Comandos Actualizar IOS C1111

Router>enable
Router#sh usb0:
-#- --length-- ---------date/time--------- path
1 8192 Jan 01 1970 00:00:00.0000000000 +00:00 /vol/usb0/
2 8192 Jul 09 2019 00:47:26.0000000000 +00:00 /vol/usb0/System Volume
Information
Information/WPSettings.dat
Information/IndexerVolumeGuid
5 387843132 Nov 20 2019 11:39:24.0000000000 +00:00 /vol/usb0/c1100-
universalk9_ias.16.07.02.SPA.bin
15260000256 bytes available (387883008 bytes used)
Router#copy usb0:c1100-universalk9_ias.16.07.02.SPA.bin flash:

Destination filename [c1100-universalk9_ias.16.07.02.SPA.bin]?
Copy in
progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
387843132 bytes copied in 25.340 secs (15305570 bytes/sec)
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#boot system flash:c1100-universalk9_ias.16.07.02.SPA.bin
Router(config)#exit
Router#wr
Building configuration...
Router#reload

Comandos Actualizar IOS C1111

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Comandos Actualizar IOS C1111

Uploaded by

Copyright:

Available Formats

Router>enable

15260000256 bytes available (387883008 bytes used)

Router#copy usb0:c1100-universalk9_ias.16.07.02.SPA.bin flash:

Router(config)#boot system flash:c1100-universalk9_ias.16.07.02.SPA.bin

You might also like