Professional Documents
Culture Documents
March - April 2014 Employer: Bill Gates and Milinda Foundation Bangladesh
Position: Individual Consultant
March 2013 - June Employer: Water and Sanitation for Urban Poor Bangladesh
2013 (WSUP)
Position: Individual Consultant
01-28 February 2013 Employer: Mitsubishi Research Institute Inc., Japan Bangladesh
Position: Individual Consultant
April 2011 Employer: Practical Action and Water Aid Bangladesh Bangladesh
Position: Individual Consultant
Jan 1993- Aug 2002 Executive Engineer, Planning & Design, Dhaka City Bangladesh
Corporation
Tariq Bin Yousuf_ Solid Waste Management Expert
Presented two papers “Transforming Open Dump into Sanitary Landfill: A development Effort in
Waste Management” and “Municipal Solid Waste Management in Dhaka City” in the 3 rd Expert
Meeting on Solid Waste Management in Okayama, Japan (7-9 November 2007)
Participated in UN-ESCAP seminar on Green Growth in Busan, Korea on May 21-24 2008 and
presented paper solid waste management in Dhaka City.
Participated as resource speaker in the training program on solid waste management organized by
CITYNET-UNITAR at Kuala Lumpur, Malaysia 26-29th April 2010.
Presented a case study on Improvement of Solid Waste Management through a low carbon society at
Phuket, Thailand 25-27th August 2010.
Participated as Keynote speaker in 8th Expert Meeting of Society of Solid Waste Management Experts
in Asia and Pacific Islands (SWAPI) held in Tokyo, Japan 21-23 February 2011 and presented paper on
Waste recycling in Dhaka city: Role of waste pickers in informal economy.
Participated as resource speaker in the training program on solid waste management organized by
CITYNET- KLRTC at Kualalampur, Malaysia on 17th Oct 2011.
Participated in International Solid Waste Association (ISWA) congress and presented two papers
“Clean Dhaka Master Plan: An Experience of ODA in Municipal Solid Waste Management” and E-
Waste management in Bangladesh: Present Trend and Future Implication” on 19 th October 2011 in
Daegu,Korea.
Participated in C40 roundtable on Megacity’s Mayor:Taking Action on Climate Change RIO+20, at Rio
–deJanerio Brazil 17-22 June 2012
Presented paper in a CITYNET Seminar on Disaster Risk Reduction and Climate Change Adaptation in
Dhaka City Seminar at Surabaya, Indonesia, 8-14 July 2012
Participated in the 7th Asian Pacific Landfill Symposium (APLAS 2012) at Bali, Indonesia Oct 8-11 2012
as Invited Speaker and presented three papers (i) ‘3R Action Plan: A targeted waste management
solution for Bangladesh’ (ii) ‘Municipal Solid Waste Management in Bangladesh: Implementation of
Clean Dhaka Master Plan’ (iii) ‘Semi-aerobic landfill experience of Bangladesh’ and moderated a
session on Waste Biomass utilization and Waste Processing & Treatment.
Participated in Waste Safe Conference 2013 at Khulna 10-12 Feb’2013, Chaired session and
presented paper on 3R(Reduce, Reuse and Recycle) in Bangladesh-Paradigm shift from Waste
Management to Resource Management
Training:
Details Tasks Assigned on Consultant’s Reference to prior work/Assignment that best Illustrates
Team of Experts Capacity to Handle the Assigned Tasks
infrastructure and services and (b) new affordable and desirable sanitation facilities and services
(including faecal sludge management) in Ward 10 of Khulna City and provide recommendations for
institutional support for the long-term sustainability of services, as well as for replication and evolution
of the pilot to other wards.
Name of Assignment: Studying on present status of policy, planning & Practices and Future prospects
of waste management in Bangladesh.
Year: Oct-Dec 2015
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:
i) Review and asses the existing policy, planning and practices of solid waste management in
Bangladesh.
ii) Find pathway of effective waste management including safety and hygiene of waste workers
considering Disaster Risk Reduction and Climate Change Issues.
iii) Identify advocacy issues including addressing Disaster Risk Reduction and Climate Change issues on
waste management in Bangladesh.
iv) Disseminate the findings and share knowledge among policy makers and stakeholders.
Name of Assignment: Develop Modern Eco-friendly Abattoir (Slaughterhouse) operational manual
guideline.
