STRESS AND STRAIN and Poisons Ratio.1. (ME Bd. Oct.
2000) Compute the induced/compressive
stress, in kpa, of a steel solid shafting of 50 mm diameter and 800 mm in length that is subjected to an increase of temperature by 80oC. 2. (ME Bd. Oct. 2003) What is the decrease in lateral dimension due to an axial tensile force of 50,000 lbs in abar 3 inch on each side and 6 feet long? The material is steel (E = 3.0 x 107 psi, μ = 0.3). SITUATIONAL PROBLEM (Oct 2003)An 8 inches long bar is elongate to 8.0065 inches for an applied load of 5000 lbs in which its cross-sectional area is 0.25 in2.A. Find the modulus of elasticity, psi.A. 22.62 x 106 psiB. 24.62 x 106 psiC. 26.62 x 106 psiD. 28.62 x 106 psiB. Find the tensile stress , psi.A. 20,000 psiB. 15,000 psiC. 20,000 psiD. 25,000 psiC. Find the strain.A. 6.309 x 10-4B. 8.12 x 10-4C. 10.27 x 10-4D. 12.09 x 10-4D. Find the stress for a load of 5000 kg, kg/cm2. A. 2800B. 2900C. 3000D. 3100 E. Find the stress if the bar is heated at a temperature change of 80oF, psi.A. 15,08.45 B. 10,083.90C. 5,088.40 D. 12,802.40
ALCORCON ENGINEERING REVIEW CENTERCebu:
4TH Flr. Coast Pacific Downtown Center, Sanciangco St. Cebu City (Tel # 254-33-84)Manila Branch: 3rd floor JPD Bldg 1955, C M Recto corner N. Reyes St, Sampaloc, Manila Tel # (02) 736-4438Machine Design Problems – DAY 2SHAFT SUBJECTED TO PURE TORSION ONLY1. (ME Bd. Oct. 1998) What power would a spindle 55 mm in diameter transmit at 480 rpm stress allowed forshort shaft is 59 N/mm2? 2. (ME Bd. Oct. 2000) Find the torsional deflection, in degrees, of a solid steel shaft, 110 mm OD x 1.4 m longsubject to 3.1 x 106 N-mm torque. The torsional modulus of elasticity is 80,000 N/mm-mm. 3. (ME Bd. Apr. 96) Compute the linear shaft diameter to transmit 12 HP at 180 rpm with torsional deflection of0.08 degrees per foot length. 4. (ME Bd. Apr. 95) A hollow shaft with outside diameter of 14 cm and wall thickness of 0.8 cm transmits 200KW at 400 rpm. What must be the angular deflection of the shaft if the length is 5 meters? The material of theshaft is C4140 steel.