Professional Documents
Culture Documents
Seismic Force4
Seismic Force4
1.25
1.000
1.000
3.000
1.250
2.000
0.833
140
0.016
0.90
1.4
1.68
1.367
1.680
6
5
1.000
0.4000
0.0992
0.0880
0.1250
0.1250
0.1250
5200.0
0.1250
650.0
Seismic Forces (ASCE 7-10)Tedds calculation version 3.0.10Library item - Seismic titleSite parametersSite
class; BMapped acceleration parameters (Section 11.4.1)at short
period; SS = at 1 sec period; S1 = Site coefficient; ;;at
short period (Table 11.4-1); Fa = at 1 sec period (Table 11.4-2);Fv = Library item - Site
parameters_A-E outputSpectral response acceleration parametersat short period (Eq. 11.4-1); SMS = Fa SS =
at 1 sec period (Eq. 11.4-2); SM1 = Fv S1 = Design spectral acceleration parameters
(Sect 11.4.4)at short period (Eq. 11.4-3); SDS = 2 / 3 SMS = at 1 sec period (Eq. 11.4-4); SD1 =
2 / 3 SM1 = Library item - Des spectr resp accel outputSeismic design categorySeismic risk category; IISeismi
c design category (Sect. 11.6); ELibrary item – SDC E or F outputCalculated fundamental
periodHeight above base to highest level of building;hn = ftFrom Table 12.8-2:Structure type; Reinforce
concrete moment frameBuilding period parameter Ct; Ct = Building period
parameter x; x = Coefficient for upper limit on calculated period (Table
12.8-1) CU = Specified fundamental period; Tspecified =
secApproximate fundamental period (Eq 12.8-7); Ta = Ct (hn)x 1sec / (1ft)x = secCalculated
fundamental period (Sect 12.8.2); T = min(Tspecified,CU Ta) = secLong-period transition
period; TL = secLibrary item – Calculated fund period
outputSeismic response coefficientSeismic force-resisting system (Table 12.2-1); C_MOMENT_RESISTIN
G_FRAME_SYSTEMS 6. Intermediate reinforced concrete moment
framesResponse modification factor (Table 12.2-1); R = Seismic importance factor (Table 1.5-2); Ie =
Seismic response coefficient (Sect 12.8.1.1)Calculated (Eq 12.8-2); Cs_calc = SDS / (R / Ie)
= Maximum (Eq 12.8-3); Cs_max = SD1 / (T (R / Ie)) = Library item: SRC 1
outputMinimum:Eq 12.8-5; Cs_min1 = max(0.044 SDS Ie,0.01) = Eq 12.8-6 (where
S1 >= 0.6); Cs_min2 = (0.5 S1) / (R / Ie) = Cs_min = Seismic
response coefficient; Cs = Library item: SRC 2b outputSeismic base shear (Sect
12.8.1)Effective seismic weight of the structure; W = kipsSeismic response coefficient; Cs = Seismic
base shear (Eq 12.8-1); V = Cs W = kipsLibrary item - Seismic base shear output