Professional Documents
Culture Documents
Incorporating
For over 10 years Kentec has offered its customers an unrivalled service when offering replacement parts. Our SRI
policy has been extended and improved and includes all products covered by our 3 year Product Warranty.
For the complete SRI Terms & Conditions please refer to our Web Site. For detailed warranty information, please
refer to Clause 8 of our Terms & Conditions of Sale. (See pages 54 & 55)
1. Obtain an RMA;
Call our sales department on +44 (0)1322 222121
E-mail: sales@kentec.co.uk
Visit our web site www.kentec.co.uk
2. Complete the RMA form and return it to Kentec for authorisation
3. We will check the RMA and where appropriate return it to you authorised
If we cannot accept the goods for return for any reason we will contact you directly to discuss this.
RMA Policy
1. Unfortunately we are no longer able to accept any returned products without a completed and
authorised RMA (Return Material Authority) document (see above).
2. We are unable to accept returned goods 6 months after the date of supply.
3. Restocking Charge
b. Special Products
i. Custom made or modified products that cannot be restocked are subject to a 60% return
charge as these products cannot be re-sold.
Free technical support is available on all Kentec products, by calling +44 (0)1322 222121 or by e-mail at
techsupport@kentec.co.uk.
When requesting technical assistance, it is essential that concise and detailed information is given to the technical
support staff, to allow them to provide an accurate response to the enquiry. For fault finding assistance, the
technical support staff may require additional testing to be performed to accurately diagnose possible causes of
the fault.
Whilst every effort is taken to ensure that the technical support information given is accurate, Kentec assume
no liability for any loss or damage as result of technical advise given, or time taken performing additional fault
diagnosis testing.
11. “Sigma CP” Conventional Fire Control Panels - Certified to EN54 parts 2 & 4
Panels
Product Description No. Wires No. Zones Enclosure Details (mm) Code Price
Surface 385W x 310H x 90D K11020 M2 £193-00
2 Zones
Flush 415W x 315H x 86D K11020 F2 £223-00
Surface 385W x 310H x 90D K11040 M2 £235-00
Four Wire 4 Zones
Flush 415W x 315H x 86D K11040 F2 £265-00
Surface 385W x 310H x 90D K11080 M2 £252-00
8 Zones
Sigma CP Flush 415W x 315H x 86D K11080 F2 £282-00
Conventional Fire Control Panels Surface 385W x 310H x 90D T11020 M2 £231-00
2 Zones
Example Flush 415W x 315H x 86D T11020 F2 £261-00
photograph Two Wire 4 Zones
Surface 385W x 310H x 90D T11040 M2 £289-00
Flush 415W x 315H x 86D T11040 F2 £309-00
Surface 385W x 310H x 90D T11080 M2 £299-50
8 Zones
Flush 415W x 315H x 86D T11080 F2 £329-50
Extras
Product Description Enclosure Details (mm) Code Price
Any relevant
extra items
Spares
Product Description Repair Cost (See page 4) Code Price
Any relevant 2 Zones B K444B £116-00
spare parts Four Wire 4 Zones C K445B £141-00
8 Zones C K446B £158-50
Sigma CP - Replacement Panel PCB
2 Zones C K447B £142-50
Two Wire 4 Zones C K448B £194-50
!
EW
Indicates PCB
repair cost
Additional Info
Hints & Tips
Product specific
information & tips
Logo Charges
The printing of your company logos (up to two colour print) onto control panels is a free of charge service pro-
vided to all Kentec clients.
A non recurring cost of £30-00 will be charged to produce silk screen artwork for new or modified logo designs.
To produce a new logo template we require artwork in electronic format in one of the following formats:
A. Adobe Illustrator .ai or .eps vector file with text converted to outlines (Preferred)
B. High resolution Tiff or JPEG file.
In either case please also state the two solid colours you require, preferably as a Pantone colour reference.
For further assistance please contact our Marketing Department on +44 (0)1322 222121.
Sigma CP/XT/XT+, Syncro & Syncro AS style enclosures are finished in light grey colour scheme:
The above colour scheme is finished in Polyester Powder Coat and is suitable for internal applications only (Except
where indicated). Finishes suitable for external use can be provided at extra cost.
Alternative colour schemes are also available on request and at additional cost.
We are able to offer Brushed or Polished Stainless Steel or Polished Brass finish to control panel doors*, please add
the following cost to the relevant control panel price.**
3D “Syncro” Analogue Addressable Fire Control Panels - 4 Loop Version - Argus Vega Protocol 17
3E “Syncro” Analogue Addressable Fire Control Panels - 2 Loop Version - Hochiki Protocol 18
3F “Syncro” Analogue Addressable Fire Control Panels - 4 Loop Version - Hochiki Protocol 19
3G. “Syncro” Analogue Addressable Fire Control Panels - 4 Loop Version - Larger Enclosure NEW! 20-21
3H “Syncro” Analogue Addressable Fire Control Panels - 6 & 8 Loop Versions - All Protocols 22
3J “Syncro” Analogue Addressable Fire Control Panels - Extras, Spares & Additional Info 23
4 “Syncro Response” Full Function Repeater Panel 24
5 “Syncro Matrix” Intelligent Fire Alarm Mimic Display Panel 25
6 “Syncro Ident” Programmable LED Indication Panels NEW! 26
7 “Syncro View” Local LCD Repeater Panels 27
8 “Syncro Focus & Focus+” Network LCD Repeater Panels 28
9 I/O Boards & Enclosures 29
10 “Syncro GUIDE V3” PC Graphics System 30
11 “Sigma CP” Conventional Fire Control Panels - Certified to EN54 parts 2 & 4 PRICE
REDUCTION 32
12 “Sigma CP-R” Fire Control Panel Repeaters 33
13 “Series 3000” Conventional Fire Control Panels 34
14 “Series 3200” Conventional Fire Alarm Repeater Panels 35
15 “Sigma” Economy Conventional Fire Control Panels 36
16 “Sigma Matrix” Conventional Fire Alarm Mimic Display System NEW! 37
17 Conventional Sounder Controller Units 38
Miscellaneous
Section Product Page
22 EN54-4 Approved Battery Chargers & Power Supplies NEW! 46
Miscellaneous
Panels
Product Description Protocol Printer Enable Key Enclosure Details (mm) Code
No Surface 385W x 310H x 90D LA81161 M2
Apollo N/A
Yes Surface 385W x 310H x 90D LA80161 M2
Syncro AS Lite - 1 Loop
Analogue Addressable No Surface 385W x 310H x 90D LV81161 M2
Fire Control Panel Argus Vega N/A
Yes Surface 385W x 310H x 90D LV80161 M2
(Non Networkable)
(No I/O Expansion Support) No Surface 385W x 310H x 90D LH81161 M2
Hochiki ESP N/A
Yes Surface 385W x 310H x 90D LH80161 M2
Surface 385W x 310H x 90D A81161 M2
No
Flush* 415W x 315H x 86D A81161 F2
Apollo N/A
Surface 385W x 310H x 90D A80161 M2
Yes
Flush* 415W x 315H x 86D A80161 F2
Surface 385W x 310H x 90D V81161 M2
No
Syncro AS - 1 Loop Flush* 415W x 315H x 86D V81161 F2
Analogue Addressable Argus Vega N/A
Fire Control Panel Surface 385W x 310H x 90D V80161 M2
Yes
Flush* 415W x 315H x 86D V80161 F2
Surface 385W x 310H x 90D H81161 M2
BS EN54-2
No
Flush* 415W x 315H x 86D H81161 F2
BS EN54-4 Hochiki ESP N/A
KM 73505 Surface 385W x 310H x 90D H80161 M2
Yes
Flush* 415W x 315H x 86D H80161 F2
No Surface 385W x 520H x 110D A81161 M3
No
Yes Surface 385W x 520H x 110D A80161 M3
Apollo
No Surface 385W x 520H x 110D A81161 M3P
Yes
Yes Surface 385W x 520H x 110D A80161 M3P
No Surface 385W x 520H x 110D V81161 M3
Syncro AS - 1 Loop No
Larger Enclosure (M3) Yes Surface 385W x 520H x 110D V80161 M3
Argus Vega
Analogue Addressable No Surface 385W x 520H x 110D V81161 M3P
Fire Control Panel Yes
Yes Surface 385W x 520H x 110D V80161 M3P
No Surface 385W x 520H x 110D H81161 M3
BS EN54-2 No
BS EN54-4 Yes Surface 385W x 520H x 110D H80161 M3
KM 73505 Hochiki ESP
No Surface 385W x 520H x 110D H81161 M3P
Yes
Yes Surface 385W x 520H x 110D H80161 M3P
* Sizes quoted are for the back box, the bezel extends a further 15mm all round.
Analogue
Panels
Product Description Protocol Printer Enable Key Enclosure Details (mm) Code
Surface 385W x 310H x 90D A81162 M2
No
Flush* 415W x 315H x 86D A81162 F2
Apollo N/A
Surface 385W x 310H x 90D A80162 M2
Yes
Flush* 415W x 315H x 86D A80162 F2
* Sizes quoted are for the back box, the bezel extends a further 15mm all round.
Extras
Product Description Code
Apollo Protocol K586A
Syncro AS Loop 2 Extension Card Argus Vega Protocol K586V
Hochiki ESP Protocol K586H
Syncro Fault Tolerant Network Interface Card K555
Syncro I/O - 16 Channel I/O board K560
Analogue
Spares
Product Description Code
Apollo K785LA
Syncro AS Lite Controller PCB Argus Vega K785LV
Hochiki ESP K785LH
Apollo K785A
Syncro AS Controller PCB Argus Vega K785V
Hochiki ESP K785H
Additional Info
Hints & Tips
Syncro AS Analogue Addressable control panels are fully compatible with existing Syncro systems:-
- Network
- Syncro I/O boards
- Syncro GUIDE Graphics Software Package
- Syncro Response
- Syncro Focus & Focus+
- Syncro View
Syncro AS has all the functionality of Syncro & can be configured using Loop Explorer Configuration Software.