Year: Oct-Dec 2015
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:
i) Develop of slaughterhouse operation & maintenance manual considering the Bangladesh
Slaughterhouse and meat control Act’2011 and guideline of DCC.
ii) Develop of slaughterhouse framework (institutional) in context of Bangladesh
iii) Develop of training module for capacity building of DNCC officials and meat occupational workers
Name of Assignment: An exploration of opportunities to utilize urban organic waste for the livelihood
improvement of farming.
Year: June-Sep 2015
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:
i) Analyze the organic waste policy contexts of Bangladesh
ii) Explore current practices in organic waste recycling and composting in rural and urban areas of
Bangladesh
Name of Assignment: Diagnostic Assessment ofWASH & HealthCare Waste ManagementIn District
Sadar Hospital, Cox’s Bazar.
Year: June-July 2015
Location: Bangladesh
Position Held: Individual Consultant
Activities performed: Assess environmental health scenario that includes waste management, water,
sanitation and hygiene in terms of the service availability and readiness in the hospital ii) Assess
occupational health and safety status of the related hospital staff and patients and caregivers iii)
Identify gaps of the environmental health in particular the HCWM and explore best possible solution to
reduce the risk of health care acquired infection.
Name of Assignment: Feasibility study Exploring Options for Sustainable Solid Waste Management
System in Mymensingh.
Year: April-June 2015
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:
i) Assess the existing practices and experiences of solid waste management activities in
Tariq Bin Yousuf_ Solid Waste Management Expert
Details Tasks Assigned on Consultant’s Reference to prior work/Assignment that best Illustrates
Team of Experts Capacity to Handle the Assigned Tasks
Mymensingh town;
ii) Understand the roles of the formal and informal sector in waste management, including recycling;
iii) Identify the key problematic issues in waste management including prioritization of the problems
for improvement target
iv) Understand the community priorities in waste management, particularly people living in low
incomes areas;
v) Assess workable options to improve solid waste management;
vi) Evaluate the current finances and cost recovery mechanisms in waste management;
vii) Identify ways and means of creating fund raising opportunities of solid waste management
programs;
viii) Recognize relevant issues to promote networks among stakeholders to address solid waste
management;
ix) Design an integrated and sustainable solid waste management system and conduct field test of
the proposed system
x) Carry out a gap analysis of the existing and proposed system and recommend possible
interventions considering the institutional, financial and social issues.
xi) Share and disseminate the findings among municipal authorities, policy makers and stakeholders
for implementation.
Name of Assignment: ADB TA 39295-032 BAN Preparing Urban Governance and Infrastructure
Improvement III
Year: July 2013-Oct 2014
Location: Bangladesh
Position Held: Solid Waste Management Engineer
Activities performed:
i) Prepare feasibility studies of waste management subprojects prioritized by priority pourashavas in
collaboration with other relevant specialists;
ii) viability for developing as regional disposal facilities explored;
iii) discuss the technical viability of various proposed options for each subproject, and demonstrate
that they are most cost efficient;
iv) undertake an institutional analysis and review O&M options (including outsourcing to a private
sector) and prepare an O&M strategy including technical procedures to ensure efficiency and
sustainability of the selected subprojects;
v) develop subproject selection criteria for the sector;
vi) work out a strategy for institutional arrangement for sustainable community-based solid waste
management in slum areas;
vii)take a profound look into the solid waste management aspects of UGIIP-I & II and synthesize
viewpoints around the adequacy and appropriateness of the measures taken under these projects;
and
viii) assess and recommend opportunities for developing Clean Development Mechanism (CDM)
projects in consultation with the international climate change expert.
Name of Assignment: Composting sector Analysis of Bangladesh.
Year: Sep 2014 (1 month)
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:
i) Overview of the composting sector (solid waste) and its core particularities,
ii) Overview of the compost market and its core particularities
iii) Case study analysis of few composting plants including detailed review of operations
Name of Assignment: Sanitation to do a detail analysis of Dhaka North City Corporation (DNCC)
policies, procedures, budget, roles and decision-making process related to Sanitation service delivery
and its present status in particular septage and fecal sludge management. Develop Draft Regulatory
and Institutional framework for Fecal Sludge Management.
Year: Mar-April 2014
Tariq Bin Yousuf_ Solid Waste Management Expert
Details Tasks Assigned on Consultant’s Reference to prior work/Assignment that best Illustrates
Team of Experts Capacity to Handle the Assigned Tasks
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:Detail analysis of policies, procedures and practices on sanitation and septage
management of DNCC and DWASA, review the policies and practices of the neighboring countries,
legislation and institutional analysis, budgetary provision, demand estimation of fecal sludge
management, roles and decision-making process, business plan for micro-enterprises and private
sector, Fecal sludge treatment and disposal process etc. Prepare Draft regulatory and institutional
framework and guideline for FSM in Bangladesh.
