Professional Documents
Culture Documents
ON
PLASTIC ROADS
A report submitted for the partial fulfillment for the award of
By
Under Guidance of
Date:
Place: ZOOM app
Prof. A. K. Pimple Prof. S. M. Pawar
Project Guide Head Department of Civil
Engineering
Examiners:
Sl.
No.
Name Signature
1.
2.
ACKNOWLEDGEMENT
I would like to express my sincere gratitude and regards to my
seminar supervisor, Prof. Pimple Amrita, Professor, Department of
Civil Engineering, NIE for his consistent support and guidance. I
would also like to take this opportunity to thank Prof. S. M. Pawar
Professor and Head, Department of Civil Engineering. I also thank all
the Faculties of Civil Engineering Department and my batch mates for
their support and coordination.
ABSTRACT
Roads are the Primary and basic means of transport which
play a vital role in a country’s
economy. In a country like India which has the 2nd largest
road network, construction of
durable, strong, tough and long lasting roads is certainly
necessary.
Plastic being one of the revolutionary invention of humans a
century ago is now one of the biggest hindrance for the
mankind. Enough plastic is thrown every year to circle earth
four times. Around 8 million tons of plastic is thrown into our
oceans every year killing innumerous aquatic organisms.
Many Environmentalists, researchers, scientists and common
people are working towards plastic waste management. Using
recycled plastic is cost effective means of meeting expenses
and helps to conserve our resources. Recycled plastic can also
be used to repair highways. Recycled plastic bottles are also
being turned into drainage filtration systems and road
stabilization. Usage of waste plastic in construction of roads is
playing a significant role in both the aspects already discussed
above: Usage of plastics in road construction not only
improves the properties of the road but also creates a path to
utilize the waste plastics in a productive and safe way. The
present Seminar Focuses on Plastic waste being turned into
functional roads in Various countries like India, Australia,
Indonesia, United states. In Indonesia roads are being
constructed using Plastic-Asphalt mix. In India roads are
being constructed using Plastic- Bitumen mix.
“Volkerwessels” a European based construction company is
planning to build
Prefabricated road parts made up of 100% recycled plastic.
We are going know the salient features, advantages of Plastic
roads and also look into various hazards plastic roads may
cause.
CONTENTS
Details
PageNo.
Title page..............................................................................................................I
Certificate............................................................................................................II
AcknowledgmenT...............................................................................................III
Abstract..............................................................................................................IV
Content................................................................................................................V
Chapter 1 Introduction........................................................................................1
Chapter 2 Literature Reviews. ............................................................................2
Chapter 3 Pioneer of the Technique .................................................................. 3
Chapter 4 Dry process of Road construction ..................................................... 4
Chapter 5 Comparison between Tar Road and Plastic Road ..................... ………
5
Chapter 6 Materials Used .................................................................................. 6
Chapter 7 Economy ...................................................................................... ……8
Chapter 8 Case Study ................................................................................... ……9
Chapter 9 Advantages and Disadvantages ................................................ …….10
Chapter 10 Conclusion ............................................................................... ……12
References ................................................................................................... ….13
INTRODUCTION
Those seemingly endless miles of orange barrels lining road construction sites
are turning green as many manufacturers of roadside safety equipments are
using recycled plastic for their products. The benefits of making this switch is
numerous; recycled plastics are being used for guardrail support posts and offset
blocks, signs, energy absorbing elements in crash protection devices and work
zone traffic control and safety systems such as barrels, cones and barricades.
The use of waste plastic is not limited to whatever mentioned above but it has
also entered into the mainstream i.e. Road Construction. Plastic roads are made
entirely of plastic or of composite of plastic with other materials. Plastic is a
family of vast number of polymers, Polyethylene terephthalate (PET),
Polypropylene (PP), and high and low density Polyethylene (HDPE & LDPE)
are some of the common types of plastics used for road construction. With the
increase in human population number of vehicles coming on to the road is also
increasing. This implies that the roads we build are also experiencing increased
traffic resulting in greater loads. The conventional methods of laying roads may
not satisfy the need. Alternative, better and ecofriendly methods are to be
adopted. Plastic roads are one of the best options available currently. Plastic
roads shows lower penetration point, better ductility, better stripping value and
are more durable. This report concentrates on method of road construction using
plastic and various processes involved in it and salient features of plastic roads.
“Necessity is the Mother of Invention” whatever new inventions and
technologies we develop it will have its own pros and consequences. Plastic
roads are not an exception to it. We shall know about all these in detail as we
proceed.