Only Syncro AS panels in “M3” larger enclosures can have built in printers.
Syncro AS Lite is a stand-alone panel and as such will not connect to any other network devices or Syncro View panels.
Analogue
Panels
Product Description Protocol Printer Enable Key Enclosure Details (mm) Code
Surface 385W x 310H x 90D LTA80161M2
Apollo N/A Yes
Flush* 415W x 315H x 86D LTA80161F2
Syncro AS Listec - 1 Loop Surface 385W x 310H x 90D LTV80161M2
Analogue Addressable Argus Vega N/A Yes
Fire Control Panel Flush* 415W x 315H x 86D LTV80161F2
Surface 385W x 310H x 90D LTH80161M2
Hochiki ESP N/A Yes
Flush* 415W x 315H x 86D LTH80161F2
Surface 385W x 310H x 90D LTA80162M2
Apollo N/A Yes
Flush* 415W x 315H x 86D LTA80162F2
Syncro AS Listec - 2 Loop Surface 385W x 310H x 90D LTV80162M2
Analogue Addressable Argus Vega N/A Yes
Fire Control Panel Flush* 415W x 315H x 86D LTV80162F2
Surface 385W x 310H x 90D LTH80162M2
Hochiki ESP N/A Yes
Flush* 415W x 315H x 86D LTH80162F2
Syncro AS Listec - 1 Loop Apollo Yes Yes Surface 385W x 520H x 110D LTA80161M3P
Larger Enclosure (M3) Argus Vega Yes Yes Surface 385W x 520H x 110D LTV80161M3P
Analogue Addressable
Fire Control Panel Hochiki ESP Yes Yes Surface 385W x 520H x 110D LTH80161M3P
Syncro AS Listec - 2 Loop Apollo Yes Yes Surface 385W x 520H x 110D LTA80162M3P
Larger Enclosure (M3)
Analogue Addressable Argus Vega Yes Yes Surface 385W x 520H x 110D LTV80162M3P
Fire Control Panel Hochiki ESP Yes Yes Surface 385W x 520H x 110D LTH80162M3P
Extras
Spares
Product Description Code
Apollo K785LTA
Syncro AS Listec Controller PCB Argus Vega K785LTV
Hochiki ESP K785LTH
Panels
Product Description No. Zones Printer Enable Key Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENA63002 03
No
Flush 506W x 360H x 130D ENA63002 14
No
Surface 500W x 355H x 117D ENSA63002 03
Yes
Flush 506W x 360H x 130D ENSA63002 14
0 Zone LED’s
Surface 500W x 355H x 117D ENA63002 03P
No
Flush 506W x 360H x 130D ENA63002 14P
Yes
Surface 500W x 355H x 117D ENSA63002 03P
Yes
Flush 506W x 360H x 130D ENSA63002 14P
Surface 500W x 355H x 117D ENA63162 03
No
Flush 506W x 360H x 130D ENA63162 14
No
Surface 500W x 355H x 117D ENSA63162 03
Yes
Flush 506W x 360H x 130D ENSA63162 14
16 Zone LED’s
Surface 500W x 355H x 117D ENA63162 03P
No
Flush 506W x 360H x 130D ENA63162 14P
Yes
Surface 500W x 355H x 117D ENSA63162 03P
Syncro - 2 Loop Yes
Flush 506W x 360H x 130D ENSA63162 14P
Analogue Addressable
Control Panel Surface 500W x 355H x 117D ENA63482 03
No
Flush 506W x 360H x 130D ENA63482 14
No
Surface 500W x 355H x 117D ENSA63482 03
Yes
Flush 506W x 360H x 130D ENSA63482 14
48 Zone LED’s
Surface 500W x 355H x 117D ENA63482 03P
No
Flush 506W x 360H x 130D ENA63482 14P
Yes
Surface 500W x 355H x 117D ENSA63482 03P
Yes
Flush 506W x 360H x 130D ENSA63482 14P
Surface 500W x 355H x 117D ENA63962 03
Note: No
All Syncro panels with prefix Flush 506W x 360H x 130D ENA63962 14
No
‘EN’ are approved & certified
Surface 500W x 355H x 117D ENSA63962 03
to EN54 & carry the kitemark Yes
symbol below. Flush 506W x 360H x 130D ENSA63962 14
96 Zone LED’s
Surface 500W x 355H x 117D ENA63962 03P
BS EN54-2 No
BS EN54-4 Flush 506W x 360H x 130D ENA63962 14P
KM 73505 Yes
Surface 500W x 355H x 117D ENSA63962 03P
Yes
Flush 506W x 360H x 130D ENSA63962 14P
Analogue
Panels
Product Description No. Zones Printer Enable Key Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENA63004 03
No
Flush 506W x 360H x 130D ENA63004 14
No
Surface 500W x 355H x 117D ENSA63004 03
Yes
Flush 506W x 360H x 130D ENSA63004 14
0 Zone LED’s
Surface 500W x 355H x 117D ENA63004 03P
No
Flush 506W x 360H x 130D ENA63004 14P
Yes
Surface 500W x 355H x 117D ENSA63004 03P
Yes
Flush 506W x 360H x 130D ENSA63004 14P
Surface 500W x 355H x 117D ENA63164 03
No
Flush 506W x 360H x 130D ENA63164 14
No
Surface 500W x 355H x 117D ENSA63164 03
Yes
Flush 506W x 360H x 130D ENSA63164 14
16 Zone LED’s
Surface 500W x 355H x 117D ENA63164 03P
No
Flush 506W x 360H x 130D ENA63164 14P
Yes
Surface 500W x 355H x 117D ENSA63164 03P
Yes
Syncro - 4 Loop Flush 506W x 360H x 130D ENSA63164 14P
Analogue Addressable
Control Panel Surface 500W x 355H x 117D ENA63484 03
No
Flush 506W x 360H x 130D ENA63484 14
No
Surface 500W x 355H x 117D ENSA63484 03
Yes
Flush 506W x 360H x 130D ENSA63484 14
48 Zone LED’s
Surface 500W x 355H x 117D ENA63484 03P
No
Flush 506W x 360H x 130D ENA63484 14P
Yes
Surface 500W x 355H x 117D ENSA63484 03P
Yes
Flush 506W x 360H x 130D ENSA63484 14P
Surface 500W x 355H x 117D ENA63964 03
Note: No
All Syncro panels with prefix Flush 506W x 360H x 130D ENA63964 14
No
‘EN’ are approved & certified Surface 500W x 355H x 117D ENSA63964 03
to EN54 & carry the kitemark Yes
symbol below. Flush 506W x 360H x 130D ENSA63964 14
96 Zone LED’s
Surface 500W x 355H x 117D ENA63964 03P
BS EN54-2 No
BS EN54-4 Flush 506W x 360H x 130D ENA63964 14P
KM 73505 Yes
Surface 500W x 355H x 117D ENSA63964 03P
Yes
Flush 506W x 360H x 130D ENSA63964 14P
Panels
Product Description No. Zones Printer Enable Key Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENV63002 03
No
Flush 506W x 360H x 130D ENV63002 14
No
Surface 500W x 355H x 117D ENSV63002 03
Yes
Flush 506W x 360H x 130D ENSV63002 14
0 Zone LED’s
Surface 500W x 355H x 117D ENV63002 03P
No
Flush 506W x 360H x 130D ENV63002 14P
Yes
Surface 500W x 355H x 117D ENSV63002 03P
Yes
Flush 506W x 360H x 130D ENSV63002 14P
Surface 500W x 355H x 117D ENV63162 03
No
Flush 506W x 360H x 130D ENV63162 14
No
Surface 500W x 355H x 117D ENSV63162 03
Yes
Flush 506W x 360H x 130D ENSV63162 14
16 Zone LED’s
Surface 500W x 355H x 117D ENV63162 03P
No
Flush 506W x 360H x 130D ENV63162 14P
Yes
Surface 500W x 355H x 117D ENSV63162 03P
Yes
Syncro - 2 Loop Flush 506W x 360H x 130D ENSV63162 14P
Analogue Addressable
Control Panel Surface 500W x 355H x 117D ENV63482 03
No
Flush 506W x 360H x 130D ENV63482 14
No
Surface 500W x 355H x 117D ENSV63482 03
Yes
Flush 506W x 360H x 130D ENSV63482 14
48 Zone LED’s
Surface 500W x 355H x 117D ENV63482 03P
No
Flush 506W x 360H x 130D ENV63482 14P
Yes
Surface 500W x 355H x 117D ENSV63482 03P
Yes
Flush 506W x 360H x 130D ENSV63482 14P
Surface 500W x 355H x 117D ENV63962 03
Note: No
All Syncro panels with prefix Flush 506W x 360H x 130D ENV63962 14
No
‘EN’ are approved & certified Surface 500W x 355H x 117D ENSV63962 03
to EN54 & carry the kitemark Yes
symbol below. Flush 506W x 360H x 130D ENSV63962 14
96 Zone LED’s
Surface 500W x 355H x 117D ENV63962 03P
BS EN54-2 No
BS EN54-4 Flush 506W x 360H x 130D ENV63962 14P
KM 73505 Yes
Surface 500W x 355H x 117D ENSV63962 03P
Yes
Flush 506W x 360H x 130D ENSV63962 14P
Analogue
Panels
Product Description No. Zones Printer Enable Key Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENV63004 03
No
Flush 506W x 360H x 130D ENV63004 14
No
Surface 500W x 355H x 117D ENSV63004 03
Yes
Flush 506W x 360H x 130D ENSV63004 14
0 Zone LED’s
Surface 500W x 355H x 117D ENV63004 03P
No
Flush 506W x 360H x 130D ENV63004 14P
Yes
Surface 500W x 355H x 117D ENSV63004 03P
Yes
Flush 506W x 360H x 130D ENSV63004 14P
