Professional Documents
Culture Documents
530R Ang
530R Ang
TYPE 530R
CHARACTERISTIC:
Diameter - 15 -200 mm;
Pressure - 160 bar;
Temperature - up to 560°C;
Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / disc and disc ring / drive type
Example: 530 / --- / --- / --- / R
Example: 530 / S / U / --- / R
Ends Sign Body material Sign Disc and disc ring Sign Drive type Sign
Standard - flanged --- (P250GH) C 22.8 Standard R Hand wheel ---
---
Butt weld ends S or GP240GH AUMA drive NA
Socket weld SW 16Mo3 or G20Mo5 U NWA drive NW
Threaded G 13CrMo4-5 or G17CrMo5-5 A MODACT drive NM
Pneumatic drive NP
APPLICATION:
Stop globe valve is designed to open and stop the flow. The valve can be used as a regulating
device.
"SW" DN 50 ÷ 200
Socket
DN 15 ÷ 40 Weld
Dk
h
"G"
H
g
f
"S"
Do
Dp
Dz
°
60
30°
d
Dw
Dz
do n
abcde
®
„ W A KM E T ” spó łka jawna
Kaczmarek, Krzywdziński, Wachowski, Wilczyński
Bodzanów 75 48-340 GŁUCHOŁAZY 1
tel.+48(077) 439-40-20, fax +48(077) 439-18-72
E-mail: wakmet@wakmet.com.pl http: www.wakmet.com.pl
MATERIALS:
Versions Standard U A Other versions
O O O
Parts TMAX 450 C TMAX 530 C TMAX 560 C -
Body, bonnet (P250GH) C22.8 16Mo3 13CrMo4-5
(P250GH) C22.8, 16Mo3, 13CrMo4-5
DN 15-40 (1.0460) (1.5415) (1.7335)
Body, bonnet GP240GH G20Mo5 G17CrMo5-5
GP240GH, G20Mo5, G17CrMo5-5
DN 50-200 (1.0619) (1.5419) (1.7357)
Seat ring G 18 8 Mn (1.4370) Stellit
X30Cr13 X30Cr13 13CrMo4-5
Disc DN 15-50 X30Cr13, 13CrMo4-5
(1.4028) (1.4028) (1.7335)
P250GH P250GH 13CrMo4-5
Disc DN 65-200 P250GH, 13CrMo4-5
(1.0460) (1.0460) (1.7335)
Disc ring G 18 8 Mn (1.4370) Stellit
X20Cr13 X17CrNi16-2 X39CrMo17-1
Stem BT9
(1.4021) (1.4057) (1.4122)
Gasket Grafit + austenite
Wheel Cast iron
Special materials on request; modifications reserved.
DIMENSIONS:
Standard - flanged With dutt weld ends
Kvs
DN d Dz Dp Do do n L g. f H h Dk Weight Dz Dw L Weight
15 15 105 45 75 14 4 210 20 2 175 13 120 5,40 22 17 160 3,00 3,02
20 20 130 58 90 18 4 230 22 2 215 13 120 9,70 28 21 160 3,00 4,99
25 24 140 68 100 18 4 230 24 2 215 13 120 10,60 35 27 160 2,80 9,87
32 30 155 78 110 22 4 260 24 2 245 16 160 15,60 44 34,5 230 10,10 13,87
40 38 170 88 125 22 4 260 28 3 245 18 160 17,30 50 43 230 9,40 22,26
50 47 195 102 145 30 4 300 30 3 300 22 180 29,00 62 52,5 300 8,70 43,41
65 63 220 122 170 26 8 340 34 3 330 30 280 47,80 77 65 340 16,00 79,6
80 78 230 138 180 26 8 380 36 3 375 40 360 62,00 91 76,5 380 23,00 114,62
100 95 265 162 210 30 8 430 40 3 520 55 360 112,00 117 98,5 430 55,00 188,4
125 120 315 188 250 33 8 500 44 3 600 65 400 165,00 144 120,5 500 70,00 294,38
150 145 355 218 290 33 12 550 44 3 700 70 500 251,00 172 144,5 550 174,00 423,9
200 195 430 285 360 36 12 650 60 3 900 110 600 295,00 223 189 650 220,00 753,6
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Maximal working pressure at working temperature
PN
Body material 20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 480°C 500°C 510°C 520°C 530°C 540°C 550°C 560°C
bar
(P250GH)C 22.8
160 160,0 160,0 160,0 144,8 129,5 114,3 99,1 83,8 52,5 - - - - - - - -
(1.0460)
16Mo3
160 160,0 160,0 160,0 160,0 156,1 137,1 129,5 121,9 118,0 89,7 70,8 57,8 44,9 35,8
(1.5415)
13CrMo4-5
160 160,0 160,0 160,0 160,0 160,0 159,2 152,3 144,7 137,1 117,4 104,3 87,9 71,6 59,4 46,4 37,3 30,4
(1,7335)
GP240GH
160 160,0 126,3 115,8 105,3 96,2 87,2 81,3 78,2 49,9 - - - - - - - -
(1.0619)
G20Mo5
160 160,0 132,7 123,4 114,3 106,7 99,2 93,3 90,2 87,2 65,5 51,1 - - - - - -
(1.5419)
G17CrMo5-5
160 160,0 160,0 160,0 150,4 144,3 138,4 129,4 120,3 114,3 88,3 70,4 63,0 55,4 48,0 - - -
(1.7357)
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;
• the valve must be protected from any mechanical damages during its work;
• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notification
PUBLISHED 01/2012 530R