LITERATURE REVIEW
Australian Plastiphalt:
The stone aggregate mix (as per specification) is transferred to the mix cylinder
where it is heated to 165 °C (as per the IRC specification) and then it is
transferred to the mixing puddler (Temperature can be monitored using IR
thermometer), while transferring the hot aggregate into the puddler, calculated
quantity of shredded plastics is sprayed over the hot aggregate
within 30seconds. The sprayed plastic films melt and gets coated over the
aggregate, thus forming an oily coating. Similarly, the bitumen is to be heated to
a maximum of 160 °C in a separate chamber and kept ready (The temperature
should be monitored to have good binding and to prevent weak bonding). At the
mixing puddler, the hot bitumen is added over the plastic
coated aggregate and the resulted mix is used for road construction. The road
laying temperature is between 110 °C to 120 °C. The roller used is normal 8-ton
capacity
The durability of the roads laid out with shredded plastic waste is much more
compared with roads with asphalt with the ordinary mix. Roads laid with plastic
waste mix are found to be better than the conventional ones. The binding
property of plastic makes the road last longer besides giving added strength to
withstand more loads. While a normal 'highway quality' road lasts four to five
years it is claimed that plastic-bitumen roads can last up to 10 years.
Rainwaterwill not seep through because of the plastic in the tar. So, this
technology will result in lesser road repairs.
CASE STUDY
It is a sight many of us abhor. However, when it comes to tackling it, we would probably take
a backseat. The sight of plastic waste littered around is a common sight in most urban
residential areas.
But, brothers Rasool and Ahmed Khan may well help change all that. The duo, who
once ran a bustling business of plastic, graduated to a more meaningful venture of using
discarded plastic for laying roads. The saying “In every adversity lies opportunity”, would
probably be an apt way to describe their venture.
In 1996, when a ban was imposed on plastic bags in Karnataka, the question was “What
next?”. Looking back Rasool states, “Since we had 100 employees who were dependent on us,
we had to look for an alternative. That’s when the idea of recycling plastic and mixing it with
bitumen to lay roads struck us.” In jayanagara area, near the Raja Rajeshwari choultry they
engaged in pothole filling. Soon, they filled 200 to 300 potholes. It was their own initiative.
The wastes collected from sources like apartments, schools and by civic workers were
put into a shredder. The shredded bits were stored in bags for about a week to drain out the
moisture. This was then taken to hot mixing plant located on the outskirts of Bangalore, where
it was mixed with bitumen to make roads. Plastic mixed with Asphalt forms a compound called
“Polymerized bitumen”. This when used in roads withstands Monsoons, everyday wear and
tear. The life span of the road is around 6 to 7 years.
The brothers have laid a total stretch of 1400 km plastic-bitumen road in Bangalore, 2
km in Delhi and 6 km in Hyderabad. There have been inquiries world over, from Sri Lanka,
Bangladesh, Burma and Nigeria. Rasool feels that appropriate policies too are needed to
promote such initiatives.
Plastic waste modified mix is strip resistant even when subjected to worst moisture condition.
Physical properties like Aggregate Impact Value, Los Angles Abrasion Value, Water
Absorption Value and soundness etc. of plastic coated aggregates (PCA) were improved
appreciably as compared to conventional aggregates (without plastic coating) due to thin plastic
coating over aggregates. Plastic waste modified mix consumes less bitumen (OPC = 9% by
weight).
DISADVANTAGES OF PLASTIC ROADS
Cleaning process - Toxics present in the co-mingled plastic waste would start
leaching.
During the road laying process - in the presence of chlorine will release noxious HCL
gas.
After the road laying- It is opined that the first rain will trigger leaching. As the
plastics will merely form a sticky layer, (mechanical abrasion).
The components of the road, once it has been laid, are not inert
CONCLUSION
Construction may be slightly higher compared to the conventional method. However, this
should not deter the adoption of the technology as the benefits are much higher than the cost.
Plastic roads would be a boon for India’s climatic conditions, where temperatures frequently
cross 50°C and torrential rains create havoc, leaving most of the roads with big potholes.
Already, a kilometer-long test-track has been tested in Karnataka using this technology. The
government is keen on encouraging the setting up of small plants for mixing waste plastic
and bitumen for road construction. It is hoped that in near future we will have strong, durable
and eco-friendly roads which will relieve the earth from all type of plastic-waste.
So far, no large scale, systematic approach has been employed to build roads entirely of
plastics. The plastic composite roads do not represent an ideal method, since the plastic is not
exploited for all of its properties, which allow it to be formed into complex structure.
Building roads entirely from plastic opens new possibilities in construction. Construction can
be significantly more efficient, since roads can be created as individual pieces, which can be
switched out in case of damage. This is different from traditional ways of road repair, which
requires large amounts of time on site shaping asphalt to the desired shape.