Surface 500W x 355H x 117D ENV63164 03
No
Flush 506W x 360H x 130D ENV63164 14
No
Surface 500W x 355H x 117D ENSV63164 03
Yes
Flush 506W x 360H x 130D ENSV63164 14
16 Zone LED’s
Surface 500W x 355H x 117D ENV63164 03P
No
Flush 506W x 360H x 130D ENV63164 14P
Yes
Surface 500W x 355H x 117D ENSV63164 03P
Yes
Syncro - 4 Loop Flush 506W x 360H x 130D ENSV63164 14P
Analogue Addressable
Control Panel Surface 500W x 355H x 117D ENV63484 03
No
Flush 506W x 360H x 130D ENV63484 14
No
Surface 500W x 355H x 117D ENSV63484 03
Yes
Flush 506W x 360H x 130D ENSV63484 14
48 Zone LED’s
Surface 500W x 355H x 117D ENV63484 03P
No
Flush 506W x 360H x 130D ENV63484 14P
Yes
Surface 500W x 355H x 117D ENSV63484 03P
Yes
Flush 506W x 360H x 130D ENSV63484 14P
Surface 500W x 355H x 117D ENV63964 03
Note: No
All Syncro panels with prefix Flush 506W x 360H x 130D ENV63964 14
No
‘EN’ are approved & certified
Surface 500W x 355H x 117D ENSV63964 03
to EN54 & carry the kitemark Yes
symbol below. Flush 506W x 360H x 130D ENSV63964 14
96 Zone LED’s
Surface 500W x 355H x 117D ENV63964 03P
BS EN54-2 No
BS EN54-4 Flush 506W x 360H x 130D ENV63964 14P
KM 73505 Yes
Surface 500W x 355H x 117D ENSV63964 03P
Yes
Flush 506W x 360H x 130D ENSV63964 14P
Panels
Product Description No. Zones Printer Enable Key Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENH63002 03
No
Flush 506W x 360H x 130D ENH63002 14
No
Surface 500W x 355H x 117D ENSH63002 03
Yes
Flush 506W x 360H x 130D ENSH63002 14
0 Zone LED’s
Surface 500W x 355H x 117D ENH63002 03P
No
Flush 506W x 360H x 130D ENH63002 14P
Yes
Surface 500W x 355H x 117D ENSH63002 03P
Yes
Flush 506W x 360H x 130D ENSH63002 14P
Surface 500W x 355H x 117D ENH63162 03
No
Flush 506W x 360H x 130D ENH63162 14
No
Surface 500W x 355H x 117D ENSH63162 03
Yes
Flush 506W x 360H x 130D ENSH63162 14
16 Zone LED’s
Surface 500W x 355H x 117D ENH63162 03P
No
Flush 506W x 360H x 130D ENH63162 14P
Yes
Surface 500W x 355H x 117D ENSH63162 03P
Yes
Syncro - 2 Loop Flush 506W x 360H x 130D ENSH63162 14P
Analogue Addressable
Control Panel Surface 500W x 355H x 117D ENH63482 03
No
Flush 506W x 360H x 130D ENH63482 14
No
Surface 500W x 355H x 117D ENSH63482 03
Yes
Flush 506W x 360H x 130D ENSH63482 14
48 Zone LED’s
Surface 500W x 355H x 117D ENH63482 03P
No
Flush 506W x 360H x 130D ENH63482 14P
Yes
Surface 500W x 355H x 117D ENSH63482 03P
Yes
Flush 506W x 360H x 130D ENSH63482 14P
Surface 500W x 355H x 117D ENH63962 03
Note: No
All Syncro panels with prefix Flush 506W x 360H x 130D ENH63962 14
No
‘EN’ are approved & certified Surface 500W x 355H x 117D ENSH63962 03
to EN54 & carry the kitemark Yes
symbol below. Flush 506W x 360H x 130D ENSH63962 14
96 Zone LED’s
Surface 500W x 355H x 117D ENH63962 03P
BS EN54-2 No
BS EN54-4 Flush 506W x 360H x 130D ENH63962 14P
KM 73505 Yes
Surface 500W x 355H x 117D ENSH63962 03P
Yes
Flush 506W x 360H x 130D ENSH63962 14P
Analogue
Panels
Product Description No. Zones Printer Enable Key Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENH63004 03
No
Flush 506W x 360H x 130D ENH63004 14
No
Surface 500W x 355H x 117D ENSH63004 03
Yes
Flush 506W x 360H x 130D ENSH63004 14
0 Zone LED’s
Surface 500W x 355H x 117D ENH63004 03P
No
Flush 506W x 360H x 130D ENH63004 14P
Yes
Surface 500W x 355H x 117D ENSH63004 03P
Yes
Flush 506W x 360H x 130D ENSH63004 14P
Surface 500W x 355H x 117D ENH63164 03
No
Flush 506W x 360H x 130D ENH63164 14
No
Surface 500W x 355H x 117D ENSH63164 03
Yes
Flush 506W x 360H x 130D ENSH63164 14
16 Zone LED’s
Surface 500W x 355H x 117D ENH63164 03P
No
Flush 506W x 360H x 130D ENH63164 14P
Yes
Surface 500W x 355H x 117D ENSH63164 03P
Yes
Syncro - 4 Loop Flush 506W x 360H x 130D ENSH63164 14P
Analogue Addressable
Control Panel Surface 500W x 355H x 117D ENH63484 03
No
Flush 506W x 360H x 130D ENH63484 14
No
Surface 500W x 355H x 117D ENSH63484 03
Yes
Flush 506W x 360H x 130D ENSH63484 14
48 Zone LED’s
Surface 500W x 355H x 117D ENH63484 03P
No
Flush 506W x 360H x 130D ENH63484 14P
Yes
Surface 500W x 355H x 117D ENSH63484 03P
Yes
Flush 506W x 360H x 130D ENSH63484 14P
Surface 500W x 355H x 117D ENH63964 03
Note: No
All Syncro panels with prefix Flush 506W x 360H x 130D ENH63964 14
No
‘EN’ are approved & certified Surface 500W x 355H x 117D ENSH63964 03
to EN54 & carry the kitemark Yes
symbol below. Flush 506W x 360H x 130D ENSH63964 14
96 Zone LED’s
Surface 500W x 355H x 117D ENH63964 03P
BS EN54-2 No
BS EN54-4 Flush 506W x 360H x 130D ENH63964 14P
KM 73505 Yes
Surface 500W x 355H x 117D ENSH63964 03P
Yes
Flush 506W x 360H x 130D ENSH63964 14P
Analogue
!
EW
N
Panels
Product Description Zones Protocol Printer Enable Key Enclosure Details (mm) Code
No Surface 500W x 460H x 190D ENA6300415
No
Yes Surface 500W x 460H x 190D ENSA6300415
Apollo
No Surface 500W x 460H x 190D ENA6300415P
Yes
Yes Surface 500W x 460H x 190D ENSA6300415P
No Surface 500W x 460H x 190D ENV6300415
No
Yes Surface 500W x 460H x 190D ENSV6300415
0 Zone Argus Vega
LED’s No Surface 500W x 460H x 190D ENV6300415P
Yes
Yes Surface 500W x 460H x 190D ENSV6300415P
No Surface 500W x 460H x 190D ENH6300415
No
Yes Surface 500W x 460H x 190D ENSH6300415
Hochiki ESP
No Surface 500W x 460H x 190D ENH6300415P
Yes
Syncro - 4 Loop Yes Surface 500W x 460H x 190D ENSH6300415P
Larger Enclosure
Analogue Addressable No Surface 500W x 460H x 190D ENA6316415
Fire Control Panel No
Yes Surface 500W x 460H x 190D ENSA6316415
Apollo
No Surface 500W x 460H x 190D ENA6316415P
Yes
Yes Surface 500W x 460H x 190D ENSA6316415P
No Surface 500W x 460H x 190D ENV6316415
No
Yes Surface 500W x 460H x 190D ENSV6316415
16 Zone Argus Vega
LED’s No Surface 500W x 460H x 190D ENV6316415P
Yes
Yes Surface 500W x 460H x 190D ENSV6316415P
No Surface 500W x 460H x 190D ENH6316415
No
Yes Surface 500W x 460H x 190D ENSH6316415
Hochiki ESP
No Surface 500W x 460H x 190D ENH6316415P
Yes
Yes Surface 500W x 460H x 190D ENSH6316415P
Panels
Product Description Zones Protocol Printer Enable Key Enclosure Details (mm) Code
No Surface 500W x 460H x 190D ENA6348415
No
Yes Surface 500W x 460H x 190D ENSA6348415
Apollo
No Surface 500W x 460H x 190D ENA6348415P
Yes
Yes Surface 500W x 460H x 190D ENSA6348415P
Analogue
No Surface 500W x 460H x 190D ENV6348415
No
Yes Surface 500W x 460H x 190D ENSV6348415
48 Zone Argus Vega
LED’s No Surface 500W x 460H x 190D ENV6348415P
Yes
Yes Surface 500W x 460H x 190D ENSV6348415P
No Surface 500W x 460H x 190D ENH6348415
No
Yes Surface 500W x 460H x 190D ENSH6348415
Hochiki ESP
No Surface 500W x 460H x 190D ENH6348415P
Yes
Syncro - 4 Loop Yes Surface 500W x 460H x 190D ENSH6348415P
Larger Enclosure
Analogue Addressable No Surface 500W x 460H x 190D ENA6396415
Fire Control Panel No
Yes Surface 500W x 460H x 190D ENSA6396415
Apollo
No Surface 500W x 460H x 190D ENA6396415P
Yes
Yes Surface 500W x 460H x 190D ENSA6396415P
Extras
Product Description Code
Flushing Collar (for 500W x 460H x 190D Cabinet) M272LGT
Additional Info
Hints & Tips
Syncro can support up to 500 LEDs, special panels can be made to order.
