Professional Documents
Culture Documents
Webinar Details-1
Webinar Details-1
W E B I N A R
Course Description
This course is designed to introduce the participants to the theory and practice of reservoir
simulation. Participants will learn about the key tasks, and standard workow to performing
reservoir simulation study, and how to select the proper model for a simulation study. This course
also covers data preparation, pre and post processing tasks, calibration of the reservoir model,
forecasting of future performance, and interpretation of simulation results.
The course is intended to be a series hands-on webinar session, using a real life reservoir dataset
as a case study.
So this means that, at the end of the course, participants will have working knowledge, and be
condent to face practical a RE project.
The course primarily uses the ECLIPSE* simulator. Petrel* RE pre and postprocessor is also used,
where it is necessary. These tools demonstrate key factors in reservoir simulation and the use of
simulators to investigate various reservoir engineering and reservoir management principle
Audience Topics
Reservoir engineers, geoscientists, and other - Geologic Model Review
professionals who are interested in learning the - Fluid Modeling (PVT Analysis)
fundamentals of reservoir simulation applied to - Saturation Functions Modeling (SCAL)
hands-on exercises using ECLIPSE. - Dynamic Model Construction Blackoil)
- Reservoir Compartments (Regions)
*Students taking this course should specify, by - Initialization (Simulation Run)
sending me an email to that effect. - Well Modeling (Lift Curves Generation)
- History Matching
- Sensitivity Analysis
- Forecasting
bit.ly/petrel_re_course - Reporting (Students Submit Report Slides)
Software Applications
- ECLIPSE (Model construction)
- PETREL RE (Grid, properties)
- PVTp (Fluid model)
- PROSPER (Well model)
- MBAL (Material balance)
Bonus
- Access to my Udemy Course,
Fundamentals of Reservoir Simulation, with Petrel RE
- Full Reservoir Dataset
Saturday, 16th. 12 NOON Preparation of Rock Properties: Relative Permeability, from Correlations.
Tuesday, 19th. 5PM Saturation Region (SATNUM) Modeling
Sunday, 17th. 12 NOON Preparation of Fluid Properties: Equation of State PVT Model, with PVTp.
Wednesday, 20th. 5PM PVT Region (PVTNUM) Modeling
Friday, 22nd. 5PM Dynamic Model Construction, INITIALIZATION with ECLIPSE Office:
Thursday, 21st. 5PM First Simulation RUN, and Model QC.
Saturday, 23rd. 12 NOON Preparation for History Matching: Production Data Check, and Schedule
Friday, 22nd. 5PM Modeling. Initial model performance check: History vs Simulation Data.
Sunday, 24th. 12 NOON Sensitivity Analysis: To identify parameters which affect model
Monday, 23rd. 5PM performance. Aquifer Modeling.
Friday, 29th. 5PM Dynamic Model Construction, INITIALIZATION with ECLIPSE Office:
Tuesday, 24th. 5PM First Simulation RUN, and Model QC.
Saturday, 30th. 12 NOON History Matching Process: Tuning identified parameters from sensitivity
Wednesday, 25th. 5PM analysis, Well modeling and Lift curves generation, for simulation.
1. Please go ahead to make payment, to enable proper planning. And signify preferred session.
2. Training begins by 5pm on Friday. You will need to have the following tools available:
1. Petrel RE
2. Eclipse
3. PVTp
4. Prosper
5. Excel.
Do let me know if you need assistance in that regard.
3. The classes will be hands-on Reservoir Engineering Exercises. Where a participant needs
basic explanation, I will refer to the Udemy course:
4. Once I receive your payment details, I will send you a COUPON to access the course for
FREE.
I will also share with you, an INVITE to the Webinar, and a LINK to DOWNLOAD Project
Dataset.
5. Participants will be required to prepare a simulation study reports, to be submitted at the end
of the training.