Professional Documents
Culture Documents
The PCE Hydraulic Wireline Jar is a wireline service tool designed for dependable upward
jarring during wireline operations.
When a strain is taken on the wireline the top sub and mandrel are pulled upward while the
piston is impeded in its upward movement by the hydraulic fluid. This delaying action
allows sufficient strain to be taken on the line to strike a blow of the required intensity.
When the piston passes from the restricted cylinder bore to the enlarged section, fluid
resistance ceases allowing the mandrel to travel upward at great speed to strike the middle
body insert and transmit the jarring force.
The Jar is closed for repeat operation by slacking off toolstring weight as many times as
necessary to complete the operation. The PCE Hydraulic Jar should normally be run above
a set of Spang or Link Jars.
Specifications
N.B. The tools shown on this page can be used as a part of a PCE ‘Grip Release’ Breech Lock toolstring, by using the appropriate
PCE ‘Grip Release’ Breech Lock Connector. These tools can also be supplied with Integral PCE ‘Grip Release’ Breech Lock
connections. Please contact PCE for more details.