Analogue
Panels
Product Description Zones Protocol Printer Enable Key Enclosure Details (mm) Code
No Surface 500W x 650H x 137D ENA63966S4
No
Yes Surface 500W x 650H x 137D ENSA63966S4
Apollo
No Surface 500W x 650H x 137D ENA63966S4P
Yes
Yes Surface 500W x 650H x 137D ENSA63966S4P
No Surface 500W x 650H x 137D ENV63966S4
No
Syncro - 6 Loop* Yes Surface 500W x 650H x 137D ENSV63966S4
Analogue Addressable 96 Zone Argus Vega
Fire Control Panel LED’s No Surface 500W x 650H x 137D ENV63966S4P
Yes
Yes Surface 500W x 650H x 137D ENSV63966S4P
No Surface 500W x 650H x 137D ENH63966S4
No
Yes Surface 500W x 650H x 137D ENSH63966S4
Hochiki ESP
No Surface 500W x 650H x 137D ENH63966S4P
Yes
Yes Surface 500W x 650H x 137D ENSH63966S4P
Analogue
Thermal Printer Retrofit Kit K232SYN
Modem Module (PSTN) (allows remote access to Panel) K556P
Parallel Port B2158
Dongle (required to access modem)
USB Port B2158USB
Syncro I/O - 16 Channel I/O board K560
Syncro I/O - 8 Way Relay Extender Board K547
Syncro I/O - 6 Way Sounder Extender Board K546
Syncro I/O - 4 Way Conventional Detection Zone Module K545
MIOU - Multi Input/Output Unit (Din mount module) (Hochiki ESP only) K559
LIOU - Multi Input/Output Unit - Lite Version (Hochiki ESP only) K507
16 Zone Kit K553-16
Zone LED’s extender kit 48 Zone Kit K554-48
96 Zone Kit K554-96
Zones 1-16 K553
Zone LED Board c/w fixings
Zones 1-48 or 49-96 K554
Flushing Collar (for 500W x 650H x 117D Cabinet M925LGT
Spares
Product Description Code
Apollo or Hochiki protocol S548
Syncro Lite
Argus Vega protocol S548V
Main Display Processor Card
Apollo protocol S550ENA
Syncro
Hochiki protocol S550ENH
Argus Vega protocol S550ENV
Main Display Processor Card - Pre EN panels Apollo or Hochiki protocol S550
Apollo Protocol S549A
Syncro Lite Loop Controller Board Argus Vega Protocol S549V
Hochiki ESP Protocol S549H
Apollo Protocol S551A
Syncro Loop Controller Board Argus Vega Protocol S551V
Hochiki ESP Protocol S551H
Thermal Printer Paper Roll (57mm Wide Roll) B2869
4 Amp Switched Mode Power Supply - EN54-4 ENS400/S406*
2.5 Amp Switched Mode Power Supply (Syncro Lite only) S405
Additional Info
Hints & Tips
Important!
Each Syncro control panel that will be used on a network will require an S555 Network Card, please add to your order.
Syncro Response repeater panels come pre-fitted with Network Cards so it is NOT necessary to order for every Repeater on a Network.
Focus and Focus+ units also have Network Interface cards fitted.
Syncro View is NOT a Network device & connects directly to any Syncro Panel.
Syncro I/O modules are available with an enclosure, with or without power supply. (See page 29)
All Syncro panels have a built in RS485 Bus which supports Syncro I/O & Syncro View.
Due to the operational enhancements of the EN54 approved panels, these products are NOT compatible with “Non-EN54” panel networks.
* S406 will replace ENS400 when it becomes available. 3rd quarter of 2009.
Panels
Product Description No. Zones Printer Enclosure Details (mm) Code
Surface 500W x 355H x 117D ENK61000 03
No
0 Zone Flush 506W x 360H x 130D ENK61000 14
LEDs Surface 500W x 355H x 117D ENK61000 03P
Yes
Flush 506W x 360H x 130D ENK61000 14P
Surface 500W x 355H x 117D ENK61160 03
No
16 Zone Flush 506W x 360H x 130D ENK61160 14
LEDs Surface 500W x 355H x 117D ENK61160 03P
Yes
Flush 506W x 360H x 130D ENK61160 14P
Syncro Response
Full Function Repeater Surface 500W x 355H x 117D ENK61480 03
No
48 Zone Flush 506W x 360H x 130D ENK61480 14
LEDs Surface 500W x 355H x 117D ENK61480 03P
Yes
Flush 506W x 360H x 130D ENK61480 14P
Surface 500W x 355H x 117D ENK61960 03
No
96 Zone Flush 506W x 360H x 130D ENK61960 14
LEDs Surface 500W x 355H x 117D ENK61960 03P
Yes
Flush 506W x 360H x 130D ENK61960 14P
Extras
Product Description Code
Thermal Printer Retrofit Kit K232SYN
Syncro I/O - 16 Channel I/O board K560
Syncro I/O - 8 Way Relay Extender Board K547
Syncro I/O - 6 Way Sounder Extender Board K546
Syncro I/O - 4 Way Conventional Detection Zone Module K545
Spares
Product Description Code
Main Display Processor Card K550
Syncro Response Main Board K561
Syncro Fault Tolerant Network Interface Card K555
Zones 1-16 K553
Zone LED Board c/w fixings
Zones 1-48 or 49-96 K554
Thermal Printer Paper Roll (57mm Wide Roll) B2869
Analogue
Systems only
Panels
Product Description PSU Controls Enclosure Details (mm)
No Surface 385W x 310H x 90D
Not fitted
Yes Surface 385W x 310H x 90D
Syncro Matrix - M2 size, up to 24 LED’s
No Surface 385W x 310H x 90D
4.0 Amp
Yes Surface 385W x 310H x 90D
No Surface 500W x 355H x 117D
Not fitted
Yes Surface 500W x 355H x 117D
Syncro Matrix - ‘S3’ size, up to 56 LED’s For a product code
No Surface 500W x 355H x 117D
4.0 Amp contact our sales
Yes Surface 500W x 355H x 117D
department on
No +44 (0)1322 222121
Surface 385W x 520H x 110D
Not fitted
Yes Surface 385W x 520H x 110D
Syncro Matrix - ‘M3’ size, up to 56 LED’s
No Surface 385W x 520H x 110D
4.0 Amp
Yes Surface 385W x 520H x 110D
No Surface 500W x 650H x 137D
Not fitted
Yes Surface 500W x 650H x 137D
Syncro Matrix - ‘S4’ size, up to 88 LED’s
No Surface 500W x 650H x 137D
4.0 Amp
Yes Surface 500W x 650H x 137D
Extras
Product Description Code
Red K707
16 LED extension PCB Yellow K715
Green K716
Kit of 5 KFOC5
Fibre optic cable with light pipe - extension kit
Kit of 10 KFOC10
Fibre optic cutting tool B5712
Additional Info
Hints & Tips
Syncro Matrix can also be supplied in a bespoke size with up to 504 LED’s. Please contact our sales staff for a quotation.
Syncro Matrix can be connected to any Syncro and Syncro AS control panel. Syncro AS Lite is not compatible.
Panels
Product Description Number of LED’s Enclosure Details (mm) Code
8 LED’s Surface 385W x 310H x 60D K6508L2
Syncro Ident - Local LED Repeater
24 LED’s Surface 385W x 310H x 60D K6524L2
Spares
Product Description Code
Common Equipment PCB K744
Extension PCB K745
Additional Info
Hints & Tips
Analogue
Panels
Product Description PSU Enable Key Enclosure Details (mm) Code
Surface 330W x 255H x 90D K67000 M1
No
Semi Flush 330W x 255H x 90D K67000 F1
Not fitted
Surface 330W x 255H x 90D K67001 M1
Yes
Semi Flush 330W x 255H x 90D K67001 F1
Syncro View - Local LCD Repeater
Surface 330W x 255H x 90D K67750 M1
No
Semi Flush 330W x 255H x 90D K67750 F1
750mA
Surface 330W x 255H x 90D K67751 M1
Yes
Semi Flush 330W x 255H x 90D K67751 F1
Spares
Product Description Code
Syncro View Repeater Board K579
750mA Charger unit S307B
Additional Info
Hints & Tips
Note: “Syncro View” is NOT a Network device & connects directly to any Syncro, Syncro Response or Syncro AS panels. (Not Syncro AS Lite)
Up to 15 Syncro View repeaters may be connected to each Syncro or Syncro Response panel, taking up to 15 of the 32 addresses available for
the additional syncro expansion cards.
Panels
Product Description PSU Enclosure Details (mm) Code
Surface 330W x 255H x 90D K68000 M1
Not fitted
Syncro Focus - Semi Flush 330W x 255H x 90D K68000 F1
3 Button Version Surface 330W x 255H x 90D K69000 M1
750mA
Semi Flush 330W x 255H x 90D K69000 F1
Surface 330W x 255H x 90D K681000 M1
Not fitted
Syncro Focus+ - Semi Flush 330W x 255H x 90D K681000 F1
6 Button Version (Full Control) Surface 330W x 255H x 90D K691000 M1
750mA
Semi Flush 330W x 255H x 90D K691000 F1
Spares
Product Description Code
Syncro Focus/Focus+ Repeater Main Board K567A
750mA Charger unit S307B
Additional Info
Hints & Tips
Syncro Focus and Focus+ Repeater Panels DO NOT require a Network Card.
All Focus Repeaters must be connected to a Syncro Network.
They are NOT Protocol Specific.
Any panel supporting Syncro Focus must have an S555 Network Card fitted.
Product Data sheet: DS45 - I/O Box Data sheet (see website)
Enclosure: 1.2mm mild steel
Finish/Colour: Lid & Box - EPC (BS 00 A 05, mid grey fine texture)
Analogue
Panels
Product Description Enclosure Details (mm) Code
No PSU fitted Surface 385W x 310H x 90D K16001 M2
I/O box with chassis fitted:-
fits 3 I/O cards without PSU or, 750mA PSU fitted Surface 385W x 310H x 90D K16750 M2
fits 2 I/O cards with PSU fitted 2.5A PSU fitted* Surface 385W x 310H x 90D K16250 M2
(I/O modules not included, order separately)
4.0A PSU fitted** Surface 385W x 310H x 90D K16400 M2
Extras
Product Description Code
Syncro I/O - 16 Channel I/O board K560
Syncro I/O - 8 Way Relay Extender Board K547
Syncro I/O - 6 Way Sounder Extender Board K546
Syncro I/O - 4 Way Conventional Detection Zone Module K545
Additional Info
Hints & Tips
All Syncro panels, including Syncro Lite, Syncro AS & Syncro Response support Syncro I/O modules
Up to 32 modules (any combination) can be fitted to each Syncro panel
*This unit is currently fitted with an S405 Power Supply which will be phased out 3rd quarter of 2009 and replaced with an S407 PSU.