Name of Assignment: Study on Faecal Sludge Management Demand Estimation & Developing Effective
Management and Marketing Planning for Low Income Urban Residents.
Year: Mar-June 2013
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:Finding out potential entrepreneurs, business plan and implementation
framework and budgetary outline of On-site Sanitation System and Fecal Sludge Management (FSM).
Name of Assignment: Business opportunities in Waste Sector.
Year: Feb 2013 (1 month)
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:Collect basic information on waste management in Dhaka City including 3Rs,
Social and Environmental conditions.
Name of Assignment: Study on Review of the Operation and Maintenance and Mechanical
functionality of the MKII UN-HABITAT Vacutug Pit Latrine exhausting technology.
Year: July-Aug 2012
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:Review of sanitation situation in Bangladesh, institutional and regulatory
framework, consultation with different stakeholders, FSM service demand and supply situation
analysis, gap analysis, service delivery, income & expenditure, service management, review of the
different service delivery model, public health issues, technology options and improved operational
features, financial analysis, recommendation for a public-private partnership model for fecal sludge
management etc.
Name of Assignment: ADB: TA-7354 (BAN) Capacity Development of Urban Public and Environmental
Health.
Year: Jan-Nov 2012
Location: Bangladesh
Position Held: Solid Waste Management and CDM Expert
Activities performed:Prepare Action Plans in accordance with the National 3R (Reduce, Reuse and
Recycle) strategy (ii) Prepare Medical Waste Management Action Plans in accordance with the
Instruction issued by LGED.
Name of Assignment: Situation Analysis and Business Plan preparation on Faecal Sludge Management
of Faridpur Municipality.
Year: April 2011 (1 month)
Location: Bangladesh
Position Held: Individual Consultant
Activities performed:Develop a cost effective and functional sludge management (Collection,
transportation and treatment) system, develop a business plan for a long-term sustainable sludge
management service, build capacity on both technical and management of the service providers with
giving emphasis on skill development, health and safety issue, and income generation, raise awareness
of the customers, the service providers and the municipal policy makers on improvement of sludge
management services.
Name of Assignment: Situation Analysis and Business Plan preparation on Faecal Sludge Management
of Faridpur Municipality.
Tariq Bin Yousuf_ Solid Waste Management Expert
Details Tasks Assigned on Consultant’s Reference to prior work/Assignment that best Illustrates
Team of Experts Capacity to Handle the Assigned Tasks
Year: Feb-Apr 2010
Location: Bangladesh
Position Held: Solid Waste Management Expert
Activities performed:(i) Policy guideline for better SWM in Bangladesh (ii) Typical engineering design of
sanitary landfill (iii) Typical engineering design of small transfer station (iv) Working model of SWM
services to low-income communities (v) Working model of medical waste management (vi) Database of
SWM related information of six city corporations (vii) Institutional review of six city corporations (viii)
Needs assessment for capacity building (ix) Sample bid documents (x) Draft O&M and Occupational
Safety Plans (xi) Assessment report on potential for CDM application.
Name of Assignment: Landfill Improvement Project.
Year: Dec 2005-Dec 2010
Location: Bangladesh
Position Held: Solid Waste Management Expert
Activities performed:(i)Overall responsibility in executing two sanitary landfill projects transforming
open dump sites into sanitary landfills. The project consists of the components of leachate collection
and treatment facilities, gas venting system, daily waste compaction and covering, surface runoff
drainage facility, weigh-bridge operation and data-recording system, car wash facility etc. (ii) Conduct
IEE, EIA, SIA and EMP for sanitary landfill (iii) Routine monitoring of the environmental parameters (iv)
Capacity building of the Landfill Management Unit (LMU) (v) Occupational health and Safety training
for the landfill staff. (vi) Enhancing waste transport capacity, repair and maintenance, and
environmental awareness program.
Expert’s Contact Information: (Email: tariqbinyousuf@gmail.com, Phone: +8801817578326)
Tariq Bin Yousuf_ Solid Waste Management Expert
Certification:
I, Undersigned, certify that to the best of my knowledge and belief, this CV correctly describes myself, my
qualifications, and my experience, and I am available, as and when necessary, to undertake the
assignment in case of an award. I understand that any misstatement or misinterpretation described
herein may lead to my disqualification or dismissal by the client, and /or sanctions by the bank.