. Refer to 3x02227, I/O C[1] 2)If input signal is normal, DOR-230 PCB output buffer P48 GD48 may be inferior. RCA-08 DOR-230 3)If the problem exists even after replacing PCB, it may C1ST C IS_C1ST be coming from C1ST self defect. 13 14 0x501F INA-15 6. Check TCD89.
Perform check by the opposite way of above item 5.
If TCD89 occurs even though C1ST OFF operation is normal, try increasing OFF DELAY TIMER value above 500ms. If TCD89 does not occurs by this action, C1ST OFF’s characteristic inferior.