**This unit is currently fitted with an ENS400 which will be phased out 3rd quarter of 2009 and replaced with anS406 PSU.
Packages
Product Description Enclosure Details (mm) Code
Single Panel Package N/A G1001
4 Panel Package N/A G1004
Syncro GUIDE V3 8 Panel Package N/A G1008
PC Graphics Package
16 Panel Package N/A G1016
32 Panel Package N/A G1032
64 Panel Package N/A G1064
1 to 4 Panel Package N/A GU10104
1 to 8 Panel Package N/A GU10108
1 to 16 Panel Package N/A GU10116
1 to 32 Panel Package N/A GU10132
1 to 64 Panel Package N/A GU10164
4 to 8 Panel Package N/A GU10408
Extras
Product Description Enclosure Details (mm) Code
Syncro GUIDE V3 Repeater Single Repeater Package N/A GR2001
Providing Repeater Facility 4 Repeater Package N/A GR2004
for any GUIDE System 16 Repeater Package N/A GR2016
Syncro GUIDE V3 Repeater - Upgrade 1 to 4 Repeater Package N/A GRU20104
Repeater Upgrade Package 4 - 16 Repeater Package N/A GRU20116
Additional Info
Hints & Tips
All Syncro GUIDE Packages include Interface to PC & Syncro Panel Interface.
PC & Syncro Panel are NOT included in price.
N
U ICE
O
TI
ED PR
C
Panels
R
Product Description No. Wires No. Zones Enclosure Details (mm) Code
Surface 385W x 310H x 90D K11020 M2
2 Zones
Flush 415W x 315H x 86D K11020 F2
Surface 385W x 310H x 90D K11040 M2
Four Wire 4 Zones
Flush 415W x 315H x 86D K11040 F2
Surface 385W x 310H x 90D K11080 M2
8 Zones
Sigma CP Flush 415W x 315H x 86D K11080 F2
Conventional Fire Control Panels Surface 385W x 310H x 90D T11020 M2
2 Zones
Flush 415W x 315H x 86D T11020 F2
Surface 385W x 310H x 90D T11040 M2
Two Wire 4 Zones
Flush 415W x 315H x 86D T11040 F2
Surface 385W x 310H x 90D T11080 M2
8 Zones
Flush 415W x 315H x 86D T11080 F2
Conventional
Extras
Product Description Enclosure Details (mm) Code
Bezel for semi flushing panel to wall N/A M2FCLGT
LCMU Line Continuity Monitoring Unit N/A K14060
Sigma CP Ancillary PCB N/A K580
Boxed Sigma CP Ancillary PCB Surface 385W x 310H x 90D K02000 M2
Boxed Sigma CP Ancillary PCB with 0.75 Amp PSU Surface 385W x 310H x 90D K02750 M2
Sigma CP Sounder PCB N/A K461
Boxed Sigma CP Sounder PCB Surface 385W x 310H x 90D K04000 M2
Boxed Sigma CP Sounder PCB with 4 Amp PSU Surface 385W x 310H x 90D K04400 M2
Tamper Resistant Vision Window (easy to retrofit on site) N/A K18002
Spares
Product Description Code
2 Zones K444B
Four Wire 4 Zones K445B
8 Zones K446B
Sigma CP - Replacement Panel PCB
2 Zones K447B
Two Wire 4 Zones K448B
8 Zones K449B
Additional Info
Hints & Tips
All panels are supplied with end of line resistors fitted.
To comply with the requirements of BS5839 Part 1, one LCMU per zone is required when used with diode bases.
“Two Wire” panels require special detector bases such as Apollo 45682-206APO or Hochiki YBO-R/5PA.
Ancillary PCB’s connect to the control panel via a two wire Serial connection.
For Sigma 2 spares see Miscellaneous spares section at the back of the Price Guide.
Panels
Product Description PSU No. Zones Enclosure Details (mm) Code
Surface 385W x 310H x 60D E01020 L2
2 Zones
Flush 415W x 315H x 86D E01020 F2
Surface 385W x 310H x 60D E01040 L2
24V version 4 Zones
Flush 415W x 315H x 86D E01040 F2
Surface 385W x 310H x 60D E01080 L2
8 Zones
Sigma CP-R Flush 415W x 315H x 86D E01080 F2
Conventional Repeater Panel Surface 385W x 310H x 90D K01020 M2
2 Zones
Flush 415W x 315H x 86D K01020 F2
Surface 385W x 310H x 90D K01040 M2
230V version 4 Zones
Flush 415W x 315H x 86D K01040 F2
Conventional
Surface 385W x 310H x 90D K01080 M2
8 Zones
Flush 415W x 315H x 86D K01080 F2
Extras
Product Description Enclosure Details (mm) Code
Bezel for semi flushing panel to wall N/A M2FCLGT
Tamper Resistant Vision Window (easy to retrofit on site) N/A K18002
Spares
Product Description PSU No. Zones Code
2 Zones K581B
24V version 4 Zones K582B
Sigma CP-R 8 Zones K583B
Replacement Panel PCB 2 Zones K573B
230V version 4 Zones K574B
8 Zones K575B
Additional Info
Hints & Tips
Sigma CP-R are full function repeater panels.
Repeater panels connect to control panels via a two-wire Serial connection.
Panels with an “E” prefix require an additional two wires for 24V Power.
Panels with a “K” prefix require a 230V AC mains connection and have battery charging capability.
Panels
Product Description PSU No. Zones Enclosure Details (mm) Code
Surface 500W x 355H x 108D E30120 03
12 Zones
Flush 506W x 360H x 100D E30120 04
Surface 570W x 420H x 110D E30160 05
16 Zones
2.5 Amp Flush 576W x 426H x 108D E30160 06
(S405) Surface 570W x 420H x 110D E30240 05
24 Zones
Flush 576W x 426H x 108D E30240 06
Surface 600W x 700H x 140D E30320 07
32 Zones
Flush 606W x 706H x 115D E30320 08
Series 3000 Surface 570W x 420H x 110D K30160 05
16 Zones
Conventional Fire Control Panel Flush 576W x 426H x 108D K30160 06
Surface 570W x 420H x 110D K30240 05
24 Zones
Flush 576W x 426H x 108D K30240 06
4.0 Amp Surface 600W x 700H x 140D K30320 07
32 Zones
(ENS400/S406) Flush 606W x 706H x 115D K30320 08
Surface 600W x 700H x 140D K30400 07
40 Zones
Conventional
Extras
Product Description Code
SB04-4 4 Way Plug-in Sounder Card K256
SB04-2 2 Way Plug-in Sounder Card K260
LCMU Line Continuity Monitoring Unit K14060
Spares
Product Description Code
CON.05 Main 4 Zone Controller PCB K250S
Controller PCB 4 Zone Controller PCB (For panels of 16 Zones and upwards) K261S
K4ZMS - 4 Zone Extender PCB K251S
K8ZMS - 8 Zone Extender PCB K252S
2.5 Amp Charger unit (chassis only) S405
4.0 Amp Charger unit (chassis only) ENS400 / S406*
Additional Info
Hints & Tips
All panels are supplied with end of line resistors fitted. 6K8 on the Zones and 10K for the Sounders.
To comply with the requirements of BS5839 Part 1, one LCMU (K14060) per zone is required when used with Schottky diode bases.
K3000 are designed and manufactured to BS5839-4. They do not carry EN54-2/4 certification.
K3000 series conventional control panels have zonal volt free contacts as standard.
Additional sounder circuits can be provided by adding SB04 plug-in card.
Repeater panels are available for K3000 Series. (See page 35)
* S406 will replace ENS400 when it becomes available. 3rd quarter of 2009.
Panels
Product Description No. Zones Enclosure Details (mm) Code
Surface 365W x 290H x 88D K32120 01
12 Zones
Flush 370W x 295H x 100D K32120 02
Surface 365W x 290H x 88D K32160 01
16 Zones
Flush 370W x 295H x 100D K32160 02
Surface 365W x 290H x 88D K32240 01
24 Zones
Series K3200 Flush 370W x 295H x 100D K32240 02
Conventional Fire Alarm Repeater Panel
c/w Common Fault & Buzzer Resound Surface 500W x 355H x 108D K32320 03
32 Zones
Flush 506W x 360H x 100D K32320 04
Surface 570W x 420H x 110D K32400 05
40 Zones
Flush 576W x 426H x 108D K32400 06
Surface 570W x 420H x 110D K32480 05
Conventional
48 Zones
Flush 576W x 426H x 108D K32480 06
Spares
Product Description Code
Replacement for 12 Zone Repeater K262
Replacement Master PCB for 16 Zones and above K174
Replacement Slave PCB for 16 Zones and above K175
Additional Info
Hints & Tips
Repeat panels have zonal fire and common fault indication with buzzer mute and resound facility.
Connection from K3200 Repeater panels to K3000 panels required is number of zones +3.
Panels
Product Description PSU No. Zones Enclosure Details (mm) Code
750mA PSU 1 Zone Surface 315W x 235H x 84D E10010 00
1 Zone Surface 315W x 235H x 84D K10010 00
Sigma
Economy Conventional Fire Control Panel 2 Zones Surface 315W x 235H x 84D K10020 00
1.25A PSU
4 Zones Surface 315W x 235H x 84D K10040 00
6 Zones Surface 315W x 235H x 84D K10060 00
Extras
Product Description Enclosure Details (mm) Code
LCMU - Line Continuity Monitoring Unit N/A K14060
Conventional
Spares
Product Description Code
PS.07 Power Supply PCB (Sigma - 4 zone K1004000 and Sigma - 6 zone K1006000) S244
Sigma - 1 Zone Eco. (E1001000) S245
Sigma - 1 Zone (K1001000) S240
Sigma Sigma - 2 Zone (K1002000) S241
Replacement Main Control PCB
Sigma - 4 Zone (K1004000) S242
Sigma - 6 Zone (K1006000) S243
Additional Info
Hints & Tips
!
