Professional Documents
Culture Documents
ENGLISH
DEUTSCH
FRANÇAIS
MODEL: MCD104 (MCD104 -D0U/ MCS104F)
MCD204 (MCD204 -D0U/ MCS204F)
NEDERLANDS
SLOVENŠČINA
ITALIANO
ESPAÑOL
∂§§H¡π∫A
P/NO: MFL63266236
PORTUGUÊS
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 2
Safety Precaution
CAUTION concerning the Power Cord
CAUTION Most appliances recommend they be placed upon a dedicated circuit
RISK OF ELECTRIC SHOCK That is, a single outlet circuit which powers only that appliance and has no
DO NOT OPEN additional outlets or branch circuits. Check the specification page of this owner's manual
to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVIC- are dangerous. Any of these conditions could result in electric shock or fire. Periodically
ING TO QUALIFIED SERVICE PERSONNEL. examine the cord of your appliance, and if its appearance indicates damage or deterio-
This lightning flash with arrowhead symbol within an equilateral triangle is ration, unplug it, discontinue use of the appliance, and have the cord replaced with an
intended to alert the user to the presence of uninsulated dangerous voltage exact replacement part by an authorized service. Protect the power cord from physical
within the product’s enclosure that may be of sufficient magnitude to or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
constitute a risk of electric shock to persons. walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord
The exclamation point within an equilateral triangle is intended to alert exits the appliance. To disconnect power from the mains, pull out the mains cord plug.
the user to the presence of important operating and maintenance When installing the product, ensure that the plug is easily accessible.
(servicing) instructions in the literature accompanying the product. This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT Remove the old battery or battery pack, follow the steps in reverse order than the
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. assembly. To prevent contamination of the environment and bring on possible threat
WARNING: Do not install this equipment in a confined space such as a book case to human and animal health, the old battery or the battery put it in the appropriate
or similar unit. container at designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free
CAUTION: Do not block any ventilation openings. Install in accordance with the
reimbursement systems batteries and accumulators.
manufacturer's instructions.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings be never
Disposal of your old appliance
be blocked by placing the product on a bed, sofa, rug or other similar surface. This
product not be placed in a built-in installation such as a bookcase or rack unless 1. When this crossed-out wheeled bin symbol is attached to a product it
proper ventilation is provided or the manufacturer's instruction has been adhered to. means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
CAUTION: This product employs a Laser System. 4. For more detailed information about disposal of your old appliance,
To ensure proper use of this product, please read this owner’s manual carefully and please contact your city office, waste disposal service or the shop where
retain it for future reference. Shall the unit require maintenance, contact an you purchased the product.
authorized service center. Use of controls, adjustments or the performance of proce-
dures other than those specified herein may result in hazardous radiation exposure. This product is manufactured to comply with EMC Directive
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible 2004/108/EC and Low Voltage Directive 2006/95/EC.
laser radiation when open. DO NOT STARE INTO BEAM. European representative:
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and LG Electronics Service Europe B.V.
no objects filled with liquids, such as vases, shall be placed on the apparatus. Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
2
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 3
ENGLISH
Contents
Setting up 4
Main Unit 5
Remote control 6
Listening to CDs 7
Listening to music from your external device 7
Listening to the radio 8
Listening to the cassette tapes 8
Using an USB device 9
Enjoying a pre-programmed sound field 9
Recording to USB 10 The making of unauthorized copies of copy-protected
material, including computer programs, files, broadcasts and
Recording to TAPE 11
sound recordings, may be an infringement of copyrights and
Setting the Clock 11 constitute a criminal offense. This equipment should not be
used for such purposes.
Troubleshooting 12 Be responsible
Specifications 12 Respect copyrights
Before connecting, operating or adjusting this product, please read this instruction booklet carefully
and completely.
3
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 4
Setting up
3 (FM - aerial)
1
NOTES :
Be careful of the following • If TV screen becomes discolored do not place speakers
Be careful to make sure children not to put their hands or any objects into the within 30cm from TV.
*Speaker duct. • Be sure to match the speaker cord to the appropriate
*Speaker duct : A hole for plentiful bass sound on speaker cabinet(enclosure). terminal on the components : + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
4
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 5
Main Unit
˘
5
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 6
Remote control
POWER POWER on/ off SLEEP Fall asleep while listening to your unit .
Press SLEEP one or more times to select
Sound quality adjustment.
EQ delay time between 10 and 180 minutes.
