You are on page 1of 3

Paniqui Institute of Technology, Inc.

Sta. Rosa St., Paniqui, Tarlac Tel. No. 09388277659/09510184746(045)931-1491

CONSUMER ELECTRONICS SERVICING

PRELIMINARY EXAMINATION
PERFORM MENSURATION AND CALCULATIONS 12
2ND QUARTER

I. Directions: Multiple Choice. Choose the answer. Write the letter only.

__________1. Resistor is a component that resist the flow of_______?


A. Current C. Power
B. Capacitance D. Voltage
__________2. What is the color of the tolerance representing± 5 %?
A. Gold C. Orange
B. Black D. Silver
__________3.What is the value of a resistor with the following colors: Green- Black- Orange –
Gold?
A. 500Ω± 5 % C. 50kΩ ±5 %
B. 5KΩ ±5 % D. 500kΩ ±5 %
___________4. The band in the color coding scheme that permits the value to deviate to a certain
extent?
A. Multiplier C. Limitation
B. Body Color D. Tolerance
__________5. Which component is a discrete type?
A. Power IC C. Resistor
B. Regulator IC D. Digital IC

II. Solve the Following problems: 2pts each

1. Calculate the Resistance value in a closed circuit supplied with 110V and power
consumed in the circuit is 100 watts:

2. A Circuit supplied with 110V carries 5 Amps Current. Calculate the Resistance
value of the circuit.

3. An ohm meter indicates a resistance of 120 volt electric heater to be 8 ohms. what
is the current drawn by the heater?

4. An electric motor rated at 3600 watt is connected to 240 V single phase , 2 wire
circuit what is the current flow in the circuit?
Paniqui Institute of Technology, Inc.
Sta. Rosa St., Paniqui, Tarlac Tel. No. 09388277659/09510184746(045)931-1491

5. A Charging system producing 14.5 Volts with a current flow of 43.5 Amps, what
is the circuit resistance

III. Performance (25pts)

Materials:

10 pieces - Carbon resistors, 1 watt, assorted values

Procedure:
1. Arrange the resistors on a piece of paper in random manner.
2. Identify the colors of the resistors one by one and record them in the resistor tabulation form.
3. Compute for the resistance value of each resistor by following the color coding scheme.
4. Write the value of the resistance in the tabulation form.

IV. Determine the colors of the resistor.

1. 10 Ω±5% 6. 2500 Ω±10%


2. 670 Ω±10% 7. 27,000,000 Ω±5%
3. 130 Ω± 20 % 8. 50 Ω±20%
4. 39,000 Ω±5% 9. 37 Ω±20%
5. 1000 Ω± 10% 10. 87,000 Ω±10%

Prepared By: Checked By:


Ms. JEAN T. GRANDE Ms. Hannah Jhane Cainglet
Electronics Instructor Training Director
Paniqui Institute of Technology, Inc.
Sta. Rosa St., Paniqui, Tarlac Tel. No. 09388277659/09510184746(045)931-1491

Noted By:
Mrs. FLORIDA B. SANTOS, BSE,M.A
School Principal

You might also like