EW
N
Panels
Product Description PSU Controls Enclosure Details (mm)
No Surface 385W x 310H x 90D
Not fitted
Yes Surface 385W x 310H x 90D
Sigma Matrix - M2 size, up to 32 LED’s
No Surface 385W x 310H x 90D
4.0 Amp
Yes Surface 385W x 310H x 90D
No Surface 500W x 355H x 117D
Not fitted
Yes Surface 500W x 355H x 117D
Sigma Matrix - ‘S3’ size, up to 64 LED’s For a product code
No Surface 500W x 355H x 117D
Conventional
4.0 Amp contact our sales
Yes Surface 500W x 355H x 117D
department on
No +44 (0)1322 222121
Surface 385W x 520H x 110D
Not fitted
Yes Surface 385W x 520H x 110D
Sigma Matrix - ‘M3’ size, up to 64 LED’s
No Surface 385W x 520H x 110D
4.0 Amp
Yes Surface 385W x 520H x 110D
No Surface 500W x 650H x 137D
Not fitted
Yes Surface 500W x 650H x 137D
Sigma Matrix - ‘S4’ size, up to 96 LED’s
No Surface 500W x 650H x 137D
4.0 Amp
Yes Surface 500W x 650H x 137D
Extras
Product Description Code
All Red K742
32 LED extension PCB Red/ Yellow K750
All Green K751
Kit of 5 KFOC5
Fibre optic cable with light pipe - extension kit
Kit of 10 KFOC10
Fibre optic cutting tool B5712
Additional Info
Hints & Tips
Sigma Matrix can also be supplied in a bespoke size with up to 320 LED’s. Please contact our sales staff for a quotation.
Sigma Matrix can be configured to operate via switched positive or negative inputs providing compatibility with a wide range of input/
output boards.
Panels
Product Description Enclosure Details (mm) Code
2 Way (4.0A PSU) Surface 500W x 355H x 108D K17402 03
Conventional Sounder Control Unit 4 Way (4.0A PSU) Surface 500W x 355H x 108D K17404 03
6 Way (4.0A PSU) Surface 500W x 355H x 108D K17406 03
c/w Enclosure Surface 385W x 310H x 90D K04000 M2
Sigma CP Sounder PCB
c/w Enclosure & 4A PSU Surface 385W x 310H x 90D K04400 M2
Spares
Product Description Code
4.0 Amp EN54-54 Charger Unit (Chassis only) ENS400
2 Way Sounder Card S577
Conventional
Additional Info
Hints & Tips
Conventional sounder controllers provide additional sounder circuits or additional sounder circuit capacity for most conventional Fire
Detection Systems
Panels
Product Description Enclosure Details (mm) Code
Extras
Product Description Enclosure Details (mm) Code
Boxed Sigma XT Ancillary PCB Surface 385W x 310H x 90D K03000 M2
Boxed Sigma XT Ancillary PCB with 0.75 Amp PSU Surface 385W x 310H x 90D K03750 M2
Tamper Resistant Vision Window (easy to retrofit on site) N/A K18002
Spares
Product Description Code
Sigma XT Extinguishant control panel PCB K509
Sigma XT Extinguishant control panel PCB c/w plate (English Language Only) K11509
Sigma XT Ancillary PCB K588
Transformer B2761
Extinguishant
Additional Info
Hints & Tips
* Sizes quoted are for the back box, the bezel extends a further 15mm all round.
Sigma XT Extinguishant control panels have 3 detection zones, count down timer display & extract control facility as standard.
Sigma XT supports Sigma Si status indicators (up to 7 per panel) via a 4 core cable (data & power).
Sigma XT Extinguishant control panels have been tested & certified to EN12094-1.
Panels
Product Description Ext. Areas Enclosure Details (mm) Code
Sigma XT+ Extinguishant Coincidence unit 1 Area Surface 385W x 310H x 90D K21001 M2
Sigma XT+ 2 Zone - Extinguishant Control Panel 1 Area Surface 385W x 520H x 110D K21021 M3
Sigma XT+ 4 Zone 1 Area* Surface 385W x 520H x 110D K21041 M3
Extinguishant Control Panel 2 Area Surface 385W x 520H x 110D K21042 M3
1 Area* Surface 385W x 520H x 110D K21081 M3
Sigma XT+ 8 Zone 2 Area Surface 385W x 520H x 110D K21082 M3
Extinguishant Control Panel 3 Area* Surface 385W x 700H x 145D K21083 M4
4 Area Surface 385W x 700H x 145D K21084 M4
Extras
Product Description Code
Extinguishant module including PCB and plate (Can be retrofitted to upgrade system)* K700
385W x 310H (fits M2 box) M2FCLGT
Bezel for semi flushing panel to wall
385W x 520H (fits M3 box) M3FCLGT
LCMU Line Continuity Monitoring Unit K14060
Sigma CP Ancillary PCB K580
Sigma CP Sounder PCB K461
K588
Extinguishant
Sigma XT Ancillary PCB
Spares
Product Description Code
Coincidence Unit K597
Replacement Extinguishant PCB
Extinguishant Panel K700
2 Zones K444B
Sigma CP - Replacement Panel PCB Four Wire 4 Zones K445B
8 Zones K446B
Additional Info
Hints & Tips
Panels
Product Description Enclosure Details (mm) Code
Surface 186W x 132H x 50D K911000 M8
Standard
Flush 186W x 132H x 55D K911000 F8
Surface 186W x 132H x 50D K911100 M8
6 Lamps with Mode Select function
Sigma Si - Extinguishant Status Unit Flush 186W x 132H x 55D K911100 F8
with Manual Release Surface 186W x 132H x 50D K911010M8
function Flush 186W x 132H x 55D K911010F8
with Mode Select & Surface 186W x 132H x 50D K911110 M8
Manual Release function Flush 186W x 132H x 55D K911110 F8
with Mode Select & Surface 186W x 132H x 50D K911113 M8
10 Lamps* Manual Release function Flush 186W x 132H x 55D K911113 F8
6 Lamps with Mode Select function Surface 256W x 170H x 60D W911100 W8
Sigma Si - Weatherproof (IP65)
Extinguishant Status Unit with Mode Select &
Manual Release function
Surface 256W x 170H x 60D W911110 W8
with Mode Select &
10 Lamps* Surface 256W x 170H x 60D W911113 W8
Manual Release function
Green Button Surface 97W x 97H x 45D K91000 M10
Sigma Si - Extinguishant hold off switch unit
Red Button
White lid & box (BS7273) Surface 97W x 97H x 45D KB91000 M10
Extinguishant
Spares
Product Description Code
Sigma Si Extinguishant status unit PCB K569
Additional Info
Hints & Tips
“Sigma Si” status units can only be used with Sigma XT and Sigma XT+ control panels.
* “Sigma Si” 10 lamp version is not suitable for use with Sigma XT+ control panels.
“Sigma Si” flush mounting versions are now supplied with back boxes.
Model: W911113W8
Weatherproof Version (IP65)
Panels
Product Description Enclosure Details (mm) Code
Syncro XT - Surface 500W x 355H x 117D A651162 03
Analogue Addressable Extinguishant Control Panel Flush 506W x 360H x 130D A651162 14
Surface 186W x 132H x 50D A91000 M8
Standard
Flush 186W x 132H x 55D A91000 F8
Syncro Si - Surface 186W x 132H x 50D A91100 M8
with Manual Release function
Addressable Extinguishant Status Unit Flush 186W x 132H x 55D A91100 F8
with Manual Release & Surface 186W x 132H x 50D A91110 M8
Mode Select function Flush 186W x 132H x 55D A91110 F8
Standard Surface 256W x 170H x 60D A91000 W8
Syncro Si - Weatherproof (IP65) with Manual Release function Surface 256W x 170H x 60D A91100 W8
Addressable Extinguishant Status Unit
with Manual Release &
Surface 256W x 170H x 60D A91110 W8
Mode Select function
Syncro Si - Extinguishant hold off switch unit (White lid + box) Surface 97W x 97H x 45D A90001 M10
Spares
Product Description
Main Display Processor Card K548
Extinguishant Section Display Card K459
Extinguishant
Loop Controller Board - Apollo Protocol Only K549A
Extinguishant Status Board - Syncro Si K702
2.5 Amp Switched Mode Power Supply - EN54-4 S405
Additional Info
Hints & Tips
Syncro Si status and hold off units are addressable and can only be used with Syncro XT control panels.
Syncro Si status and hold off units are wired on the Syncro detection loop.
Syncro XT panels can be programmed with dedicated Syncro XT Software.
Is not certified to EN12094-1.
Pages 46-55
22. EN54-4 Approved Battery Chargers & Power Supplies
!
EW
Sigma CP style
N
Panels
Product Description PSU Battery Info Enclosure Details (mm) Code
2.5A N/A N/A S407
Charger Unit (Chassis Only)
5.25A ** N/A N/A S406
2.5A Max. 12A/H Battery Surface 500W x 355H x 108D K25250 03
Power Supply (Boxed) *
Max. 12A/H Battery Surface 500W x 355H x 108D K25400 03
To match Syncro Styling 5.25A **
Max. 26A/H Battery Surface 500W x 460H x 190D K25400 15
2.5A Max. 12A/H Battery Surface 385W x 520H x 110D K25250 M3
Power Supply (Boxed) *
To match Sigma CP/XT Styling 5.25A ** Max. 17.2A/H Battery Surface 385W x 520H x 110D K25400 M3
Additional Info
Photographs
* Kentec are introducing a new range of EN54-4 Power Supplies. These will be phased in 3rd quarter of 2009. In the interim, and while
stocks last our existing Power Supplies will be fitted.