You can choose sound impressions.
( Dimmer: Dim the display light )
* This button is not available. PROGRAM For storing radio stations
/MEMO If you have saved radio stations using
D.SKIP Select a desired CD
PROGRAM/MEMO, you can scroll through
them and select one.
PRESET/ Search for a folder of MP3/ WMA files Listens to your tracks in any order
FOLDER When a CD containing MP3/ WMA files in
several folders is being played, press INFO See information about your music.
PRESET/ FOLDER selects the folder you
want to play. z REC Recording (Recording to USB)
Choose a ‘preset number’ for a radio REPEAT Listen to your tracks repeatedly or ran-
RANDOM
6
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 7
8
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 9
9
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 10
10
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 11
5 “ON TIME” will be displayed. Then you can set the time you want the alarm
Recording to TAPE to go on. Press . bb/BB > to change the hours and minutes and
You can record a various sound source to TAPE. SET to save.
6 “OFF TIME” will be displayed. Then, you can set the time you want the
ON UNIT ON REMOTE function to stop. Press . bb/BB > to change the hours and minutes
1. Open the tape deck. x Z - and press SET to save.
2. Insert a blank tape and close the - 7 You will be shown the volume (VOL) you want to be woken by.
-
door. Use . bb/BB > to change the volume and SET to save.
3. Select a mode in which you want to (CD,TUNER, ...) FUNCTION The clock icon “ ” shows that the alarm is set.
record. 8 Press TIMER button 2times. You can check the setting status.
4. Play back a sound source first. B -
Notes:
5. Press zB - • If you set the clock time, you can check the time by pressing CLOCK even
Recording starts. when the player is turned off.
6. To stop recording, press xZ - • If you set the clock time and alarm, you can check the alarm icon “ ” by
pressing CLOCK even when the player is turned off.
11
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 12
Troubleshooting Specifications
Symptom Cause Correction General
General Power supply 200-240 V, 50/60 Hz
Power consumption MCD104: 30 W MCD204: 50 W
No power. The power cord is not plugged in. Plug in the power cord. Net Weight MCD104: 5 kg MCD204: 5.27 kg
Check the condition by operating other External dimensions (WxHxD) (272 x 338 x 358) mm
Check whether electricity failed.
electronic devices. Operating temperature 5 oC to 35 oC
Operating humidity 5 % to 85 %
No sound. Check whether you select right function. Press FUNCTION and check the select- Tuner
ed function. FM Tuning Range 87.5 to 108.0 MHz or
87.50 to 108.00 MHz
CD AM Tuning Range (optional) 522 to 1620 kHz or 520 to 1710 kHz
The unit does not An unplayable disc is inserted. Insert a playable disc. Amplifier
start playback. Output Power MCD104: 100 W MCD204: 200 W
The disc is dirty. Clean the disc.
T.H.D 0.50 %
Frequency Response 45 Hz to 20 kHz
RADIO Signal-to-noise ratio 70 dB
Radio stations The antenna is positioned or connected Connect the antenna securely. CD
cannot be tuned in. poorly. Frequency response 45 Hz to 20 kHz
Signal-to-noise ratio 70 dB
TAPE Dynamic range 70 dB
Unable to record. Record protect tabs are removed. Cover holes on back edge of tape with Cassette
tap. F.F/REW Time 120 sec (C-60)
Frequency Response 250 to 8000 Hz
Remote control Signal to Noise Ratio 40 dB
Channel Separation 35 dB (P/B)/ 45 dB (R/P)
The remote control The remote control is too far from the Operate the remote control within about Erase Ratio 50 dB (MTT-5511)
does not work unit. 23 ft (7 m). Speakers (MCS104F)
properly. There is an obstacle in the path of the Remove the obstacle. Type 2 Way 2 Speaker
remote control and the unit. Impedance 4Ω
Input Power 50 W
The battery in the remote control is Replace the battery with new one. Max. Input Power 100 W
exhausted. Net Dimensions (WxHxD) (220 x 338 x 228) mm
Net Weight (1EA) 2.28 kg
Speakers (MCS204F)
Type 2 Way 2 Speaker
Impedance 4Ω
Input Power 100 W
Max. Input Power 200 W
Net Dimensions (WxHxD) (220 x 338 x 243) mm
Net Weight (1EA) 3.06 kg
USB
Designs and specifications are subject to change without notice. Version 1.1
12 BUS power supply DC 5 V 500 mA