** The existing PSU supplied in the interim basis is rated at 4A not 5.25A.
Sigma CP style
Panels
Product Description PSU Battery Info Enclosure Details (mm) Code
Charger Unit (PCB only) 750mA N/A N/A S307B
Charger Unit (Chassis only) 10.0A N/A N/A S299
Power Supply (Boxed) Max. 24A/H Battery Surface 500W x 355H x 145D K14100 11
10.0A
To match Syncro Styling Max. 38A/H Battery Surface 500W x 355H x 205D K14100 13
Power Supply (Boxed) 750mA Max. 7A/H Battery Surface 385W x 310H x 90D K14750 M2
To match Sigma CP/XT Styling 10.0A Max. 38A/H Battery Surface 385W x 520H x 200D K14100 D3
Additional Info
Photographs
Sigma CP style
Panels
Product Description Battery Info Enclosure Details (mm) Code
Max. 18A/H Battery Surface 500W x 355H x 108D K16202 03
Battery Box Max. 24A/H Battery Surface 500W x 355H x 145D K16199 11
To match Syncro Styling Max. 38A/H Battery Surface 500W x 355H x 205D K16303 13
Max. 65A/H Battery Surface 720W x 300H x 300D K16102 45
Max. 7A/H Battery Surface 385W x 310H x 90D K16100 M2
Battery Box Max. 18A/H Battery Surface 385W x 520H x 110D K16100 M3
To match Sigma CP/XT & Syncro AS Styling
Max. 38A/H Battery Surface 385W x 520H x 200D K16100 D3
2 A/h N/A K1700
2.8 A/h N/A K1710
7 A/h N/A K1715
Sealed Lead Acid Battery - 12 Volt
9 A/h N/A K1717
12 A/h N/A K1720
18 A/h N/A K1725
24 A/h N/A K1735
Additional Info
Photographs
Equipment
Product Description Enclosure Details (mm) Code
LCMU - Line Continuity Monitoring Unit N/A K14060
Tamper Resistant Vision Window (easy to retrofit on site) N/A K18002
Standard Version Surface 385W x 310H x 60D K16000 L2
Sigma Doc Box - Document Enclosure
Deep Version Surface 85W x 310H x 90D K16000 M2
3
Square N/A K14000
Detector Remote Indicator Unit
(Printed “Fire Detector Activated”) Square (Stainless Steel) N/A K14050
Round N/A K14010
For other colours or finishes please contact our sales Surface 500W x 355H x 200D M303LGT
department on +44 (0)1322 222121. Flush 506W x 360H x 100D M206LGT
Flush 506W x 360H x 130D M210LGT
Surface 570W x 420H x 110D M160LGT
Flush 576W x 426H x 108D M161LGT
Surface 600W x 700H x 140D M180LGT
Flush 606W x 706H x 115D M183LGT
Surface 700W x 1000H x 145D M220LGT
Flush 706W x 1006H x 145D M226LGT
Please contact our sales department who will be able to help you with
your requirements.
Fast Quotations
Geographical floor plan with LED indicactions
Expert design advice
Mechanical engineering design
Artwork and printing design
Documentation
Electrical engineering
Electronic engineering
Sheet metal fabrication
Powder coat finishing
Metal finishing
Plant control unit in 19” rack enclosure
Silk screen printing
Wire looming
Electrical safety testing
Technical support
Smoke Damper
Control Panels
Analogue/Addressable
Interface Units (with or
without integral PSU)
Miscellaneous
“SELLER” means KENTEC ELECTRONICS LIMITED (registered in England under 4.5 The cost of pallets and returnable containers will be charged to the Buyer in
number 1937570) of 25 Dartford Trade Park Dartford Kent DA1 1JQ; addition to the price of the Goods, but full credit will be given to the Buyer provided
they are returned undamaged to the Seller before the due payment date.
“CONDITIONS” means the standard terms of sale set out in this document and
(unless the context otherwise requires) includes any special terms agreed in Writing 5. TERMS OF PAYMENT
between the Buyer and the Seller;
5.1 Subject to any special terms agreed in Writing between the Buyer and the
“CONTRACT” means the contract for the sale and purchase of the Goods; Seller, the Seller may invoice the Buyer for the price of the Goods on or at any time
after delivery of the Goods, unless the Goods are to be collected by the Buyer or
“WRITING”, and any similar expression, includes facsimile transmission but not the Buyer wrongfully fails to take delivery of the Goods, in which event the Seller
electronic mail or other forms of electronic communication. shall be entitled to invoice the Buyer for the price at any time after the Seller has
notified the Buyer that the Goods are ready for collection or (as the case may be)
1.2 Any reference in these Conditions to a provision of a statute shall be construed the Seller has tendered delivery of the Goods.
as a reference to that provision as amended, re‑enacted or extended at the rel-
evant time. 5.2 The Buyer shall pay the price of the Goods within 30 days of the date of the
Seller’s invoice, notwithstanding that delivery may not have taken place and the
1.3 The headings in these Conditions are for convenience only and shall not affect property in the Goods has not passed to the Buyer. The time of payment of the
their interpretation. price shall be of the essence of the Contract. Receipts for payment will be issued
only upon request.
2. BASIS OF SALE
2.1 The Seller shall sell and the Buyer shall purchase the Goods in accordance with 5.3 If the Buyer fails to make any payment on the due date then, without prejudice
the Seller’s Written quotation (if accepted by the Buyer), or the Buyer’s Written to any other right or remedy available to the Seller, the Seller shall be entitled to:
order (if accepted by the Seller), subject in either case to these Conditions which
5.3.1 Cancel the contract or suspend any further deliveries to the Buyer;
shall govern the Contract to the exclusion of any other terms subject to which any
such quotation is accepted or purported to be accepted, or any such order is made 5.3.2 Appropriate any payment made by the Buyer to such of the Goods (or the
or purported to be made, by the Buyer. Goods supplied under any other contract between the Buyer and the Seller) as the
2.2 No variation to these Conditions shall be binding unless agreed in Writing Seller may think fit (notwithstanding any purported appropriation by the Buyer);
between the authorised representatives of the Buyer and the Seller.
5.3.3 Charge the Buyer interest (both before and after any judgment) on the
2.3 The Seller’s employees or agents are not authorised to make any representa- amount unpaid, at the rate of four per cent per annum above Lloyds Bank PLC
tions concerning the Goods unless confirmed by the Seller in Writing. In entering base rate from time to time, until payment in full is made (a part of a month being
into the Contract the Buyer acknowledges that it does not rely on, and waives any treated as a full month for the purpose of calculating interest).
claim for breach of, any such representations which are not so confirmed, but noth-
ing in these Conditions affects the liability of either party for fraudulent misrepre- 6. DELIVERY
sentation.
6.1 Delivery of the Goods shall be made by the Buyer collecting the Goods at the
2.4 Any advice or recommendation given by the Seller or its employees or agents Seller’s premises at any time after the Seller has notified the Buyer that the Goods
to the Buyer or its employees or agents as to the storage, application or use of are ready for collection or, if some other place for delivery is agreed by the Seller,
the Goods which is not confirmed in Writing by the Seller is followed or acted upon by the Seller delivering the Goods to that place.
entirely at the Buyer’s own risk, and accordingly the Seller shall not be liable for
any such advice or recommendation which is not so confirmed. 6.2 Any dates quoted for delivery of the Goods are approximate only and the Seller
shall not be liable for any delay in delivery of the Goods however caused. Time for
2.5 Any typographical, clerical or other error or omission in any sales literature, delivery shall not be of the essence of the Contract unless previously agreed by
quotation, price list, acceptance of offer, invoice or other document or information the Seller in Writing. The Goods may be delivered by the Seller in advance of the
issued by the Seller shall be subject to correction without any liability on the part quoted delivery date on giving reasonable notice to the Buyer.
of the Seller.
6.3 Where the Goods are to be delivered in instalments, each delivery shall
3. ORDERS AND SPECIFICATIONS constitute a separate contract and failure by the Seller to deliver any one or more
of the instalments in accordance with these Conditions or any claim by the Buyer
3.1 No order submitted by the Buyer shall be deemed to be accepted by the Seller in respect of any one or more instalments shall not entitle the Buyer to treat the
unless and until confirmed in Writing by the Seller’s authorised representative. Contract as a whole as repudiated.
3.2 The Buyer shall be responsible to the Seller for ensuring the accuracy of the 6.4 If the Seller fails to deliver the Goods (or any instalment) for any reason other
terms of any order (including any applicable specification) submitted by the Buyer, than any cause beyond the Seller’s reasonable control or the Buyer’s fault, and the
and for giving the Seller any necessary information relating to the Goods within a Seller is accordingly liable to the Buyer, the Seller’s liability shall be limited to the
sufficient time to enable the Seller to perform the Contract in accordance with its excess (if any) of the cost to the Buyer (in the cheapest available market) of similar
terms. goods to replace those not delivered over the price of the Goods.
3.3 The quantity, quality and description of the Goods and any specification for 6.5 If the Buyer fails to take delivery of the Goods or fails to give the Seller
them shall be as set out in the Seller’s quotation (if accepted by the Buyer) or the
adequate delivery instructions at the time stated for delivery (otherwise than by
Buyer’s order (if accepted by the Seller).
reason of any cause beyond the Buyer’s reasonable control or by reason of the Sell-
3.4 If the Goods are to be manufactured or any process is to be applied to the er’s fault) then, without limiting any other right or remedy available to the Seller,
Goods by the Seller in accordance with a specification submitted by the Buyer, the the Seller may:
Buyer shall indemnify the Seller against all loss, damages, costs and expenses
6.5.1 Store the Goods until actual delivery and charge the Buyer for the reasonable
awarded against or incurred by the Seller in connection with, or paid or agreed to
be paid by the Seller in settlement of, any claim for infringement of any patent, costs (including insurance) of storage; or
copyright, design, trade mark or other industrial or intellectual property rights of
6.5.2 Sell the Goods at the best price readily obtainable and (after deducting all
any other person which results from the Seller’s use of the Buyer’s specification.
reasonable storage and selling expenses) account to the Buyer for the excess over
3.5 The Seller reserves the right to make any changes in the specification of the the price under the Contract or charge the Buyer for any shortfall below the price
Goods which are required to conform with any applicable statutory requirements under the Contract.
or, where the Goods are to be supplied to the Seller’s specification, which do not
materially affect their quality or performance.
3.6 No order which has been accepted by the Seller may be cancelled by the Buyer 7. RISK AND PROPERTY
except with the agreement in Writing of the Seller and on terms that the Buyer shall
7.1 Risk of damage to or loss of the Goods shall pass to the Buyer:
indemnify the Seller in full against all loss (including loss of profit), costs (including
the cost of all labour and materials used), damages, charges and expenses incurred 7.1.1 In the case of Goods to be delivered at the Seller’s premises, at the time
by the Seller as a result of cancellation.
when the Seller notifies the Buyer that the Goods are available for collection; or
Miscellaneous
8.2.2 The Seller shall be under no liability in respect of any defect arising from fair 10. INSOLVENCY OF THE BUYER
wear and tear, wilful damage, negligence, abnormal working conditions, failure to
10.1 This clause 10 applies if:
follow the Seller’s instructions (whether oral or in writing), misuse or alteration or
repair of the Goods without the Seller’s approval; 10.1.1 The Buyer makes a composition or voluntary arrangement with its creditors
or (being an individual or firm) becomes bankrupt or (being a company) enters
8.2.3 The Seller shall be under no liability under the above warranty (or any other
administration or goes into liquidation (otherwise than for the purposes of amalga-
warranty, condition or guarantee) if the total price for the Goods has not been paid
mation or reconstruction), or a moratorium comes into force in respect of the Buyer
by the due date for payment;
(within the meaning of the Insolvency Act 1986); or
8.2.4 The above warranty does not extend to parts, materials or equipment not
10.1.2 An encumbrancer takes possession, or a receiver is appointed, of any of the
manufactured by the Seller, in respect of which the Buyer shall only be entitled to
property or assets of the Buyer; or
the benefit of any such warranty or guarantee as is given by the manufacturer to
the Seller.
10.1.3 The Buyer ceases, or threatens to cease, to carry on business; or
8.2.5 The Buyer complying in all material respects with these Conditions.
10.1.4 The Seller reasonably apprehends that any of the events mentioned above is
8.3 Subject as expressly provided in these conditions, and except where the Goods about to occur in relation to the Buyer and notifies the Buyer accordingly.
are sold to a person dealing as a consumer (within the meaning of the Unfair Con-
10.2 If this clause applies then, without limiting any other right or remedy available
tract Terms Act 1977), all warranties, conditions or other terms implied by statute
to the Seller, the Seller may cancel the Contract or suspend any further deliveries
or common law are excluded to the fullest extent permitted by law.
under the Contract without any liability to the Buyer, and if the Goods have been
8.4 Where the Goods are sold under a consumer transaction (as defined by the delivered but not paid for the price shall become immediately due and payable
Sale of Goods Act 1979) the statutory rights of the Buyer are not affected by these notwithstanding any previous agreement or arrangement to the contrary.
Conditions.
11. EXPORT TERMS
8.5 A claim by the Buyer which is based on any defect in the quality or condition
of the Goods or their failure to correspond with specification shall (whether or not 11.1 In this clause 11 “Incoterms” means the International Rules for the Interpreta-
delivery is refused by the Buyer) be notified to the Seller within seven days from tion of Trade Terms of the International Chamber of Commerce as in force at the
the date of delivery or (where the defect or failure was not apparent on reason- date when the Contract is made. Unless the context otherwise requires, any term
able inspection) within a reasonable time after discovery of the defect or failure. or expression which is defined in or given a particular meaning by the provisions of
If delivery is not refused, and the Buyer does not notify the Seller accordingly, the Incoterms shall have the same meaning in these Terms, but if there is any conflict
Buyer shall not be entitled to reject the Goods and the Seller shall have no liability between the provisions of Incoterms and these Conditions, the latter shall prevail.
for such defect or failure, and the Buyer shall be bound to pay the price as if the
11.2 Where the Goods are supplied for export from the United Kingdom, the provi-
Goods had been delivered in accordance with the Contract.
sions of this clause 11 shall (subject to any special terms agreed in Writing between
8.6 Where a valid claim in respect of any of the Goods which is based on a defect in the Buyer and the Seller) apply notwithstanding any other provision of these Condi-
the quality or condition of the Goods or their failure to meet specification is notified tions.
to the Seller in accordance with these Conditions, the Seller may replace the Goods
(or the part in question) free of charge or, at the Seller’s sole discretion, refund to 11.3 The Buyer shall be responsible for complying with any legislation or regula-
the Buyer the price of the Goods (or a proportionate part of the price), in which tions governing the importation of the Goods into the country of destination and for
case the Seller shall have no further liability to the Buyer. the payment of any duties on them.
8.7 Except in respect of death or personal injury caused by the Seller’s negligence, 11.4 Unless otherwise agreed in Writing between the Buyer and the Seller, the
or liability for defective products under the Consumer Protection Act 1987, the Goods shall be delivered fob the air or sea port of shipment and the Seller shall
Seller shall not be liable to the Buyer by reason of any representation (unless fraud- be under no obligation to give notice under section 32(3) of the Sale of Goods Act
ulent), or any implied warranty, condition or other term, or any duty at common 1979.
law, or under the express terms of the Contract, for loss of profit or for any
indirect, special or consequential loss or damage, costs, expenses or other claims 11.5 The Buyer shall be responsible for arranging for testing and inspection of the
for compensation whatsoever (whether caused by the negligence of the Seller, its Goods at the Seller’s premises before shipment. The Seller shall have no liability for
employees or agents or otherwise) which arise out of or in connection with the any claim in respect of any defect in the Goods which would be apparent on inspec-
supply of the Goods (including any delay in supplying or any failure to supply the tion and which is made after shipment, or in respect of any damage during transit.
Goods in accordance with the Contract or at all) or their use or resale by the Buyer
11.6 Unless otherwise required by the Seller, payment of all amounts due to the
and the entire liability of the Seller under or in connection with the Contract shall
Seller shall be made by irrevocable letter of credit, in a form acceptable to the
not exceed the price of the Goods, except as expressly provided in these conditions.
Seller, to be opened by the Buyer in favour of the Seller and confirmed by a bank
8.8 The Seller shall not be liable to the Buyer or be deemed to be in breach of the in the United Kingdom acceptable to the Seller within 14 days after the Contract is
Contract by reason of any delay in performing, or any failure to perform, any of the concluded.
Seller’s obligations in relation to the Goods, if the delay or failure was due to any
cause beyond the Seller’s reasonable control. Without limiting the foregoing, the 11.7 The Buyer shall not offer the Goods for resale in any other country notified by
following shall be regarded as causes beyond the Seller’s reasonable control: the Seller to the Buyer at or before the time the Buyer’s order is placed, or sell the
Goods to any person if the Buyer knows or has reason to believe that that person
8.8.1 Act of God, explosion, flood, tempest, fire or accident; intends to resell the Goods in any such country.
8.8.2 War or threat of war, sabotage, insurrection, civil disturbance or requisition; 12. GENERAL
8.8.3 Acts, restrictions, regulations, bye‑laws, prohibitions or measures of any kind 12.1 Any notice required or permitted to be given by either party to the other under
on the part of any governmental, parliamentary or local authority; these Conditions shall be in Writing addressed to that other party at its registered
office or principal place of business or such other address as may at the relevant
8.8.4 Import or export regulations or embargoes; time have been notified pursuant to this provision to the party giving the notice.
8.8.5 Strikes, lock‑outs or other industrial actions or trade disputes (whether 12.2 No waiver by the Seller of any breach of the Contract by the Buyer shall be
involving employees of the Seller or of a third party); considered as a waiver of any subsequent breach of the same or any other provi-
sion.
8.8.6 Difficulties in obtaining raw materials, labour, fuel, parts or machinery;
Miscellaneous
12.3 The Buyer shall not assign the whole or any part of its rights or obligations
8.8.7 Power failure or breakdown in machinery. under these Conditions.
9.INDEMNITY 12.4 Nothing in these Conditions shall give nor is intended to give rights to any
third party under the Contract (Rights of Third Parties) Act 1999 or otherwise.
9.1 If a claim is made against the Buyer that the Goods infringe or that their use
or resale infringes the patent, copyright, design, trade mark or other industrial or 12.5 If any provision of the Contract is held by a court or other competent authority
intellectual property rights of any other person, then unless the claim arises from to be invalid or unenforceable in whole or in part the validity of the other provisions
the use of a drawing, design or specification supplied by the Buyer, the Seller shall of these Conditions and the remainder of the provision in question shall not be
indemnify the Buyer against all loss, damages, costs and expenses awarded against affected thereby.
or incurred by the Buyer in connection with the claim, or paid or agreed to be paid
by the Buyer in settlement of the claim, provided that: 12.6 Any dispute arising under these Conditions or the sale of the Goods shall be
referred to arbitration by a single arbitrator appointed by agreement or (in default)
9.1.1 The Seller is given full control of any proceedings or negotiations in connec- nominated at the application of either party by the President for the time being of
tion with the claim; The Law Society, in accordance with the rules of The Arbitration Acts 1996.
9.1.2 The Buyer shall give the Seller all reasonable assistance for the purposes of 12.7 The Contract shall be governed by the laws of England, and the Buyer agrees
any such proceedings or negotiations; to submit to the non‑exclusive jurisdiction of the English courts.
TM TM
BSI BSI
By Appointment to
Certificate No. FM 32987 Certificate No. EMS 518118 Certificate No. 360 KM 73505 Her Majesty The Queen